Database Develop

Unable to find device in RSDLite

Hi guys, I'm using Motorola Milestone and my bootloader is 90.78. I opened RSDLite and plug in the phone in bootloader mode but my RSDLite is unable to detect my device.
I have already installed the motorola drivers. Anyone has any ideas?

bryant_16 said:
Hi guys, I'm using Motorola Milestone and my bootloader is 90.78. I opened RSDLite and plug in the phone in bootloader mode but my RSDLite is unable to detect my device.
I have already installed the motorola drivers. Anyone has any ideas?
Click to expand...
Click to collapse
Same issue here. I have bootloader 90.74. On my Windows 7 there's no way...
Drivers 4.1 and 4.6 tested...but no way...

Anyone has any ideas about this issue?

Weird problem :s Works fine on my Win 7 VM. You could maybe try to uninstall and reinstall the driver :/

Some people have issues with RSDLite on Windows 7 64 bits.
I used to have the same problem and finally I had to install it on my netbook which has W7 32 bits and it worked fine.
Did you managed to install it in an other computer ?

The latest RSDLite versions didn't worked for either but version 4.5.3 works good under Windows 7 for me!

I found a solution
Like the rest, I too had the same problem. Then I found out how to make it work by accident.
I am using RSDlite version 4.5.7 on Windows 7 (32-bit version).
This is what you must do.
Step 1:
Download Open Recovery Version 1.46 for Milestone from http://www.modmymobile.com/forums/downloads.php?do=file&id=28089
Step 2:
It is a rar file, so use any free software to extract out the contents of this OpenRecovery_v1_46_SHOLS.rar file to a new folder on your desktop.
After u have extracted it, look for a file called vulnerable_recovery.sbf. Copy out this vulnerable_recovery.sbf file to somewhere on your pc for example to the root of your C drive on your PC.
Step 3:
Download from this script to disable the recovery check for signed recovery menu (so that we can apply update.zip later) from
http://modmymobile.com/forums/attac...le-recovery-disable_recovery_check_by_ota.zip.
Unzip the file and there should be a file called Disable_recovery_check_by_OTA.sh
Step 4:
Copy the Disable_recovery_check_by_OTA.sh file to a sub folder called scripts that is within the OpenRecovery folder (which we have already extracted earlier) (eg. OpenRecovery\scripts).
Step 5:
Boot up the phone as per normal and then connect the phone to PC via USB cable
Step 6:
Change the USB Connection to Memory Card Accessl
Step 7:
Go to the desktop of your PC and open up the folder where the contents of the extracted OpenRecovery_v1_46_SHOLS.rar file is. You should then copy the update.zip to the root of your phone's SD card (eg. SDcard\update.zip).
Also copy the whole OpenRecovery folder also to the root level of your SD card (eg. SDcard\OpenRecovery)
Step 8:
Change the USB Connection to Portal & Tool. This is the trick that will allow RSDLite to detect your phone.
Step 9:
Launch RSDLite ver.4.5.7
Step 10:
It will take a few seconds for your phone to appear in the device list of RSDLite
Step 11:
Click on the "..." button and locate and open the vulnerable_recovery.sbf file which we have extracted earlier and had copied out to somewhere (eg. root of C drive).
Step 12:
Click on the "Start" button.
Step 13:
Immediately you would see something in the status progress of RSDlite. RSDlite will switch your phone to the Bootloader mode by itself.
Step 14: - Very Important Step
Pay attention to the status of the Bootloader on your phone. Halfway thru the progress of flashing the vulnerable_recovery.sbf, RSDlite will initiate a reboot of your phone.
When that happens, you must prevent the phone from rebooting into the normal Android mode and get it to boot into the Bootloader mode by quickly pressing & holding up on your D-pad in horizontal (landscape) position.
I would suggest that b4 RSDlite initiate the reboot, you should be prepared for it by sliding out the keyboard first and hold it in the horizontal (landscape) position and get ready to press up on the D-Pad.
by quickly turning your phone to the horizontal position (landscape) and press and hold up on the D-Pad of your phone. Hold the up key of your D-pad for about 3 to 4 seconds before release it and it should be now back in the bootloader mode.
Do not do anything yet. You will know when the flashing of the vulnerable_recovery.sbf is completed and successful when the result in RSDLite device list window says "PASS".
Step 15: - Also very important step
Once the flashing of the vulnerable_recovery.sbf is complete (after you see "PASS" in RSDlite), you may close RSDlite and then unplug the phone from the USB cable.
The phone is still in the bootloader mode. Now be prepared to boot into the recovery mode. This is very important. If you fail to boot into the recovery mode then you will have to repeat from Step 8
The technique that I use on my Motorola Milestone to boot into the recovery mode is by using the 3 button technique. I press the "x" key + power button + camera button together at the same time and hold it until the recovery mode icon appears which is a an exclamation mark within a triangle.
Step 16:
While in the recovery mode, slide the keyboard back in. Then press and hold the volume up button first and then press the camera button once and when you see the recovery menu you can quickly release the volume up button.
Step 17:
Slide the keyboard out. Use the D-pad to navigate. If you are holding the phone in vertical position, then to navigate up and down the recovery menu, just press up or down on the D-pad. To confirm your selection, press down on the middle of your D-Pad.
Using your D-Pad, scroll down to the part it says "apply sdcard:update.zip" and press the middle of your D-Pad to select it.
You should see something packages being downloaded to your phone which is part of the installation process of the Motorola Milestone Open Recovery Menu which is not the stock Recovery Menu.
Step 18:
Once you are in the Motorola Milestone Open Recovery Menu, scroll down to the option that says "Run Script". Select that option.
Step 19:
Then you should be able to see a list of scripts and one of them should be "Disable_recovery_check_by_OTA.sh". Select that script.
Step 20:
Once that "Disable_recovery_check_by_OTA.sh" has been applied, the phone will no longer check for signed recovery menus like this Motorola Milestone Open Recovery Menu when ever you go into the stock recovery menu to "apply sdcard:update.zip". This means you can install different types of "Open Recovery Menu" for different custom roms for Motorola Milestone.
Besides using this Motorola Milestone Open Recovery Menu, I have also tried the following 2 "Open Recovery Menu" on my Milestone:
1) Androidiani OpenRecovery 3.3 - http://forum.xda-developers.com/showthread.php?t=796679
2) G.O.T OpenRecovery (for installing G.O.T custom FROYO rom) - http://groupoften.wordpress.com/g-o-t-s-openrecovery/
Important Note:
Before you start to install custom roms please do a Nandroid back up of your phone in case something goes wrong during the installation of the custom rom, you can restore your phone back to stock rom.
The Nandroid back up and restore option is available within all 3 "Open Recovery Menu" mentioned above.

I have Windows 7 Ultimate 64-bit and I use Motorola USB Drivers 4.7.1 and RSD Lite 4.9. So it would be good to download these versions, which are the latest. If this wont work, do a factory reset on your Milestone.

download mode GT-I9001

after reading a lot about how to get in the download mode of the GT-I9001, its still not working as it should.
i used the programme odin multi downloader. i followed every step, which is at the bottom of the message.
so I did everything except when I put my phone in download mode the programme doesnt regognise the phone.
I dont know what I can do next. The only way when the programme regonises my phone if its in the ramdump mode.
Anybody can help me?
1. Download the WORKED2.rar package (mirror 1, mirror 2);
2. Download Odin Multi Downloader version 4.43;
3. After expanding the WORKED2.rar archive, press the OPS button and select the AriesVE.ops file from the uncompressed archive;
4. Mark the One Package option, press the One Package button on the bottom of the window and select the recovery-clockwork-6.0.1.0-ariesve.tar.md5 file;
5. Put your device in Download Mode by pressing Volume Down + Home + Power and plug it to your PC;
Make sure to have installed the correct drivers and the phone should be recognised by Odin (the top left rectangle becomes yellow) and press the Start button.

Fix bricked LGK8 (LG-K350n) (Europe)

Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link "file/1q394stxkmjn6xx/LG%20K350n%20K8.rar"
(Link was blocked just add mediafire stuff at the start, Sorry)
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.

I forgot password of my realme c3 device. what should I do now?

I tried to perform a factory reset from recovery mode. It is asking for the password there too.
When I tap 'forgot password' option it says 'a forgotten password can't be retrieved. Please contact our after-purchase service center for help'.
Is there any other way I can try before visiting there service center?

hi,
I am facing the same issue on realme c3 phone, is there any solution.

WTF!!
They are asking password even in recovery?? Well, good that one can't simply wipe your phone. Your good
Also, try to use memorable pass like birthdate or time dependent password app for better use.

Just unlock bootloader using ADB it will erase all data from your phone

Just flash stock firm, everything will be back to normal!

1) Download stock rom.
2)Extract it if it is in .ofp format using mct tool.
3) Download SP flash tool.
4) install drivers.
5) Download cdc driver install them.
6) Download brom exploit to bypass sequreboot. Or you wont be able use sp flash tool. You can find a ton of tutorial on YouTube for that.
7) load scatter file in sp flash tool.
8) open brom exploit.
9) download and install lib-usb.
8) power of you phone. Connect it to pc while holding vol + and - key.
9) You will see something on sequre boot bypass tool but its not over yet.
10) open lib usb filet while the phone is still connected. Click next and you will find option install filter. Now select mediatek usb port. And install filter on that.
11) disconnect the phone from pc. Power and power off again.
12) open bypass tool. hold vol + - key connect the phone.
13) go to sp flash tool. Just select userdata.
14) click download.
15) let it finish. And done.
Orrrr.
You can go to youtube search for Chanel named drwangz. You find a tutorial for hardbrick real me c3 phone. Follow that tutorial.
make sure you select download mode in sp flash tool

General X7 MAX and GT NEO FLASH/UBRICK INSTRUCTIONS

X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP
Please read all the information before proceeding.​
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose DOWNLOAD ONLY mode and check all the boxes. DONT CHOOSE DIFFERENT MODE!!!!
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable. Dont turn ON phone! Go Fastboot mode ( Hold VOL- and Power button)
17) Launching RECOVERY.bat in the "Unlock Bootloader"folder.
18) Format Data in Recovery
The first download is long, we are waiting from 5 to 10 minutes.
19) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU WANT FLASH WITH LOCK BOOTLOADER
Skip the STEPS for unlocking and blocking the bootloder.
Uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
HOW FLASH BACKUP?
- Unlock Bootloader
- Download this: -=Backup Flash=-
- Unpack and copy your backup ROM_ files in this folder
- Choose scatter from this folder in SP Flash Tools
- Uncheck SECCFG (ROM_20) and flash ( Dont forget use MTKbypass utility and check port)
- After Flashig again go EDL mode and flash only SECCFG (ROM_20)
- Maybe need Format Data in Recovery
- Done

Hi please can you provide files for Realme GT Neo Flash Edition (FE) as it has the latest firmware A.11. You provided files for only GT Neo and X7 Max. Find attached a screenshot showing the current GT Neo Flash Edition Firmware. Thank you

mahotlov said:
X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP​
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose Download Only mode and check all the boxes.
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
View attachment 5415903
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable and turn ON phone.
The first download is long, we are waiting from 5 to 10 minutes. Has it started?
I recommend doing a full data reset.
If the device does not start after a long wait and reboots itself or freezes (rarely, but it is possible), go to Recovery and make Format Data.
How do load in Recovery? Press VOL - and the ON buttons, the phone will switch to fastboot mode.
Launching RECOVERY.bat in the "Unlock Bootloader"folder.
17) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Click to expand...
Click to collapse
Question #1. I'm having currently an unlocked bootloader, and custom GSI installed (GT Neo). Do i need another instructions to do?

philipjan26 said:
Question #1. I'm having currently an unlocked bootloader, and custom GSI installed (GT Neo). Do i need another instructions to do?
Click to expand...
Click to collapse
No. dont lock, firstly flash Firmwire

Update:
Im able to change my GT Neo ROM to Indian Variant. Thank you so much sir!
Experience:
Instruction #13-#15 are quite tricky.
Issues Encountered:
- my windows pc cannot detect the mediatek com port
- proper timing of clicking DOWNLOAD on SP Flash Tool
How i manage to proceed on SP FT Download:
- first turn off phone (assuming below instructions are DONE -> How i fixed (to detect):)
- SP Flash Tool needed Configs are Done (just waiting for the Downlolad to be clicked)
- MTK Bypass (Administration) is waiting for device
- after SUCCESS MESSAGE on MTK Bypass, immediately click on Download (SP FT)
- once download is started, you can unhold VOL - & + wait to be finished
How i fixed (to detect):
- downloaded this mediatek vcom drivers -> https://www.thecustomdroid.com/mediatek-preloader-usb-vcom-drivers/
- there are some popup that appear (i forgot to remember), i just clicked yes
- then restart pc
- turn off device
- open LIBUSB Filter device (Goal is to detect "Mediatek xxxxx yyyyy zzzzz" usb device on the list)
- Hold VOL - & VOL + AND PLUG Type C Cable
- Check the LIBUSB Filter list and once you see any "MEDIATEK ZZZZZ XXX" click and install
- once success, you can go to -> How i manage to proceed on SP FT Download:
Hope that helps! Thank you .

[email protected] said:
Hi please can you provide files for Realme GT Neo Flash Edition (FE) as it has the latest firmware A.11. You provided files for only GT Neo and X7 Max. Find attached a screenshot showing the current GT Neo Flash Edition Firmware. Thank you
Click to expand...
Click to collapse
You can use firmware for Gt Neo or X7 Max (better) for FE ver. phone

mahotlov said:
X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP​
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose Download Only mode and check all the boxes.
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
View attachment 5415903
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable and turn ON phone.
The first download is long, we are waiting from 5 to 10 minutes. Has it started?
I recommend doing a full data reset.
If the device does not start after a long wait and reboots itself or freezes (rarely, but it is possible), go to Recovery and make Format Data.
How do load in Recovery? Press VOL - and the ON buttons, the phone will switch to fastboot mode.
Launching RECOVERY.bat in the "Unlock Bootloader"folder.
17) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Click to expand...
Click to collapse
Following your instruction properly.. but still getting this error while flashing.
@mahotlov please take a look into this.

MahiSingh083 said:
View attachment 5416559
Following your instruction properly.. but still getting this error while flashing.
@mahotlov please take a look into this.
Click to expand...
Click to collapse
You flash with lock bootloader.
Uncheck boxes from:
opporeserve2
cdt_engineering
md1mg

Guys, i have a doubt i am gonna buy this phone like in a week so when u buy the phone does it come with latest update (a.18) or it comes with a.15 y am asking is becoz in a.16,17,18 to many bugs so only anyone reply me

TeckySairam said:
Guys, i have a doubt i am gonna buy this phone like in a week so when u buy the phone does it come with latest update (a.18) or it comes with a.15 y am asking is becoz in a.16,17,18 to many bugs so only anyone reply me
Click to expand...
Click to collapse
It does not matter since it is easy to downgrade to a15 as per the OP instructions. I tried this multiple times.

vikas776 said:
It does not matter since it is easy to downgrade to a15 as per the OP instructions. I tried this multiple times.
Click to expand...
Click to collapse
KK Thnx For Quick Reply!!

It works great, @mahotlov thank you for sharing this, for your help, and guys this is legit, follow carefully the steps.

Thanks for this worked perfectly.
One thing to note you have to work fast when put into MTK mode as it will disconnect rather quickly.

Thank you. Totally worth the time. The x7 Max firmware feels much better than the GT Neo one.

mahotlov said:
X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP
Please read all the information before proceeding.​
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose Download Only mode and check all the boxes.
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
View attachment 5415903
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable. Dont turn ON phone! Go Fastboot mode ( Hold VOL- and Power button)
17) Launching RECOVERY.bat in the "Unlock Bootloader"folder.
18) Format Data in Recovery
The first download is long, we are waiting from 5 to 10 minutes.
19) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU WANT FLASH WITH LOCK BOOTLOADER
Skip the STEPS for unlocking and blocking the bootloder.
Uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Click to expand...
Click to collapse
as i have x7 max(INDIA) , can i install realme gt neo deep testing apk and unlock its bootloader and after flashing the firmware can i get backk to the locked bootloader state ?? through your.bat file or i"ll get stuck on image destroyed page ??

great!
Could you guide how to go back to gt neo firmware from X7 Max firmware??
And anyway to remove the google dialer? too annoying

abidrockzx said:
as i have x7 max(INDIA) , can i install realme gt neo deep testing apk and unlock its bootloader and after flashing the firmware can i get backk to the locked bootloader state ?? through your.bat file or i"ll get stuck on image destroyed page ??
Click to expand...
Click to collapse
You can use Deep apk for X7 Max or GT Neo. No problem
Shou1814 said:
great!
Could you guide how to go back to gt neo firmware from X7 Max firmware??
And anyway to remove the google dialer? too annoying
Click to expand...
Click to collapse
1. Yes. Everything is the same, just use the firmware for Gt neo( A27)
2. Remove without root- No.
You can use another dialer

mahotlov said:
You can use Deep apk for X7 Max or GT Neo. No problem
1. Yes. Everything is the same, just use the firmware for Gt neo( A27)
2. Remove without root- No.
You can use another dialer
Click to expand...
Click to collapse
i do the same to come back into gt neo but it appear that
Please help me
Thanks

Shou1814 said:
View attachment 5437159
i do the same to come back into gt neo but it appear that
Please help me
Thanks
Click to expand...
Click to collapse
I need full screenshot FlashTools and Mtkauthbyoass tool

mahotlov said:
I need full screenshot FlashTools and Mtkauthbyoass tool
Click to expand...
Click to collapse
i uncheck 3 option (locked bootloader), UART : 921600 and already check com port
still not run