My Xperia SOG01 is hardbricked - Sony Xperia 1 II Questions & Answers

Hello friends,
I have a sony xperia 1 mark 2 sog01 device.
My device is hard bricked. device does not boot into fastboot. nothing appears on the screen. it just goes into flash mode.
But the software is not installed via flashmod. The new flasher program stuck in the dump TA section and gives an error.
Is there a way to get this device to edl?
Does anyone know the test point?
Thanks

Have you gave companion a try ? Keep that flashmode and let companion do the job. If it can detect, 99% your device will boot.

Redaki said:
Have you gave companion a try ? Keep that flashmode and let companion do the job. If it can detect, 99% your device will boot.
Click to expand...
Click to collapse
not working bro, thanks for reply

kildimsi said:
not working bro, thanks for reply
Click to expand...
Click to collapse
your Xperia sog01 is from Japan.. which Rom you were trying to flash in it?

Related

I can't Connect My Bricked Phone..

Hello Xda... I Can't Connect My bricked Phone to Pc. When i put it and turn it on flash mode it tells that failed to install the device drivers. Seus , PC Companion , Flashtool Can't Recognize it. can anyone help me? Thanks In advance.
First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App
dsaklein said:
First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App
Click to expand...
Click to collapse
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?
eu8umhc said:
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?
Click to expand...
Click to collapse
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
i See The Flash Mode Green LEd yes. When I Start it, i see the SOny ericsson logo and it stucks there. i try to connecto to pc and it can't install drivers for device. how can i rescue it? tommorow i have a lesson and i need it :S and also it tells that cant recognized.
B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks
Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
eu8umhc said:
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks
Click to expand...
Click to collapse
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.
B.Jay said:
Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.
Click to expand...
Click to collapse
It's ok . the info you gave me is important. now i will read the link you gave me. Big Thanks Again..
can someone help me please...i restored a backup of gingerdx and after that i'm stuck in SE screen and led not working when connected to pc

[Q] Bricked Xperia Z, help please?

I've looked through all the threads and nothing's worked for me yet, so this is my last resort.
I somehow messed up flashing CM 10 from the free xperia project and my phone would only get to recovery. I then tried to re-flash the advanced stock kernel which I had on there before, but then I lost recovery too. I could only get to fastboot and flashmode. I tried SUS but got nowhere because I have modified firmware on the device. I tried using flashtool to re-install stock firmware but it got stuck on flashing data, so I closed the window. I think this must have been a big mistake because now I can't even get into fastboot mode. I still get the device connected sound when I plug it into my computer. It then disconnects and reconnects a few times, before finally disconnecting.
What should I do?
Edit: I've suddenly managed to get into fastboot mode (blue LED), is this all that is needed?
http://forum.xda-developers.com/showthread.php?t=2215212
Try post #3
thev
Dsteppa said:
http://forum.xda-developers.com/showthread.php?t=2215212
Try post #3
Click to expand...
Click to collapse
I can't use SUS and I'm currently waiting for a login for emma (taking ages)
S1ippery said:
I can't use SUS and I'm currently waiting for a login for emma (taking ages)
Click to expand...
Click to collapse
Why not use the repair tool from Sony?
Dsteppa said:
Why not use the repair tool from Sony?
Click to expand...
Click to collapse
He cannot because of unlocked bootloader.
Emma or flashtool is the options left.
Sent from my C6602 using xda premium
Dsteppa said:
Why not use the repair tool from Sony?
Click to expand...
Click to collapse
Isn't SUS (Sony Updater Service) the repair tool? I couldn't use it because it wouldn't let me - I had modified firmware on the device and it detected that. Anyway, I actually managed to get it fixed. I was unfortunately using the wrong version of flashtool. I was using 0.9.10.1 whereas 0.9.10.2beta4 is needed for the Xperia Z. The earlier version would get stuck on flashing data. I then just flashed the stock firmware and it worked fine. What was really odd though was sometimes it would enter flash mode fine (pressing volume up while connecting USB) but other times it wouldn't. I think this might have been because it was getting low on charge.

Xperia Z (C6603) stuck at bootanimation

Hi, yesterday i tried to install a soundmod manually on my xperia z. But now its stuck in the bootanimation. Any idea how to fix that? Sorry i'm a noob. It's rooted and running stock lollipop with locked bootloader. Thanks for your help
Asdfmoviee said:
Hi, yesterday i tried to install a soundmod manually on my xperia z. But now its stuck in the bootanimation. Any idea how to fix that? Sorry i'm a noob. It's rooted and running stock lollipop with locked bootloader. Thanks for your help
Click to expand...
Click to collapse
Just flash the ftf of ur device via flash tool...
DastanShaikh said:
Just flash the ftf of ur device via flash tool...
Click to expand...
Click to collapse
I tried that too but i get this error in flashtool: Processing of loader.sin finished with errors. Any idea how to fix that?
Asdfmoviee said:
I tried that too but i get this error in flashtool: Processing of loader.sin finished with errors. Any idea how to fix that?
Click to expand...
Click to collapse
Your ftf might be broken... Try another.. One
DastanShaikh said:
Your ftf might be broken... Try another.. One
Click to expand...
Click to collapse
ok i will try but i think there is a problem with the flash driver. I also tried to repair it with sony pc companion and when i try to enter flashmode nothing happens. The green light blinks for fewer then a second. And when windows trys to install the driver it fails. It says failed to install SOMC flash device. Fastboot ist working fine. I will try it tomorrow on another computer. I hope it works.
Sorry for my english its not my first language.
Asdfmoviee said:
ok i will try but i think there is a problem with the flash driver. I also tried to repair it with sony pc companion and when i try to enter flashmode nothing happens. The green light blinks for fewer then a second. And when windows trys to install the driver it fails. It says failed to install SOMC flash device. Fastboot ist working fine. I will try it tomorrow on another computer. I hope it works.
Sorry for my english its not my first language.
Click to expand...
Click to collapse
The drivers is in the flash tool folder >drivers
Do install from there...
DastanShaikh said:
The drivers is in the flash tool folder >drivers
Do install from there...
Click to expand...
Click to collapse
I already did i will now try to delete them and reinstall the drivers.
DastanShaikh said:
The drivers is in the flash tool folder >drivers
Do install from there...
Click to expand...
Click to collapse
Didnt work still the same error
Asdfmoviee said:
Didnt work still the same error
Click to expand...
Click to collapse
Whats the status of drivers..?
Connect ur phone and open device manager... And check.. If there is any exclamation sign
DastanShaikh said:
Whats the status of drivers..?
Connect ur phone and open device manager... And check.. If there is any exclamation sign
Click to expand...
Click to collapse
Finally i got the ftf flashed. Not on the PC but on the Mac book of my sister. Thanks for your help
Asdfmoviee said:
Finally i got the ftf flashed. Not on the PC but on the Mac book of my sister. Thanks for your help
Click to expand...
Click to collapse
No need to say thanks just press the thanks button

aq4502 not booting up..

i have probably bricked my phone . not booting up. doesn't even charge. can't boot to recovery as well. now i am trying to unbrick it using sp flash tool but it isn't happening. the phone keeps on connecting and disconnecting. i can see it is being recognized as mt65xx pre loader in device manager and when i click download in sp flash tool it just gets stuck nothing happens. help:crying::crying::crying:
konankiakshay said:
i have probably bricked my phone . not booting up. doesn't even charge. can't boot to recovery as well. now i am trying to unbrick it using sp flash tool but it isn't happening. the phone keeps on connecting and disconnecting. i can see it is being recognized as mt65xx pre loader in device manager and when i click download in sp flash tool it just gets stuck nothing happens. help:crying::crying::crying:
Click to expand...
Click to collapse
@konankiakshay,
you should press download button first, and after that you should connect your phone.
Hope this helps.
Utkarsh_Tiwari said:
@konankiakshay,
you should press download button first, and after that you should connect your phone.
Hope this helps.
Click to expand...
Click to collapse
yes i know that buddy. the phone is connecting and disconnecting and the flashing process doesn't even start in sp flash tool.
konankiakshay said:
yes i know that buddy. the phone is connecting and disconnecting and the flashing process doesn't even start in sp flash tool.
Click to expand...
Click to collapse
bro, you haven't installed the drivers for your phone.
Install tinno preloader drivers (just google it & you'll find), and repeat the process.
thank you for commenting mate. got it back to life.
konankiakshay said:
thank you for commenting mate. got it back to life.
Click to expand...
Click to collapse
Bro where did u find the preloader drivers.

Need Help Friends!,

Good evening everyone,
i have sony xperia z version XperiaZ_10.5.1.A.0.292 version..i want to flash kernel Xperiaz_10.5.A.0.230_kernel_only.ftf root my phone, install recovery then install back XperiaZ_10.5.1.A.0.292_kernel_only.ftf.
as following thread https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873
i tried all flashtool versions Flashtool-0.6.6-windows,flashtool-0.9.9.0-windows,flashtool-0.9.19.8-windows,
flashtool-0.9.19.10-windows and flashtool-0.9.23.1, to flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf
but went unsuccessful. Sometimes i get loader.sin finished with errors sometimes,sometimes it takes ages to check header,sometimes it takes ages in flashing loader.
Here are some screenshots attached of the error im facing,..
please be kind to shower some light of your knowledge to me so i can successful flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf using flashmode and please be kind to illustrate what went wrong and what could be my solution to my problem
i would wait for your kind assistance,
appreciating your help and time,
sameer
please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618
HI
dummytest97 said:
please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618
Click to expand...
Click to collapse
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.
[email protected] said:
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.
Click to expand...
Click to collapse
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?
hi
dummytest97 said:
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?
Click to expand...
Click to collapse
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer
[email protected] said:
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer
Click to expand...
Click to collapse
I saw one of the driver failed to installed, if it not related with flash mode driver then let it be...that driver you install from flashtool by androxyde?
If yes the driver should not be the problem anymore..
I use driver from flashtool too located at disk C/flashtool/driver...it install successfully without any problem..
May i know what's your phone condition before you start flashing? Is it working fine before?
One more..try using another usb port too..
hi
dummytest97 said:
One more..try using another usb port too..
Click to expand...
Click to collapse
hey brother,installed windows 10 and windows 7 ultimate a fresh,installed all drivers in windows 7 successful.but when i try to use flashtool-0.9.18.6-windows my sony xperia z stuck a the screen processing of kernel.sin finished with errors for hours..don't know what to do.
previously it worked well everything..tried to update the recovery and it all started... tried to use xperia companion it failed ,...flashtool failed..update failed,..please connect your phone with computer and try again.
Any solutions,suggestions...please kindly spare.
thanks sameer

Categories

Resources