My upgrade to CN 11 failed, stuck in bootloop and now after switching off and powering on,nothing is appearing on the screen. Only 4 circular lines and stucked there.
Any suggestions!!!
Br//
Bijit
Flash stock JB again.
Official Jelly Bean Firmware Installation Guide
Good luck
Related
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Is your phone rooted? Do you have cwm?
Sent from my GT-I9000 using xda app-developers app
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Hmm... Which firmware u flashed?
If my post helped, don't mind hitting THANKS
you have to flash a the JVU. are you sur you didn't flash the JW4 !!
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Firstly I don't think its bricked if you can access download and recovery mode ....
I recently did the following to fix everything wrong with my phone.
I flashed to a stock rom (gingerbread 2.3.3)using Odin, then rooted my phone again. Then I flashed darky's rom (GB 2.3.6). After that i flashed tiramislim 9 (ICS 4.0.4) & that worked out for me. Hope i helped.
Hi everyone,
I am somewhat a Noob to android flashing and I've run into a problem when installing Elite Genius's Jelly Bean ROM which can be found on the following thread:
http://forum.xda-developers.com/showthread.php?t=1776738
After installing the beta 8 version I decided to install the beta 10 version. However after moving the ROM to my internal SD card and installing the ROM through the Devil Kernel the phone is stuck on the semaphore kernel loading screen.
I have tried restarting the phone but the phone keeps getting stuck on the loading screen. Could anyone help me out?
Shano
Try to use the download mod and flash the stock JVU via Odin , then install your rom .
Go back to cwm and reflash the zip do that before you go to stock cause it might fix it
Sent from my GT-I9000 using xda app-developers app
After upgrading to 4.3 via kies i m stuck on boot logo.
When i entered recovery mode there was a fallen android with a red triangle
Factory reseted still the same.
Tried many odin 4.3 roms (stuck at boot logo again)
Flashed a custom recovery twrp which flaggd knox and flashed alliance rom 4.3 (still stuck at boot logo)
Flashed boffela kenerl (still stuck)
Flashed a 4.1 custom rom
It worked but no imei did a efs restore nothing happened
flashed persus kenerl (imei and signals back)
Lastly used 4.1.2 for some time
tried to upgrade to 4.3 again (stucks at boot logo)
flahed twrp some how i cant wipe data and encryptions says unknown file system
Now using 4.1.2 alliance rom 1.3 (Note all stock 4.1.2 roms work but every custom rom like cm,omni rom, miui dont work i.e they stuck at boot logo too and already tried factory reset)
I have 2 questions
what does fallen android with a red triangle in recovery mode mean ?
Also what about the twrp issue?
Any help will be appriciated
Flash stock ROM with Odin.
Wipe the **** in Sammy recovery and it should boot up.
Sent from my GT-I9305 using xda app-developers app
toeterbaas said:
Flash stock ROM with Odin.
Wipe the **** in Sammy recovery and it should boot up.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Did not work but finally got it working
Flashed a 3 part odin frimware of 4.1.2
then tried 4.3 againg didnt work
http://forum.xda-developers.com/showthread.php?t=2023527
Then flashed 4.1.2 again
Flashed latest version of philz recovery
wipe date system .... everything from mount and storage and flashed alliance rom 2.3 which somehow worked
and Flashed 4.3 stock rom via odin which also worked
Hello everyone.
I just got my dad's old Galaxy not n7000. It had android ICS 4.0.3 on it.
I wanted to install a custom rom, so i rooted and installed one, but it got stuck on boot loop, though i followed all steps properly.
I restored back to the stock 4.0.3 using odin. After restoring, the lock screen would not show, nor would it detect my sim card. i couldn't fix it in the phone options. I googled the problem and it told me to check my imei. My phone didn't have one. I decided to try and install another custom rom, but it didn't work, went into bootloop again. I tried another, same thing. So i decided i would just update my phone to the official 4.1.2 update released in UK using odin.
but again went into bootloop. i restored it to 4.0.3 and it worked. However, when i went into recovery while in 4.1.2, a red error showed saying :failed to mount /efs.
Something is seriously wrong and i need help.
Thanks in advance.
Also I should note that, couple of years ago, there was an official update released by samsung, but that too made the phone go into a boot loop. we had to recover it using odin.
Please help me in Installing Android 5.0 Lollipop on Samsung Galaxy GT-S6012.
Any other latest working Version of Android that i can install ??
Am willing to root my phone.
Please help.
And thanks a ton for your help !!!
sunnynanade said:
Please help me in Installing Android 5.0 Lollipop on Samsung Galaxy GT-S6012.
Any other latest working Version of Android that i can install ??
Am willing to root my phone.
Please help.
And thanks a ton for your help !!!
Click to expand...
Click to collapse
Hello. I'm sorry but actually there's no lollipop for our device, however there is cm 11 with kitkat 4.4.4 but it isn't 100% stable. There's also cm 10.1, the android version maybe be a little old but it's more stable.
To flash this roms, you need this CWM
And for rooting, I think the easiest way is using Cydia Impactor
Boot loop..
Hi. I got a Samsung GT-S6012 that keeps rebooting the Samsung logo and doesn't start. At first I got the phone stuck on the very first logo with Samsung model name. So I did some search. Downloaded Odin and latest 4.1.2 official firmware for that phone model flashed it. Everything worked for a few days but then the battery ran out and phone shut down and when I turned it on again it got stuck on the very first logo and nothing. Then I flashed the same firmware again to get it running and when I checked it the flashing didn't really fully wiped the internal memory cause the data in it was still in tact. So I thought I need full wipe to fix the phone. So installed custom recovery, rooted it and flashed CM 10.1 on it. It was running very smooth everything seemed okay but I wanted the stock rom. So I went to recovery wiped whatever was possible and flashed the stock firmware in download mode again. And now I got stuck on the second Samsung logo and it keeps rebooting it self. I recognize that I cannot wipe data/factory reset and wipe cache in now stock recovery cause it gives me android logo within it a red flag. The wipe cache supposed to fix boot loop problem but it's not an option for me anymore. All I can do now is just enter Download mode. I'm downloading 4.0.4 firmware and gonna try to flash that one see if it works but I doubt. Can anyone suggest me a way to fix it? Please I'm really desperate.