Need Help Friends!, - Xperia Z Q&A, Help & Troubleshooting

Good evening everyone,
i have sony xperia z version XperiaZ_10.5.1.A.0.292 version..i want to flash kernel Xperiaz_10.5.A.0.230_kernel_only.ftf root my phone, install recovery then install back XperiaZ_10.5.1.A.0.292_kernel_only.ftf.
as following thread https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873
i tried all flashtool versions Flashtool-0.6.6-windows,flashtool-0.9.9.0-windows,flashtool-0.9.19.8-windows,
flashtool-0.9.19.10-windows and flashtool-0.9.23.1, to flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf
but went unsuccessful. Sometimes i get loader.sin finished with errors sometimes,sometimes it takes ages to check header,sometimes it takes ages in flashing loader.
Here are some screenshots attached of the error im facing,..
please be kind to shower some light of your knowledge to me so i can successful flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf using flashmode and please be kind to illustrate what went wrong and what could be my solution to my problem
i would wait for your kind assistance,
appreciating your help and time,
sameer

please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618

HI
dummytest97 said:
please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618
Click to expand...
Click to collapse
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.

[email protected] said:
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.
Click to expand...
Click to collapse
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?

hi
dummytest97 said:
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?
Click to expand...
Click to collapse
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer

[email protected] said:
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer
Click to expand...
Click to collapse
I saw one of the driver failed to installed, if it not related with flash mode driver then let it be...that driver you install from flashtool by androxyde?
If yes the driver should not be the problem anymore..
I use driver from flashtool too located at disk C/flashtool/driver...it install successfully without any problem..
May i know what's your phone condition before you start flashing? Is it working fine before?

One more..try using another usb port too..

hi
dummytest97 said:
One more..try using another usb port too..
Click to expand...
Click to collapse
hey brother,installed windows 10 and windows 7 ultimate a fresh,installed all drivers in windows 7 successful.but when i try to use flashtool-0.9.18.6-windows my sony xperia z stuck a the screen processing of kernel.sin finished with errors for hours..don't know what to do.
previously it worked well everything..tried to update the recovery and it all started... tried to use xperia companion it failed ,...flashtool failed..update failed,..please connect your phone with computer and try again.
Any solutions,suggestions...please kindly spare.
thanks sameer

Related

[Q] Hard bricked !

guys i was trying to restore the ta backup to relock the bootloader. after it was done it tried to restart the phone and after the shut down the phone was hard bricked !
unfortunately i was about to recover it so I followed this thread : http://forum.xda-developers.com/showthread.php?t=2646405
but i had a problem during the flashing
i get this error after some proceeds :
MINOR ERROR [0x80080021_, err:0017 ]
error while uploading final HDR block
break
finished
anyone knows what to do now?
Guys pleeaaaassseeeee i need a hand over here help me ;( ;(
Do not bump a thread within 24 hours.
Download a stock ftf and flash it using flashtool
Sent from my C6903 using XDA Premium 4 mobile app
gregbradley said:
Do not bump a thread within 24 hours.
Download a stock ftf and flash it using flashtool
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
give me a break! man! thanks for noticing! i know how to flash a ftf file.. the phone is dead totally. no flash mode or fastboot mode
It already happened to me, you just have to flash again your phone with your computer and it work (for me).
megavigore said:
It already happened to me, you just have to flash again your phone with your computer and it work (for me).
Click to expand...
Click to collapse
no way man!its not a soft brick! you cant use flash mode or fastboot mode . just emergency mode ! and thats not working for me neither.
dont know what to do... seems its dead
What is emergency mode?
If there is no response then stick it on charge for 24 hours, do not touch it then try flashing a stock FTF again
Greg is trying to help you mate.
And he's right, there's a time difference and you have to wait for guys to see your thread...
Check do you have latest flashtool
Check do you have correct drivers
Check is your ftf corrupted (download a new one)
, hard restart your device (vol up+power).
Open flashtool and hit start, wait till flashtool prepares fw and ask you to connect device.
Then connect device.
If that won't work, try to download another ftf file...
Maybe you have corrupted ftf and that's causing a problem...
Sent from my D6503 using Tapatalk
funky0308 said:
Greg is trying to help you mate.
And he's right, there's a time difference and you have to wait for guys to see your thread...
Check do you have latest flashtool
Check do you have correct drivers
Check is your ftf corrupted (download a new one)
, hard restart your device (vol up+power).
Open flashtool and hit start, wait till flashtool prepares fw and ask you to connect device.
Then connect device.
If that won't work, try to download another ftf file...
Maybe you have corrupted ftf and that's causing a problem...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
thanks to everyone here who is trying to help me out . but guys, i'm having no flashmode no fast boot mod..i know how to flash a ftf..but this one is different! there is nothing except of a red blinking led.. its hard braked! it will not show anything when i connect to pc. no Power+vol up works. it connect just when you connect the testpiont to GND and some stuff to get connected in emergency mode...
when i connect it normally no log adds in flashtool or any sound on windows..
NiM72NiK said:
thanks to everyone here who is trying to help me out . but guys, i'm having no flashmode no fast boot mod..i know how to flash a ftf..but this one is different! there is nothing except of a red blinking led.. its hard braked! it will not show anything when i connect to pc. no Power+vol up works. it connect just when you connect the testpiont to GND and some stuff to get connected in emergency mode...
when i connect it normally no log adds in flashtool or any sound on windows..
Click to expand...
Click to collapse
Uff...
Are you sure you restored right/yours TS backup?
I have a friend who restored Z1 TA backup to Z2, this things happen so who knows...
It's really odd if you restored your backup on stock fw and something like that happened..
Now I realized you wrote "I had flashtool problems..."
I thought you have problems in flashtool now, that's why I said try with another ftf or another flashtool version...
If you got that, and you did, while you were flashing ftf....I believe you are, unfortunately, right, this is hard brick.
BTW - which firmware you tried to flash?
Sent from my D6503 using Tapatalk
funky0308 said:
Uff...
Are you sure you restored right/yours TS backup?
I have a friend who restored Z1 TA backup to Z2, this things happen so who knows...
It's really odd if you restored your backup on stock fw and something like that happened..
Now I realized you wrote "I had flashtool problems..."
I thought you have problems in flashtool now, that's why I said try with another ftf or another flashtool version...
If you got that, and you did, while you were flashing ftf....I believe you are, unfortunately, right, this is hard brick.
BTW - which firmware you tried to flash?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
i was un iHackers 4.2 using doomkernel v21 tried to relock the bootloader( I have done that before) but this time it tried to restart but this happnd after the restart process..
seems it done, right?
NiM72NiK said:
i was un iHackers 4.2 using doomkernel v21 tried to relock the bootloader( I have done that before) but this time it tried to restart but this happnd after the restart process..
seems it done, right?
Click to expand...
Click to collapse
you need to be on a stock kernel if you relock the bootloader.
You should have flashed a stock FTF immediately after relocking and before restarting.
The solution is to flash a stock FTF
and you have not done this yet
gregbradley said:
What is emergency mode?
If there is no response then stick it on charge for 24 hours, do not touch it then try flashing a stock FTF again
Click to expand...
Click to collapse
please charge it for 24 hours without touching it, then try again
coming back to this thread. Wondered if all was well - ended well or still stuck ?
I tried to install magisk using bridge approach
and ended up with something that will get to just bluelight ( flashboot ?) mode . I am downloading a stock T-Mob FTF. J-FYI this is an operator locked boot loader. I dunno - is it poss to permanently unlock it and install Cust ROM ? I want to :
-- Recover my data from the dead prev . install
--Have a ROM ( stock or custom ) with Magisk installed.
My plan :
-- Flashtool install 4.4 FTF
-- _______________ <----- Need help here. How do I get magisk working ?
Note that AFAIK for locked bootloader , /system is RO

Xperia Z (C6603) stuck at bootanimation

Hi, yesterday i tried to install a soundmod manually on my xperia z. But now its stuck in the bootanimation. Any idea how to fix that? Sorry i'm a noob. It's rooted and running stock lollipop with locked bootloader. Thanks for your help
Asdfmoviee said:
Hi, yesterday i tried to install a soundmod manually on my xperia z. But now its stuck in the bootanimation. Any idea how to fix that? Sorry i'm a noob. It's rooted and running stock lollipop with locked bootloader. Thanks for your help
Click to expand...
Click to collapse
Just flash the ftf of ur device via flash tool...
DastanShaikh said:
Just flash the ftf of ur device via flash tool...
Click to expand...
Click to collapse
I tried that too but i get this error in flashtool: Processing of loader.sin finished with errors. Any idea how to fix that?
Asdfmoviee said:
I tried that too but i get this error in flashtool: Processing of loader.sin finished with errors. Any idea how to fix that?
Click to expand...
Click to collapse
Your ftf might be broken... Try another.. One
DastanShaikh said:
Your ftf might be broken... Try another.. One
Click to expand...
Click to collapse
ok i will try but i think there is a problem with the flash driver. I also tried to repair it with sony pc companion and when i try to enter flashmode nothing happens. The green light blinks for fewer then a second. And when windows trys to install the driver it fails. It says failed to install SOMC flash device. Fastboot ist working fine. I will try it tomorrow on another computer. I hope it works.
Sorry for my english its not my first language.
Asdfmoviee said:
ok i will try but i think there is a problem with the flash driver. I also tried to repair it with sony pc companion and when i try to enter flashmode nothing happens. The green light blinks for fewer then a second. And when windows trys to install the driver it fails. It says failed to install SOMC flash device. Fastboot ist working fine. I will try it tomorrow on another computer. I hope it works.
Sorry for my english its not my first language.
Click to expand...
Click to collapse
The drivers is in the flash tool folder >drivers
Do install from there...
DastanShaikh said:
The drivers is in the flash tool folder >drivers
Do install from there...
Click to expand...
Click to collapse
I already did i will now try to delete them and reinstall the drivers.
DastanShaikh said:
The drivers is in the flash tool folder >drivers
Do install from there...
Click to expand...
Click to collapse
Didnt work still the same error
Asdfmoviee said:
Didnt work still the same error
Click to expand...
Click to collapse
Whats the status of drivers..?
Connect ur phone and open device manager... And check.. If there is any exclamation sign
DastanShaikh said:
Whats the status of drivers..?
Connect ur phone and open device manager... And check.. If there is any exclamation sign
Click to expand...
Click to collapse
Finally i got the ftf flashed. Not on the PC but on the Mac book of my sister. Thanks for your help
Asdfmoviee said:
Finally i got the ftf flashed. Not on the PC but on the Mac book of my sister. Thanks for your help
Click to expand...
Click to collapse
No need to say thanks just press the thanks button

stuck in bootloop

hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
shprakash said:
hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
Click to expand...
Click to collapse
Your drivers are not installed properly. In Windows 10 goto the advanced settings and disable the signature verification first. After that install the driver for xperia z. It will work.
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
shprakash said:
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
Click to expand...
Click to collapse
Can you please describe the error?
Ess Arr said:
Can you please describe the error?
Click to expand...
Click to collapse
ILL post the screenshot once wen i reach home..
shprakash said:
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
Click to expand...
Click to collapse
Did you disable driver signature enforcement before installing the drivers?
shprakash said:
hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
Click to expand...
Click to collapse
There are plenty of threads about bootloop.
Also, this should be in Q&A section.
Anyway, make sure to install correct drivers. Ur flashmode is probably just fine.
Mine blinks and goes off also, but flashmode works.
Drivers are installed and driver signature has been disabled.. but finding error while flashing
wen i remove battery and connect Usb cable den the device shows tat it has connected in flash mode nor in fastboot mode... one of the IC is been missing or removed i dont know ill send the Pic after reaching home... i couldn't post the Screen Shot... ill do it today by night....
Pic has been attached below and can see the pointed area where the IC is missing or is it not available... plz let me know..

how to returne to the original ROM after installing nougat ?

how can downgrade my xperia Z1 after installing nougat AOSP
I'm using Ubuntu 16.04
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
m3asmi said:
how can downgrade my xperia Z1 after installing nougat AOSP
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
Click to expand...
Click to collapse
have you check android debugging and unknown sources?
pattriccio said:
have you check android debugging and unknown sources?
Click to expand...
Click to collapse
yes I did
I installed flashtool in windows now I solved the problem
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
ajdin.cekic said:
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
Click to expand...
Click to collapse
follow this tutorial https://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
ajdin.cekic said:
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
Click to expand...
Click to collapse
OK, so I'm gonna assume that you have at least a working recovery. Here's a possible solution: Have you tried flashing a stock based custom ROM (e.g: Kryptonian, MX Rom or DStrikers Z1 Kai)? Then, from there you can flash a pure stock via flashtool.
guys, this was mentioned a couple times already, best way is to download Emma from Sony and flash the official software. Then you can flash a kernel via fastboot again and all should work. This is due to Nougat is corrupting the apps log partition which is not in use there, but is required for stock Lollipop. I did that a couple times and all worked fine...
Ok, i will try the mxrom and than, but i tried that already and do i need first to lock my bootloader and then flash stock, emma didnt recognice my phone same as flashtool and one thing more, i tried to flash kernel sin from ftf via fastboot bud it says image is not boot image and says fail. I tried on win 10 same to do win recognizes phone as somc bit flashtool doesnt recognize phone.

My Xperia SOG01 is hardbricked

Hello friends,
I have a sony xperia 1 mark 2 sog01 device.
My device is hard bricked. device does not boot into fastboot. nothing appears on the screen. it just goes into flash mode.
But the software is not installed via flashmod. The new flasher program stuck in the dump TA section and gives an error.
Is there a way to get this device to edl?
Does anyone know the test point?
Thanks
Have you gave companion a try ? Keep that flashmode and let companion do the job. If it can detect, 99% your device will boot.
Redaki said:
Have you gave companion a try ? Keep that flashmode and let companion do the job. If it can detect, 99% your device will boot.
Click to expand...
Click to collapse
not working bro, thanks for reply
kildimsi said:
not working bro, thanks for reply
Click to expand...
Click to collapse
your Xperia sog01 is from Japan.. which Rom you were trying to flash in it?

Categories

Resources