I am currently running the stock JB update with root right now, with the GSM tweaks in place. Texting and calls work fine as long as i set the network type on boot. However, upon trying to install any CM10 based ROM and tweaking the build.prop for GSM service, the process com.android.phone crashes on incoming calls and at the end of calls. Anyone have any idea of how to fix this? I'd really like to use the nightlies or the PACman ROM.
I'm not sure, but it may have happened on non-CM based ROMs. I can flash one and test if anyone wants to know.
DeadlySin9 said:
I am currently running the stock JB update with root right now, with the GSM tweaks in place. Texting and calls work fine as long as i set the network type on boot. However, upon trying to install any CM10 based ROM and tweaking the build.prop for GSM service, the process com.android.phone crashes on incoming calls and at the end of calls. Anyone have any idea of how to fix this? I'd really like to use the nightlies or the PACman ROM.
I'm not sure, but it may have happened on non-CM based ROMs. I can flash one and test if anyone wants to know.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=41353039&postcount=1085
Thanks for that, I must have skipped over that when I searched.
Q&A for CM-12.0 (LP) UNOFFICIAL nightly builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CM-12.0 (LP) UNOFFICIAL nightly builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is this a unified build for all carriers?
network issues with xt1093 uscc
great rom! everything seems to work smoothly. the only issue i have had is trying to connect to my network. Do i need to configure the APN to my carrier or is there something i am missing? i installed correctly using TWRP, factory reset, flash zip, cleared dalvik, reboot,....
I'm assuming we'll lose the moto things like active display and the phone talking when at home and on the road?
network issues with xt1093 uscc
Well i flashed back to stock and had the same network issues with my stock rom. i found a number to re-register on the uscc network. it took like 15 seconds on an automated line and everything was setup, could make calls out, receive calls, texts, data,...etc.
I tried to reflash the newest nightly (01/16/2015) and setup the network using the same number from before. Had to change the network config file and modify the APN to my network. the config was LTE/CDMA/GSM auto (PRL) (prior to that it was set to LTE/GSM auto (PRL)) that put me into roaming long enough to dial the setup number. the setup went fine but after it finished......Nothing. i couldnt even force roaming in the network config.
I am thinking this is a modem firmware issue. I dont have an logcat files (working on that now). i tried to flash the stock modem firmware after flashing the nightly but didn't help
Still an awesome rom and would love to get networking running for this device.
NOOBSABOT said:
Well i flashed back to stock and had the same network issues with my stock rom. i found a number to re-register on the uscc network. it took like 15 seconds on an automated line and everything was setup, could make calls out, receive calls, texts, data,...etc.
I tried to reflash the newest nightly (01/16/2015) and setup the network using the same number from before. Had to change the network config file and modify the APN to my network. the config was LTE/CDMA/GSM auto (PRL) (prior to that it was set to LTE/GSM auto (PRL)) that put me into roaming long enough to dial the setup number. the setup went fine but after it finished......Nothing. i couldnt even force roaming in the network config.
I am thinking this is a modem firmware issue. I dont have an logcat files (working on that now). i tried to flash the stock modem firmware after flashing the nightly but didn't help
Still an awesome rom and would love to get networking running for this device.
Click to expand...
Click to collapse
I think that the radio is broken on the last couple of nightlies across many different devices. Try an older version and see if you have better luck.
i'm on stock 5.0 rooted xt1092
doing nandroid and flashing last build this evening.
flashed and no problems found, but have no more root permissions, do i have to re-root using chainfire?
michyall said:
flashed and no problems found, but have no more root permissions, do i have to re-root using chainfire?
Click to expand...
Click to collapse
Did you enable it in developers options?
matt99017d said:
Did you enable it in developers options?
Click to expand...
Click to collapse
Yes sir. I've solved fastbooting again CF. Maybe after format you loose root permissions.
No Network
I've flashed several of the nightlies (both early and most recent) and none of them have a network connection. I've tried factory resets, cache wipe, the usual and no luck. Is there a specific baseband version I need to be on or any APN tweaks I need to do?
[edit] I have the tmo pure edition fwiw.
CrepuscularSoul said:
I've flashed several of the nightlies (both early and most recent) and none of them have a network connection. I've tried factory resets, cache wipe, the usual and no luck. Is there a specific baseband version I need to be on or any APN tweaks I need to do?
[edit] I have the tmo pure edition fwiw.
Click to expand...
Click to collapse
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
crpalmer said:
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
Click to expand...
Click to collapse
---------- Post added at 01:31 PM ---------- Previous post was at 12:38 PM ----------
CrepuscularSoul said:
I'm pretty sure that's what I'm on. System is 22.21.11.victara_tmo.en.US, build LXE2246-11, and Baseband MSM8974_4125.184.08.27.01R
If that's not the latest let me know and I'll grab the updated ones and flash those through fastboot and try again. If they are is there anything I could grab with the syslog app or adb that might help in figuring it out?
Click to expand...
Click to collapse
Got it. The APN protocol for fast tmobile com in my stock rom was IPV6, and when I flashed this it was IPV4. Changing that got my data connection working.
crpalmer said:
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
Click to expand...
Click to collapse
I have the T-Mobile pure and left the base as 4.4.4 and flashed cm12. Signal is awesome as are the transfer rates.
I've tried liquid and slim with the same results.
How will the battery? Better or worse than stock?
Works in XT1097, right?
I did a clean flash on my xt1092. On reboot I get a screen that says encryption failed, with a button to do factory reset. Doing factory reset just brings me back to this same screen. I don't even think that my storage is encrypted on stock. Any help?
loic5032 said:
I did a clean flash on my xt1092. On reboot I get a screen that says encryption failed, with a button to do factory reset. Doing factory reset just brings me back to this same screen. I don't even think that my storage is encrypted on stock. Any help?
Click to expand...
Click to collapse
you have to go into TWRP, then WIPE then Format Data. then install rom and gapps.
you will format your memory loosing everything on your phone. i used to plug an usb otg with rom and gapps files.
double tap
Can we get some double tap to wake love? That was basically my favorite thing about my oneplus one and i put cm12 on that and works great
Let me know if thats going to happen or not because i cant live without that or the moto display
I think double tap to wake is not an interesting feature for a phone. Sure for a tablet but for your victara not. Waking up every two touches is not a good way. Ambient display is the best way for me, as good for looking for notifications as for unlocking.
I prefer power button indeed
michyall said:
I think double tap to wake is not an interesting feature for a phone. Sure for a tablet but for your victara not. Waking up every two touches is not a good way. Ambient display is the best way for me, as good for looking for notifications as for unlocking.
I prefer power button indeed
Click to expand...
Click to collapse
Well i mean just having the option would be nice
its personal preference and my case makes it very difficult to press the power button
I tried to flash this cm 12.1 with root and twrp and did it successfully, but I don't know what gapps to flash! Tested several 5.1.1 gapps but still doesn't get the LTE to connect to network.
Does anyone knows which gapps that will fix this problem?
/Daniel
verify apn settings?
Gapps is not going to fix that. You either need to check apns or change your cellular network settings to gsm/cdma, whichever applies to your carrier
Sent from my Nexus 6 using Tapatalk
"No SIM Card" and "Network not Available" errors on multiple Custom ROMs
I've searched around and haven't found an answer yet. I have a rooted Nexus 6 with Project Fi. With just rooting and the stock ROM, the phone works fine. When I flashboot a new stock ROM everything works ok, both Lollipop and Marshmallow. When I clean install a Custom ROM (i've tried several), I either get "no sim card" or I start up fine, but when i try to make a call from home where the cellular coverage is bad, I get the error "Cellular Network not available". On the Stock ROM's (still rooted) wifi calling with Project Fi works without a hitch.
This started a few weeks ago, before that I had PureNexus working fine at home, then I got home and started getting this error. The only fix that has worked so far is flashbooting a stock image.
Any suggestions out there?
Cutterstark said:
.... new stock ROM everything works ok, both Lollipop and Marshmallow. When I clean install a Custom ROM (i've tried several), I either get "no sim card"
.Any suggestions out there?
Click to expand...
Click to collapse
Because you mentioned LP and MM. When updating / changing from LP to MM, incl. custom M-roms, you need to flash m-bootloader and m-radio first.
Well I am on stock MM now with everything working fine, and when I try clean installing MM PureNexus or Cyanogen I get the network not available error.
Are you going back to LP now? Or which version of these roms?
Also I've read, not all work with Fi.
Sent from my Nexus 6 running cyosp using Tapatalk
istperson said:
Are you going back to LP now? Or which version of these roms?
Also I've read, not all work with Fi.
Sent from my Nexus 6 running cyosp using Tapatalk
Click to expand...
Click to collapse
As stated Project FI doesnt really work on alot of AOSP based roms as alot of the stuff for it from google is closed source.
I have an Android One phone, and on the stock ROM LTE works fine with Boost Mobile (Sprint). But, when using LineageOS (or Resurrection Remix), I only get 3G.
The APN settings seem correct, but when I click "carrier v settings" it crashes. On the stock ROM, this brings up SprintDM to let me update the PRL.
Is there a way to get LTE working in a custom ROM? I tried using Titanium Backup to backup SprintDM from stock, but when I tried to restore it on the custom ROM, it just sat there and didn't do anything.
I've read that CDMA is a mess, and I may just stick to the stock ROM if LTE doesn't work without it.