Related
Hey,
Just looking for some advice where I should go for a cheap solution on how to fix my phone. Basically, everything still works great! Apart from the big crack, the screen doesn't seem to have been damaged (eg. All the pixels look fine, touch still works, only glass/plastic panel is cracked)
I'm actually really impressed by how it took such a hard hit and the device works fine, the screen didn't even smash! Basically it nudged in between my car seat where you close the door, didn't realise it fell out my pocket and closed the door (you could imagine it would be a hard hit) and the phone lives.
If I just needed the glass replaced, can it be done DIY? Or should I not bother and give it to a service centre? I got it from 3 but I know they'll probably overcharge me for something like this..
Any suggestions welcome, thanks!
if the damage is only to the exterior screen then you may want to consider getting this:
http://www.mobilefun.co.uk/product/17042.htm
be carful! the screen from my firlfreidns diamond is broken too and I had ordered one of those touchscreens... but the screen which comes has no "window" for the frontcamera and after disassembling the phone I saw that it is NOT POSSIBLE to remove the touchscreenglas from the frame.
Replacement LCD & Digitiser
I recently replaced an lcd and digitiser on a HTC Touch Diamond. I bought the complete screen (lcd & digitiser) as one pre-assembled unit from a guy on Ebay (£34.99). Fits straight into the front of the unit frame. I don't think you can remove just the digitiser because it is stuck onto the LCD, and the LCD itself is very fragile. Disassembly is fairly straight forward if you've got the right tools.
Thanks for all your help guys! I've just been bogged down with work so havn't been able to get back here for awhile.
I've taken some time to look into the webiste and others, decided to just order it off ebay in the end anyways. However, taking note from the previous 2 posts, would I be wasting my time ordering just the digitiser itself? I would assume that's what HerrVorragend also meant by "that it is NOT POSSIBLE to remove the touchscreenglas from the frame."
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Double posted, sorry.
badtzmaru56 said:
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Click to expand...
Click to collapse
If you google for HTC Diamond Service Manual, that will help greatly with assembly and disassembly - there are also a couple of videos on Youtube. From my experience the most tricky part is re-connecting the two flex connectors when you re-install the main board. I use the back of a pair of tweezers to slide underneath the connector carefully. If you are nervous about doing it and happy to cover postage costs, I can replace the LCD for you - PM me for details and I'll see what i can do.
Andy
My touch screen stopped working on my phone, but the screen is still visible. I'm assuming it's the digitizer. I was wondering if anybody has done or tried replacing only the digitizer. Does this work, is it better just to replace both? Any suggestions? Thanks.
Save yourself the headache
Just replace the complete screen unit (lcd + digitizer).
The digitizer is held on the screen with some super strong adhesive that is nearly impossible to get off cleanly. Also, there are three (4?) thin ribbon tabs that have to be soldered to the board on the rear of the lcd. Unless you are really confident with a soldering iron, it is extremely hard to do.
I replaced my screen unit in about a half hour. Make sure you go to the wiki and find one of the excellent disassembly guides before you start.
Thanks
Thanks, that's exactly the information i needed to know. I found the fon logix video. Is it only a t6 tool i need, or do i also need a t5. I have seen conflicting info on this? Thanks again.
I got my scren unit from ebay, and it included a torx driver and a plastic case tool. I honestly can't remember what size came in the kit, because I used my own torx set. Im pretty sure its just the one size, though.
Good luck!
You might find this information interesting.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=116836
Disregard ............
i always replace only the touch screen. okay i've done it aprox 30 times. But i never broke one.
if you decide to replace only the touchscreen, there are 2 types. thus check which on you have, and i found out that sometimes reassamble, and cleaning can help.
good luck.
torx is 5 and 6, 6 for opening the back of the phone, 5 for the screen part removal of the body and opening it. you need an opening tool!!
adhesive
is there a terrible adhesive between the screen and digitizer, as the second poster mentioned? how difficult is it to deal with?
just cut away with snapoff knives. It wil break in more pieses. (the glas that is) just be carefull, and take your time
Thanks
Thanks for all of the info, i went ahead and purchased the screen with the digitizer and tools. One thing i have noticed though is the d-pad has stopped working also, i'm using a custom rom so i'm not sure if it's just that or it's something else. i will prob re-image after i replace screen.
Abel2007 said:
just cut away with snapoff knives. It wil break in more pieses. (the glas that is) just be carefull, and take your time
Click to expand...
Click to collapse
Well, guess I was a smarty pants and bought my stuff before consulting XDA...as such, I ONLY bought the touchscreen rather than the entire new unit. Cheaper, yes, but I had no idea about the adhesive until just now. My only question is, once I remove the old screen from the LCD with a razor blade, how do I affix the new one?
Anyone?
i would love to know this too because i have to also replace my digitizer!
drokkon said:
Well, guess I was a smarty pants and bought my stuff before consulting XDA...as such, I ONLY bought the touchscreen rather than the entire new unit. Cheaper, yes, but I had no idea about the adhesive until just now. My only question is, once I remove the old screen from the LCD with a razor blade, how do I affix the new one?
Anyone?
Click to expand...
Click to collapse
I used rtv gasket maker the transparent blue one worked well.
you can find it in automotive section. Actually any silcone will work.
also can use double sided tape but needs to be very thin
I've already changing my digitizer, but it doesn't seem to work. So I've change the whole part. cost me $20 more on ebay.
my advice is to change the whole package with the lcd too.
I've cracked the outer layer of glass on my optimus x2 which I assume is just the digitizer (I'm new to all this smartphone jazz but i've had alot of experience with building computers and such and i can follow instructions) and i'm guessing the cheapest way to repair this thing is to do it myself. I emailed LG asking about what they can do with it and they were asking for £20 just to look at the damn thing so i can't imagine actually doing any work on it would be cheap.
(can't post links but it was just some cheap generic one from amazon for £30)
I'm guessing something like this would do the job but I also need some special adhesive to get the LCD to stick to the digitizer am i right? I'm worried that it will not be as responsive or i'll do it wrong and i only recently dished out £250 for this so i'd like to try and do this right. I've watched a couple of videos on youtube which have helped a bit but none went right through the process so if anyone with any experience doing this could tell me about it i'd be very grateful.
its not that hard. everything just peels off when heated with a hair drier.
the digitzer should come with sticky strips which go around the outside of the lcd and stick to the out side of the digitizer.
Also try to get a digitizer with a frame already on it. otherwise youll have a little bit of a hard time trying to remove the glass from the frame, then gluing in the new one with adhesive.
http://www.youtube.com/watch?v=K77Xepb6yd8
Just follow this guide exactly, you should be fine man
Supupa said:
its not that hard. everything just peels off when heated with a hair drier.
the digitzer should come with sticky strips which go around the outside of the lcd and stick to the out side of the digitizer.
Also try to get a digitizer with a frame already on it. otherwise youll have a little bit of a hard time trying to remove the glass from the frame, then gluing in the new one with adhesive.
Just follow this guide exactly, you should be fine man
Click to expand...
Click to collapse
Thanks for the reply, that's a lot of help Could you recommend any retailer that sells these? I can't work out if any of the ones i'm looking at come with the sticky strips. Would I also not need any adhesive if it comes with the frame? I'm not sure I trust myself too much with doing that either.....
I recently replaced my digitizer. I ordered a digitizer already in housing off ebay, shipped from Hong Kong. I would strongly recommend buying it with housing, as it's often difficult to completely make sure that dust does not get between the digitizer and the screen when you're using adhesive tape.
When disassemblying the o2x, I found the adhesive sticking the LCD to the digitizer frame was too strong for the LCD to come off just like that (be careful, it's quite fragile). I heated the LCD a bit using a hair dryer, to make it come of easier. This has the added effect that enough adhesive may stick to the LCD, so you don't need to replace it when placing it in the new frame.
I only added a couple of adhesive strips to the top and bottom of the new frame before mouting the LCD. That was pretty stupid, cause the extra 0.1mm between the digitizer and the LCD means that when tilting the phone ~60 degrees to the sides, I can see the backlights at the sides of the screen. Surprisingly this doesn't seem to add any noticeable backlight bleeding though, so it's not a problem at all. However, I'd suggest to try and see if the LCD sticks to the frame with the old adhesive, before using adhesive strips. And if using adhesive strips, make sure you remove all the old adhesive from the LCD, and use adhesive strips all around the frame.
The only minor things to look out for are:
- Be very careful with the LCD! It takes very little flexing before getting dead stripes/areas.
- Careful with the plastic at the USB port - it's a bit difficult to get to fit, and it's quite thin, so I figure it will break easily.
- At the top of the phone, where the digitizer (or LCD, I don't remember) cable is mounted, there's a little grey rubber-thingy - it suddenly fell off my phone, and it took embarrassingly long to figure out where and how it fits
- The small backup battery (?) in the upper left corner of the phone is glued to the frame. I used a small flat-headed screw driver to release it from the frame. Don't try and remove it by yanking the flex cable.
But all in all, replacing the digitizer with a new one (already in a frame) was a quick and easy operation.
Edit: I bought this digitizer: ebay. co. uk/itm/T-Mobile-LG-P990-Optimus-2X-Replacement-Touch-Screen-Digitizer-Frame-ZVLT338-/160656180054?pt=UK_Replacement_Parts_Tools&hash=item2567dac356 and some cheap 2mm adhesive strips like ebay. co .uk/itm/3M-Sticker-tape-Adhesive-cellphone-touch-screen-LCD-2mm-HTC-Samsung-Sony-/200710386131?pt=UK_Mobiles_Accessories_RL&hash=item2ebb4571d3#ht_1099wt_1165
Why didn't I think of this before.. been cracks in my display for almost a half year now.
Local repair company said it takes two weeks to fix.. I had no plans to go two weeks without my phone
Just ordered one
p990 mother board
dear friend
sorry for my eanglish i write from italy.
i need your help but before i have to explane my problems:
i've a lg optimus x2 (p990) with water demage.....
i cleaned the mother board with success..now the phone turn on and fix the phone net and it can recognize the battery charge.
but unfortunately WI-FI,BLUETOOTH AND MIC(the people who call me can't hear me) DON'T WORK, THE GPS I DON'T KNOW BECAUSE I HOPE TO RESTORE THE WII-FI AND INSTAL GOOGLE MAPS.
i'm sure that wi-fi problems come from the mother board because i have an other same device so i made a test using the good one but the mic problems persisted
my question is ,do you know wich parts i have to check and clean again?
do you know where the wii-fi component are located in the mother board?
thanks for your attention
a friend
marco zavatta
Sorry for bringing up this old thread, but I have to ask, are all Optimus 2X digitizers the same? Don't some have different connectors or anything? Can I order any Optimus 2X digitizer for my P990? I was thinking of this digitizer, will it work?: http://www.amazon.co.uk/Digitizer-F...7BUA/ref=sr_1_1?ie=UTF8&qid=1364833172&sr=8-1
I had to replace mine recently, I read there are cheap ones where they only recognize 2 fingers instead of 5 like the genuine LG part. I ordered my digitizer from Ebay for around 18 british pound, I followed a few videos on Youtube with the disassembly, it's actually not that hard.
Keep in mind though that not all digitizers might come with glue attached or come with plastic tools, so keep a small bottle of glue and some plastic tools (credit card style plastic, knife) ready. One video recommends buying foam pads to glue around the digitizer, I didn't find that necessary, I just glued my new digitizer back onto the frame without problems. I accidentally made some glue residue onto the inside of mine, so make sure that you work very carefully
I have done this twice. It is not too hard and a lot cheaper. I follow this guide: http://www.youtube.com/watch?v=Po8hBaZt__o.
Do yourself a favour and buy a digitizer with bezel (which is a frame). The first I bought was ****ty Hong Kong digitizer, the second one good Polish(?): http://www.ebay.co.uk/sch/m.html?_nkw=p990&_sacat=0&_odkw=&_osacat=0&_armrs=1&_ssn=digitaloutlet.pl
The hardest part is not to get dust between digitizer and lcd screen - you could consider wearing gloves...
The second hardest part is not to bend bezel around usb inlet.
Good luck!
So there's no connector difference?
kaspar737 said:
So there's no connector difference?
Click to expand...
Click to collapse
The connector should fit any p990. If you are in doubt email the seller.
oneearleft said:
The connector should fit any p990. If you are in doubt email the seller.
Click to expand...
Click to collapse
Sorry for coming back to this rather old thread, but I have recently replaced the digitizer on my LG P990, bought on ebay shipped from Hongkong, following the video guide cited above. However the digitizer now works erratically with upper 1/4 not responding to touch, and sometimes the whole thing does not work, so I am unable to unlock the phone at all. The only thing that worried me during replacement was the thin layer of plastic film on the inner side, which teared off when removing protective layer (the film was extremely thin and fragile)-would this be the problem? Or the digitizer itself is of low quality?
Any suggestions appreciated.
Hi all,
I recently fell whilst holding my brand new N6 and cracked the screen pretty bad. The digitiser and LCD appear to work OK, so I'm taking the plunge and will try and replace the glass myself.
I've replaced the display module (glass, LCD and digitiser) for a number of family/friend's phones and feel comfortable about working with the small electronics. I've been reading and watching countless tutorials on the removal of the glass from the rest of the display assembly but and yet to find any information specifically about doing this on the N6. Specifically, I'm worried about how the speakers will affect the glass removal process.
If anyone has any N6 specific info, it would be most appreciated. I'm waiting for the replacement glass to arrive, I'll update this thread with how i get on!
Check out
https://www.ifixit.com/Device/Nexus_6
Sent from my Nexus 6 using Tapatalk
good luck, I have only managed to get anew screen on an iphone 4, failed miserably with my Nexus 7 2012, and I was clued up about what to do....
violentbydezign said:
Check out
https://www.ifixit.com/Device/Nexus_6
Click to expand...
Click to collapse
I've been through that. Will be useful to get me to the display module, but would have been nice if they showed what it looks like in more detail. I'll be sure to take lots of pictures when i do this and maybe a video.
mediaman123 said:
good luck, I have only managed to get anew screen on an iphone 4, failed miserably with my Nexus 7 2012, and I was clued up about what to do....
Click to expand...
Click to collapse
Did you try replacing just the glass or the whole display module? What went wrong? I'm also about to replace the display module on the N7 2012, the glass is cracked and half the digitiser doesn't work.
dixonl90 said:
Did you try replacing just the glass or the whole display module? What went wrong? I'm also about to replace the display module on the N7 2012, the glass is cracked and half the digitiser doesn't work.
Click to expand...
Click to collapse
with the iphone it was both the LCD and Digitizer I was replacing and they came together as one................same with the N7, both together, trying to install/remove these separately is suicide unless you have the right tools etc........
Have you bought the LCD/Digitizer toggether inside the silver bezel, I didn't, and I should have.........
basically there was a small cable on the back of the LCD/Digitizer that was present on the old damaged module, but not on the new one I had bought, I tried removing form the old and into the new, plugged in the normal power and screen cables, but then nothing, didn't work, my frustration also resulted in a small crack to the new screen.............
it possible but you need to have patience and the tools, which it sound like you do.......but its much easier already inside the silver bezel...........
the screen was glued into the bezel and removing this was murder, managed it, but had to pick out all the smashed glass bit by bit........
don't let me put you off though, you sound more competent than me........
mediaman123 said:
with the iphone it was both the LCD and Digitizer I was replacing and they came together as one................same with the N7, both together, trying to install/remove these separately is suicide unless you have the right tools etc........
Have you bought the LCD/Digitizer toggether inside the silver bezel, I didn't, and I should have.........
basically there was a small cable on the back of the LCD/Digitizer that was present on the old damaged module, but not on the new one I had bought, I tried removing form the old and into the new, plugged in the normal power and screen cables, but then nothing, didn't work, my frustration also resulted in a small crack to the new screen.............
it possible but you need to have patience and the tools, which it sound like you do.......but its much easier already inside the silver bezel...........
the screen was glued into the bezel and removing this was murder, managed it, but had to pick out all the smashed glass bit by bit........
don't let me put you off though, you sound more competent than me........
Click to expand...
Click to collapse
I haven't bought the replacement display module yet for the Nexus 7. Thanks for the info, think i'll try and get one with a bezel to be on the safe side.
its definitely the way to go as you will just be popping off the back cover, releasing the ribbon cables, removing some screws, peeling back some adhesive tape and that's you.........
and any dings to the bezel will dissapear too............
Removing the LCD ribbon cable on N6 is PITA I don't want to even think how to plug in the new one. The digitizer is easy since there is lock on it but the LCD just plugs in with lots of friction.
Any tips?
dixonl90 said:
Hi all,
I recently fell whilst holding my brand new N6 and cracked the screen pretty bad. The digitiser and LCD appear to work OK, so I'm taking the plunge and will try and replace the glass myself.
I've replaced the display module (glass, LCD and digitiser) for a number of family/friend's phones and feel comfortable about working with the small electronics. I've been reading and watching countless tutorials on the removal of the glass from the rest of the display assembly but and yet to find any information specifically about doing this on the N6. Specifically, I'm worried about how the speakers will affect the glass removal process.
If anyone has any N6 specific info, it would be most appreciated. I'm waiting for the replacement glass to arrive, I'll update this thread with how i get on!
Click to expand...
Click to collapse
hi, how you repair cracked screen on your n6?
can you replace glass screen only or screen complete(digitizer/lcd)?
pichigui said:
hi, how you repair cracked screen on your n6?
can you replace glass screen only or screen complete(digitizer/lcd)?
Click to expand...
Click to collapse
Unless you have the right equipment and lots of time buy the whole assembly.
You can watch videos on youtube how complicated is to separate the glass from LCD
£122 repair cost in UK.
Update
I'm experiencing the same problem. I've replaced the digitizers/screens on all versions of the iPhone and also on the Samsung Galaxy S4. I successfully replaced only the glass on some Samsung devices too. I'm wondering if I'll be able to do this with the Nexus 6 if I just buy the $10 replacement glass.
Thanks. Hope to hear your results soon.
EDIT: I've scoured YouTube in search of videos showing how to replace the GLASS ONLY, but I can only find videos showing how to replace the entire digitizer. So I'm desperate for any information on this. Haha.
cguarinus said:
I'm experiencing the same problem. I've replaced the digitizers/screens on all versions of the iPhone and also on the Samsung Galaxy S4. I successfully replaced only the glass on some Samsung devices too. I'm wondering if I'll be able to do this with the Nexus 6 if I just buy the $10 replacement glass.
Thanks. Hope to hear your results soon.
EDIT: I've scoured YouTube in search of videos showing how to replace the GLASS ONLY, but I can only find videos showing how to replace the entire digitizer. So I'm desperate for any information on this. Haha.
Click to expand...
Click to collapse
I was reading ifixit's how to guide. They state that the digitizer is fused to the glass. Possibly that's why everyone stops at this step.....
dixonl90 said:
Hi all,
I recently fell whilst holding my brand new N6 and cracked the screen pretty bad. The digitiser and LCD appear to work OK, so I'm taking the plunge and will try and replace the glass myself.
I've replaced the display module (glass, LCD and digitiser) for a number of family/friend's phones and feel comfortable about working with the small electronics. I've been reading and watching countless tutorials on the removal of the glass from the rest of the display assembly but and yet to find any information specifically about doing this on the N6. Specifically, I'm worried about how the speakers will affect the glass removal process.
If anyone has any N6 specific info, it would be most appreciated. I'm waiting for the replacement glass to arrive, I'll update this thread with how i get on!
Click to expand...
Click to collapse
What course of action did you end up taking with this problem?
robdevil said:
£122 repair cost in UK.
Click to expand...
Click to collapse
Can I ask where this is from? I've cracked the glass, screen works fine.
yes the glass repair is possible i am uploading photos of the process i did. i do work for a cell phone repair company and this has been a very common repair. Nexus 6 glass only repair with the use of OCA (optical clear adhesive) and bonded together with an ridge to ridge lamintator and and mini autoclave.
It turns out Motorola Official repair was £128 plus the postage to send them the phone in the first place.
I am unfortunately in the same boat. I sustained probably 15 scratches that my fingernail could get stuck on them all. My phone scraped along an artificial hardwood floor when a dog stepped on it facedown and slid. So I bought some cerium oxide in an attempt to sand down and buff away the scratches. I was not successful, and it looks like I added some more scratches. I'm going to put up with them until I get more, then replace the screen & digitizer probably while also adding a screen protector. I hate the feel of screen protectors though
tmotech88 said:
yes the glass repair is possible i am uploading photos of the process i did. i do work for a cell phone repair company and this has been a very common repair. Nexus 6 glass only repair with the use of OCA (optical clear adhesive) and bonded together with an ridge to ridge lamintator and and mini autoclave.
Click to expand...
Click to collapse
Impressive. What's your process for separating the cracked glass from the digitizer?
Although I'm sure the OP was asking for a way that doesn't require thousands of dollars worth of specialized equipment.
Has the OP given up on this project? I cracked my glass the other day however the digitizer still works just fine. I wanted to know if there was a do it yourself way to change the crystal without having to purchase a digitizer/crystal combo?
Thanks
hi...
i have a d802 device with broken screen glass...
touch & gestures work... screen works... it only has a few cracks on it...
can i just replace the front glass (cheaper solution?) or must i replace the whole digitizer and front panel...
any suggestions on trusted online shops thazt sell genuine LG d802 parts?
thanks in advance
Digitizer and glass is a single unit, and is readily available on ebay (for cheap) so there is that. The thing is that it is next to impossible to separate the glass from the display itself, and without professional tools the result of the reassembly will be quite awful. The best would be to exchange the display assembly as a whole. This is actually done quite easily. Lots of guides are available online, which just makes the process even easier.
Also for where to get the displays. You can actually contact LG or one of their service providers to purchase the display assembly. This way you are completely sure to get a top quality product. This is a tad more expensive though.
Ebay is also another place to get displays, the quality varies greatly here (have gotten anything ranging from completely original to barely functioning knock off. )
Etradesupply is apparently the best place to get displays at the moment, as their S+ grade is comparable to the ones you get from LG
http://www.etradesupply.com/lg-g2-d802-lcd-screen-and-digitizer-assembly-black.html
lusseMagnet said:
Digitizer and glass is a single unit, and is readily available on ebay (for cheap) so there is that. The thing is that it is next to impossible to separate the glass from the display itself, and without professional tools the result of the reassembly will be quite awful. The best would be to exchange the display assembly as a whole. This is actually done quite easily. Lots of guides are available online, which just makes the process even easier.
Click to expand...
Click to collapse
yes, i saw some youtube tutorials and removing glass from digitizer is a pain in the a$$, it can be done using hot air to melt the glue - but it's a time consuming process...
what interests me more is a whole screen section (glass+digitizer) and buying a proper genuine one for d802 (i think some people had issues with installing wrong panels from other variants to their d802 model)
thanks for your helpful answer :good:
60nine said:
yes, i saw some youtube tutorials and removing glass from digitizer is a pain in the a$$, it can be done using hot air to melt the glue - but it's a time consuming process...
what interests me more is a whole screen section (glass+digitizer) and buying a proper genuine one for d802 (i think some people had issues with installing wrong panels from other variants to their d802 model)
thanks for your helpful answer :good:
Click to expand...
Click to collapse
The thing is that the D800 and Veriozon models (as I recall) uses different digitizers. The connectors for these should not physically be able to connect to the D802 motherboard.
But to be able to cure the optically clear glue used for displays you will not only need an uv light but also lots of practice. Air bubbles get caught under the glass way too easily for it to be viable.
One more thing to note. the LCD itself is too easy to bend. Any flex will destroy it. Should also note that I too have watched the video where someone separates the G2 glass from the LCD and have tried to follow along multiple times. Every time resulting the same way. LCD breakage. Both times the polarizing filter got unstuck. So if you really want to go this route, my advice would be to find a professional to do the job.
Recently I had same problem: cracked digitizer. After my experience - first trying to replace only digitizer - NOT GOOD. I had to buy a whole set - digitizer and LCD. Just pay attention to your type of LG G2 - you can find all the types. But I am not sure if you can find a genuine replacement. Usually they are substitute, with no logo. But everything works fine. Pay attention also to where and how the connectors are placed and the most important thing - after you took out the old LCD give it a good heat to the back of the battery pack because is stuck with strong biadhesives and try not to pry too much the battery.
I just replaced mine G2 D802 (from 2013) Lcd, you need to replace the whole thing (screen+lcd)I think, you can buy the Lcd from the Internet. I bought the lcd about $50 and got the shop to replace it for $6. Now my G2 is like new.