i have g925v when i entered to recovery to enable cp logging i didnt find it
please help me
can
来自我的 X9180 上的 Tapatalk
Related
Hi, I hope someone is available right now. I just flashed my G-Flex D950 via LG Flash Tool and left it plugged in, I dont know what made this flash different but it booted into Factory Test/Service Mode. The full SystemUI didn't load, just the status bar. I was able to slip into the settings panel and enable ADB and I am right about to ADB this *****. What else can I do that may be useful, I think I have higher priveleges without rooting.
If you got adb enabled then push the recovery and system IMG if you're not familiar with adb(comfortable ) then use the flash tool again and redownload your kdz or tot file again but this time use a downloader from the market place if you're using your android to diwnload . you may have gotten a bad download as I was till I used a downloader hell try to factory reset from settings if not try booting into recovery via adb or hard keys sequence. Via adb in windows : adb reboot recovery
Sent from my LG-D959 using Xparent Skyblue Tapatalk 2
mattwheat said:
If you got adb enabled then push the recovery and system IMG if you're not familiar with adb(comfortable ) then use the flash tool again and redownload your kdz or tot file again but this time use a downloader from the market place if you're using your android to diwnload . you may have gotten a bad download as I was till I used a downloader hell try to factory reset from settings if not try booting into recovery via adb or hard keys sequence. Via adb in windows : adb reboot recovery
Sent from my LG-D959 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
I think you missed my point. I can get into factory boot mode, meaning RCT is not running and showing that I'm running rooted, I can also turn of AT&T bloatware and a bunch of other nice commands that were left on the device.
Hi guys, I flash nexus 6 factory image on Linux. after that I lock my OEM bootloader. But I accidentally flash the recovery.img(twrp).
It cause bootloop with the TWRP logo. I can't boot it to enable the oem unlock on the developer options in settings. and I can't flash any images because it is OEM locked.
I see on the bootloader
Code:
Console [NULL]: null
Device is LOCKED. Status Code: 2
Any HELP guys!? I really don't know what to do. :crying::crying::crying:
rongregoryred said:
Hi guys, I flash nexus 6 factory image on Linux. after that I lock my OEM bootloader. But I accidentally flash the recovery.img(twrp).
It cause bootloop with the TWRP logo. I can't boot it to enable the oem unlock on the developer options in settings. and I can't flash any images because it is OEM locked.
I see on the bootloader
Code:
Console [NULL]: null
Device is LOCKED. Status Code: 2
Any HELP guys!? I really don't know what to do. :crying::crying::crying:
Click to expand...
Click to collapse
Why donot you use wugfresh tool kit to repair your phone. It's awesome and it is simple. Just be sure your bootloader is unlocked.
here is the link
http://www.wugfresh.com/nrt/
Quote back if you expect a reply
Hnk1 said:
Why donot you use wugfresh tool kit to repair your phone. It's awesome and it is simple. Just be sure your bootloader is unlocked.
here is the link
http://www.wugfresh.com/nrt/
Quote back if you expect a reply
Click to expand...
Click to collapse
Thanks for the reply. But the problem is, it is OEM locked. Anyway I will try it. :good:
rongregoryred said:
Thanks for the reply. But the problem is, it is OEM locked. Anyway I will try it. :good:
Click to expand...
Click to collapse
You can easily unlock it from the toolkit!
Good Luck. Tell me the good news when you have fixed it!
rongregoryred said:
Hi guys, I flash nexus 6 factory image on Linux. after that I lock my OEM bootloader. But I accidentally flash the recovery.img(twrp).
It cause bootloop with the TWRP logo. I can't boot it to enable the oem unlock on the developer options in settings. and I can't flash any images because it is OEM locked.
I see on the bootloader
Code:
Console [NULL]: null
Device is LOCKED. Status Code: 2
Any HELP guys!? I really don't know what to do. :crying::crying::crying:
Click to expand...
Click to collapse
If you didn't enable OEM unlocking in developer options you're down and out. Then only sending it in for repair is the only option.
Verstuurd vanaf mijn Nexus 6 met Tapatalk
rongregoryred said:
Hi guys, I flash nexus 6 factory image on Linux. after that I lock my OEM bootloader. But I accidentally flash the recovery.img(twrp).
It cause bootloop with the TWRP logo. I can't boot it to enable the oem unlock on the developer options in settings. and I can't flash any images because it is OEM locked.
I see on the bootloader
Code:
Console [NULL]: null
Device is LOCKED. Status Code: 2
Any HELP guys!? I really don't know what to do. :crying::crying::crying:
Click to expand...
Click to collapse
If you have TWRP installed, it may be recoverable.
From fastboot, enter these commands:
fastboot format cache
fastboot format userdata
This should get you out of bootloop and allow you to "push" or MTP transfer a ROM and flash it.
Hnk1 said:
You can easily unlock it from the toolkit!
Good Luck. Tell me the good news when you have fixed it!
Click to expand...
Click to collapse
gee2012 said:
If you didn't enable OEM unlocking in developer options you're down and out. Then only sending it in for repair is the only option.
Verstuurd vanaf mijn Nexus 6 met Tapatalk
Click to expand...
Click to collapse
Evolution_Freak said:
If you have TWRP installed, it may be recoverable.
From fastboot, enter these commands:
fastboot format cache
fastboot format userdata
This should get you out of bootloop and allow you to "push" or MTP transfer a ROM and flash it.
Click to expand...
Click to collapse
Thanks guys! I already fixed it using this,
Code:
fastboot -w
this formats the userdata and cache, reboot it and it fixed the TWRP logo bootloop.
Thanks for the help guys! Really appreciate it! :good: :good: :good:
Thank you!!
I followed the instructions posted above for Wugfresh & it saved my nexus 6!! Thank you!
hey
i have the same issue with my phone can sombody help me plz
I need help
theprof23 said:
I need help
Click to expand...
Click to collapse
Give more information, i dont understand
Enviado desde mi Moto X mediante Tapatalk
theprof23 said:
I need help
Click to expand...
Click to collapse
install adb and fastboot. connect your phone. open cmd where fastboot has been installed and type fastboot reboot
I update my SM-N910T [Official] Firmware EPJ2 through update system Update.
But now i can't install TWRP using odin after update
DOWNLOADING MODE
FOLLOWING ERROR WRITTEN WITH RED
UDC START
SECURE CHECK FAIL : RECOVERY
Custom Binary(Recovery) Blocked By R/L
sam_aly said:
DOWNLOADING MODE
FOLLOWING ERROR WRITTEN WITH RED
UDC START
SECURE CHECK FAIL : RECOVERY
Custom Binary(Recovery) Blocked By R/L
Click to expand...
Click to collapse
your reactivation lock must be turned off in settings/security .double check if its turn on then turn it off.and make sure usb debugging is checked on in developer options.
Trex888 said:
your reactivation lock must be turned off in settings/security .double check if its turn on then turn it off.and make sure usb debugging is checked on in developer options.
Click to expand...
Click to collapse
Thank you Trex :good:
Reactivation lock was on On !!
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
cheleby said:
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
There is no need of Chinese ROM or edl mode. You can unlock your device with global stable ROM. Just follow these steps.
1. First request for unlock permission from here
2. Wait for the permission to arrive.
3. Connect your device in fastboot mode. And unlock.
cheleby said:
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Unless they've changed things you need a developer rom to unlock. If you're on Global Stable download the latest Global Developer rom and use the Updater app to install it (three dots - choose package to install). It will wipe your phone.
Laurencito said:
Unless they've changed things you need a developer rom to unlock. If you're on Global Stable download the latest Global Developer rom and use the Updater app to install it (three dots - choose package to install). It will wipe your phone.
Click to expand...
Click to collapse
Hı again. I solved with below
)*Settings---> About phone---> MIUI Version (Tap on it to enable developer option), this option is available in MIUI 8.1 onwards.*After you've enabled developer option then head towards:
Settings---> Additional settings---> Developer option and bind your approved Mi account under Mi Unlock Status.
2. Log into the Mi account which has acquired unlocking permission on your device
3. Turn off your device, press the Power button and Volume - button at the same time to enter bootloader mode*
4. Log into the unlocking tool on PC with the same Mi account. Connect the device with the PC using USB cable
5. Press 'Unlock'. The unlocking process will complete in about 10 seconds
MI 5 cihazımdan Tapatalk kullanılarak gönderildi