i have installed windows power tools 2.8.3 on my pc
after installing its showing error
shown in picture plz help me
Related
Hi,
I tried to install Ubuntu UNR and I guess that has done some problem with MBR and my Shift-HDD.
I tried to do a FN+3, but it shows a message as "Invalid Hidden partition's boot sector data. Please restart and try F3 again. (69304410) (128)"
I tried to fo FN+10, and new copy of Windows 7. In the drive format/selection screen... it shows a message "ensure that the disk's controller is enabled in the computer's bios".
I tried to load default from BIOS - still same problem.
Kindly help.
I tried the search - but it was not helpful at an urgent search. If there is any link / advice... pleasee.......
The panic button is off...
I tried to boot and install Windows 7 again. I went into the repair mode. I saw the COMMAND PROMPT there.
I tried DISKPART and did a format of the HDD disk as in http://forum.xda-developers.com/showthread.php?t=474985
I restarted... and it is allowing me to install Windows 7 now. It is in progress in my SHIFT.
Hope this would be resolved
Thanks Thanks Thankkkssssssssssss
I have been trying for don't know how long but am just unable to flash the new bootloader. I have tried the AIO tool kit but with the latest drivers installed, usb debugging enabled but it keeps saying no connection found. I have also tried nvflash method but still not able to work my way around it. currently i am on pa rom but really want to get the ICS rom. I really need some help....
Thank you in advance
Yeah I had the same problem fe(w days ago . i have bricked my device totally then i will suggest you flash it through NV flash mathod and yeah ,make sure you have all drivers (device ) the most imp driver is 'APX DRIVER " Download it and install it ..on your system or laptop , remove battery of your device .. press + and - together and plug in usb . a popup and sound will be appear on our computer . thats it now you can flash your device through NV flash ..Happy flashing .. HIT THANKS IF I M HELPFUL and for more queries message me here :laugh:[/B][/B][/I]
APX drivers are included in AIO tool
maddyrokieasta said:
Yeah I had the same problem fe(w days ago . i have bricked my device totally then i will suggest you flash it through NV flash mathod and yeah ,make sure you have all drivers (device ) the most imp driver is 'APX DRIVER " Download it and install it ..on your system or laptop , remove battery of your device .. press + and - together and plug in usb . a popup and sound will be appear on our computer . thats it now you can flash your device through NV flash ..Happy flashing .. HIT THANKS IF I M HELPFUL and for more queries message me here :laugh:[/B][/B][/I]
Click to expand...
Click to collapse
agree (see below)
I - Install APX (NVFlash Recovery) Drivers if not already installed. It starts a device driver wizard to help you install the drivers needed for NVFlash. It detects your system OS and gives on-screen instructions if running Windows 8. FYI the drivers are located under ToolKitFiles\nvflash\driver folder.
Click to expand...
Click to collapse
- via http://forum.xda-developers.com/showpost.php?p=34809475&postcount=1
Prepare Phone
-Power down phone
-Remove battery
-Hold VOL_DWN+VOL_UP & plug in USB connection from computer (note, your phone will not visibly respond but it will boot to APX mode quickly)
-Open Device Manager in Windows and you should see "APX Device" listed with an error, or not if you have used NVFlash before
-Right click on the APX device
-Select 'Update driver software'
-Select 'Browse my computer...'
-Select 'Let me pick...'
-Select 'Have disk'
-Browse to directory you extracted the *driver* software to above (It's included in Stefan's zip)
-Select 'NVIDIA USB Boot-recovery driver for mobile devices'
-Accept any warnings, including the big red alert (you may need to disable UAC)
-Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'
If not, uninstall the driver, reboot, rinse and repeat
Install the rom:
- Go to the folder where you unpacked Stefans rom
- Run Windows installer and follow instructions on screen, should be peace of cake for everyone!
- DONE
I think you should try either updating your drivers for the phone and if that doesn't work, try an older version then.
On russian forum's 4pda Mirial flashed his Dexp w5 with help qfil on android.
Don't working 2g/3g service.
Dexp firmware with windows and android firmware
instruction for installation android on windows phone:
1 a)You should download android firmware and unzip on c:\firmware.
b) installing QPST_2.7.422.
c) should mode cabel and normal usb cabels.
d) installed qcom drivers without driver signing
shift and reset and f7
2 Run C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe
Select Programmer Browse choose prog_emmc_firehose_8x10.mbn and Load XML choose rawprogram_unsparse and open patch0 .
3 Removed micro sd and sim card. and connection phone to pc with mode cabel micro usb, after connecton to pc with normal usb cabel. You should see new device QDloader 9008 in device Manager.
4 In qfil press download.
5. finish and on phone.
6. Restore your imei with WriteDualIMEI(W+G_eMMC), but it don't working normal(
I can flashed this phone on Windows or android forever alone now?
All other functions of the phone works fine, besides modem.
Anyway to do this on Lumia devices like Lumia 625?
Rivo17 said:
Anyway to do this on Lumia devices like Lumia 625?
Click to expand...
Click to collapse
unsophisticated
I would like a Custom Rom for Lumia Nokia and Microssoft Lumia
and respect to this is a great work.....
power on modem(2g) on dexp w5 on android:
1. restored imei with WriteDualIMEI(W+G_eMMC)
2. Restored modem with qfil on picture.
3 power off phone and closed windows, and remove usb cabel and reboot phone and restored your imei with WriteDualIMEI(W+G_eMMC)
Hello guys I've lost windows 10 after flasshing the rom only erasing system,there is any form to recover it without installing it other time ?
Thanks
Is easy to recover - and windows booloader dissappear only if you are installing from iso .
I'm working to fix it .
You can make a bootable USB stick using Rufus and selecting GPT..., boot from this USB (overide by BIOS) and when installation starts, press NEXT and then Repair this Computer. Go to TRoubleshooting and Advanced Settings and go to command prompt and run these commands:
bootrec /rebuildbcd
bootrec /fixmbr
After that, go back and click on the "Startup repair" and windows will start without reinstalling.
The steps were described as good as I remember them...because I did it some weeks ago
If your windows icon on boot menu has disappeared you can also recover it by running bcdboot c:\windows from your installation ISO booted up at command prompt. (if you had installed windows fresh from ISO).
Hi!
In devicemanager on two different win 10-machines I cant install the drivers for my XZ3. Any ideas?
/Dave
yes.. disable driver signature in windows options .press and hold shift while restarting your computer to enter advance options