Im using nook hd+ with latest cm12.1
When i shut down my nook, it automatically restarts
After like 5 seconds.
Please help me how can i turn off my nook??
Do you have power connected? I'm not sure, but I think the hardware forces a power-on when power is connected.
No the power is not connected
This issue has been discussed at length in #Amaces's thread where this ROM is located.
Have you looked there?
FirePsych said:
This issue has been discussed at length in #Amaces's thread where this ROM is located.
Have you looked there?
Click to expand...
Click to collapse
Thanks. this thread helped a lot.
It seems like this issue has been fixed in latest 08/03 version of CM12.1.
I will try installing this version today.
Thanks.
Does anyone know how I can fully wipe my current CM 12.1 and install new-latest CM12.1 safely?
Is this safe way to do this ?
- insert sd card and reboot in recovery mode
- wipe data / factory reset
- wipe cache partition
- install zip files(recovery/cm12.1/gapps)
- wipe dalvik cache
- reboot
Is this safe way to install cm12.1 - 0803 from my current cm12.1 - 0723??
Thank you
I would reboot after flashing recovery.
Reboot after flashing ROM. Set up the basics. Make a back-up. Flash GAPPS, log into your Google account and set up the basics. Make another back-up , wipe cache/ dalvik,, reboot, and then finish setting up your device.
I think you might want to wipe system to and look into converting Cache and Data to F2FS.
Also, I typically wipe everything 3 times when switching ROMs.
Sent from my XT1060 using Tapatalk
I installed cm12.1 0803 version but i am still having this problem ......
FirePsych said:
I would reboot after flashing recovery.
Reboot after flashing ROM. Set up the basics. Make a back-up. Flash GAPPS, log into your Google account and set up the basics. Make another back-up , wipe cache/ dalvik,, reboot, and then finish setting up your device.
I think you might want to wipe system to and look into converting Cache and Data to F2FS.
Also, I typically wipe everything 3 times when switching ROMs.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
Dear sir,
Thank you for your information at my thread.
I am currently running cm 12.1 0803 version with the same auto-restarting problem.
(the shut down functions works sometimes when i shut my nook in landscape mode)
However, I also found out that my Bluetooth mouse is not compatible with CM 12.1 and
I am planning to install cm11 version(because i heard that my mouse works in cm11 version fine).
And i would like to ask you these(I hope you will be kind enough to answer them) :
1. is there a way to make my bluetooth mouse work in CM 12.1 version?
2. which version(date) of cm11 will you recommend me?
3. you mentioned about changing cache and data to fsf2, can you tell me how i can do this? what would be the advantage?
4. you mentioned about wiping everything 3 times, do you wipe 3 times with only booting once? or do you reboot everytime you wipe?
5. Please tell me if this procedure is correct, if i will change my cm 12 to cm 11
- insert sd card and reboot in recovery mode
- wipe data / factory reset
- wipe cache partition
- install recovery and reboot
- install cm rom and reboot
- install gapps and reboot
- format/system(3times?)
- format/data(3times?)
- format/cache(3times?)
- format/bootdata (3times?)
- format/data and sd card (3times?)
- wipe dalvik/cache
- reboot
Thank you.
tnckd13 said:
Dear sir,
Thank you for your information at my thread.
I am currently running cm 12.1 0803 version with the same auto-restarting problem.
(the shut down functions works sometimes when i shut my nook in landscape mode)
However, I also found out that my Bluetooth mouse is not compatible with CM 12.1 and
I am planning to install cm11 version(because i heard that my mouse works in cm11 version fine).
And i would like to ask you these(I hope you will be kind enough to answer them) :
1. is there a way to make my bluetooth mouse work in CM 12.1 version?
2. which version(date) of cm11 will you recommend me?
3. you mentioned about changing cache and data to fsf2, can you tell me how i can do this? what would be the advantage?
4. you mentioned about wiping everything 3 times, do you wipe 3 times with only booting once? or do you reboot everytime you wipe?
5. Please tell me if this procedure is correct, if i will change my cm 12 to cm 11
- insert sd card and reboot in recovery mode
- wipe data / factory reset
- wipe cache partition
- install recovery and reboot
- install cm rom and reboot
- install gapps and reboot
- format/system(3times?)
- format/data(3times?)
- format/cache(3times?)
- format/bootdata (3times?)
- format/data and sd card (3times?)
- wipe dalvik/cache
- reboot
Thank you.
Click to expand...
Click to collapse
1) Shut down and boot into recovery isn't working for me on 8/03 either, but I haven't had time to mess with it to find out why not. Maybe wiping system and then flashing 8/03 might work. I wouldn't wipe Data if you're coming from the last July version of 12.1
But, if you hold down the power button long enough, the tablet will shut down. I just can't shut down from the menu.
Once you're completely off, you can boot into recovery with the power/n combo.
I also tried the Reboot shortcut and widget from ROMToolbox Pro and that didn't work either.
1) I don't know much about how to make bluetooth work. I know that some stuff works on these builds and some stuff doesn't
2) I'm using Amaces's Unofficial CM 12.1. I never found a CM 11 that worked well on my Nook HD+
3) Theoretically,F2FS uses flash memory more efficiently. I think we're talking nano or micro seconds here, but many say it helps. To answer your question about Why and How, I'd have to look it up to give you clear instructions. You can do the same, and you'll learn more by researching it yourself, than by me explaining it poorly.
3) I wipe three times, then reboot
------NOTE---
I'm barely above a novice and my advice isn't worth diddly squat
Below is what generally has worked for ME and what I've read that other folks do. It does not mean this is the best way to do it.
The MOST important thing is to read a lot, then read some more, take your time and make back-ups often.
You need to look in the CM11 threads to see what Recoveries are compatible with CM11. Not all of the current Recoveries are backwards compatible.
AND you're better of asking about flashing to CM11 in a CM11 thread, rather than a CM12 thread.
I don't use an SD, I do everything off of the onboard memory.
I use TWRP as my recovery.
1) If I'm going to a new ROM, rather than do Factory Data Reset, I manually go in and choose to wipe System, Dalvik, Data and Cache. I've never touched BootData as far as I remember. I do that 3 times.
2) Flash new recovery if you want.
3) Reboot into recovery too make sure the new recovery flashed okay.
4) I then flash the ROM, wipe Dalvik and Cache 1 time, boot into the ROM to make sure it was a good flash and set up the bare minimum.
5) Boot to recovery
6) Flash GAPPS and wipe Dalvik and Cache 1 time (usually)
7) Reboot and make sure there were no problems with GAPPS
8) Set up my minimum accounts and apps.
9) Boot to recovery and make a back up.
10) Reboot and install the rest of my apps.
11) Make sure everything works okay and once I'm satisfied, make another back up.
If I'm going from one version of the same ROM to the next update, I just flash the latest version, wipe Dalvik and Cache 1 or 2 times and reboot.
Thereafter, I make back-ups ever week or so, depending on how much I've been using my tablet and how much time I have.
Related
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
ablack01 said:
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
Click to expand...
Click to collapse
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Best and most reliable way to do this is flashing through stock rom via Odin. Then flashing kernel with CWM Recovery via Odin. And only then flash CM9 via CWM.
thanks for the quick reply guys. will try it out tonight and update this post. hope all goes well.
cheers!
bmwchampz said:
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Click to expand...
Click to collapse
and if u want u can try chimera rom from team passion.. it s combination of cm9 and AOKP.. It s stable and fast..
took me less than 10 minutes to flash to cm9 and it's as snappy as i thought it was. now to fix up everything and check if everything's okay.
so far, wifi and network signal are working fine and dandy. might just have a go at that chimera rom.
Hi all, My i9000 has exhibited some rather scary behavior as my phone booted up automatically when I shut it off and I didn't press the power button to turn it on! I was on the CM10,1 Eleventh of Jan nightly.The phone boots up normally, but after roughly 3 minutes of idle the phone bootloops/gets into recovery. A full data, cache and dalvik wipe does nothing to solve this, nor does re-installing the CM10.1 build, Gapps and Sempahore kernel (tried it w/ and w/o semaphore). Tried the 12th/13th Jan ones but they do not work either.
I am able to get the phone into download mode, but my computer is unable to detect the phone via ODIN. However, mounting USB storage in recovery mode works fine, I can see my entire SD card in there. Should I flash a new rom over it? Or should I try to restore the connection with ODIN and go back to Gingerbread (I do not precisely know how to do this though, I've tried different cables and different USB ports with my PC).
Thanks for all the help in advance.
So can you flash a Rom through Odin?
Can you enter CWM? If so you could also flash CM 10 for example and look if its happening again. Install it like this: Wipe Data/Factory Reset, Wipe Cache, Wipe Dalvik Cache under Advanced and Format /system under Mounts and Storage. Then flash CM 10 (maybe with gapps I dont know ^^)
Sent from my GT-I9000 using xda app-developers app
i installed AVATAR 4.2.2 on my optimus 2x. Now after installing that ROM, a lot of applications crash. the battery backup has decreased drastically and sometimes when phone goes to sleep, the power button doesent work in getting the phone off sleep. i have to take off the battery and then start the phone..
I tried installing a ROM based on 4.0 but its not installing now. everytime i install it, i again get the AVATAR ROM
always do a full wipe before flashing a new rom....this is how i do
1. Save all my work from the phone to the computer and al the files that I will need in the future
2. In recovery I go to Mounts and I wipe cache, data, sd card, system, dalvik cache
3. FLash the rom and then in the advanced menu select Fix Permisions
4. Copy back the saved files and data from the computer to the phone
I never had problems when I flashed new roms
hunk from jalandhar said:
i installed AVATAR 4.2.2 on my optimus 2x. Now after installing that ROM, a lot of applications crash. the battery backup has decreased drastically and sometimes when phone goes to sleep, the power button doesent work in getting the phone off sleep. i have to take off the battery and then start the phone..
I tried installing a ROM based on 4.0 but its not installing now. everytime i install it, i again get the AVATAR ROM
Click to expand...
Click to collapse
ilooze said:
always do a full wipe before flashing a new rom....this is how i do
1. Save all my work from the phone to the computer and al the files that I will need in the future
2. In recovery I go to Mounts and I wipe cache, data, sd card, system, dalvik cache
3. FLash the rom and then in the advanced menu select Fix Permisions
4. Copy back the saved files and data from the computer to the phone
I never had problems when I flashed new roms
Click to expand...
Click to collapse
i did a full wipe only, wiped cache, daivik cache and fixed permissions
hunk from jalandhar said:
i installed AVATAR 4.2.2 on my optimus 2x. Now after installing that ROM, a lot of applications crash. the battery backup has decreased drastically and sometimes when phone goes to sleep, the power button doesent work in getting the phone off sleep. i have to take off the battery and then start the phone..
I tried installing a ROM based on 4.0 but its not installing now. everytime i install it, i again get the AVATAR ROM
Click to expand...
Click to collapse
my friend,
wipe cache and dalvik
wipe data
format system
check for the right boot loader version....I have personally tested and used the Avatar 2.11b version from 18th may....check my New Boot Loader Versions thread in the developers section....I had no issues
Try a complete wipe again....and if possible try to format the InternalSD and then re-flash
SREEPRAJAY said:
my friend,
wipe cache and dalvik
wipe data
format system
check for the right boot loader version....I have personally tested and used the Avatar 2.11b version from 18th may....check my New Boot Loader Versions thread in the developers section....I had no issues
Try a complete wipe again....and if possible try to format the InternalSD and then re-flash
Click to expand...
Click to collapse
i read in a few threads that where updating the bootloader solved the issues related to battery.. i am enw to this and am not sure how to change the new bootloader
hunk from jalandhar said:
i read in a few threads that where updating the bootloader solved the issues related to battery.. i am enw to this and am not sure how to change the new bootloader
Click to expand...
Click to collapse
read the thread called AIOT...you will find the link in my signature my friend.....you will have all the answers there....
But, the battery related issues are mostly from LG ICS versions....but, yes Kowalski Kernel sloves quite a few issues of battery drain
Received this phone a month ago, just got around to rooting it yesterday. Root with motochopper went fine. Unlocked the handset with motopocalypse, everything went fine. Installed latest CM10.2 nightly and everything ran fine, even restarted phone and it worked fine. I then realized I forgot to install Gapps, So i went to CWM and installed the Gapps through "install zip from sd card". Now phone will not progress past the bootloader unlocked warning screen. I can restart and put phone into recovery or fastboot no problem but I don't know where to go from here. I tried a factory reset and reinstallation of CM but to no success. I am a bit of a newb when it comes to external programs like RSD Lite and haven't used it. Is there something obvious I'm missing in my progress of trying to fix my phone?
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
i can't post outside links yet but on the wiki.cyanogen site in the Gapps section I used the 10.2 20130813 1f51b5cc6370c1f45dc951109b6ce6ed release. I will attempt those steps once i can find a legitimate charger in my house. Phone doesn't accept power unless its on and i need just a bit of juice to boot it up
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
Here's the official name. Installed cm-10.2-2-130814-NIGHTLY-mb886.zip for the cm and gapps-jb-20130813-signed.zip for the GApps, both latest versions I believe
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
yodelyfish said:
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
Click to expand...
Click to collapse
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
frog1982 said:
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
Click to expand...
Click to collapse
i got Cyanogen up and working. And no I was not flashing gaps Before first boot. i will try doing that before everything else
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
yodelyfish said:
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
Click to expand...
Click to collapse
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.[/Q]
Awesome. Pac-Rom already looks better on review. I get to the dl page tho and have a monster list of choices. Which one do I go for?
Click to expand...
Click to collapse
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
Click to expand...
Click to collapse
Thank you for all the help. PACROM is up and running swimmingly, all of the features are there and it is definitely better than CM by itself. Thanks again
First off, I'm new here despite having visited this site many times before. Glad to be here!
So, I recently flashed CyanogenMod 12.1 to my Moto G (xt1045). It's worked well so far but my only issue is that I can't seem to get Gapps on my phone no matter how many times or ways I've tried. I've wiped the Dalvik cache, done a factory reset, adb side loading...pretty much everything, but to no avail. Any help would be appreciated. Thanks!
Does the developer recommend any gapps? Did you try these: http://opengapps.org/ ?
Flash through TWRP,in the upcoming menu you can chose which apps you´d like to have,which ones should be replaced etc. Wipe Cache/dalvik afterwards.
If you try to flash gapps what happens? Any error message? Just nothing?
Yes, the CyanogenMod site provided several links which I tried originally tried, and I also used your links but with no success. When the phone reboots, right after I swipe the lockscreen to unlock, I get a message that says "Unfortunately, Google Play Services has stopped working.". Sometimes it reappears several more times after I tap 'ok'.
I tried flashing Gapps using my first recovery which is CWM. When none of that worked I flashed TWRP, then restarted the whole process and still nothing. Does it make a difference that CWM was there first? Also, in TWRP I see no option for choosing which Gapps to be installed.
Normally you put the zip file with the Gapps on your SD card and when you push the "install"button in TWRP just scroll down until you find the zip and use the slider to flash them.
I don´t know your rom but often the procedure is to to factory reset and wipe the phone(Dalvik, Data, Cache and System), then flash the rom,wipe dalvik/cache and then let the phone boot one time. Skip all the steps in the setup process until you get to the homescreen,then reboot the phone into recovery again and flash the gapps. After that wipe cache/dalvik again and let the phone boot.
If you flash the gapps directly after the rom without rebooting there can be issues between sytem apps of the rom like for example playstore and playservices and the flashed Gapps.
Cool, I'll try that. I read somewhere to start with a clean slate ROM so I'm downloading CyanogenMod again. When it finishes I'll do what you suggested and report back.