For the most part, I haven't had any issues with my phone after lollipop. I'm liking the new features and the new pull down quick access buttons. For some reason though, when I boot into recovery mode, I can't seem to get the menu to pop up. I've tried every combination I can think off with the power button and volume buttons but nothing seems to work. Any ideas?
I've recently had to wipe the cache on my Turbo and the recovery mode does seem to have changed. With the phone powered off, hold the power button and volume down button until you get to the bootloader. Use the volume keys to navigate the menu and press the power button to select. Select recovery and you should see the Android icon laying down. Hold the power button FIRST for about two seconds and then tap the volume up button.
Yes, if you're wiping the cache it will take a long time. Do not freak out! :good: The ETA should be about 20+ minutes.
I've done it before on kitkat and know that it takes forever. The first time I did it though I was flipping out cause I thought it was deleting everything haha.
I did finally get it to come up using that method, and your right it has changed. You have to be really accurate when holding the power button and using the vol up arrow because I was trying that before and never could get it to come up.
Anyway thanks for the help.
After lolipop update it is reversed. Hold power button and tap on up volume... For sure
Sent from my XT1254 using Tapatalk
Related
So.... Been playing with this for the last two days trying to root this phone.
I've rooted a few other phones, so I do have experience with the overall process, but I am unable to even boot this phone into Recovery. I have tried booting into recovery by holding down both volume buttons + power and from adb terminal "adb reboot recovery."
Neither method works. The phone will boot (or reboot from adb) and brings up the "at&t World Phone" screen and then nothing else appears. The first time I tried this it actually wouldn't boot up even after pulling the battery and trying to start normally, it still sat at the same screen. I let it sit all day today at the screen until the battery died. I was finally able to get it to boot up earlier.
If anyone can help, that'd be greatly appreciated. Let me know what info I need to add.
I usually just press and hold both volume buttons and power then release just the power button and keeping the volume buttons still pushed on the 2nd time the white at&t screen pops up... Works for me every time.
Sent from my SAMSUNG-SGH-I897 using XDA App
hold volume up+down and power key btw this is wrong section to post supposed to be in general
Oh sorry, didn't realize it was supposed to be posted in general.
I've tried the Volume Up/Down + Power and this does not work, as I stated originally.
I've also tried to do it from the adb shell, which also does not work.
Does anyone have any idea why I can't access recovery?
I"m having a similar issue. Holding volume up+down and power and releasing in any combination just boots the phone up. If I just hold volume up+down and power the phone alternates between the AT&T World Phone screen endless.
Yes u have to let go of the pwr button when the phone screen turns on
Sent from my SAMSUNG-SGH-I897 using XDA App
I've tried just about every combination of the Volume Up/Down + Power and no luck.
I've also tried the following ADB commands, with no luck, it just reboots the phone:
adb reboot recovery
adb reboot-boatloader
When I hold Volume Down + Power I get the a Yellow Triangle with a Android guy with a shove with the text "Downloading... Do not turn off Target!!!"
When I hold Volume Up + Power I get an Android guy with the following text: "POWER RESET or UNKNOWN UPLOAD MODE"
For kicks, I tried to to flash a rooted update.zip via the Volume Down + Power way with the Samsung update software, the same way I have done with the Samsung Moment. Wasn't sure if it'd work, but worth a try.
Any one else have any ideas or suggestions?
Phishie, do you have a final release version? Or anything special about the phone you have?
I just press the two volume buttons first (to make sure theyre pressed before you hit power), then press the power button, as soon as the screen turns on, I let go of everything and it works just fine, no need to have ridiculously complicated instructions.
The trick is to make sure both volume buttons are pressed BEFORE you hit power. Then release. Easy as pie
Also, if you guys are having too much trouble, just download the one click root/unroot. It will run, boot your phone into recovery, then all you have to do is scroll to install packages with volume key and hit power. Done.
Trust me, I am making sure I'm pretty the keys completely. I've literally tried it fifty times by now.
And I've also tried the One Click Root. This does not boot the phone into recovery either. It just sits at the AT&T World Phone screen forever and will actually get stuck here and will not boot up normal even by pulling the battery and powering it back up. It'll just get stuck at the for-mentioned screen. I have to connect it to adb and reboot it there to get it out of the loop it's stuck in.
that doesnt sound good. Maybe you need to try a factory reset? are you running stock rom and everything?
When I first got the phone I did a factory reset.
Yea, it's completely stock to my knowledge. But I have a different ROM than the final release version that everyone else has. This is a pre-production device.
same problem
I try all the combos as well, no luck, would the combos be different for 2e vs 3e recovery?
I try combo, it powers on, the same thing happens, the at-t comes up, goes for a second, then screen brightens, wait a bit and then the home row buttons light up, hangs there... doesnt matter which kernel or which rom I flash, same thing, adb and other stuff wont work as they need usb debugging enabled, which mine isn't.
Is there a way to mod the phone files and flash to enable usb debugging? Anyway to remap the buttons to 2 button vs 3 button?
Everyone post your methods for entering recovery please?
I have been trying to root my nexus one for a while.
However, I can't access bootloader screen.
I've tried holding the trackball and power button already.
Thank you in advance
Power off.
Hold volume down.
Press power while still holding volume down.
Release power after about 3 seconds.
Then release volume down.
You can toggle between boot, recovery, etc, with the menus.
On screen menus will tell you how to navigate.
Get familiar with it, before you try and root, etc.
Sent from my Nexus One using XDA App
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
reinbeau said:
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
Click to expand...
Click to collapse
It's always been a fickle thing for me. I just use ADB for recovery.
Turn on USB Debugging, open cmd prompt in Windows, navigate to where you have android\tools, then adb reboot recovery
I prefer it because it is reliable. I know I can do hardware keys to recovery but I always seem to require 3 or 4 tries before I can pull it off right.
Thank you - I'm definitely going to have to get more familiar with ADB. I have it set up, but I've never used it. Reliability is what I want, I really don't like the panic attacks in the middle of a ROM install!
Let GO
I think you missed an important step of the process of getting into recovery.
After you see the AT&T screen the 2nd time, LET GO of the power button.
Some phones are quirky about which button to let go of, and according to some posts, european builds do it with just one volume button and the power button. (I think)
Anyway, glad you got there, but be sure to let go of the power button next time.
Out of curiosity, does download mode work?
I can get into download mode with Odin no problem, but not with just the buttons, unless I'm doing that wrong, too.
I did try letting go of the power button, but all that did was boot the phone.
These things are so tricky, and the panic swells when it doesn't work and you're trying to flash a ROM for only the second time in your life!
I know the feeling... when your heart starts racing in your chest..
Been there.
reinbeau said:
I have read over and over again that you hold down both volume buttons, and the power button, and it'll boot into recovery - but it's never worked for me. Last night, by accident, I let go of the 'up' volume button, only the 'down' was down along with the power button and low and behold - recovery mode. Is this proper procedure maybe only for certain phones? I was so frustrated, all that would happen with three buttons held down is the AT&T logo screen would flash on and off. I guess I'm just looking for affirmation here.
Click to expand...
Click to collapse
Affirmative!!!
Hello everyone,
I cant use the 3 button combo at all to get to recovery mode. I've done the "Down Vol., Home, and Power" before and it worked. However, i am not able to get to it after i flashed Bionix-v 1.2, and 1.3. I pretty sure its not because of the ROM, but i just can't figure it out WHAT! I've tried the "Vol. UP, Down, Power" as well, but still not luck. Please help!
Thanks,
Yahase
yahase said:
Hello everyone,
I cant use the 3 button combo at all to get to recovery mode. I've done the "Down Vol., Home, and Power" before and it worked. However, i am not able to get to it after i flashed Bionix-v 1.2, and 1.3. I pretty sure its not because of the ROM, but i just can't figure it out WHAT! I've tried the "Vol. UP, Down, Power" as well, but still not luck. Please help!
Thanks,
Yahase
Click to expand...
Click to collapse
Turn your phone off, and plug in the USB cable. That worked for me.
While your phone is switcher off, press and hold both the Up and Down buttons in the volume. And then plug in the USB.
Sent from my SAMSUNG-SGH-I897 using XDA App
I tried up down vol. With usb still didnt work. Btw im using vibrant.
Sent from my SGH-T959 using Tapatalk
Just got my new N6, was setting it up, got the system update to 5.1 which I downloaded. Until here, everything seemed fine, however, after installing, I got an error message and since then, all it's doing is "Android is starting..."
Where did I go wrong? Called Moto CS which was a joke! I'll call Expansys from where I got the phone. But there has to be an easier solution.
Anyone? Thanks in advance.
If its the first boot after updating, it might take some time. Else try to factory reset from the recovery.
Turn OFF Nexus > Press and hold Vol Up button + Power button. Use Vol Down button to select Recovery and Power button to choose it. When the Android with Red triangle appears, press and hold Power button and tap on Vol Up. Now choose Factory reset option.
Thank you, but could not turn it off. Trying to power + vol up didn't do anything, however, power + vol down gave the fastboot mode from where I chose recovery, but it said no command was found
I think that means you have no custom recovery. Taken from another site:
"Press and hold the Power key and the Volume up key for around three seconds and then let go of the Volume up key, but keep pressing Power.
You should see the Android system recovery options pop up at the top of the screen. Use the Volume keys to highlight the options and the Power key to select the one you want."
Try this from the recovery screen. I think there is a power off option or maybe a factory reset option.
I'll give it a try and post am update, thank you.
Yeah simply pressing and holding power down then Pressing volume up once while holding power will give you the option to factory data reset. During startup it'll take some time for the first boot, some report 10 mins, be patient.
Sent from my Nexus 6 using Tapatalk
Holding power and vol up doesn't do anything for me! Why is it doing that?!
It's power and vol down. it boots you into the bootloader and there you can choose functions with vol up and down, and select it with power.
I did the factory reset, but it's still stuck in that same cycle. Called Motorola who advised to ask the merchant for a replacement. I called Expansys (from where I bought it), and was informed that I have to send it in first, then they will determine what the fault is and then I'll get the replacement, seriously?!
I called my AMEX and asked them to handle it.
Hi my volume button down is broken and everytime it boots it's in safemode.
Whenever trying to access recovery it normally boots up when buttons are pressed.
Booting into download mode freezes it, I have to do a hard reboot by pressing all the buttons.
Volume/power button work fine when in use.
I've opened up my phone to disconnect my volume button it stills boots up in safemode.
I've tried 2 new roms still in safemode.
Hello brother,
Even you flash 2 new roms still booting up safe mode, bad seen
i feel your volume down button was keep pressed maybe,,,,,maybe (it should be b coz of dust or something else).
to be confirm is that your volume button broken or pressed follow the steps below
1. switch on your mobile release the power key and Press again the power key and wait till finish the boot, (if the device get restarted it means we can confirm your volume down button was pressed & hold)
2. press home button & power button check if the device is going to download mode ( if you stuck press power button u will get exit)
how ever try to clean the volume down button inside and pull slightly. after turn on your mobile.
if your damn sure volume button was broken not working at all, then lets think about it