Database Develop

Galaxy S Camera Problem

I recently updated my Galaxy S to v2.2 (JPH firmware) using Kies. I also rooted my phone using the relevant file and applied One-Click Lagfix V2.2.
I was very happy with it, except I tried using my device's main camera today and it doesn't work properly any more. Prior to the FW update, it worked just fine.
Now, each time I take a picture, the camera app appears to be working -- I can focus and so forth -- but once I press the shutter button, it seems to be processing and then I get a broken picture icon in the middle of the screen.
Unlike others in this forum, I don't get a "camera failed" message at all, just the broken icon.
I've read various posts on different forums as well as this one and have tried the following:
uninstalled OCLF,
switching from SD card to phone memory
re-flashing camera firmware
I'm not absolutely certain but I don't think it's the Camera apk because I tried taking a shot with the front camera and it works fine.
Has anyone else encountered this issue? If so, what steps did you take to solve your problem?

i have the same problem as u too. and i am trying to find a way to fix it

here's mine problem
used to work with
CAMERA FIRMWARE INFO:
SESBDI07: OQLBDI13: NONE
but only the devil knows why I did this
- Camera FW update :
* *#34971539#
* Select "Phone to CAM FW Write" and "YES"
* Waiting for "firmware update success.
Click to expand...
Click to collapse
and I got this
SESBDI07; SESBDI07; NONE (after update with XWJS7)
and finally my camera doesn't work @ all
any help appreciated

Try this:
*#197328640#
Then 6 and Factory test, reflash a stock rom, reflash the cam frimware, reboot and test.

ttf said:
Try this:
*#197328640#
Then 6 and Factory test, reflash a stock rom, reflash the cam frimware, reboot and test.
Click to expand...
Click to collapse
I'm in Factory Test but nothing 'bout camera
There are 9 numbers starting 1.VBATT; 2.RTC etc ... 9. TOTAL CALL TIME

Vanto said:
I'm in Factory Test but nothing 'bout camera
There are 9 numbers starting 1.VBATT; 2.RTC etc ... 9. TOTAL CALL TIME
Click to expand...
Click to collapse
My camera bad yet.and update faild. why?

[Q] Camera not working, other solutions?

So my camera force close every time I try to use it..
So far I've tried different roms... like miui, cm7(used cm roms for a while), I've tried pure something roms, blandroid.. camera never worked.. tried one or two kernels too to no avail..
So I've reflashed everything to stock.. I mean STOCK lol.. still force closing..
anything else I might not know to try? Or I can assume it's an hardware issue?
I guess the reps at mobile store will throw a fit once they see the unlocked padlock lol if I ask for some help..

mmm.. i am having the same prob here....
i thought it is because of the ROM...mmm. i have changed to basically All the latest ROMs....failed to make the camera working.
MAYBE it is a hardware issue. My N1 fell from my bed. few times. Im not so sure it was before or after.

FOUND the solution to Camera Not working Nexus One.
You have to go back to Stock ROM
http://forum.xda-developers.com/showthread.php?t=717870&highlight=frf91
1. Go back to Stock RoM
2. Then flash back to your FAV ROM - Mine is Miui AU..

not really the solution....
after 24 hours of working hard..
i failed!
Camera WORKING - when using stock ROM
Camera NOT working - when rooted and custom ROM.
What should i do ?

sadly I've already tried going back to stock.. did not work.. got some suggestions on another forum to try an clear the thumbnails and camera cache..
The Camera cache is stored under sdcard/android/data/com.cooliris.media...
Thumbnails are under sdcard/DCIM/thumbnails...

I had this issue within a month of upgrading to 2.2.3 on a stock Nexus One, and the fix for me was to re-format my SD card. I copied everything off to a PC, formatted and copied everything back and now the camera is working as intended. Hope this helps!

DexNarfux said:
I had this issue within a month of upgrading to 2.2.3 on a stock Nexus One, and the fix for me was to re-format my SD card. I copied everything off to a PC, formatted and copied everything back and now the camera is working as intended. Hope this helps!
Click to expand...
Click to collapse
i tried already....not working...
i changed the Card, it works..!!
and it does nt again...

What radio you on? Try radio 5.0.8 if you're not already on it

Same problem here after flashing CM7 kernel on stock ROM. Did you fix it? Please help.

Did someone solve this problem? I have the same since yesterday (?!?) when i made the 2.3.4 update....
Maybe this problem is older in my n1, but i cant exactly say. I tried starting the camera app when sd-card is unmounted -> no effect, force close....

Actually... had a friend have the same issue. Though... it may or may not be the same as your issue. Brought it to an after service center near us and they cracked it open. They said there was a cable loose inside going to the board with the camera on it that was causing the issue. They put it back together and it has been working fine ever since. I am not exactly sure how a cable was loose inside where it shouldn't ever be moving... but it definitely fixed the problem. Hopefully you guys don't have the same problem.
Prior to going to the service center I backed up and flashed back to stock. Still had the same problem... though I seem to remember the message being odd when trying to use the camera. Was a while back so... >_< sorry.

Hm, i got this error in logcat:
V/CameraHolder( 1122): open camera 0
E/mm-camera( 75): main: MSM_CAM_IOCTL_REGISTER_PMEM ioctl failed for MSM_PMEM_AF type. ioctl return value is -1
E/mm-camera( 75): isp3a_init_ctrl failed
Click to expand...
Click to collapse
Does someone can give me hints?

Ok, i get interesting information within my tests:
camera is ok! works with CM7 and this ROM: http://forum.xda-developers.com/showthread.php?t=1061648
But why not with my stock ROM?
I updated hboot/radio for a test -> No camera
Changed kernel (CM-Kernel, etc.) -> No camera
What else is the problem? I actually love my system and when i flash stock GRJ22 over it, camera works, but alle sd-apps are not avaiable and the memory ist nearly full.

Moto JB 4.1.2 with a heavy touch of AOSP Camera issue

Anyone else have the problem that no camera app (stock or aftermarket) works with this rom? Every time it says (fails to initialize, or no connection to the camera (just in german on my phone) Is there a solution, I wiped everything I could but the error still occurs.
Greets
Martin

Have a look in the corresponding thread. It is a known issue and has been fixed in the latest release from later today.

Front Camera not working

Hey,
I own XT1068 device, currently running Minimal OS 3.0 ROM. Today, I noticed that my front camera is not working. I don't know when it stopped working but came to my notice only today. In stock camera app, if I change to front camera, I get an error message stating "Can't Connect to Camera". Tried different apps but either get the error message or the app force closes. I have even tried changing ROMs but all in vain. I feel it must be a hardware issue.
Any experience or troubleshooting tips?
Thanks.

Go to service center and get it replaced/repaired

http://expirebox.com/download/a343b6cb5d5092bdbe7846ac1d77290b.html flash this via twrp
Hit thanks if it helped
Sent from my XT1068 using Tapatalk

Have u tried by flashing stock firmware?

I had this same problem a few months back while using Blisspop. I guess there were some conflicts (I suppose) so I Factory reset first (including internal storage) and flashed Tesla. Problem got fixed. Reflashed Blisspop to check and never had the problem again.
So my solution is factory reset and try and flash another ROM.

All my sensors stopped working at the same time!!

The situation is this, i try to change my phone to efs partition, i changed and after some weeks i decided get back to ext4, but during this procedure, the partitiol table got corrupted/broken, so everytime i flashed a rom it was good but on recovery, the data partition shows an error on log, when it booted, i noticed that my sensors stopped working, rotation screen brightness controller, among others, i had no other option than restore to stock, and i did, but my sensors keep not working, and i already flash the 5.0 and 6.0.1 and the result is the same, isnt suppost a rom include the sensor drivers?
Im 100% sure it isnt a hardware problem, please if anyone could help me i would be very gratefull, thanks