I've been running LP 5.1.1 using a custom rom but I've been getting tired of the instability of the roms I've tried. I'm wanting to go back to stock KK, am I able to? If so, how? I have a XT1053 and running XenonHD rom. Thanks!
First, start your phone into the Fastboot AP/Bootloader mode...
Unplug phone
Power down phone.
Hold Volume Down and Power
After a few seconds release Power, you should be in Fastboot AP menu on phone.
Take note of the Bootloader version on the 2nd Line. If its 30.B7, then you are fine to just flash the Stock 4.4.4 SBF for the XT1053. To do this, you can use the Requirements and Option 5 listed in the 2nd post of -> http://forum.xda-developers.com/moto-x/general/faq-how-to-prepare-ota-update-carriers-t3126425
If your bootloader is NOT 30.B7, then see -> http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202 before doing any flashing.
My bootloader seems to be 30.B4, is that still safe to use? From what I can tell it's 4.4.2 bootloader.
bloodletting284 said:
My bootloader seems to be 30.B4, is that still safe to use? From what I can tell it's 4.4.2 bootloader.
Click to expand...
Click to collapse
You can always flash NEWER.... so if your bootloader is 30.B4 or 4.4.2, you are perfectly fine flashing 4.4.4 over top.
You just don't want to flash OLDER..
NOTE: Your situation is slightly different than someone running a STOCK 5.x rom. Because you are running a Custom rom that didn't touch your bootloader and other parts, you can flash back to the stock 4.4.4 ROM. If you had installed a full Stock 5.x ROM (like the leaked test versions), it would be a different matter because your bootloader, partition table, trusted zone, and other parts would have been updated too, and would cause issue if you try to downgrade them.
Related
Question: Rather than incrementally update from 4.4 to 4.4.2 by OTA, can I just wait until the full 4.4.2 image is available and flash the full image?
I see a nice list of firmwares here, for example:
http://sbf.droid-developers.org/phone.php?device=0
I'm reluctant to do the update incrementally via OTA or manually, because I don't want to revert from TWRP to stock recovery. As things stand, I believe have a non-stock recovery is preventing me from receiving the OTA that TMobile is currently rolling out.
I have a DevEd GSM and am using TMobile. I'm entirely stock except for TWRP.
Thanks.
Once the US TMobile is available for 4.4.2 you should be able to fastboot (or mfastboot for the system.img) flash the update without losing your recovery. I'm sure someone will post specific steps to update unlocked bootloader, custom recovery phones once the 4.4.2 image is released. I have seen posts warning about not flashing the boot image because it can't be reverted, but I don't know if that affects phones with an unlocked bootloader.
Groid said:
Once the US TMobile is available for 4.4.2 you should be able to fastboot (or mfastboot for the system.img) flash the update without losing your recovery. I'm sure someone will post specific steps to update unlocked bootloader, custom recovery phones once the 4.4.2 image is released. I have seen posts warning about not flashing the boot image because it can't be reverted, but I don't know if that affects phones with an unlocked bootloader.
Click to expand...
Click to collapse
It does affect the unlocked bootloader people, that is why some people are waiting for the sbf. If you update via the OTA, it will install the new bootloader, regardless of lock status. Once on this new 4.4.2 bootloader, it is impossible to flash any stock images before 4.4.2 (you cannot go back to 4.4 or 4.4.2).
But why would you want to go back if you have an unlocked bootloader already? I don't really see any reason to flash an image that is earlier than the latest... if I were Moto, I would let people flash the earliest system image of that version of android (4.4 kitkat in our case). This would rectify the root situation (because 4.2.2 isn't kitkat), and it would keep the people happy as well.
varxx said:
Question: Rather than incrementally update from 4.4 to 4.4.2 by OTA, can I just wait until the full 4.4.2 image is available and flash the full image?
I see a nice list of firmwares here, for example:
http://sbf.droid-developers.org/phone.php?device=0
I'm reluctant to do the update incrementally via OTA or manually, because I don't want to revert from TWRP to stock recovery. As things stand, I believe have a non-stock recovery is preventing me from receiving the OTA that TMobile is currently rolling out.
I have a DevEd GSM and am using TMobile. I'm entirely stock except for TWRP.
Thanks.
Click to expand...
Click to collapse
You absolutely can manually flash the system image while having the 4.4 bootloader, you can also flash any 4.4.2 stock based ROM such as the 1052 European ROM that showed up today.
I was actually running the gummy ROM 4.4.2 while still on the 4.4 bootloader without any issue
Sent on my Gummy running Lenoto X
Hello, I have upgraded to 5.0.2. via OTA a few days ago. My phone was RetEU .23, and the update notification that 5.0.2. became so annoying, so I decided to give it a shot. Lollipop is a disappointment for me, battery drain issues, lagging all over the menus, slow dialer, the phone was running better with KK installed, so I want to return back to 4.4.4.
Unfortunately there is no clear opinion whether this could be done, some say that when you have 5.0.2. bootloader installed with the OTA, you cannot go back, others say that it is no problem to do so. Really confusing.
Anyone tried to go back to 4.4.4. after getting the OTA? Could you please share how did you do so? Unlocking the bootloader and flashing one of the 4.4.4 stock ROMs from the General Section?
dub_1 said:
Hello, I have upgraded to 5.0.2. via OTA a few days ago. My phone was RetEU .23, and the update notification that 5.0.2. became so annoying, so I decided to give it a shot. Lollipop is a disappointment for me, battery drain issues, lagging all over the menus, slow dialer, the phone was running better with KK installed, so I want to return back to 4.4.4.
Unfortunately there is no clear opinion whether this could be done, some say that when you have 5.0.2. bootloader installed with the OTA, you cannot go back, others say that it is no problem to do so. Really confusing.
Anyone tried to go back to 4.4.4. after getting the OTA? Could you please share how did you do so? Unlocking the bootloader and flashing one of the 4.4.4 stock ROMs from the General Section?
Click to expand...
Click to collapse
Hello,
i actually switched from 5.0.2 back to KK 4.4.4 from Pizza_dox
when your bootloader is unlocked and you have TWRP installed
follow these instructions
1, go do a factory reset
2, go to advanced wipe and select :dalvik cache/system/data/internal storage/cache
when you did that there is no system on your phone so when you restart you will be going into an endless bootloop.
3, go press install and select the Microkat.zip file from Pizza_Dox
when that is done you have agian kitkat on your device
i think there some other methods but this is how i did it succesfully.
Also dont forget to make a backup because you will lose everything.
Gerriitw said:
Hello,
i actually switched from 5.0.2 back to KK 4.4.4 from Pizza_dox
when your bootloader is unlocked and you have TWRP installed
follow these instructions
1, go do a factory reset
2, go to advanced wipe and select :dalvik cache/system/data/internal storage/cache
when you did that there is no system on your phone so when you restart you will be going into an endless bootloop.
3, go press install and select the Microkat.zip file from Pizza_Dox
when that is done you have agian kitkat on your device
i think there some other methods but this is how i did it succesfully.
Also dont forget to make a backup because you will lose everything.
Click to expand...
Click to collapse
Thanks for your comment. I actually plan to go back to the stock 4.4.4. I have a basic idea of bootloader and things but not deep into this and have never done it before. From what I have read , I will have to:
1. First I need to unlock the bootloader, as per the instructions in the Moto website.
2. Then I will need to do a factory reset. (settings-secuirity-factory reset or some other way of doing this?)
3. Download 4.4.4 firmware + script.
4. Start up with Power+VolDown buttons and have bootloader menu on screen
5. Run the downloaded script from its .bat file.
6. Wait for some time for the flashing to end, then have stock 4.4.4
Please correct me if something is wrong or missed.
dub_1 said:
Thanks for your comment. I actually plan to go back to the stock 4.4.4. I have a basic idea of bootloader and things but not deep into this and have never done it before. From what I have read , I will have to:
1. First I need to unlock the bootloader, as per the instructions in the Moto website.
2. Then I will need to do a factory reset. (settings-secuirity-factory reset or some other way of doing this?)
3. Download 4.4.4 firmware + script.
4. Start up with Power+VolDown buttons and have bootloader menu on screen
5. Run the downloaded script from its .bat file.
6. Wait for some time for the flashing to end, then have stock 4.4.4
Please correct me if something is wrong or missed.
Click to expand...
Click to collapse
What i did...
Download the correct kk stock rom
Setup my drivers and mfastboot correctly (simple fast boot works too)
Unlocked bootloader. (Voids warranty coz gives bootloader status 3)
Reboot in bootloader now...
Flash all files of kitkat except gpt.bin and motoboot.bin (they never flash for me lol )
Flash all other files (i typed filenames manually)
Fastboot reboot
Ps - no matter what i do..i have not been able to lock my bootloader once i downgraded from 5.0.2 to 4.4.4
Locking bootloader works well on 5.0.2
doctor_droid said:
What i did...
Download the correct kk stock rom
Setup my drivers and mfastboot correctly (simple fast boot works too)
Unlocked bootloader. (Voids warranty coz gives bootloader status 3)
Reboot in bootloader now...
Flash all files of kitkat except gpt.bin and motoboot.bin (they never flash for me lol )
Flash all other files (i typed filenames manually)
Fastboot reboot
Ps - no matter what i do..i have not been able to lock my bootloader once i downgraded from 5.0.2 to 4.4.4
Locking bootloader works well on 5.0.2
Click to expand...
Click to collapse
well guess im gonna try - but no need to do, as makes no difference except to downgrading.... So best off unlocked
simply use the 4.4.4 link in my signature and pick firmware 2 or B called DSDSALL to go back to 4.4.4 .23 ret(xx)
So, it has been confirmed by several forums that when you have officially received the 5.0.2 OTA download update, you cannot go back to KK.
It has something to do with the new L bootloader. I guess that there is no way of doing this, up to now at least. Don't know if someone has tried and succeeded.
When you have flashed the 5.0.2. OTA however, you can have KK installed back, as most of the users on xda.
dub_1 said:
So, it has been confirmed by several forums that when you have officially received the 5.0.2 OTA download update, you cannot go back to KK. FALSE
It has something to do with the new L bootloader. I guess that there is no way of doing this, up to now at least. Don't know if someone has tried and succeeded. FALSE
When you have flashed the 5.0.2. OTA however, you can have KK installed back, as most of the users on xda.
Click to expand...
Click to collapse
YES you can install kitkat see my signature you NEED a unlocked boot loader
I have been up / down and sideways with ALL 4 versions ( 3 kitkat 1 Lollipop) of XT1068 firmware 50+ installs , a few soft bricks - also installed a few custom roms - gone back to lollipop and kitkat from these too.
see my signature for 4.4.4 and 5.0.2 firmware xt1068
reefuge said:
YES you can install kitkat see my signature you NEED a unlocked boot loader
I have been up / down and sideways with ALL 4 versions ( 3 kitkat 1 Lollipop) of XT1068 firmware 50+ installs , a few soft bricks - also installed a few custom roms - gone back to lollipop and kitkat from these too.
see my signature for 4.4.4 and 5.0.2 firmware xt1068
Click to expand...
Click to collapse
Cheers mate. Already installed stock 4.4.4.
Does it make sense to relock the bootloader?
dub_1 said:
Cheers mate. Already installed stock 4.4.4.
Does it make sense to relock the bootloader?
Click to expand...
Click to collapse
no absolutely not....... boot logo warning still comes up ...warranty still void and strangely if been to 5.0.2 and back to 4.4.4 it wont relock
but you can relock if on 5.0.2
Successful downgrade from 5.0.2 to 4.4.4
Dear All,
Pls help me in downgrading from 5.0.2 to 4.4.4 on my XT1068 Dual Sim Indian Version.
I need to know whether we can return to 4.4.4 without unlocking bootloader and is rooting needed.
Pls let me know your experience in a noob friendly way.
TIA... :angel:
dub_1 said:
Cheers mate. Already installed stock 4.4.4.
Does it make sense to relock the bootloader?
Click to expand...
Click to collapse
What exactly did you do? His signature is gone...
Hi, I've been canvassing a few threads trying to work out exactly what's needed to take my xt1058 to 5.1. I'm currently on Cyanhacker 5.0.2 nightly rom built on Mar-3, with TWRP recovery. To get here I had to do the CM11 -> CM12 based rom boot trick if it's important.
If I want to go to the official 5.1 ROM, is this the best path, or will I brick the device somehow? http://forum.xda-developers.com/moto-x/general/how-to-install-5-1-lollipop-moto-x-t3089594
I'm fairly certain trying to go from 5.0.2 back to 4.4.4 will end badly, so this seems safer?
I've also spotted this, but not sure if this is better than the above option? http://translate.google.com.au/tran...ipop-51-stock-moto-x-2013-xt1058/&prev=search
Could someone please let me know which is the best path?
If you are talking about flashing to a custom or 3rd party rom based on 5.1, follow the ROM makers recommendation.
That being said... If you want a STOCK 5.1 rom.... then...
Because you are on a custom or 3rd party rom now, you need to check your bootloader version.. Boot to the Fastboot AP screen (aka bootloader screen) and the 2nd line will have the version.
If you have either 30.BC or 30.BD, your best bet is to sit tight and wait for a Stock Moto SBF of 5.1 to leak for your device/carrier, then flash that.
If you have 30.B7 or lower, find the appropriate Stock SBF for your carrier/model device, and flash it using either mFastboot or RSDLite.
Thanks for clarifying! I was looking to go from custom rom back to stock 5.1 (missing all the Moto features). My bootloader is 30.B4, so it should be okay to flash a carrier FXZ for XT1058 as per the Brazil moto forum link I posted?
I assume this will blast my custom recovery as well, so I'd have to re-apply TWRP and root?
EDIT: Actually this version seems to have TWRP? http://translate.googleusercontent....-root/&usg=ALkJrhgUAWS_u0rYHHVrsBRy4w5DG4VdvA
Can someone confirm that to update from Android 4.2.2 Rooted & S-Off to Android 5.0.1 while maintaining Root and S-Off, I just need to flash a custom ROM based on Android 5.0.1?
I would like the updates and particularly compatibility with recent apps, as I've fallen behind on versions (4.2.2 being evident of that).
I've read around several threads on the forum and have been getting conflicting understandings (most likely my interpretations, not so much the actual wording). For reference,
http://forum.xda-developers.com/htc-one-m8/help/how-perform-ota-update-to-lollipop-t3026182
http://forum.xda-developers.com/ver...-to-update-to-lollipop-rooted-htc-m7-t3111435
The second link suggests flashing santod's ROM should do the trick.
Based on santod's walkthrough, since I am on KitKat 4.2.2 and firmware/software number 1.10.605.15, I would:
Flash the 1.10.605.15 firmware from the boot menu (holding power when phone is turning on and loading the zip),
Flash the Firmware Combo for m7vzw Lollipop using adb
Don't need to do Radios or Kernel because those were previously included,
But do flash recovery
Let phone boot and all set on Lollipop
Is this correct, or do I need to flash a recovery or something to be able to update to something running Lollipop?
Thanks!
gravitach007 said:
Can someone confirm that to update from Android 4.2.2 Rooted & S-Off to Android 5.0.1 while maintaining Root and S-Off, I just need to flash a custom ROM based on Android 5.0.1?
I would like the updates and particularly compatibility with recent apps, as I've fallen behind on versions (4.2.2 being evident of that).
I've read around several threads on the forum and have been getting conflicting understandings (most likely my interpretations, not so much the actual wording). For reference,
http://forum.xda-developers.com/htc-one-m8/help/how-perform-ota-update-to-lollipop-t3026182
http://forum.xda-developers.com/ver...-to-update-to-lollipop-rooted-htc-m7-t3111435
The second link suggests flashing santod's ROM should do the trick.
Based on santod's walkthrough, since I am on KitKat 4.2.2 and firmware/software number 1.10.605.15, I would:
Flash the 1.10.605.15 firmware from the boot menu (holding power when phone is turning on and loading the zip),
Flash the Firmware Combo for m7vzw Lollipop using adb
Don't need to do Radios or Kernel because those were previously included,
But do flash recovery
Let phone boot and all set on Lollipop
Is this correct, or do I need to flash a recovery or something to be able to update to something running Lollipop?
Thanks!
Click to expand...
Click to collapse
I didn't read everything in the links u posted, but the update to 5.0.2 will NOT remove S-off or turn u back to S_on, and will not re-lock bootloader, but it will remove root, but since it doesn't relock bootloader, all u have to do is re-flash custom recovery in fastboot , and then re-flash supersu from custom recovery.
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Question:
To upgrade to 5.1 do I just need to revert back to stock boot loader and do an OTA update?
Will the OTA re-lock my boot loader?
After the upgrade to 5.1 do I just reload TWRP recovery and flash SU for root access again?
No the new updates do not relock the bootloader. I suggest you first try out the Lollipop by flashing it through latest version of TWRP. If you think you can live with it than just flash complete stock through rsdlite or manually by fastboot. Reason I say that is because once you take the OTA it will update both bootloader version and the partition tables which means you won't be able to revert back to a lower Android version without the risk of bricking your device.
Sent from my Moto X
bushako said:
No the new updates do not relock the bootloader. I suggest you first try out the Lollipop by flashing it through latest version of TWRP. If you think you can live with it than just flash complete stock through rsdlite or manually by fastboot. Reason I say that is because once you take the OTA it will update both bootloader version and the partition tables which means you won't be able to revert back to a lower Android version without the risk of bricking your device.
Sent from my Moto X
Click to expand...
Click to collapse
I don't want to go back to complete stock, I want to keep bootloader unlocked and root. Is there a stock rooted rom out there I can flash w/ TWRP without having to do OTA or flashing the recovery back to stock?
Yes there is its in the development section. You'll read the thread something like xt1053 stock flash-able. It contains only the kernel and system files so you should be good.
Here http://forum.xda-developers.com/showthread.php?t=3155843
Sent from my Moto X
-RanZ- said:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Question:
To upgrade to 5.1 do I just need to revert back to stock boot loader and do an OTA update?
Will the OTA re-lock my boot loader?
After the upgrade to 5.1 do I just reload TWRP recovery and flash SU for root access again?
Click to expand...
Click to collapse
First off, there is no Verizon 5.1 yet. So any 5.1 you try will be for a different model, and if you flash a full rom, it will have different radios (which don't work for CDMA that Verizon still uses for voice/3g data. If you keep your stock VZW radio files, keep in mind they will be on a different version than the rest of the rom which could cause some inconsistencies and issues. IF you do flash a FULL SBF, you will be stuck with no SAFE way to revert to 4.4.4 due to GPT.BIN/Motoboot.img (for more on this, see the link in my signature), and you'll have to wait for the Verizon 5.1 SBF to get back to Verizon's rom.
Next, to install an OTA update, when it becomes available, you need STOCK RECOVERY on your phone. The OTA also does a pre-flash check/validation of your phone before it flashes, so if anything it looks for is not what it expects, the OTA will fail. Because of that you need to be 100% stock, or very near to it.
Finally, NO, an OTA will not relock your bootloader, nor will flashing an SBF.
For more on taking an OTA, see the link in my signature on OTA Updates..
That being said, if you TRY a 5.1 rom that is out there for another model you best bet is to find one that is a TWRP back up of 5.1 installed on someone's phone, since it only updates system.img and boot.img. It may not work 100% (because part of your phone will still have the 4.4.4 files), but it will give you a taste and you could later revert back to the stock 4.4.4 which you currently have on your phone. IF you flash a FULL SBF, you might be stuck with no way to revert to 4.4.4 due to GPT.BIN/Motoboot.img (for more on this, see the link in my signature)
Hi Bushako, I've Moto X Verizon XT1060 and it's struck in 4.2.2 android. When I try to update using setting, about phone and system update it show there is no update available but the android version on it is 4.2.2
5.1 is available for Verizon Moto X 1st gen now isn't it? I am googling for a detailed process on how to update from 4.2.2 to 5.1 and keeping root but not having any luck finding anything. Is it easy to update from 4.2.2 stock rooted to 5.1? The specs of my phone are the same as the original post:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
-RanZ- said:
5.1 is available for Verizon Moto X 1st gen now isn't it? I am googling for a detailed process on how to update from 4.2.2 to 5.1 and keeping root but not having any luck finding anything. Is it easy to update from 4.2.2 stock rooted to 5.1? The specs of my phone are the same as the original post:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Click to expand...
Click to collapse
Aug 1, when I last posted in this thread, Verizon 5.1 wasn't available. It is now.
As for updating and keeping root, there are a few ways to do it. Since you say your Bootloader is unlocked, the best way is flash 5.1 SBF, and use the process of flashing TWRP and SuperSU to root and have Write protection Disabled (see -> http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217 ). If you're bootloader isn't unlocked yet, and if you are on 4.4.2 or lower and have NEVER upgraded to 4.4.4 or 5.1, use Sunshine to unlock the bootloader FIRST
If you're bootloader isn't unlocked, there is only one way to root 5.1, but it doesn't disable write protection, and its risky because it intentionally soft bricks the phone back to the Qualcomm HS-USB QDLoader mode.
KidJoe said:
Aug 1, when I last posted in this thread, Verizon 5.1 wasn't available. It is now.
As for updating and keeping root, there are a few ways to do it. Since you say your Bootloader is unlocked, the best way is flash 5.1 SBF, and use the process of flashing TWRP and SuperSU to root and have Write protection Disabled (see -> http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217 ). If you're bootloader isn't unlocked yet, and if you are on 4.4.2 or lower and have NEVER upgraded to 4.4.4 or 5.1, use Sunshine to unlock the bootloader FIRST
If you're bootloader isn't unlocked, there is only one way to root 5.1, but it doesn't disable write protection, and its risky because it intentionally soft bricks the phone back to the Qualcomm HS-USB QDLoader mode.
Click to expand...
Click to collapse
Bootloader is unlocked, I get the warning every time I restart the phone.
Where can I find the SBF files? Every post I find from a search the links do not work.
Are the SBF files stock or from someone else's phone?
Do I flash the files with my currently installed TWRP?
When I flash the SBF does it remove TWRP so I have to re flash it?
Are there any radio upgrades/do they get done w/ the SBF?
Sorry if these are basic questions, I have not done much phone rooting since my old HTC Incredible.
-RanZ- said:
Bootloader is unlocked, I get the warning every time I restart the phone.
Where can I find the SBF files? Every post I find from a search the links do not work.
Are the SBF files stock or from someone else's phone?
Do I flash the files with my currently installed TWRP?
When I flash the SBF does it remove TWRP so I have to re flash it?
Are there any radio upgrades/do they get done w/ the SBF?
Sorry if these are basic questions, I have not done much phone rooting since my old HTC Incredible.
Click to expand...
Click to collapse
There is a link in my signature to a thread containing the known places that were hosting the SBF/FXZ files. That is the only place I can suggest you look.
SBF/FXZ files I'm taking about are stock, and digitally signed by Motorola. They can be flashed on phones with locked or unlocked bootloaders. NOTE: make sure you get the SBF for your device model and carrier!!
You flash these via Mfastboot or RSDLite. When using these tools you are flashing back to stock. After you get the SBF file, see -> http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 and read the REQUIREMENTS section, and pick either Option 3, 4 or 5 to actually flash (only use one option. which ever you find the easiest. Do NOT use Option 1 or 2 as they would not apply to your situation). I usually recommend option 5.
Yes, the process of flashing the entire SBF will overwrite TWRP with stock recovery. You'll need to flash it later as part of the rooting process.
Yes there are radio updates in the newer SBF files.
So basically, you flash to stock 5.1 by using the SBF files (following the requirements and ONE of the options in http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 again,I usually recommend option 5), then root by following http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217
One other tip... Make a back up of your phone BEFORE YOU FLASH. copy all data from the /sdcard area to your PC, make a list of all your apps, etc. And seriously consider erasing your UserData while flashing (wipes the phone clear), or doing a factory reset before you flash.
I only say this because 5.1 seems more stable (and less buggy) if a factory reset is done before/during the upgrade process.
EDIT: The 5.1 SBF file you want for a Verizon XT1060 is GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip and is available from -> http://motofirmware.center/files/category/11-moto-x-1st-generation/
KidJoe said:
There is a link in my signature to a thread containing the known places that were hosting the SBF/FXZ files. That is the only place I can suggest you look.
SBF/FXZ files I'm taking about are stock, and digitally signed by Motorola. They can be flashed on phones with locked or unlocked bootloaders. NOTE: make sure you get the SBF for your device model and carrier!!
You flash these via Mfastboot or RSDLite. When using these tools you are flashing back to stock. After you get the SBF file, see -> http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 and read the REQUIREMENTS section, and pick either Option 3, 4 or 5 to actually flash (only use one option. which ever you find the easiest. Do NOT use Option 1 or 2 as they would not apply to your situation). I usually recommend option 5.
Yes, the process of flashing the entire SBF will overwrite TWRP with stock recovery. You'll need to flash it later as part of the rooting process.
Yes there are radio updates in the newer SBF files.
So basically, you flash to stock 5.1 by using the SBF files (following the requirements and ONE of the options in http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 again,I usually recommend option 5), then root by following http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217
One other tip... Make a back up of your phone BEFORE YOU FLASH. copy all data from the /sdcard area to your PC, make a list of all your apps, etc. And seriously consider erasing your UserData while flashing (wipes the phone clear), or doing a factory reset before you flash.
I only say this because 5.1 seems more stable (and less buggy) if a factory reset is done before/during the upgrade process.
EDIT: The 5.1 SBF file you want for a Verizon XT1060 is GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip and is available from -> http://motofirmware.center/files/category/11-moto-x-1st-generation/
Click to expand...
Click to collapse
I will give this a try if I can locate the correct SBF files, your information has helped greatly, Thanks!
nevermind, google fixed me.