Could someone please give me the PIT file for our device? I would extract myself, yet I need root. Being on a Linux computer I cannot run Odin without the proper PIT file for my SM-N910T. If anyone can post this or a link so I may obtain it, there is beer or some cash your way. PLEASE HELP ME!!!
Related
If you open the .tar file you find the "zimage" "pram.lfs" modem.bin" "farctory.rfs" "cache.rfs"
my question is, If I remove all the files except the modem.bin and put this in odin as phone will this update my modem only? Keeping my firmware etc.
Thanks,
Luke.
Bump!
Can anyone answer this?
I don't want to just try it and end up having to flash again
Hey guys!
For all the owners out there who have the S4 Active running 4.4.2 NC9 with the MF1 modem.bin, don't worry anymore!
If you're rooted, you should be able to do this, and if not, have a computer with Linux or a Terminal emulator for Windows.
Follow this link and it should teach you how to extract files in a tar.md5 format to flash through ODIN. Someone can extract their NC9 modem.bin and upload it for the rest of everyone having problems.
If you're wondering why I didn't do it myself, ask my parents XD
As always, leave any comments below, and you're welcome!
OH and another things, this is really for the owners that don't have the NC9 modem.bin (and NON-HLOS.bin), that's really it. Other than that, you an use it for whatever. Credit does not go to me, I only found it on Google, credit goes to the poster on the forum the link has you following.
I think when I flashed with odin to get root access, something messed up and now I only have 16GB showing.
If someone has it please give me a link to the 32GB pit file which I believe would help fix it.
Thanks!
Does anyone have the PIT file for a 32GB SM-G900A please? Thanks!
Hi all, please help me out on this. I got a problem of "boot loop" on this T-mobile Note 4 - SM-N910T after update to 6.0.1. I saw a post that said you can flash with SM-N910T3 and then you can downgrade to 4.4.4 kitkat. I used Odin to load SM-N910T3 (got it from Sammobile) to my SM-N910T, but I think I got myself into more problem. While I was flash using Odin, the fail message display like this:
ODIN: flash read failure
ERROR: Thereis no pit binary
Can anyone explain to me why is this happening? What can I do to fix this problem?
Note: I never root my phone before and don't know how. I did some searching and see people flash Pit File but also there are some warning that you should not flash pit file unless you know what you are doing. In this case, I'm a newbie and my knowledge about flashing or rooting is very limited that is why I'm so hesitate to flash pit file, so please take it easy on me. Please show me what to do or where to look for this problem. Thanks in advance for any input!
Leo T said:
Hi all, please help me out on this. I got a problem of "boot loop" on this T-mobile Note 4 - SM-N910T after update to 6.0.1. I saw a post that said you can flash with SM-N910T3 and then you can downgrade to 4.4.4 kitkat. I used Odin to load SM-N910T3 (got it from Sammobile) to my SM-N910T, but I think I got myself into more problem. While I was flash using Odin, the fail message display like this:
ODIN: flash read failure
ERROR: Thereis no pit binary
Can anyone explain to me why is this happening? What can I do to fix this problem?
Note: I never root my phone before and don't know how. I did some searching and see people flash Pit File but also there are some warning that you should not flash pit file unless you know what you are doing. In this case, I'm a newbie and my knowledge about flashing or rooting is very limited that is why I'm so hesitate to flash pit file, so please take it easy on me. Please show me what to do or where to look for this problem. Thanks in advance for any input!
Click to expand...
Click to collapse
Flash n910t2 kitkat not the n910t3.
Hello kies in not working while upgrading my gear to tizen and odin is getting stuck. so i need pit file to flash tizen using odin...
No pit file needed. I had this problem when flashing Tizen through Odin. Turns out, I wasn't using the right firmware file. You are probably using a tar file that is 200-400 megs. The one I flashed was 640 megs. I can't remember where I got it from, but if you can't find it, I would gladly post a link.
tell me how and ill check if i can do it
calahorn said:
No pit file needed. I had this problem when flashing Tizen through Odin. Turns out, I wasn't using the right firmware file. You are probably using a tar file that is 200-400 megs. The one I flashed was 640 megs. I can't remember where I got it from, but if you can't find it, I would gladly post a link.
Click to expand...
Click to collapse
Hi there, Could I get a copy of the link please?? I ran into the same problem. Luckily i can restore back but it puts me back on BNC1 4.2.2 JB and would like to go back to Tizen.
Edit....
Never mind!!! Got it sorted..