Database Develop

I can't Connect My Bricked Phone..

Hello Xda... I Can't Connect My bricked Phone to Pc. When i put it and turn it on flash mode it tells that failed to install the device drivers. Seus , PC Companion , Flashtool Can't Recognize it. can anyone help me? Thanks In advance.

First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App

dsaklein said:
First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App
Click to expand...
Click to collapse
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?

eu8umhc said:
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?
Click to expand...
Click to collapse
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".

B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
i See The Flash Mode Green LEd yes. When I Start it, i see the SOny ericsson logo and it stucks there. i try to connecto to pc and it can't install drivers for device. how can i rescue it? tommorow i have a lesson and i need it :S and also it tells that cant recognized.

B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks

Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
eu8umhc said:
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks
Click to expand...
Click to collapse
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.

B.Jay said:
Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.
Click to expand...
Click to collapse
It's ok . the info you gave me is important. now i will read the link you gave me. Big Thanks Again..

can someone help me please...i restored a backup of gingerdx and after that i'm stuck in SE screen and led not working when connected to pc

[Q] Can't go to flashmode on my Z

after updating to .253 i can't go to the flashmode and i can't flash any thing via flashtool any help ?

ThE_ReD_SuRf said:
after updating to .253 i can't go to the flashmode and i can't flash any thing via flashtool any help ?
Click to expand...
Click to collapse
Rebooted the comp, reinstalled drivers etc?
From me to you.

XperienceD said:
Rebooted the comp, reinstalled drivers etc?
From me to you.
Click to expand...
Click to collapse
thanks for advice but i try it before not working !

stuck in bootloop

hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...

shprakash said:
hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
Click to expand...
Click to collapse
Your drivers are not installed properly. In Windows 10 goto the advanced settings and disable the signature verification first. After that install the driver for xperia z. It will work.

still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...

shprakash said:
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
Click to expand...
Click to collapse
Can you please describe the error?

Ess Arr said:
Can you please describe the error?
Click to expand...
Click to collapse
ILL post the screenshot once wen i reach home..

shprakash said:
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
Click to expand...
Click to collapse
Did you disable driver signature enforcement before installing the drivers?

shprakash said:
hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
Click to expand...
Click to collapse
There are plenty of threads about bootloop.
Also, this should be in Q&A section.
Anyway, make sure to install correct drivers. Ur flashmode is probably just fine.
Mine blinks and goes off also, but flashmode works.

Drivers are installed and driver signature has been disabled.. but finding error while flashing
wen i remove battery and connect Usb cable den the device shows tat it has connected in flash mode nor in fastboot mode... one of the IC is been missing or removed i dont know ill send the Pic after reaching home... i couldn't post the Screen Shot... ill do it today by night....
Pic has been attached below and can see the pointed area where the IC is missing or is it not available... plz let me know..

Need Help Friends!,

Good evening everyone,
i have sony xperia z version XperiaZ_10.5.1.A.0.292 version..i want to flash kernel Xperiaz_10.5.A.0.230_kernel_only.ftf root my phone, install recovery then install back XperiaZ_10.5.1.A.0.292_kernel_only.ftf.
as following thread https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873
i tried all flashtool versions Flashtool-0.6.6-windows,flashtool-0.9.9.0-windows,flashtool-0.9.19.8-windows,
flashtool-0.9.19.10-windows and flashtool-0.9.23.1, to flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf
but went unsuccessful. Sometimes i get loader.sin finished with errors sometimes,sometimes it takes ages to check header,sometimes it takes ages in flashing loader.
Here are some screenshots attached of the error im facing,..
please be kind to shower some light of your knowledge to me so i can successful flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf using flashmode and please be kind to illustrate what went wrong and what could be my solution to my problem
i would wait for your kind assistance,
appreciating your help and time,
sameer

please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618

HI
dummytest97 said:
please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618
Click to expand...
Click to collapse
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.

[email protected] said:
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.
Click to expand...
Click to collapse
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?

hi
dummytest97 said:
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?
Click to expand...
Click to collapse
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer

[email protected] said:
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer
Click to expand...
Click to collapse
I saw one of the driver failed to installed, if it not related with flash mode driver then let it be...that driver you install from flashtool by androxyde?
If yes the driver should not be the problem anymore..
I use driver from flashtool too located at disk C/flashtool/driver...it install successfully without any problem..
May i know what's your phone condition before you start flashing? Is it working fine before?

One more..try using another usb port too..

hi
dummytest97 said:
One more..try using another usb port too..
Click to expand...
Click to collapse
hey brother,installed windows 10 and windows 7 ultimate a fresh,installed all drivers in windows 7 successful.but when i try to use flashtool-0.9.18.6-windows my sony xperia z stuck a the screen processing of kernel.sin finished with errors for hours..don't know what to do.
previously it worked well everything..tried to update the recovery and it all started... tried to use xperia companion it failed ,...flashtool failed..update failed,..please connect your phone with computer and try again.
Any solutions,suggestions...please kindly spare.
thanks sameer

My Xperia SOG01 is hardbricked

Hello friends,
I have a sony xperia 1 mark 2 sog01 device.
My device is hard bricked. device does not boot into fastboot. nothing appears on the screen. it just goes into flash mode.
But the software is not installed via flashmod. The new flasher program stuck in the dump TA section and gives an error.
Is there a way to get this device to edl?
Does anyone know the test point?
Thanks

Have you gave companion a try ? Keep that flashmode and let companion do the job. If it can detect, 99% your device will boot.

Redaki said:
Have you gave companion a try ? Keep that flashmode and let companion do the job. If it can detect, 99% your device will boot.
Click to expand...
Click to collapse
not working bro, thanks for reply

kildimsi said:
not working bro, thanks for reply
Click to expand...
Click to collapse
your Xperia sog01 is from Japan.. which Rom you were trying to flash in it?