[Q] alternate way to upgrade Firmware - One (M7) Q&A, Help & Troubleshooting

hey there guys.is there any other way around on upgrading Firmware version without using adb or connecting to a pc through usb? cause my M7 has an issue where it cannot be detected anymore (or so i know/havent found a clue on how to yet). Meaning, whenever i tried to connect it to a usb through a pc or laptop.it switches automatically to “usb phone host mode”,disabling the charging and stuff, i have to boot to safe mode just to make my phone charging enable again. ,so using ADB for me is kinda like not an option..so any tips,, thanks in advance

Related

[Q] Kies on PC does not work via USB?

Hi,
I can't connect my Note to Kies using USB.
Tried installing the drivers again, Different ports. It works via Wifi but not USB?
Also tried switching from MTP to USB storage mode and back but it's not working?
Anyone got any idea's
Oh I've tried different cables as well
Thanks
Hi,
Try to manually update your USB drivers (in the Windows Hardware Divice Manager)
When you open it you'll either see a device with a question mark or find the Samsung under USB devices.
Hope this helps,
Ton
Try a reboot of pc after doing connection troubleshooting through Kies, als disconnect and reconnect phone to pc and pass lockscreen on phone
Which rom are you on?
Sent from my GT-N7000 using Tapatalk 2

[Q] Not able to connect to PC using USB cable

Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
musicking said:
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
Click to expand...
Click to collapse
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
xonar_ said:
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
Click to expand...
Click to collapse
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
musicking said:
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
Click to expand...
Click to collapse
You can root your phone from there. If you have SW Update. I recommend taking it into the shop if you are still under warranty, If you don't have warranty then you can go ahead and root. Just install a patched bin and fls with Smart Flash Tool. It's one of the stickies (How to unbrick, I think)
hi
new to Android nation
I have the same issue when connecting to USB...
And I managed to flash with custom firmware (latest ZEUS version) and I rooted but the issue with USB connection is still there...
Anyway, I wiil try connecting it to Linux to check if that would work with USB connecting
UPDATE:
OK after some digging, I managed to (at least temporally) solve the issue... After fresh installing official 2.3.4 firmware I booted to recovery and from there formatted the system folder and then installed Zeus v7 firmware... anyway, USB connection and charging indicator work fine at first booting to system... As soon as I reboot the OS USB connection (and charging) get unstable, and after third reboot it completely goes away and the device does not recognize anything: if I connect USB cable it does not show any sing (charging indicator does not show battery charging, nor the device offers me to connect in mass storage, windows recognizes only modem but not the USB storage) and when I connect charger, battery indicator does not flash as charging... Battery monitor tool shows that "battery is discharging" even though the battery capacity seems to increase (according to growing percentage of battery capacity)... Is there a some kind of USB server... I am a total noob to Androiid OS (used to be Symibian from its beggining )so I hope you won`t mind if I used wrong terms in my explanation/comment...
I hope my explanation is not confusing
Cheers
UPDATE 2:
After installing Zeus v7.01 update, battery charging recognition got fixed using both USB cable and wall charger...
Anyway, USB recognition by PC problem still exists... But when in recovery mode I can successfully mount SD card to PC in Mass storage mode...
Will keep you updated... :victory:

[Q] I9000 Screen Shattered - Need Data Recovered

Hi everyone. I have searched the forums with no luck. I have a I9000 that has a shattered screen and as a result there is no image on the screen nor will touch work at all....I know, big surprise right? My goal is to get the data off of the phone. The phone is booting as I can hear the sounds and responds to Doanload/Recovery Mode commands etc. Before I would plug it into PC via USB and I would have to select one of three options on how the USB should behave. One of those options would enable Kies to access the phone. Because the screen is damaged, how can I force the phone to connect with Kies, or the computer for that matter?
All help is greatly appreciated.
Chris
hi, it will depend on what the usb is set to, if you switch the phone on and connect to the PC you should be able to use it as an external disk. If not start Kies then connect and it should connect, then you can recover your files
slow--welder59 said:
hi, it will depend on what the usb is set to, if you switch the phone on and connect to the PC you should be able to use it as an external disk. If not start Kies then connect and it should connect, then you can recover your files
Click to expand...
Click to collapse
Hi thanks for the reply. Kies actually doesn't recognize the phone and suggests that I turn on Developer Mode (if I remember correctly).
I read of a way to recover the data by activating the Recovery Mode and plugging in to USB. The issue there is I would almost need screenshots of the menus to try and navigate through and mount the device since the screen is unusable.
thejacl said:
Hi thanks for the reply. Kies actually doesn't recognize the phone and suggests that I turn on Developer Mode (if I remember correctly).
I read of a way to recover the data by activating the Recovery Mode and plugging in to USB. The issue there is I would almost need screenshots of the menus to try and navigate through and mount the device since the screen is unusable.
Click to expand...
Click to collapse
Strange experience, you can also try some of these options:
(i) Can use the TV out cable so that the screen is displayed on an external display [Use the 3.5mm TV out cable, even Nokia TV out cable works]
(ii) For using recovery, you should know the cwm/kernal that was installed, as the menu options vary? if not, what last ROM version you had installed, this may also help you get the exact recovery menu options.
gopalasubramanium said:
Strange experience, you can also try some of these options:
(i) Can use the TV out cable so that the screen is displayed on an external display [Use the 3.5mm TV out cable, even Nokia TV out cable works]
(ii) For using recovery, you should know the cwm/kernal that was installed, as the menu options vary? if not, what last ROM version you had installed, this may also help you get the exact recovery menu options.
Click to expand...
Click to collapse
I will try that with a 3.5mm to RCA that I have from a digital camera and see if that works. I have never rooted the phone so it's stock and whatever the latest Android version for that phone is. I THINK its 2.3.1 but not sure.

Need Help Having Serious Issue Htc one charging but not connecting to PC

HI I know with the title of my thread its a nooby ques but my situation is different,
Since few days my phone was charging but not connecting to pc
as I know its a port issue because tried it on 3 pc's
Before I thought it's and rom issue I flash a different rom and got bootloop
Now I cant connect to pc no rom in sd
How do I flash it? I can go to twrp but I cant transfer from adb because port isnot working
I have a ques that really my por is damaged? Its only the isse?
because I cant get net port at my place and the shop man told me it could b an issue of motherboard too?
Can someone plz help me I am afraid and I cant afford motherboard for now..
:crying::crying::crying:
As I said I can chrge it so is their a way to temporary get rid of bootloop?
Thank You
Plzhelp
Are you using the original USB cable? There are some usb cable that will only provide power and no data connection. So make sure you have a data cable first. Then check you have the latest HTC drivers installed on your computer, make sure you don't have HTC Sync installed, that you are using a USB 2.0 port directly at the back of your PC (no external hub). What is your TWRP version, your Windows version and your Bootloader version?
Yes I know I have tried this all,
Have tried all recovery is twrp 2.8.7.0
Nd usb is original I use the same for my Xperia z2 for flashing...
Drivers are installed with signature enforcement disables on 8.1 windows
But all was working fine suddenly I got this issue..
What could be done
What is your hboot version
Can you get fastboot connectivity when in bootloader?
Can you get adb connectivity when in custom recovery or when booted in the ROM with USB debugging turned on?
Also worth mentioning that you won't get connectivity if your phone is on the lock screen, you must unlock the screen at least once when connected to the computer.
Otherwise if its the usb port, it can easily be replaced, you only need to remove the cover you then have access to the small usb/front mic board and can replace it without further dismantling. The usb board is pretty cheap, you can find it on amazon, ebay and probably any other website of that kind.
http://www.cafr.ebay.ca/itm/Chargin...682235?hash=item2c8fa787fb:g:URIAAOSwY45USvAs
https://www.youtube.com/watch?v=jaYzQHSGv54

Cant connect usb

using ....XT1068
Hey guys im a newbie but pls help me
I am unable to connect any usb device and also not able to connect to pc
When i connect my device to my pc it does not detects my phone (tried on different pcs as well) and also the usb otg devices are also not working
I tried downgrading to kitkat but still no help....and even contacted customer support but they didnt helped
( my mobile is getting detected in AP fastboot mode without any problem....i flashed kitkat using it..) PLs help
Do you have Motorola Device Manager Installed?
If not then Download Here: Click Here
Yes it is installed properly
Ok.
First check this : First open Settings then navigate to Storage and touch the upper-right corner for the USB computer connection options. Make sure Media device (MTP) is selected.
If this doesn't work then well you need to update the driver for your phone which your computer is using. Go to device mangaer on your pc and click on your phone name and update all drivers(left click to see options).
Still not working
It worked for half hour and then gone again

Categories

Resources