Related
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
OK, i got it work!
00471 said:
OK, i got it work!
Click to expand...
Click to collapse
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Salman Al-Badgail said:
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Click to expand...
Click to collapse
of course, i wanted to do it but didnt have time, ill update OP with solution
00471 said:
of course, i wanted to do it but didnt have time, ill update OP with solution
Click to expand...
Click to collapse
Thanks :good:
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
Tried exactly as you say, STILL Software install failed.
Can you send me link which system you are trying to flash? Maybe you have just bad package
Odoslané z HUAWEI GRA-L09 pomocou Tapatalku
Can't get it to work
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
T1mb3 said:
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
Click to expand...
Click to collapse
Actually i do, i bricked my phone one after that later, and this helped: http://www.huawei-info.de/p8-mm-rollback flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
00471 said:
Actually i do, i bricked my phone one after that later, and this helped: xx flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
Click to expand...
Click to collapse
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
T1mb3 said:
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
Click to expand...
Click to collapse
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
00471 said:
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
Click to expand...
Click to collapse
There is no cust in the update.app
T1mb3 said:
There is no cust in the update.app
Click to expand...
Click to collapse
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
00471 said:
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
Click to expand...
Click to collapse
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
T1mb3 said:
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
Click to expand...
Click to collapse
No problem, let me know if you solve it
00471 said:
No problem, let me know if you solve it
Click to expand...
Click to collapse
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
T1mb3 said:
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
Click to expand...
Click to collapse
Glad it worked!
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Qqman55 said:
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Click to expand...
Click to collapse
If you are on 5.0.1 with root and twrp then you are good, or do you want try BETA? if yes then you need stock recovery flash before flashing beta
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
can you upload stock recovery of b313?
**UPDATE RESOLVED**
For anyone who searches and has same problems.
I needed an sdcard to get the files onto the phone.
To recap - it was stuck in boot, TWRP would load and stated no OS installed.
1. In rooting guide as per Here download file linked in the guide and unzip.
2. From folder 3 of that zip file there is a folder called data containing stock.img - place this onto sdcard.
3. Then go to this thread and download the files as hosted on mega.nz - over 2 gig.
4. Extract that zip to the sd card so that on the card is a folder called 'dload'
5. To confirm, the dload folder should have update.app and 2 folders called dt and hw
6. Put sdcard into phone.
7 .Boot into TWRP
8. Goto install, select storage, select your sdcard then select stock.img, agree to install, ignore message about no os.
9.Once that has installed my phone just restarted, EMUI came up, read the dload folder automatically and ran.
Then once phone started it found a newer update and installed that.
Phone is now working, unrooted and bootloader is locked again.
All this was found on the XDA site, just across various posts.
Thanks again to all.
********ORIGINAL BELOW********
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
fabgav said:
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
Click to expand...
Click to collapse
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update
here's a list of update files: https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
and here you can find the oeminfo files, there's a google drive link under oemfiles, at least for the vns-l21, 22 and 31: https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
mjz2cool said:
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update[/url]
Click to expand...
Click to collapse
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
first of all, no, p9 is a different phone, but you posted on the p9 lite forum. i'd suggest posting this question on the p9 forum.
i don't know exactly how it works for the p9, but it shouldn't be much different.
for the rom zip: inside that zip there's an update.app file, that file should indeed be put in a new folder called dload, but it won't be installed through twrp.
on the p9 lite it works like this: you flash the oemfile through twrp, and after that push and hold both volume buttons and the powerbutton till the phone reboots and shows an update progress screen, then you can release the buttons. now the update file will be installed. but then again, i don't know the procedure for the p9 so be sure to post your question on the correct forum.
edit: i've taken a look on that link to the stock rom you tried installing, it's a zip file that contains the dload folder, just put that folder on the root of your sdcard. do make sure it's the correct version.
you will have to flash the stock recovery for your phone however, and if the p9 works the same way as the p9 lite you should find an oeminfo file and flash that with twrp.
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
fabgav said:
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
Click to expand...
Click to collapse
here's a link to the oeminfo for eva -l9: https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 i think that one should be flashed in twrp, and after that you can use the 3 button combo
no problem at all
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
Hello
Here it is p9 lite.
Section p9 is here. https://forum.xda-developers.com/p9
I think you are looking for this.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Yes the steps are.
Bootloader
Twrp
Flash Cxxxoeminfo
DLOAD Bxxx
SOLVED
First post updated with fix.
Thanks for all the help here on XDA
deleted by user
Any other place i can download the "dload" file beisides mega...please any help...
Yureka 2 :NO OS installed .Do you want to reboot ? Clicked reboot.Mobile hangs
Hi,
I tried to install Lineage OS 15.1 custom ROM using TWRP recovery in my Yureka 2 YU5551. I wiped out the data before flashing. During flashing I faced Error 7 and unable to install custom ROM.Twrp asked this- NO OS installed. Do you want to reboot? I Clicked reboot and my mobile not even booted properly. Still hangs. I tried to open recovery mode using the power button and volume up and volume down button. I am unable to go to recovery mode. When I connect my mobile to my laptop its not recognizing as the phone is not restarting.
Can someone plz help me how to install an OS and start my phone. Thanks in advance.
Thanks
Thinagharraj
Hello sir, please notice me. Can I possibly get another link to get the stock.img because the link that you gave was already not available. Hoping for your response. Thanks
I have sticker in recovery no OS installed + no backup + locked bootloader
What can I do
----------------------/----------------------
Any one please help me
Hi ! I have a problem...
With my Honor 5C, i have no recovery, it freeze on boot for the recovery and i tried to flash TWRP but no result...
Can i have a solution for this ?
DaRkLinK_35 said:
Hi ! I have a problem...
With my Honor 5C, i have no recovery, it freeze on boot for the recovery and i tried to flash TWRP but no result...
Can i have a solution for this ?
Click to expand...
Click to collapse
You need to download full firmware for your phone version. Put it on sdnin dload folder then turn off the phone completely. After that volume up and down together (no power button). It should install the whole system again. If I remember correctly all steps :silly:
ConradP said:
You need to download full firmware for your phone version. Put it on sdnin dload folder then turn off the phone completely. After that volume up and down together (no power button). It should install the whole system again. If I remember correctly all steps :silly:
Click to expand...
Click to collapse
Close enough. Actually, you have to press volume up, down AND the power button to install the firmware.
The whole process is the following :
- Use Huawei Firmware Finder to find the correct ROM to install on your device and download it. Be sure to download the correct file corresponding to your firmware/build version. This is VERY important.
- Plug your Honor 5C to your computer and create a dload folder to the root of your internal storage.
- Extract the archive you got from Huawei Firmware Finder and put the update.app file in the dload folder.
- Now put your phone off and back on by pressing simultaneously volume up, down and power button altogether. That should take care of that soft brick of yours and reinstall the whole system.
After that, you should be good to go.
Hi ! Thanks for your reply ConradP and Zarou !
For download the firmware, I have a beta Nougat update, so... How can I find the firmware for update ?
Thanks !
DaRkLinK_35 said:
Hi ! Thanks for your reply ConradP and Zarou !
For download the firmware, I have a beta Nougat update, so... How can I find the firmware for update ?
Thanks !
Click to expand...
Click to collapse
Unfortunately, I don't know about beta update, sorry. Maybe you can download your previous firmware from HFF (the one you had before the beta) and then get back the Nougat update from where you got it in the first place.
By the way, are you sure that Nougat is supported by your device ? Apparently the beta is for some firmware variants only.
Hi !
This link was you redirected to the image for my honor 5C Nougat 7 and.. When how can I find the update for this version ?
Thanks man
http://hpics.li/cb7205f
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.
Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.
I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?
Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you
Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!
Hi,
I followed your guide and it works perfectly thanks!
So I unlocked my bootloader and installed TWRP on the p20pro. Just received status that there's full update available. I downloaded and try to install, but the phone would boot into recovery and nothing happens. How should I go about updating the firmware on the device with TWRP?
Bump
Sent from my SM-G955F using Tapatalk
twe90kid said:
So I unlocked my bootloader and installed TWRP on the p20pro. Just received status that there's full update available. I downloaded and try to install, but the phone would boot into recovery and nothing happens. How should I go about updating the firmware on the device with TWRP?
Click to expand...
Click to collapse
Either reflash the stock recovery or keep TWRP and use HuRUpdater Tool (search for it here on XDA)
Pretoriano80 said:
Either reflash the stock recovery or keep TWRP and use HuRUpdater Tool (search for it here on XDA)
Click to expand...
Click to collapse
Hi.Same issue. Does reflash stock recover wipe all my datas ?
How to use HuruUpdater as ther current TWRP does not allow to access on local files (no decryption).
THanks
JP
here's the details
- Unlock bootloader from Huawei : http://emui.huawei.com/en/plugin/unlock/index
- (It's still possible to unlock the bootloader. Just send an email to your local support or tweet them (HuaweiUK). They'll ask you for some info and send you the unlock code. Took me two days to get the code)
- TWRP : https://forum.xda-developers.com/hua...2-1-0-t3779400
- hurupdater_0.3.zip https://forum.xda-developers.com/hon...overy-t3769279 also works perfectly for P20 Pro
Magisk file (if you want to get rooted) https://******************/Magisk/Magisk-v16.0.zip
Now, get patient, an old man did it!
In future direct links for our CLT-L29 european(C432)..
http://pro-teammt.ru/firmware-databa...irmware_page=0
Click on FullOTA-MF (only!) and click on filelist I had to click several times on filelist to get the links to the 3.zip files needed (thinks to Tecalote for his patience!)
So, the difficult part was to rename the.zip files( I went to #32, page 4 and renamed exactly like it was : Download firmware files (for official firmware use Huawei Firmware Finder).
1. Put files you want to flash in a seperate folder on sdcard.
Supported zip files to flash are (name must match):
o update.zip (use FullOTA file)
o update_full_hw.zip
o update_data_full_public.zip
2. Optional: Put recovery.img (rename your TWRP downloaded "recovery_ramdisk twrp_clt_0.1.img") in same folder if you want to keep custom recovery.
3. Put HuRUpdater zip in same folder. Example:
4. Select only HuRUpdater to flash in custom recovery.
5. Follow instructions on screen. Flashing can take multiple minutes.
Then I followed exactly step by step.
It didn’t work and I had error messages flashing with hurupdater_0.3.zip:
No update_data_public.zip found in /sdcard/”name of your folder”
No update_all_hw.zip in /sdcard/”name of your folder”
As you can see the name of the .zip files did’nt match #32.
I renamed exactly as asked to get rid of the error messages, and BINGO!
Click to expand...
Click to collapse
Update CLT-L29 8.1.0.128(C432) with TWRP already installed
Update CLT-L29 8.1.0.128(C432) with TWRP already installed
Hello,
Many thanks to all of your for your kind support , so I intend to create a summary of what I did, hoping it could help others !
I had already unlock previsouly my Bootloader (of course, else this topic would not exist) via Unlock bootloader from Huawei :https://emui.huawei.com/en/unlock_detail
I already had TWRP and Magisk installed and wanted to get the latest official firmware for my P20-PRO-CLT-L29(C432) - > CLT-L29 8.1.0.128(C432).
When intending to update (from my phone), it could not work (I allways boot back to TWRP), upgrade failed.
Special credits to : @Pretoriano80
sarichter said:
@sarichter
SpH1nX said:
@SpH1nX
Start with : Do your Backup !
Removed then all security (screen unlock in developper mode =0) , no pin, no pattern, no password, no fingerprint, no faceunlock
Download the following set of files (that I've uploaded and ready to use) : https://mega.nz/#F!pEpRDB7R!pmPDjlqgtdHTs39gyLdJhg
(nota : my upload is quite slow, so please wait some hours before it is available)
It contains : HuRUpdater_0.3.zip, Magisk-v16.4-Beta.zip, twrp_clt_0.1.img, recovery.img
, update.zip, update_all_hw.zip, update_data_public.zip
- On your phone create a folder including all files from the package above.
- Boot in TWRP
- Install : HuRUpdater zip from the folder where you had put all files (no issue with decryption, at least in my case)
Nota : I had almost an heart attack during installation as it did a reference to CLT-09... not CLT-29 but it works and this despite some strange error messages.
When achieved : wipe/cache dalvik.
Phone will reboot and optimize the apps.
In my case, I lost my root access and TWRP, so I've done it again, but normally it was supposed to stay when using HurUpdater
Install TWRP (again if needed) :
- Start your device in fastboot mode
- Install the recovery using the following command : fastboot flash recovery_ramdisk twrp_clt_0.1.img
Restart with this command: fastboot reboot
Important : As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP, so the device will boot to TWRP. This is to avoid that the device boot to OS,overwritting TWRP recovery.
Reboot again in recovery
(re)Install : Magisk-v16.4-Beta.zip
Have fun,
JPh
Click to expand...
Click to collapse
Click to expand...
Click to collapse
You lost twrp because you didn't rename the file as recovery.img
SpH1nX said:
You lost twrp because you didn't rename the file as recovery.img
Click to expand...
Click to collapse
I did...but I might have used the wrong version of twrp.
Hi is there any body who testet the New CLT-029 C432B131 (8.1.0.131) ? Ihave try to download via the Firmware Finder but is Says that the File is no longer availiable on the server.
Is there another source where iam able to download the 3 Firmware files to Update with Huru Updater?
blackst225 said:
Hi is there any body who testet the New CLT-029 C432B131 (8.1.0.131) ? Ihave try to download via the Firmware Finder but is Says that the File is no longer availiable on the server.
Is there another source where iam able to download the 3 Firmware files to Update with Huru Updater?
Click to expand...
Click to collapse
You're OT here, try asking here https://forum.xda-developers.com/hu...lt-l29c432b131-firmware-improvements-t3804068
twe90kid said:
here's the details
Click to expand...
Click to collapse
THANK YOU! THIS WORKED SO PERFECTLY!
Until now, I tried the following:
Back up my data and apps to SD card with EMUI Backup App
Download OTA update (it first downloads the incremental ~100-200MB update) and click install
This doesn't work of course - TWRP tries to execute the update command but dies with error messages
Reboot, try downloading/installing updates again, the downloader then downloads the -FULL update
Extract recovery.img from update.zip>update.app
Flash stock recovery over TWRP
Initiate update again from Update App (System Settings)
Update runs smoothly, but bootloader is locked again afterwards
Restore from backup, flash TWRP again, flash SuperSU again
BUT THIS IS MARVELOUS! I will only lose SuperSU and Xposed, and given that HuRUpdater is provided with the correct filenames including TWRP renamed to recovery.img, I will just have to install SuperSU and Xposed again after updating the firmware.
It worked flawlessly with the stock firmware files from update.hicloud.com, and you'll usually find all the links a few hours after the release somewhere on the internet.
EdRoxter said:
THANK YOU! THIS WORKED SO PERFECTLY!
Until now, I tried the following:
Back up my data and apps to SD card with EMUI Backup App
Download OTA update (it first downloads the incremental ~100-200MB update) and click install
This doesn't work of course - TWRP tries to execute the update command but dies with error messages
Reboot, try downloading/installing updates again, the downloader then downloads the -FULL update
Extract recovery.img from update.zip>update.app
Flash stock recovery over TWRP
Initiate update again from Update App (System Settings)
Update runs smoothly, but bootloader is locked again afterwards
Restore from backup, flash TWRP again, flash SuperSU again
BUT THIS IS MARVELOUS! I will only lose SuperSU and Xposed, and given that HuRUpdater is provided with the correct filenames including TWRP renamed to recovery.img, I will just have to install SuperSU and Xposed again after updating the firmware.
It worked flawlessly with the stock firmware files from update.hicloud.com, and you'll usually find all the links a few hours after the release somewhere on the internet.
Click to expand...
Click to collapse
I have a few questions regarding this method to update :
Do I need to make a new backup using twrp after this update since the system files changed due to the update? (correct if i'm wrong i'm a previous iphone owner this my first android device)
Is the any method to force update 8.0 even it will erase every thing and after that just flash twrp and restore backup (i think all the methods mentioned are complicated for me)
P10 Lite
twe90kid said:
here's the details
Click to expand...
Click to collapse
Hi, I have the same problem but with my Huawei P10Lite WAS L1XA with firmware oreo installed from the phone and on reboot enters twrp mode.
Can I ask you to look for the files for my model?
(I spent three hours looking for those files but I could not find anything) ...