my friend phone stuck at bootlop problem , now he flash a bootloader file called " G900A_OA1_Bootloader.md5 "
after that the phone shows a computer logo next to yellow triangle i even tried to flash it with ( G900AUCU1ANCE ) the phone shows red message :
SYS REV CHECK FAIL ,,,etc
waiting your help , thanks in advance
rdewa said:
my friend phone stuck at bootlop problem , now he flash a bootloader file called " G900A_OA1_Bootloader.md5 "
after that the phone shows a computer logo next to yellow triangle i even tried to flash it with ( G900AUCU1ANCE ) the phone shows red message :
SYS REV CHECK FAIL ,,,etc
waiting your help , thanks in advance
Click to expand...
Click to collapse
Need more info about the phone. "Version" maybe
the phone doesnt boot at the moment i only can see the info in Download mode is it helpful ??
Check around and see if you can find the original boot loader in odin. It's best to avoid flashing bootloaders if possible as it's risky.
Sent from my SAMSUNG-SM-G900A using Tapatalk
unixasaurusrex said:
Check around and see if you can find the original boot loader in odin. It's best to avoid flashing bootloaders if possible as it's risky.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
any ideas how to find the original bootloader ??
Try this
rdewa said:
any ideas how to find the original bootloader ??
Click to expand...
Click to collapse
Try this
forum.xda-developers.com/showthread.php?t=2785185
Related
hi, i have tried und open my bootloader with 1clicktool ... failed, later i tried to flash a new rom and now i have the boot screen KG logo and Security Error, Error !!! morningcall is empty
can someone pls help me ? thx
galdeano said:
hi, i have tried und open my bootloader with 1clicktool ... failed, later i tried to flash a new rom and now i have the boot screen KG logo and Security Error, Error !!! morningcall is empty
can someone pls help me ? thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2069723
Always use search before posting.:good:
sPEADy said:
http://forum.xda-developers.com/showthread.php?t=2069723
Always use search before posting.:good:
Click to expand...
Click to collapse
ok thx, i have seen this link before.
i am not able to get this S/W mode ... so i have no connection with phone and LG flash tool
Hi,
My phone boots until the Motorola Logo (M in a red point) but doesn't do anything else. And every 5 minutes, it restarts and stops at the same place. No animation, just stops like that, a rock with a red point ...
My phone is a Motorola Razr I, updated with the last version of android, no unlock, no root, 8months old, just a lambda user, never tried to root or unlock ... I did nothing before it crashed, it was in my pocket, no wifi ... it stopped alone and on restart, the Red Point of Motorola of Death is back ...
I can start the fastboot menu, but only "Shutdown" works. "Normal Powerup", "Recovery", "BP Tool" or "Factory" write the same log :
Booting with [...]
Failed to lock fuse, code = 0xa0b23d
Failed to lock fuse, code = 0xa0b23c
Fuse read failed bank = 4 SEP_RETURN = 0xa0b23c
Fuse read failed bank = 4 SEP_RETURN = 0xa0b23c
Click to expand...
Click to collapse
I searched on Xda or with my friend Google, but nothing works because every indicated solution is used with a working recovery mode ...
Did you already meet this kind of problem ? Is it a hard brick ? Can I use my phone like a doorblocker ?
Thanks for your incoming help
LanceOmelette
PS :sorry for my english ... (swiss-french inside ...)
PPS : need more informations ? It will be a pleasure to give them ... if I know how to find it (android noob inside)
PPPS : I hope, I was clear in my description ...
LanceOmelette said:
Hi,
My phone boots until the Motorola Logo (M in a red point) but doesn't do anything else. And every 5 minutes, it restarts and stops at the same place. No animation, just stops like that, a rock with a red point ...
My phone is a Motorola Razr I, updated with the last version of android, no unlock, no root, 8months old, just a lambda user, never tried to root or unlock ... I did nothing before it crashed, it was in my pocket, no wifi ... it stopped alone and on restart, the Red Point of Motorola of Death is back ...
I can start the fastboot menu, but only "Shutdown" works. "Normal Powerup", "Recovery", "BP Tool" or "Factory" write the same log :
I searched on Xda or with my friend Google, but nothing works because every indicated solution is used with a working recovery mode ...
Did you already meet this kind of problem ? Is it a hard brick ? Can I use my phone like a doorblocker ?
Thanks for your incoming help
LanceOmelette
PS :sorry for my english ... (swiss-french inside ...)
PPS : need more informations ? It will be a pleasure to give them ... if I know how to find it (android noob inside)
PPPS : I hope, I was clear in my description ...
Click to expand...
Click to collapse
I would try reflashing the original firmware using Motorola's RSD Lite Flash Tool
if you are still on warranty send it back to the seller
totex71 said:
I would try reflashing the original firmware using Motorola's RSD Lite Flash Tool
Click to expand...
Click to collapse
Thanks Totex.I tried : the log is :
Getvar max-download-size
Downloading ...
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
Fastboot command failed
Click to expand...
Click to collapse
and in RSD Lite :
Status : Failed flashing process 1/11 flash gpt "gp_signed" -> phone return FAIL
Click to expand...
Click to collapse
mmmmmh I presume it's bad ... very bad ... :crying:
Thanks ICuaI, I keep a small hope to not use this last advice
LanceOmelette said:
Thanks Totex.I tried : the log is :
and in RSD Lite :
mmmmmh I presume it's bad ... very bad ... :crying:
Thanks ICuaI, I keep a small hope to not use this last advice
Click to expand...
Click to collapse
Is there ICS or JB on it? and did you try to flash ics?. if so, try the latest jelly bean firmware
Which firmware did you try to flash? I think you need this one:
http://sbfdownload.droid-developers.org/smi/CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip
It is retail eu jelly bean
via RazR I & Tapatalk 4
Thanks
but no ...
It didn't work ... now, it failed on step 2
Log on phone :
Getvar max-download-size
Downloading ...
Flashing gpt ...
OEM fb_mode_set
Fastboot command failed
Click to expand...
Click to collapse
which version of RSD-Lite do you use? What did you try?
Come on, tell us a little bit more. With "No it does not work" we cannot help you.
Ok ... sorry ... I will try to do my best :
RSD Lite 6.0 / Windows 8 / I presume Jelly Bean was my last version on my phone because I checked 1 day before for any update.
The informations on fastboot flash mode :
AP Fastboot Flash Mode (secure boot)
20.25 (sha - [...])
IFWI Info: 42.26
eMMC Info: Size 8GB
Barcode: [...]
Battery (Okay): 3.5v (temp 29.0)
Connect USB Data Cable
ROM-Key: Motorola-Key
Modem Status: Secure
Click to expand...
Click to collapse
I tried to flash my phone with the firmwire you gave me
Connect my phone on RSDLite with USB, Select the xml file and start the process. That stopped after few seconds on step 2
All others exemples found on Google to rescue my phone used the recovery mode or an other option given by the fastboot mode : the probem is every option in the fastboot mode (except Power Off) crashes my phone. So I didn't do lot of things finally ...
Can I give you more informations ?
LanceOmelette said:
Ok ... sorry ... I will try to do my best :
RSD Lite 6.0 / Windows 8 / I presume Jelly Bean was my last version on my phone because I checked 1 day before for any update.
The informations on fastboot flash mode :
I tried to flash my phone with the firmwire you gave me
Connect my phone on RSDLite with USB, Select the xml file and start the process. That stopped after few seconds on step 2
All others exemples found on Google to rescue my phone used the recovery mode or an other option given by the fastboot mode : the probem is every option in the fastboot mode (except Power Off) crashes my phone. So I didn't do lot of things finally ...
Can I give you more informations ?
Click to expand...
Click to collapse
Here's your problem. You need RSD 6.14. Other versions are too old to recognize the new Moto phones.
tatazeuz said:
Here's your problem. You need RSD 6.14. Other versions are too old to recognize the new Moto phones.
Click to expand...
Click to collapse
I just tried with RSD 6.1.4 and 6.1.5, same error : OEM fb_mode_set / Fastboot command failed.
I will go to my seller this afternoon and try to use my warrant.
Thanks for your help :-/
LanceOmelette said:
I just tried with RSD 6.1.4 and 6.1.5, same error : OEM fb_mode_set / Fastboot command failed.
I will go to my seller this afternoon and try to use my warrant.
Thanks for your help :-/
Click to expand...
Click to collapse
Go to the xml and delete the command that fails, in this case OEM fb_mode_set
It was an idea I found too but I didn't know the utility of this line and I didn't want to have a brocken version ...
But now my phone is in the hand of my seller ... I can only pray to have it as soon as possible ...
Thank you everybody for your help It was a pleasure to ask you a question The answers were fast and understable for me
I will give you the result of the investigation of my seller (2weeks to 1month) if I don't forget ...
LanceOmelette said:
It was an idea I found too but I didn't know the utility of this line and I didn't want to have a brocken version ...
But now my phone is in the hand of my seller ... I can only pray to have it as soon as possible ...
Thank you everybody for your help It was a pleasure to ask you a question The answers were fast and understable for me
I will give you the result of the investigation of my seller (2weeks to 1month) if I don't forget ...
Click to expand...
Click to collapse
I deleted fb_mode and it all flashes like it should. I think it just sets it up on fastboot or smth like that
Sorry for the delay, I'm on a trip around the world and I just received my phone back from the seller. But like I thought : no discussion, no message to give the reason or the solution. My phone is back, they made a big hardreset.
Thank you, everybody for your help. I learn some new things
Bye
Lance
After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!
arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s
SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?
Power and vol-, not+
Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.
i was trying to get to get to stock rom
my update utitlity stoped while on system step
and all i have now is a black screen with HTC sign and 4 triangles on each corner
if i removed usb all i get is bootloader with no option and only ruu in red and system was trying to install in red also
would pls help me ?
i tried those ruu
RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651.10
4_06_651_4
1_29_651_10
pls help me
Are you running the RUU.exe or the RUU.zip?
If it's the exe the will be an option to recover popup when it fails.
Exe
Sir
Torayem said:
Exe
Sir
Click to expand...
Click to collapse
You should get an option to recover when it fails.
I do get the recover option and I recover and try again and again , with no success
Now I am on that HTC screen with 4 triangles at the corners.
Or in boot loader but only option in the list is RUU
how I can I get normal boot loader again ?
Is there a problem with my partitions , because both roms are giving the same errors at the same stage
Pls help
Torayem said:
I do get the recover option and I recover and try again and again , with no success
Now I am on that HTC screen with 4 triangles at the corners.
Or in boot loader but only option in the list is RUU
how I can I get normal boot loader again ?
Is there a problem with my partitions , because both roms are giving the same errors at the same stage
Click to expand...
Click to collapse
Try flashing the Full Firmware that matches the RUU that you are trying to use.
I only use exe for the firmware I flash
I flash firmware via fastboot before run the ruu
hi guys
so its my first time with an android phone
i root my device , after it i tried to get an update to my device .
i tried to relock my device when TWRP is installed
after it i got message who say " enter android password to countino " somthing like this ..
i tried many password after it i got message that the phone will be wiped .
it tried to wiped after it i got message " Decryption Unsuccsesfull "
i have only one button who said " restore "
and it dont do anything
just stay my phone with black screen (more then 5 hours)
i cant flash / sideload anything because i cant reach to recovery /fastboot mod
somthing have a smart idea for me ?
You shouldn't try to re-lock phone when you're not using the factory recovery, that won't work. Worst case, you'll have to use the qualcomm restore method to get back if phone is somehow locked even though you have flashed TWRP.
pitrus- said:
You shouldn't try to re-lock phone when you're not using the factory recovery, that won't work. Worst case, you'll have to use the qualcomm restore method to get back if phone is somehow locked even though you have flashed TWRP.
Click to expand...
Click to collapse
yes i know what is my mistake .. i shouldnt play with all of this
and sorry i dont understand in this case
what is qualcomm restore method ?
Unbrick Tool.
ty
dreinulldrei said:
Unbrick Tool.
Click to expand...
Click to collapse
yeah fix it
thanks verymuch