Here i have copied this Updates from my Phone ...(yes i have it back )
So first you must be on STOCK B609 and update it with this one
Make a new Folder called "dload" on external SD-Card and paste it there
P7-L10_Europe_C00B621 Update
P7-L10_Europe_C00B621 MEGA
when you have finished this you have to flash this one and also paste it in the dload folder!
P7-L10C900B805
P7-L10C900B805 MEGA
Here you can download Fastboot Images (B805) for:
Boot, Recovery, System, CUST
MEGA
HAVE FUN
Araca said:
Here i have copied this Updates from my Phone ...(yes i have it back )
So first you must be on STOCK B609 and update it with this one
Make a new Folder called "HwOUC" on internal Space and paste it there
P7-L10_Europe_C00B621 Update
when you have finished this you have to flash this one and also paste it in the HwOUC folder!
P7-L10C900B805
HAVE FUN
Click to expand...
Click to collapse
Can I install it from 615 or it is absolutely required to be on 609?
sebek_d said:
Can I install it from 615 or it is absolutely required to be on 609?
Click to expand...
Click to collapse
I guess it is an incremental update - everything that is in B609 should also be in B615, so if you ask me, it's totally safe. In any case, if something goes wrong, you can still use a full update rom in dload and the three button flash method. (OR you can force downgrade to B609 AND flash this one.)
g4b3rm4n said:
I guess it is an incremental update - everything that is in B609 should also be in B615, so if you ask me, it's totally safe. In any case, if something goes wrong, you can still use a full update rom in dload and the three button flash method. (OR you can force downgrade to B609 AND flash this one.)
Click to expand...
Click to collapse
Thanks...
I've tried with above folder, with dload, uncompressed and zip inside. No luck with local update. Failes each time. Any suggestions how it should be installed?
You have to put the update.zip in "dload" folder at external SD; not in HwOUC folder!
ml_taz said:
You have to put the update.zip in "dload" folder at external SD; not in HwOUC folder!
Click to expand...
Click to collapse
I've tried that. I will downgrade to 609 and try again.
sebek_d said:
I've tried that. I will downgrade to 609 and try again.
Click to expand...
Click to collapse
To update to B805, do what the OP said. To downgrade to B609, use the dload folder method with the full B609 ROM (the official one, not the CWM flashable).
Has anyone tried it yet? Screenshots please.
I get the update too have someone try it??
Its good update thank you
Million dollar question: how do i downgrade from B615 to B609?
@Araca Any Screenshots would be appreciated ?? Currently Downloading Lollipop Update .....
I am getting these also OTA.
With the HwOUC folder
For me it was the original update process
andromodgod said:
@Araca Any Screenshots would be appreciated ?? Currently Downloading Lollipop Update .....
Click to expand...
Click to collapse
Here you go
Can you... root it?
http://www.teamandroid.com/2015/06/...-p8-on-stock-android-5-0-lollipop-firmware/2/
Edit: is it using the same kernel as B609 (3.0.8-00453-gb101afe on my phone)?
So how do I downgrade from B615 to B609
ff4ff said:
So how do I downgrade from B615 to B609
Click to expand...
Click to collapse
Update with B609 and all is ok
google services wo,'t work? any ideas please?
My_rom
Well, currently I'm using my-rom 3.3. how do i "downgrade" to stock b609? Does a CWM flashable 609 work over my-rom?
And also, any ideas of, in case something goes wrong, how to downgrade from beta emui3.1 to 3.0?
Related
I flashed B609 CWM Stock from XDA from B813 and it worked fine then reset to factory
Now on B609, I cannot flash B621 OTA, Stock or Incremental at all, just fails at 0%
I tried with stock recovery and cwm and twrp
I always get the "cannot execute the file from zip" usually because of the build.prop, even removing the checks from buildprop, it fails at 3dmodem folder
I checked the build.prop with Build.Prop viewer and all the inputs such as build, model etc is correct
There is no motion control tho, but keyboard and wifi works
I really dont like B609, very slow
I want to get to B815
Can anyone help me completely redo my phone????
PLEASE PLEASE PLEASE
Thanks in advance
danielproenca said:
I flashed B609 CWM Stock from XDA from B813 and it worked fine then reset to factory
Now on B609, I cannot flash B621 OTA, Stock or Incremental at all, just fails at 0%
I tried with stock recovery and cwm and twrp
I always get the "cannot execute the file from zip" usually because of the build.prop, even removing the checks from buildprop, it fails at 3dmodem folder
I checked the build.prop with Build.Prop viewer and all the inputs such as build, model etc is correct
There is no motion control tho, but keyboard and wifi works
I really dont like B609, very slow
I want to get to B815
Can anyone help me completely redo my phone????
PLEASE PLEASE PLEASE
Thanks in advance
Click to expand...
Click to collapse
did you try the 3 keys method?
Principleoflust said:
did you try the 3 keys method?
Click to expand...
Click to collapse
No? What is that??
Principleoflust said:
did you try the 3 keys method?
Click to expand...
Click to collapse
If you're talking about the power, + and - volume then yes I have tried that, each update of B621 never goes past 1% and it says it cannot execute the zip
danielproenca said:
If you're talking about the power, + and - volume then yes I have tried that, each update of B621 never goes past 1% and it says it cannot execute the zip
Click to expand...
Click to collapse
Well, of course it cannot execute a zip file - there should be an update.app in the dload folder.
So try with B609 stock recovery, with an extracted update.app, and everything should be fine. I'd also try a factory reset before flashing, just to be sure.
g4b3rm4n said:
Well, of course it cannot execute a zip file - there should be an update.app in the dload folder.
So try with B609 stock recovery, with an extracted update.app, and everything should be fine. I'd also try a factory reset before flashing, just to be sure.
Click to expand...
Click to collapse
The zip wont execute when its the incremental OTA
Update.zip in the DLOAD folder doesnt work either, even tried a factory reset
danielproenca said:
The zip wont execute when its the incremental OTA
Update.zip in the DLOAD folder doesnt work either, even tried a factory reset
Click to expand...
Click to collapse
Unzip the update.zip file - you just need the update.app inside.
g4b3rm4n said:
Unzip the update.zip file - you just need the update.app inside.
Click to expand...
Click to collapse
Yes of course, its simple, its not the first time I'm doing this
I dont know what the problem is but with just the UPDATE.APP in the DLOAD it still doesnt update
danielproenca said:
Yes of course, its simple, its not the first time I'm doing this
I dont know what the problem is but with just the UPDATE.APP in the DLOAD it still doesnt update
Click to expand...
Click to collapse
What is the recovery you are using? Try flashing it from here, then three button method (VOL + and - and POWER). You could also try to flash B609 and its CUST partition first, and THEN the 621 OTA.
BTW if I were you, I'd wait for the official Lollipop since this one is not stable. It eats more RAM out of the box, and openin applications freeze the whole system after a few months. I just reverted back to B609 because the phone couldn't even play music without waiting for 30 seconds for the Play Music to load, then pressing the button, then waiting, then start, then crash, then start over and pray.
Hello,what going to append if i update my rooted phone on B136 to B170 because i readed that if i update with OTA Update my phone can go in a bootloop. Thanks for the answer.
It might be possible. Do not update ota when you are rooted. Download the latest firmware from huawei-updates.ru for your specified model, take the zip into your sdcard in a folder named dload ( you can create it if you dont have it) and go to updater, local update and select it.
Thanks ! and like that I'm not gonna have any problem ?
And and I can directly go to B170 or not?
cristian95 said:
It might be possible. Do not update ota when you are rooted. Download the latest firmware from huawei-updates.ru for your specified model, take the zip into your sdcard in a folder named dload ( you can create it if you dont have it) and go to updater, local update and select it.
Click to expand...
Click to collapse
I made that you say but didn't worked ... thanks for the help .
Keep it in that folder and try to force update by powering down your phone and power it up pressing vol up+ down and power button
Thanks it worked !
No problem sir, here to help
Nooo! don't know why but my phone go to a bootloop.... tried everythink....
Hmm, try to plug in it an usb cable and flash an old firmware for it trough adb.
Can you give me some link to do that ? and thanks !
U need adb toolkit, a version of b170, search on huawei-updates.ru , prefferably the european version. Get huawei package extractor and extract from update.app found in the zip of b170, system.img, cust.img, boot.img,recovery.img. and flash them one by one in fastboot mode. If not, if u had a nandroid backup made with twrp u can restore. U can search google on a detailed guide to do that, as I may induce you in error, not a native explainer talent here
Or you can extract it and flash automatically all in one clic with a script(for all firmware )
dkonect said:
Or you can extract it and flash automatically all in one clic with a script(for all firmware )
Click to expand...
Click to collapse
I got to beta 6.0, installed twrp, root it, but it did not permanently, uninstall some system app (google+, maps, etc) after a few reboots superSU was asking for binaries; so I unroot it.
How can I get back to stock recovery? And if so, If I make a factory reset, would it boot correctly for a new setup (because of the erased apps earlier).
Thanx mates, regards
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
OK, i got it work!
00471 said:
OK, i got it work!
Click to expand...
Click to collapse
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Salman Al-Badgail said:
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Click to expand...
Click to collapse
of course, i wanted to do it but didnt have time, ill update OP with solution
00471 said:
of course, i wanted to do it but didnt have time, ill update OP with solution
Click to expand...
Click to collapse
Thanks :good:
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
Tried exactly as you say, STILL Software install failed.
Can you send me link which system you are trying to flash? Maybe you have just bad package
Odoslané z HUAWEI GRA-L09 pomocou Tapatalku
Can't get it to work
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
T1mb3 said:
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
Click to expand...
Click to collapse
Actually i do, i bricked my phone one after that later, and this helped: http://www.huawei-info.de/p8-mm-rollback flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
00471 said:
Actually i do, i bricked my phone one after that later, and this helped: xx flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
Click to expand...
Click to collapse
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
T1mb3 said:
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
Click to expand...
Click to collapse
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
00471 said:
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
Click to expand...
Click to collapse
There is no cust in the update.app
T1mb3 said:
There is no cust in the update.app
Click to expand...
Click to collapse
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
00471 said:
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
Click to expand...
Click to collapse
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
T1mb3 said:
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
Click to expand...
Click to collapse
No problem, let me know if you solve it
00471 said:
No problem, let me know if you solve it
Click to expand...
Click to collapse
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
T1mb3 said:
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
Click to expand...
Click to collapse
Glad it worked!
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Qqman55 said:
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Click to expand...
Click to collapse
If you are on 5.0.1 with root and twrp then you are good, or do you want try BETA? if yes then you need stock recovery flash before flashing beta
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
can you upload stock recovery of b313?
The build number is VNS-L31C900B321SP10-log and its 1.3g
Link here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1305/g223/v61176/f4/full/update.zip
Can't get it to install though, can anyone else confirm?
Thanks
Paul
No way!
So that means we will have nougat very soon!
Is there any changelog available?
How do you know this is a Nougat build?
Some info would be nice before anybody flashes anything.
it's nougat but... dont boot after force update from DC Phoenix v22
I dont know... im flashing stock B151
BadWolfYe said:
it's nougat but... dont boot after force update from DC Phoenix v22
I dont know... im flashing stock B151
Click to expand...
Click to collapse
Put it in dload and flash it.
Dont work... After check file... In "installing" give a error... At 6%
BadWolfYe said:
Dont work... After check file... In "installing" give a error... At 6%
Click to expand...
Click to collapse
Don't use DC pheonix. Use the OTA update from the phone.
Im using ota phone... (Enginner mode) and 3 buttons method... The Nougat file FAIL'S at 6%
Abd yes i put UPDATE.APP in DLOAD
Yes its the 7.0 versions... I extracted the buildprop from that update app (i dont install it on my phone !)
Where did you find the link plz?
BadWolfYe said:
Im using ota phone... (Enginner mode) and 3 buttons method... The Nougat file FAIL'S at 6%
Abd yes i put UPDATE.APP in DLOAD
Click to expand...
Click to collapse
Factory reset?
Or a wipe?
Are you sure it is for L31?
the file it's for C432 and C900 VNS-L31... yes it's correct... no tested factory reset... (and in this moment dislike the factory reset option)
¿anyone installed the nougat update.app succesfully?
BadWolfYe said:
the file it's for C432 and C900 VNS-L31... yes it's correct... no tested factory reset... (and in this moment dislike the factory reset option)
¿anyone installed the nougat update.app succesfully?
Click to expand...
Click to collapse
Update.app failed at 6℅ can't get past it. I have tried a few times already.
same problem..
Guys!
I think there's a way
We have to make the update.app into a flashable zip!
Johnny TDN said:
Guys!
I think there's a way
We have to make the update.app into a flashable zip!
Click to expand...
Click to collapse
No work... i flashed system.img and boot.img from NOUGAT and dont work... (dont boot)
BadWolfYe said:
No work... i flashed system.img and boot.img from NOUGAT and dont work... (dont boot)
Click to expand...
Click to collapse
The update.app has more files to be flashed.
yes... but in recovery it's impossible to flash anyone of other files... only system, boot, recovery and cust...
i flashed all files of update.app in DC Phoenix v22, and dont boot... (no boot OS, and no boot RECOVERY)
in fasboot/dc phoenix, no flash EFI.IMG... but yes fastboot.img and XLOADER.IMG, EFI dont flash... i dont know the reason
BadWolfYe said:
yes... but in recovery it's impossible to flash anyone of other files... only system, boot, recovery and cust...
i flashed all files of update.app in DC Phoenix v22, and dont boot... (no boot OS, and no boot RECOVERY)
in fasboot/dc phoenix, no flash EFI.IMG... but yes fastboot.img and XLOADER.IMG, EFI dont flash... i dont know the reason
Click to expand...
Click to collapse
Maybe it isn't finished.
Johnny TDN said:
Maybe it isn't finished.
Click to expand...
Click to collapse
it's possible or... in the firmware finder it's marked OTA... not FULL
example the leak from P9 it's marked FULL no OTA...
it's possible there a "full ROM and REAL" but... there a OTA for other version C900B156 for example... or other... i don't know...
for correct installation it's needed the FULL package... but in the update.app are ALL FILES for "full" ... it's extrange...
sight... im from spain in the morning im very happy read about the "leak" i downloader, probed all possibilities for FLASH but no result... and in this moment im sadly, no NOUGAT hahahahaha...
hi
Please help me rollback Android 6.0 to 5
st3205 said:
hi
Please help me rollback Android 6.0 to 5
Click to expand...
Click to collapse
Do you have a roll back package for you device??
hassanjavaid8181 said:
Do you have a roll back package for you device??
Click to expand...
Click to collapse
I got a roll back file but did not
st3205 said:
I got a roll back file but did not
Click to expand...
Click to collapse
Is it for you device according to you model and build number??
What procedure did you follow??
hassanjavaid8181 said:
Is it for you device according to you model and build number??
What procedure did you follow??
Click to expand...
Click to collapse
This is just a build number C636B501
link: http://iranmobile.org/Clicks/click.php?id=Che2_L11C10B062_Rollback_DL
SD Card/dload/UPDATE.APP
*#*#2846579#*#*
st3205 said:
This is just a build number C636B501
link: http://iranmobile.org/Clicks/click.php?id=Che2_L11C10B062_Rollback_DL
SD Card/dload/UPDATE.APP
*#*#2846579#*#*
Click to expand...
Click to collapse
Normally when you want to rollback..
Procedure is
Flash rollbackpkg
Then flash lollipop firmware..
st3205 said:
This is just a build number C636B501
link: http://iranmobile.org/Clicks/click.php?id=Che2_L11C10B062_Rollback_DL
SD Card/dload/UPDATE.APP
*#*#2846579#*#*
Click to expand...
Click to collapse
have you succeeded to perform rollback?
miststudent2011 said:
have you succeeded to perform rollback?
Click to expand...
Click to collapse
No, I could not get a rollback.
When I load the rollback file, I will dload the folder and use the three button method to go to twrp :|
st3205 said:
No, I could not get a rollback.
When I load the rollback file, I will dload the folder and use the three button method to go to twrp :|
Click to expand...
Click to collapse
Do you have twrp installed?
Is twrp working.
What is your twrp build number.
miststudent2011 said:
Do you have twrp installed?
Is twrp working.
What is your twrp build number.
Click to expand...
Click to collapse
I think it's pre-installed
3.1.0-0
st3205 said:
I think it's pre-installed
3.1.0-0
Click to expand...
Click to collapse
In order to use dload method you should be on stock recovery.
miststudent2011 said:
In order to use dload method you should be on stock recovery.
Click to expand...
Click to collapse
I did not understand please explain more
st3205 said:
I did not understand please explain more
Click to expand...
Click to collapse
Currently you have TWRP installed which is not stock recovery so dload method doesnt work.
Inorder to dload method work you need to have stock recovery.
Follow the procedure.
1. Take a nandroid back of the current system,boot, and other partitions, make sure the backup is not corrupt.
2.Now wipe all partitions through TWRP.
3.Now extract stock recovery.img from update.app of the version you like to downgrade using update extractor tool.
4.Now flash the the stock recovery.img using adb.
5.Now place the update.app in root dload folder of SD card and use there buttons to boot the system.
6.Wait the process to complete and you will have downgraded version.
Note the above method will work but proceed with caution.
miststudent2011 said:
Currently you have TWRP installed which is not stock recovery so dload method doesnt work.
Inorder to dload method work you need to have stock recovery.
Follow the procedure.
1. Take a nandroid back of the current system,boot, and other partitions, make sure the backup is not corrupt.
2.Now wipe all partitions through TWRP.
3.Now extract stock recovery.img from update.app of the version you like to downgrade using update extractor tool.
4.Now flash the the stock recovery.img using adb.
5.Now place the update.app in root dload folder of SD card and use there buttons to boot the system.
6.Wait the process to complete and you will have downgraded version.
Note the above method will work but proceed with caution.
Click to expand...
Click to collapse
Hi, I did not get the first option right
What is the second option wipe cashe-wipe reset factory,.. ?
If i did it
Option III extracted recovery.img file
I flashed through the adb and then placed the update.app file in the dload folder on the memory card and using the three button method, I did not accidentally happen, and the phone will remain in the logos.
2 questions asking:
1. Which version of twrp should I install?
2. Is the Android 6 CASTOMRAM available for my device