Database Develop

How to unbrick Gionee m2 device

This Thread Is Meant For Unbricking Gionee M2 Device.
Gionee M2 is an awesome device with mediatek 6582 super fast quad core processor loaded with Mali-400 Gpu.Unfortunately I had hardbricked this device thanks to avi3230 for helping me out.Gionee m2 is also rebranded as walton primo hm.
Note:-This is my first thread please tell me if there any mistakes or u won't understand any part of it.All the links have been uploaded by me so if u get any download error let me know.
Important: Download and install gionee phone drivers from here or the process will fail and please read all the points.
Methods:-Using Sp Flash Tools Use tool provided in link don't use old version
NOTE:-For sd ram fail error 4032 u need windows xp to unbrick since installing drivers in windows 7 is big mess which u have to do manually so install xp then do this
Update: camera fix download fromDownload video tutorial from [URL="https://www.sendspace.com/file/n2vvi0"]here
Update:- Since many of u people know gionee had launched kitkat update which is done through flash tools and I knew many of u would have bricked your phone so don't worry just follow the steps and use the kitkat firmware downloaded from gionee site if u want jelly bean then download the flash files provided in post and follow the steps use windows xp.
For SoftBricked Gionee M2 device(Devices that are powering up but only in boot loop or other problems follow this).
Instructions:-
1.Download and extract sp flash tools from here
2.Download the Custom recovery image file that will be flashed on your device from here
3.Extract sp flash tools and open flash tools.
4.Click on scatter loading select MT6582_Android_scatter.txt from new recovery working folder.
5.Check if PRELOADER is highlighted as red or not then continue if its normal then u are good to go.
6.If you have good battery life then keep following these steps or see meta-mode below.
7.Click on download button then attach your usb to phone with your battery inserted the port will be detected and downloading will start.
8.First it will be red then final color will be yellow which means its downloading then it will show download complete.
9.Reboot into recovery it will be CTR recovery do a factory reset then reboot the phone.Voila!!Phone is unbricked:good:
10.If any problems install stock rom through ctr select install zip from sd card
Note:-For going back swipe left.
10.Download and install stock rom from here
12.You can copy this rom to your device using mount usb from mount and storage option.
13.After rom is installed do a factory reset from ctr.
META-MODE Guide:-
Instructions:-
1) Switch OFF Phone..
2) Remove Battery..
3) Click on Download or Format all + download according to what you're following.
4) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
5) Hold the button till flashing completes...
6) After 100% Flash,Release Button..
7)Follow from step 9 Above or for hard brick phone follow step 10 from below.
For HardBricked Gionee M2 device(Devices that don't even powerup).
Instructions:-
1.Download and extract sp flash tools from here
2.Download the flash files from here links:
Part-1:-https://ad f.ly/1C8fM0 (ignoreadded in between)
Part-2:-https://ad f.ly/1C8gmb
3.Extract the files then open flash tools.
4.Click Scatter loading and select scatter file MT6582_Android_scatter.txt from M2 stock files folder.
5.If you had previously flashed wrong rom and hardbricked your device then select format all+download otherwise select download only.
6.Check if PRELOADER is highlighted as red or not then continue if its normal then u are good to go.
7.If you have good battery life then keep following these steps or see meta-mode above.
8.Click on download button then attach your usb to phone with your battery inserted the port will be detected and downloading will start.
9.First it will be red then final color will be yellow which means its downloading then it will show download complete.
10.Now check if your phone is rebooting it will reboot :good: if not rebooting it means it has no battery life just put it on charging while charging it will go in boot loop don't worry its charging ignore it leave it for 30 minutes atleast.
11.Now switch off again then flash custom recovery by following softbricked gionee m2 device instructions.
After flashing files on HardBricked devices.
Your problems are not still finished now after your phone has started u will see invalid imei error .Don't worry u can solve it easily.But if you are not getting this error then don't follow this
Instructions:-
1.First remove battery and copy both M_IMEI And S_IMEI numbers and write it on notepad or anywhere.
2.Download and install mobile uncle tools apk from here
3.Open it and go to engineer mode then for Engineer mode[mtk]
4.Go to connectivity then CDS information.
5.Go to Radio information then phone 1.
6.You will see AT+ and at bottom send command click on AT+ and retype AT+ automatically u will see AT+EGMR=1,7"" and other options.
7.select AT+EGMR=1,7"" and type M_IMEI number in inverted comma's.like this AT+EGMR=1,7"Your Imei number"
8.Click on send command if it shows command is msent then good for u.
9.go back select phone follow step 6 and select 1,10"".
10.Type S_IMEI like u did before in comma's then send command.
11.If command is msent reboot your phone.
12.Then
And sorry now l don't reply on whatsapp so leave a comment I'll be sure to replyIF I HELPED YOU DON'T SAY JUST PRESS THE THANKS BUTTON:good::good::good::good:

No matter what i do, i keep getting S_FT DRAM FAIL ERORR 4032
I previously flashed my phone with the gionee me unofficial 4.2.2, it completed but wont power on and it not flashing any other rom i try

Gionee m2
rhyme4u12 said:
No matter what i do, i keep getting S_FT DRAM FAIL ERORR 4032
I previously flashed my phone with the gionee me unofficial 4.2.2, it completed but wont power on and it not flashing any other rom i try
Click to expand...
Click to collapse
Send me the screenshot use the latest version of flash tools i have uploaded in my post and also download the flash files u don't have to panic u have flashed gionee m2 rom i had flashed gionee g150 some ****ty rom with same specs just follow the steps it will be ok.Contact me if any probs if u stay in mumbai,maharashtra then u could come at my place i will flash for u.
Regards,
Saif Shaikh

My GIONEE M2 is with 1GB ram and 8GBrom, it a version for nigerians, Please can you help me get the stock files. I think it different from yours that's why its not flashing...
My DEVICE:
GIONEE M2
QUAD CORE
1GB RAM
8GB ROM
Please help me beacuse i learnt your own version is 4GB rom

It finally worked for me yesterday using Windows XP,

rhyme4u12 said:
It finally worked for me yesterday using Windows XP,
Click to expand...
Click to collapse
Pls guy I. Hv tried all I cn to hardbrick my own but no result... Pls hw do use window xp to flash urs bcz mine now is not on at all.if I press d power button only the flash light at the back will just blick... Pls I need help.... Here is my number pls call me and I'll call u back 08060389002

gionee m2
onajite said:
Pls guy I. Hv tried all I cn to hardbrick my own but no result... Pls hw do use window xp to flash urs bcz mine now is not on at all.if I press d power button only the flash light at the back will just blick... Pls I need help.... Here is my number pls call me and I'll call u back 08060389002
Click to expand...
Click to collapse
No WhatsApp now

Thanxx rebirth for my m2
Thanxx Saif for helping.It worked.Finally I unbricked my M2

mr
Thanks very much finally I unbreak my daed gionee M2,may God bless U sir @bachir[email protected]
+2348036706644.add mi on whatsapp for live testimony.u r great my Master

Cannot download the the last flash file !
I cannot download the last file from those four file links ..... Can someone please suggest me an alternate link to that 1.83 MB file
Thank You

Il
Volzio said:
I cannot download the last file from those four file links ..... Can someone please suggest me an alternate link to that 1.83 MB file
Thank You
Click to expand...
Click to collapse
Hey bro thanks for commenting the prob I will reupload the file

Gg_hacker said:
Hey bro thanks for commenting the prob I will reupload the file
Click to expand...
Click to collapse
Worked like a charm ..
Thanx

Gg_hacker said:
Call me on my number or whatsapp me +919619006588
Click to expand...
Click to collapse
Dear gurus; URGENT
I update to kitkat 4.4.2 on gionee m2 in Nigeria but my rear (back) camera disappear and stops working afterwards. I had invalid IMEI issue too but I have resolve this. Please how can I resolve the CAMERA issue?
Thanks in anticipation

Unbrick fail
I tried updating my Gionee M2 to the official KitKat ROM from their site, after following every step (I used a window XP SP3), after the initial red coloured bar, I got this message " S_FT DRAM FAIL ERORR 4032 ", now my phone can't boot up, I followed your ubricking step to go back to JB Stock ROM but still getting same message " S_FT DRAM FAIL ERORR 4032 ". I have tried all I could but same message keeps popping up, please is there something I am missing or doing wrong, please help.

cygnis said:
I tried updating my Gionee M2 to the official KitKat ROM from their site, after following every step (I used a window XP SP3), after the initial red coloured bar, I got this message " S_FT DRAM FAIL ERORR 4032 ", now my phone can't boot up, I followed your ubricking step to go back to JB Stock ROM but still getting same message " S_FT DRAM FAIL ERORR 4032 ". I have tried all I could but same message keeps popping up, please is there something I am missing or doing wrong, please help.
Click to expand...
Click to collapse
Am having this same issue hrere. someone help us out pleeeeeeeeeeeaaaaasssee

Dear cygnis and obiomon reinstall the drivers and use another USB port follow this also first just use format all +download all then after format 100% it will show error then again senesce "download only" and flash it should flash properly and use meta mode steps mentioned in this post.

help
Great work.. kudos.
But am getting PMT CHANGED FOR ROM IT MUST BE DOWNLOADED error ... what do i do please?

rhyme4u12 said:
It finally worked for me yesterday using Windows XP,
Click to expand...
Click to collapse
Hello.
Please did u follow the same process or u did something else cause i keep getting "PMT ROM changed EERROR it must ne downloaded"
Please help my number is +2348029615972 whatsapp me or send ur number.

For those who are still having problems using SP flash tool, see the video below

gionee update.zip file not installed
i downloaded the update for gionee m2 8 gb from settings and it did'nt intall correctly and my phone is in bootloop showing system recovery menu sometimes i have tried factory data rest and everything from there but still no help ............please help

Lenovo K3 Note Bricked and SPFlash tool Not working.

My Lenovo K3 note bricked and now it boots up to spash logo and says dl image error or something. Downloaded the stock rom and tried the spflash tool but it doesnt seems to work. Please help.
e
Download the rom and tool from here- https://www.youtube.com/watch?v=mzN1q0h_YKM&ab_channel=Techjunkie

Hey,
I just uploaded BAD stuff from a BAD folder ...
preloader
ik
logo
secro
system
userdata
No life whatsoever. Tried as I realized after flash is done that I did a big fail to go into recovery (vol + & - & power) but nothing.
Even SPFlashtool is not seeing the phone nor adb.
Please help me unbricking this brand new phone.
/I wanted to make it full Hungarian language.../

I did the same. I tried to install another rom the tool and flash my phone died.
I did the firmware backup and now I am unable to restore the file Scatter.bin by Droid Tools.
I must have firmware.bat file but it was excluded.
someone could help me with this file. if there is a site to download and there is no way to reverse this? Please help me solve. Thank you

Do this
First Sorry for my Bad English
Try to do these steps:
Install all the drivers (including lephone and others)
Open Device Manager on Windows PC
Now plug in your SWITCHED OFF
And notice the hardaware changes
If you find a hardware named "MTK 675XXX Preloader" or something like that, then your mobile can be easily unbricked
if you notice a small triangle under it then the preloader drivers might not be installed
just click on it (be fast because it will only stay for a 10 seconds or less)
and click "Update Driver"
Now, Try to flash using SPF tools
If the above method dosent work then try to boot into bootloader. if not able, then YES, YOU HAVE HARD BRICKED YOUR PHONE

I accidentaly deleted the ROM on my Zuk Z2 pro

Hello there !
I'm not sure to be in the right section for looking for help, redirect me if needed.
I was trying to flash my device with TWRP recovery to get Mokee on my phone. I had a lot of trouble but finally everything was ok and I just had to press "flash". But after that, the process remained stuck at the "Patching system image unconditionally..." step. I did serval whipe, backup and install, with serval ROM (CyanogenMod and ResurrectionRemix as well) but I couldn't go farther. But once, I lost my backup and I had no ROM installed, and no way to install a custom one.
At this point, the phone can't boot, can't access flashboot mod or recovery mod. The display remain black and there is nothing I can do, like if it was dead. It is just detected by QFIL and MiFlash (port COM3).
The only thing I could do is try to install the ROM stock with QFIL. But QFIL won't work, it is stuck at "13: H\abc\prog_ufs_firehose_8996_ddr.elf" step for some times, then returns "Download fail:SaharaFail:QSaharaServer Failrocess Fail". So I was looking for an other way and I heard of a flash method through Miflash (as a new member, I can't post any link here). I followed the guide, step by step, but wether the flash ends correctly with no error and the phone still doesn't boot, or it says "Reached the end of the file.(0x80070026: Receiving hello packet)". In both case, it doesn't work.
So this is where I am now, an empty phone, with no ROM, just detected by the computer to flash. But some one told me a Qualcomm SOC can't be totally bricked, so I still have hope.
Could you please help me ? I've been working on it for so long, trying all sort of stuff, downloading every single driver from all over the web. I can't do any better.
Ask me some questions, ask for screenshots, I'm at your service !

I also tried this guide : w w w . droidviews .c o m /how-to-bo...astboot-download-bootloader-or-recovery-mode
But each adb reboot command returns "error : no device/emulator found"
Yet, it seems to be the very last thing I could do and it should work, do you think the issue is about drivers ? Or is that possible that even adb reboot commands fail ?

This is what I have in my devices manager : h t t p : / / hpics . li/da67572

I found out that when I press volume- and power for a long time, it activates the bootmod (which means I can flash with QFIL). But if I hold it two more seconds, the bootmod is desactivated, and that's why I was stuck until now.
I have now the ZUI ROM STOCK.
But still trying to get Mokee ^^

ZTE NUBIA Z9 MINI Bricked Plz HELP

Recently my phone has suddenly stopped all apps and system ui has crashed and a msg appeared that
"Encryption Failure plz reset ur phone" then i have reseted the phone and again the same msg has appeared
then i have gone to recovery it displays the msg like cant mount system,data,cache,etc
then i have also tried applying update from adb but it didnt worked then i have flashed twrp it shows internal storage as 0mb
then i have erased all system,boot,misc,data,cache from fastboot commands now i cant flash boot.img from fastboot it shows the msg "flash write failure" i also tried reformating data and system partitions from adb shell as i have access to twrp
my phone doesnt have usb debugging on and i have not rooted my phone can plz help :crying:

Please let me know if it get resolved.
PrabhakarKamath said:
Recently my phone has suddenly stopped all apps and system ui has crashed and a msg appeared that
"Encryption Failure plz reset ur phone" then i have reseted the phone and again the same msg has appeared
then i have gone to recovery it displays the msg like cant mount system,data,cache,etc
then i have also tried applying update from adb but it didnt worked then i have flashed twrp it shows internal storage as 0mb
then i have erased all system,boot,misc,data,cache from fastboot commands now i cant flash boot.img from fastboot it shows the msg "flash write failure" i also tried reformating data and system partitions from adb shell as i have access to twrp
my phone doesnt have usb debugging on and i have not rooted my phone can plz help :crying:
Click to expand...
Click to collapse
I have same kind of problem in my ZTE Z9 mini. I tried lots of thing but still shows E: Can't mount cache.....
Please share your exprience if you had a solution with your phone.
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
PrabhakarKamath said:
Recently my phone has suddenly stopped all apps and system ui has crashed and a msg appeared that
"Encryption Failure plz reset ur phone" then i have reseted the phone and again the same msg has appeared
then i have gone to recovery it displays the msg like cant mount system,data,cache,etc
then i have also tried applying update from adb but it didnt worked then i have flashed twrp it shows internal storage as 0mb
then i have erased all system,boot,misc,data,cache from fastboot commands now i cant flash boot.img from fastboot it shows the msg "flash write failure" i also tried reformating data and system partitions from adb shell as i have access to twrp
my phone doesnt have usb debugging on and i have not rooted my phone can plz help :crying:
Click to expand...
Click to collapse
Hi Prabhat, I have exact same issue with my Nubia ZTE Z9 min. I tried lots of this but still getting E:cant mount cache..... error again and again.
If you got solution of it. Please share with me..

rajesh9250 said:
I have same kind of problem in my ZTE Z9 mini. I tried lots of thing but still shows E: Can't mount cache.....
Please share your exprience if you had a solution with your phone.
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
Hi Prabhat, I have exact same issue with my Nubia ZTE Z9 min. I tried lots of this but still getting E:cant mount cache..... error again and again.
If you got solution of it. Please share with me..
Click to expand...
Click to collapse
Guys if you can send me a screenshot of the error i can explain the method to reflash boot image.

rajesh9250 said:
I have same kind of problem in my ZTE Z9 mini. I tried lots of thing but still shows E: Can't mount cache.....
Please share your exprience if you had a solution with your phone.
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
Hi Prabhat, I have exact same issue with my Nubia ZTE Z9 min. I tried lots of this but still getting E:cant mount cache..... error again and again.
If you got solution of it. Please share with me..
Click to expand...
Click to collapse
You can also try the below method.
Download ZTE Firmware From Below And Extract It
Switch Off Your Android Phone & Remove The Battery (If Battery is Removable)
Download SP Flash Tool and extract it on Your Computer
Run SP Flash Tool , Tap on The Download Tap.
Tap on The Scatter-Loading Button.
Select “Android_scatter.txt” from “Firmware” folder
Click the “Download” button
Connect Your Phone Through USB Cable
Read Full Flashing Process From Below
Copy the Zip to your Phone SD Card and Flash it through recovery Mode.

Please give firmware link it is not present

mm_rajesh said:
You can also try the below method.
Download ZTE Firmware From Below And Extract It
Switch Off Your Android Phone & Remove The Battery (If Battery is Removable)
Download SP Flash Tool and extract it on Your Computer
Run SP Flash Tool , Tap on The Download Tap.
Tap on The Scatter-Loading Button.
Select “Android_scatter.txt” from “Firmware” folder
Click the “Download” button
Connect Your Phone Through USB Cable
Read Full Flashing Process From Below
Copy the Zip to your Phone SD Card and Flash it through recovery Mode.
Click to expand...
Click to collapse
Please give link of firmware it is not present

PrabhakarKamath said:
Please give link of firmware it is not present
Click to expand...
Click to collapse
There is no formal firmware that we use You can flash any custom ROM or even the stock ROM.
Stock ROM : https://forum.xda-developers.com/android/help/help-nubia-z9-mini-indian-version-t3297449
Custom ROM : http://4pda.ru/forum/index.php?showtopic=702119&st=­4800
There are lot of options for custom ROM. Flash and send me screenshots if you get error.

mm_rajesh said:
There is no formal firmware that we use You can flash any custom ROM or even the stock ROM.
Stock ROM : https://forum.xda-developers.com/android/help/help-nubia-z9-mini-indian-version-t3297449
Custom ROM : http://4pda.ru/forum/index.php?showtopic=702119&st=­4800
There are lot of options for custom ROM. Flash and send me screenshots if you get error.
Click to expand...
Click to collapse
i cant find the scatter file plz help me:crying:

mm_rajesh said:
There is no formal firmware that we use You can flash any custom ROM or even the stock ROM.
Stock ROM : https://forum.xda-developers.com/android/help/help-nubia-z9-mini-indian-version-t3297449
Custom ROM : http://4pda.ru/forum/index.php?showtopic=702119&st=­4800
There are lot of options for custom ROM. Flash and send me screenshots if you get error.
Click to expand...
Click to collapse
the error msg is "no kernal(bad partition)"
" your phone is fused"

mi a2 showing E:Failed to clear BCB message : failed to find /misc partition

In pixel experience android 10 I was encrypting my phone and the screen goes black I thought it was doing its work but even after 12 hours phone didn't responded So I interrupted but now my phone just stuck on the logo. I tried to do factory data reset through recovery but it showing these errors https://drive.google.com/drive/folders/1T7kU7lyKH3Xfye7d8r_y1IKbRNj1aCJN?usp=sharing[/IMG] , (please see this drive link by copy and pasting )
I don't know what it is. Now I don't understand what to do.
I have all the drivers properly installed but even after that it is not showing the device id. I have unlocked bootloader. please help.!

d_kumar_vikas said:
In pixel experience android 10 I was encrypting my phone and the screen goes black I thought it was doing its work but even after 12 hours phone didn't responded So I interrupted but now my phone just stuck on the logo. I tried to do factory data reset through recovery but it showing these errors https://drive.google.com/drive/folders/1T7kU7lyKH3Xfye7d8r_y1IKbRNj1aCJN?usp=sharing[/IMG] , (please see this drive link by copy and pasting )
I don't know what it is. Now I don't understand what to do.
I have all the drivers properly installed but even after that it is not showing the device id. I have unlocked bootloader. please help.!
Click to expand...
Click to collapse
you were warned in telegram that not all custom rom supports encryption ...
use the backup of twrp you stored on computer before starting such a silly endeavor ...
*didn't make a backup to store on pc :silly:
anyway bro it is simple ...
•use your power and volume down button to enter fastboot mode
•connect to pc
•download and install miflash and fastboot stock rom
•install miflash and extract rom and select in miflash ...tick clean & flash all
•opem cmd window in fastboot
•run cmd :
fastboot oem edl
•when screen is black and you hear driver installing refresh in miflash
•see COM port recognized
•flash stock and start from 0
***ask in PE official channel if they support encryption ...encrypt your phone BEFORE you start using it ..so you don't lose data if it fails
:silly:why encrypt ? are you a criminal , activist,lawyer or politician ? if the answer is no just leave your phlne unencrypted ......
Sent from my wayne using XDA Labs