Hello all ....which costum rom gives good battery backup please tell me
You could try CyanogenMod or using greenify on stock rom
I flashed KitKat stock rom ...bt after flashed....google play store stopped working again and again.....pls gv me any one original official KitKat thnx in advance....
ASHU9668 said:
I flashed KitKat stock rom ...bt after flashed....google play store stopped working again and again.....pls gv me any one original official KitKat thnx in advance....
Click to expand...
Click to collapse
I had similar problems after flashing KPW53 Stock kitkat ROM. Try booting into recovery and flash gapps for kitkat.
Don't forget to wipe dalvik.
Pls gv me the link of gapp for KitKat..
Pls anyone gv me the official KitKat stock rom.....with no bugs
ASHU9668 said:
Pls gv me the link of gapp for KitKat..
Click to expand...
Click to collapse
Hi buddy, you can download gapps from below link:
http://opengapps.org/
Hit thanks if this was useful
Related
I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
ReaLioR said:
I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
Click to expand...
Click to collapse
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
arffrhn said:
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
Click to expand...
Click to collapse
Yes my phone is rooted
and i used CWM ...
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
oh i didnt saw this thread :silly:
thank you very much !
PROBLEM SOLVED
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
ReaLioR said:
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
Click to expand...
Click to collapse
About that, I can't help you cause I've never tried PA. Maybe someone else can answer this for you.
Guys I flashed a new row, made all wipes and put CM 10.1 w/ Gapps for 4.2. I don't liked the rom so I flashed it again and now I have a big problem.. the gyroscope isn't calibrating, play store isn't working and the process gapps is stopping working every time. I flashed gapps for 4.1 and the problem persists. Made all wipes, flashed again, did all the things I found in google and nothing.. Please help me!
Rom: Italia LQG
HugoGarcia said:
Guys I flashed a new row, made all wipes and put CM 10.1 w/ Gapps for 4.2. I don't liked the rom so I flashed it again and now I have a big problem.. the gyroscope isn't calibrating, play store isn't working and the process gapps is stopping working every time. I flashed gapps for 4.1 and the problem persists. Made all wipes, flashed again, did all the things I found in google and nothing.. Please help me!
Rom: Italia LQG
Click to expand...
Click to collapse
Just restore your backup, I guess you did one before testing CM.
rodaven said:
Just restore your backup, I guess you did one before testing CM.
Click to expand...
Click to collapse
Ham.. nope
Ook I fixed that problem, now theres another problem: the horizontal calibration doesn't work! Please don't tell me that a have to reflash the rom again
You must downgrade to GingerBread to recalibrate. Jelly Bean don't have this feature.
Powered by CM10.1
R_a_z_v_a_n said:
You must downgrade to GingerBread to recalibrate. Jelly Bean don't have this feature.
Powered by CM10.1
Click to expand...
Click to collapse
Seriously? That's the only way?
Yep. I have this issue and search a lot for alternative solution without results.
I downgraded, recalibrate and after that upgrade to Jelly Bean and the rest...
Powered by CM10.1
R_a_z_v_a_n said:
Yep. I have this issue and search a lot for alternative solution without results.
I downgraded, recalibrate and after that upgrade to Jelly Bean and the rest...
Powered by CM10.1
Click to expand...
Click to collapse
When I downgrade to GB I will lose all my apps and data from internal storage?
Yep.
But make a backup with Titanium and/or other app like and will be fine.
Or, if you have a Nandroid Backup, after downgrade GB and upgrade JB you can restore it.
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
heartbrake said:
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
Click to expand...
Click to collapse
Look for cm10.1, you can install it from stock recovery and no need to root before.
Sent from my GT-I9070 using Tapatalk
heartbrake said:
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
Click to expand...
Click to collapse
try the cm10.2 or cm10.1 by team canjica.
they are super fast..
you can find more info on how to install it in the rom thread..
good luck..
dagger said:
try the cm10.2 or cm10.1 by team canjica.
they are super fast..
you can find more info on how to install it in the rom thread..
good luck..
Click to expand...
Click to collapse
thanks..should i install 10.1 or 10.2 ? i am confused..which one has few bugs and do i need specific stock rom version or any stock rom would work..i have 4.1.2 ddulp8
heartbrake said:
thanks..should i install 10.1 or 10.2 ? i am confused..which one has few bugs and do i need specific stock rom version or any stock rom would work..i have 4.1.2 ddulp8
Click to expand...
Click to collapse
try the latest version of cm10.1..
it's a bit better..
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
This is link for latest. You will need to change some thing in build.prop to make red border dissapear. Some red border show up sometimes.
Solution: http://forum.xda-developers.com/showthread.php?p=48460020&highlight=red+border#post48460020
shut_down said:
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
This is link for latest. You will need to change some thing in build.prop to make red border dissapear. Some red border show up sometimes.
Solution: http://forum.xda-developers.com/showthread.php?p=48460020&highlight=red+border#post48460020
Click to expand...
Click to collapse
thanks man..but it is written beta in 10.1 and in 10.2 team canjica it is written as stable..sorry for all these questions, i am new to this..can u also paste the link for google apps latest version that is compatible with these roms..thanks again
heartbrake said:
thanks man..but it is written beta in 10.1 and in 10.2 team canjica it is written as stable..sorry for all these questions, i am new to this..
Click to expand...
Click to collapse
Threads are not updated.
I use 10.1 for some time, I think it is fastest ROM we have. I am not sure if WIFI direct is working, but I am not using it anyway.
shut_down said:
Threads are not updated.
I use 10.1 for some time, I think it is fastest ROM we have. I am not sure if WIFI direct is working, but I am not using it anyway.
Click to expand...
Click to collapse
okay ..can u please post the google apps link..that is compatible with this rom..
heartbrake said:
okay ..can u please post the google apps link..that is compatible with this rom..
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23060877490000128
http://goo.im/gapps/gapps-jb-20130812-signed.zip
Both links are for same gapps. I posted in case if some do not work.
CM 10.2 is better than 10.1. Don't try Omni.
jihaad said:
CM 10.2 is better than 10.1. Don't try Omni.
Click to expand...
Click to collapse
thanks man..i am using cm 10.1 currently and no lag.. i love it..if u say so, i will try cm10.2 ..this is the link for the latest version right? http://goo.im/devs/diegoch/janice/cm-10.2/cm-10.2-20131025-UNOFFICIAL-janice.zip
heartbrake said:
thanks man..i am using cm 10.1 currently and no lag.. i love it..if u say so, i will try cm10.2 ..this is the link for the latest version right? http://goo.im/devs/diegoch/janice/cm-10.2/cm-10.2-20131025-UNOFFICIAL-janice.zip
Click to expand...
Click to collapse
No, it's old. Latest version: http://d-h.st/UVl
jihaad said:
No, it's old. Latest version: http://d-h.st/UVl
Click to expand...
Click to collapse
I had ear phone problem with cm 10.1. On incoming calls earphn volume was very low nd I had to increase it every tym manually. Is it rectified in cm 10.2?
Sent from my GT-I9070 using xda app-developers app
I installed 10.1
much better then Samsung 4.1.2
mannulko said:
I had ear phone problem with cm 10.1. On incoming calls earphn volume was very low nd I had to increase it every tym manually. Is it rectified in cm 10.2?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
This issue has already been fixed in latest cm10.1 and cm 10.2 if flashed over ddulp8 indian stock rom.
so which rom has the more fixes cm10.1 or 10.2?
Fixes like nfc/omx/RIL/wifi/blutooth
i have tried to flash gapps for 4.4.3, bt still not work
pls help
thanks
williamlaw said:
i have tried to flash gapps for 4.4.3, bt still not work
pls help
thanks
Click to expand...
Click to collapse
I will assume you flash CM 4.4.3, did you do a clean install? how did you do the flash?
jpisini said:
I will assume you flash CM 4.4.3, did you do a clean install? how did you do the flash?
Click to expand...
Click to collapse
Dirty update from 4.4.2 only
Should I do a clean flash ?? Since many things need to set again.
Thanks
williamlaw said:
Dirty update from 4.4.2 only
Should I do a clean flash ?? Since many things need to set again.
Thanks
Click to expand...
Click to collapse
Make a backup and try the clean flash it can't hurt.
I have a vs980 ( rooted ) on 39A bootstack. I'm on stock rom on 5.0.2 lollipop.
I have twrp installed from the app "Auto Rec" and would like to know if I can upgrade to android 5.1.1 and use a custom rom? I had issues with installing slim LP using the 5.0.2 version and it gave me a binary error of some kind. I'd really like to know if there is any possible way to get off of stock rom thanks for the help if anyone helps me!
Any help me??
Dylan064 said:
I have a vs980 ( rooted ) on 39A bootstack. I'm on stock rom on 5.0.2 lollipop.
I have twrp installed from the app "Auto Rec" and would like to know if I can upgrade to android 5.1.1 and use a custom rom? I had issues with installing slim LP using the 5.0.2 version and it gave me a binary error of some kind. I'd really like to know if there is any possible way to get off of stock rom thanks for the help if anyone helps me!
Click to expand...
Click to collapse
I flashed a cm vs980 debloted rom and phone went to 5.1.1.. cm12 116015????
worked fine just didnt want to deal with gapps
David W Taylor said:
I flashed a cm vs980 debloted rom and phone went to 5.1.1.. cm12 116015????
worked fine just didnt want to deal with gapps
Click to expand...
Click to collapse
Can you link me to the one you used? Thanks man.