Rooted 5.1 back to 4.4.4 how to - Verizon Motorola Droid Turbo Q&A, Help & Troublesh

Just want an explained way of how to do this. I wanna get back to kit kat. Currently running cf 1.2a and wanna get back to kit kat for various reasons. Thanks in advance

Same!
I'm curious as well! Haven't seen a guide around

Would also like this answered!
Same here! I took the upgrade before i knew better, now i am stuck in LP land? How can I get back to 4.4 and root my phone?
Thanks!

If you took the ota your **** out of luck. If your rooted 5.1 you can go back

I'm not responsible for anything, blah blah blah. I have done this on my Droid Turbo though, and it worked. Credit to mattlgroff for this.
1. Download this http://batakang.com/ftp/TurboTools/TurboFixEmUpKitkat.zip (if the link is down, let me know and I will mirror it)
2. Boot your phone into fastboot (bootloader) mode. Since you're rooted and on 5.1, I'm assuming you know how to do this.
3. Extract the zip file from step 1 into the same folder that contains fastboot.exe on your computer. I'm also assuming that you have fastboot set up already.
4. Plug your phone into the computer.
5. Double click on the batch file included with the zip.
Done. You should be back to stock 4.4.4.

Thanks. I did the same and it worked. I am back on cf 1.5.5cc. It's great to be back on kit kat.

truckapillar said:
Just want an explained way of how to do this. I wanna get back to kit kat. Currently running cf 1.2a and wanna get back to kit kat for various reasons. Thanks in advance
Click to expand...
Click to collapse
What is major reasons you are switching back to kitkat
Sent from my XT1254 using XDA Free mobile app
---------- Post added at 10:05 AM ---------- Previous post was at 09:22 AM ----------
Does it make a difference on what system version I was I was on 39. Than used mofo to root and update with cf rom to 5.1 now I want back can I still use the link you provided if so how to root after that 4.4.4
Sent from my XT1254 using XDA Free mobile app
---------- Post added at 10:36 AM ---------- Previous post was at 10:05 AM ----------
Also what about full wipe, is it required also does this delete any personal data
Sent from my XT1254 using XDA Free mobile app

I had better battery on kit kat. Viper is prob the main reason I went back. Just personal preference really. I was on 5.1 I did a factory reset and wiped cache. Then I ran the fastboot files to go back to su2-12. Then I flashed cfs 1.5.5c. That's all I did.

truckapillar said:
I had better battery on kit kat. Viper is prob the main reason I went back. Just personal preference really. I was on 5.1 I did a factory reset and wiped cache. Then I ran the fastboot files to go back to su2-12. Then I flashed cfs 1.5.5c. That's all I did.
Click to expand...
Click to collapse
Where do I get those su2-12 fastboot files
Sent from my XT1254 using XDA Free mobile app

siberian85 said:
Where do I get those su2-12 fastboot files
Sent from my XT1254 using XDA Free mobile app
Click to expand...
Click to collapse
http://rootjunkysdl.com/?device=Adb Fastboot Files download the adb files. Then under droid turbo firmware dl the su2-12 firmware. Place the 4 fastboot files in with the unzipped contents of the firmware. Then run batch files. It'll get you back to su2-12 4.4.4. Then if you have root you can mofo flash a kit kat img.

Got it ignore
Sent from my XT1254 using XDA Free mobile app

Related

Unrooted Bionic, but Liberty ROM still on phone

Hey guys,
unrooted the bionic, but Liberty rom is still very present. super user is gone, and it looks like it was unrooted successfully. Any ideas how to get rid of the boot loader and other Liberty artifacts?
thanks
yungwunn911 said:
Hey guys,
unrooted the bionic, but Liberty rom is still very present. super user is gone, and it looks like it was unrooted successfully. Any ideas how to get rid of the boot loader and other Liberty artifacts?
thanks
Click to expand...
Click to collapse
run the fxz file
ran it twice on RSD lite and keep getting a cycling boot screen...
hmm...any tips?
yungwunn911 said:
ran it twice on RSD lite and keep getting a cycling boot screen...
hmm...any tips?
Click to expand...
Click to collapse
Do you have usb debugging on? If not it needs to be on. Also are you in fastboot mode? Volume down then power at the same time
---------- Post added at 06:41 PM ---------- Previous post was at 06:30 PM ----------
If all else fails, hopefully you made a nandroid backup of your phone when it was stock right after you rooted it and you can always reboot and restore your nandroid then un root.
Use dhacker's one-click restore. It's stickied in development. I guarantee it'll fix you right up.
Sent from my DROID BIONIC using xda premium
Similar experience here...but i know why. I did the one click root using the smaller file that preserves data.
Sent from my DROID BIONIC using xda premium
Go here:
http://forum.xda-developers.com/showthread.php?t=1279825
Sent from my DROID BIONIC using xda premium

[Q] Safestrap Stock slot showing 0 space available

accidentally installed a jellybean copy of dynamic instead of the kit kat version.Safe strap is the kit kat version. Now my stock slot is showing 0 space for system and I cant seem to straighten this mess out. Anyone have any help they can give?
no one has any ideas how to fix this?
Did you install the JB version in a slot? Or is it in the stock slot? Does the rom boot? What happens if you try to install something to the stock slot?
I_R_Josh said:
Did you install the JB version in a slot? Or is it in the stock slot? Does the rom boot? What happens if you try to install something to the stock slot?
Click to expand...
Click to collapse
jb version went into the stock slot, boots till it gets to the safestrap options screen and i cannot install anything into any slot....the stock slot shows
0 space but the data partition has almost 27 gigs.
im at a loss
What (if any) errors do you get when doing just a wipe on the stock slot?
Sent from my SM-N900A using xda app-developers app
I_R_Josh said:
What (if any) errors do you get when doing just a wipe on the stock slot?
Sent from my SM-N900A using xda app-developers app
Click to expand...
Click to collapse
dont have the option to wipe the stock slot. only option is activate
Will it let you mount system in the "mount" tab?
Sent from my SM-N900A using xda app-developers app
---------- Post added at 05:42 PM ---------- Previous post was at 05:33 PM ----------
I had some file system errors that only went away with a wipe from stock recovery.
Sent from my SM-N900A using xda app-developers app
I_R_Josh said:
Will it let you mount system in the "mount" tab?
Sent from my SM-N900A using xda app-developers app
---------- Post added at 05:42 PM ---------- Previous post was at 05:33 PM ----------
I had some file system errors that only went away with a wipe from stock recovery.
Sent from my SM-N900A using xda app-developers app
Click to expand...
Click to collapse
how do i get the stock recovery back?
no it wont let me mount system ....and thanks for your help here
I was still able to boot the rom, so I rebooted to stock recovery from there. There's usually a combination (holding home/power/volume) while booting but I haven't done it yet on this phone. Lemme look around/test on my phone.
Sent from my SM-N900A using xda app-developers app
Hold power/home/volume up all at the same time.
(I sent this earlier but it never went through. ..)
Sent from my SM-N900A using xda app-developers app
Tried kies recovery and now its even more messed up. I'll play with it some more and see what happens
Sent from my GT-N8013 using xda app-developers app
Same problem
knoshann said:
accidentally installed a jellybean copy of dynamic instead of the kit kat version.Safe strap is the kit kat version. Now my stock slot is showing 0 space for system and I cant seem to straighten this mess out. Anyone have any help they can give?
Click to expand...
Click to collapse
I had installed kitkat instead of jelly bean, was even on new kit kat safestrap 3.72... I even tried the factory recoverys wipe, now i have no roms, and 0/0 free space on system and 0/0 on data in stock slot, and nothing else installed at all.. when i did at least have working rom in slot 1. Someone please haaalp! lol
kizzle4 said:
I had installed kitkat instead of jelly bean, was even on new kit kat safestrap 3.72... I even tried the factory recoverys wipe, now i have no roms, and 0/0 free space on system and 0/0 on data in stock slot, and nothing else installed at all.. when i did at least have working rom in slot 1. Someone please haaalp! lol
Click to expand...
Click to collapse
Here you go. Follow this guide. This is probably your only option at this point.
http://forum.xda-developers.com/showthread.php?t=2559715
Sent from my SM-N900A using xda app-developers app
Thanks. Have all that downloaded and ready to go.. have rom running on slot 1. Just obviously missing space overall now. Is there anyway to just restore that partition? Has anyone else experienced this? All I did was wipe like the rim thread told me to do. Don't understand how and why this happened.
kizzle4 said:
Thanks. Have all that downloaded and ready to go.. have rom running on slot 1. Just obviously missing space overall now. Is there anyway to just restore that partition? Has anyone else experienced this? All I did was wipe like the rim thread told me to do. Don't understand how and why this happened.
Click to expand...
Click to collapse
Any luck with this? I have about the same issue but haven't had a chance to give this a try
knoshann said:
Any luck with this? I have about the same issue but haven't had a chance to give this a try
Click to expand...
Click to collapse
Ended up doing mj5 restore. Staying on jelly bean for now...

Please help (can't boot back into the os)

Its stuck on the lg logo
when i plug it in to my computer it does't recognize the phone
i can only go to download mode
is my phone fully bricked
phillip_viado said:
Its stuck on the lg logo
when i plug it in to my computer it does't recognize the phone
i can only go to download mode
is my phone fully bricked
Click to expand...
Click to collapse
How did this happen?
Visa Declined said:
How did this happen?
Click to expand...
Click to collapse
i was testing clockworkmod
what does "testing" mean? what exactly did you do prior to this happening?
what version are you on? what file did you flash?
if you want help, you have to be more specific..
phillip_viado said:
Its stuck on the lg logo
when i plug it in to my computer it does't recognize the phone
i can only go to download mode
is my phone fully bricked
Click to expand...
Click to collapse
You need to flash the correct laf.img for your device so you can enter download mode all the way. Then you will be able to tot back. You were on jb 4.2.2. Right? I need more info. What variant do you have?
Sent from my LG-LS980 using XDA Premium 4 mobile app
im on the at&t d950, i was on kitkat update, and used playfulgods recovery app. thats why it went like like, i was testing the app on kitkat. it does not work on kitkat
phillip_viado said:
im on the at&t d950, i was on kitkat update, and used playfulgods recovery app. thats why it went like like, i was testing the app on kitkat. it does not work on kitkat
Click to expand...
Click to collapse
As far as I know, there is NO way to fix what you've done. I had the exact same problem and exhausted all options trying to flash back to stock, flash the laf.img etcetera. The problem is the phone will no longer communicate with a computer. It's a hard brick. @brandonAtty and @aznrice24 can confirm as we all went thru the same thing. I ordered a new phone thru ins
Sent from my LG-D950 using XDA Premium 4 mobile app
phillip_viado said:
im on the at&t d950, i was on kitkat update, and used playfulgods recovery app. thats why it went like like, i was testing the app on kitkat. it does not work on kitkat
Click to expand...
Click to collapse
I'm curious why you tested it in kit kat. He says right in the op it doesn't work. what happens in download mode? You can't use the lgflash tool and restore
Sent from my LG-D959 using Tapatalk
so many people are gonna brick their phones because they don't READ EVERYTHING BEFORE FLASHING ANYTHING!
i did it before it was confirmed it was not working on kitkat
and F.Y.I i do read before flashing, i even go back and read it twice and third time before i do anything. im those idiots that does not read before flashing.
like i said i was TESTING
phillip_viado said:
i did it before it was confirmed it was not working on kitkat
and F.Y.I i do read before flashing, i even go back and read it twice and third time before i do anything. im those idiots that does not read before flashing.
like i said i was TESTING
Click to expand...
Click to collapse
Okay it's been confirmed for a while, but whatever man. There may be hope though. Go into device manager and tell me what the device is named. Also you never answered me about what happens with the flash tool?
Sent from my LG-D959 using Tapatalk
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
The problem is that KK will not boot on a JB aboot so we need to get the KK aboot back or a while JB ROM on it
Sent from my LG-D959 using Tapatalk
kintwofan said:
Okay it's been confirmed for a while, but whatever man. There may be hope though. Go into device manager and tell me what the device is named. Also you never answered me about what happens with the flash tool?
Sent from my LG-D959 using Tapatalk
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
The problem is that KK will not boot on a JB aboot so we need to get the KK aboot back or a while JB ROM on it
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
it does not say anything it does not recognize the phone. the flash tool doesn't do anything because it doesn't recognize the phone. the phone doesn't go fully to download mode
i can go to cwm by holding down power and volume up if that helps
Wait you can get into cwm? Week if someone who is on ATT kit kat will upload their factory aboot and recovery I may have something that will fix you.
Sent from my LG-D959 using Tapatalk
kintwofan said:
Wait you can get into cwm? Week if someone who is on ATT kit kat will upload their factory aboot and recovery I may have something that will fix you.
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
yes i can boot into cwm but i don't know if cwm is fully functional.
i found this but i cant download it
http://forum.xda-developers.com/showthread.php?t=2666763
phillip_viado said:
yes i can boot into cwm but i don't know if cwm is fully functional.
i found this but i cant download it
http://forum.xda-developers.com/showthread.php?t=2666763
Click to expand...
Click to collapse
I'm sure it's fine if it boots so if someone gets me those files I think we can fix it
Sent from my LG-D959 using Tapatalk
kintwofan said:
I'm sure it's fine if it boots so if someone gets me those files I think we can fix it
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
he's reuploading onto a different host. if your method works you will be saving me a fortune on buying a new phone. right now im using a nokia 1520. a windows phone
Who's reuploading? If D-fuse that's T-Mobile. I need the att files
Sent from my LG-D959 using Tapatalk
Not sure if this would work but is it possible to pull them from an extracted kdz file? http://storagecow.eu/index.php?dir=Xda%2FLG+G+Flex%2FStock%2F
extractorhttp://forum.xda-developers.com/showthread.php?t=2600575
kintwofan said:
Who's reuploading? If D-fuse that's T-Mobile. I need the att files
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
i pm'd him and he said he's uploading the att files too
PattyNYC said:
Not sure if this would work but is it possible to pull them from an extracted kdz file? http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/
extractorhttp://forum.xda-developers.com/showthread.php?t=2600575
Click to expand...
Click to collapse
Yes it is possible, but I don't have that much time right now
Sent from my LG-D959 using Tapatalk

[Q] Root for VS980 on KitKat 4.4.2?

Is there a method to root the Verizon LG G2 (VS980) on the stock OTA Kit Kat 4.4.2 build yet?
I bought the phone used, already had the OTA on it...now I just need root.
Not interested in Rom'ing, just need tethering without the $30/month charge for the few times I use it and need root to do it.
Thanks!
mcdonsco said:
Is there a method to root the Verizon LG G2 (VS980) on the stock OTA Kit Kat 4.4.2 build yet?
I bought the phone used, already had the OTA on it...now I just need root.
Not interested in Rom'ing, just need tethering without the $30/month charge for the few times I use it and need root to do it.
Thanks!
Click to expand...
Click to collapse
ioroot25 should still work...
I'm considering a G2 also and have been wondering the same. From what I gathered you would have to go back to 4.2.2 first, gain root, and then flash back to 4.4.2. Someone correct me if I'm wrong please.
Juggernaut79 said:
I'm considering a G2 also and have been wondering the same. From what I gathered you would have to go back to 4.2.2 first, gain root, and then flash back to 4.4.2. Someone correct me if I'm wrong please.
Click to expand...
Click to collapse
You don't have to. Ioroot25 will root the official kk. That's what I used and it worked without an issue. Just make sure all the proper drivers are installed on your computer...
Sent from my VS980 4G using XDA Premium 4 mobile app
mjones73 said:
ioroot25 should still work...
Click to expand...
Click to collapse
GRACIAS!...Didn't know that.
mjones73 said:
ioroot25 should still work...
Click to expand...
Click to collapse
As far as that goes, how is installing the LG G2 unified drivers supposed to go? I found the download link for them in the main 200 page thread for this. Extracted the zip, but none of the .exe files do anything when run. Is that normal or is something wrong? For example I tried running InstallUSB64.exe but absolutely nothing happens.
Another more recent post on like page 185 of the thread had another download link, but that just leads to a file called "LG" with no extension and it doesn't appear to be a .zip
---------- Post added at 10:37 AM ---------- Previous post was at 09:58 AM ----------
ivanalbright said:
As far as that goes, how is installing the LG G2 unified drivers supposed to go? I found the download link for them in the main 200 page thread for this. Extracted the zip, but none of the .exe files do anything when run. Is that normal or is something wrong? For example I tried running InstallUSB64.exe but absolutely nothing happens.
Another more recent post on like page 185 of the thread had another download link, but that just leads to a file called "LG" with no extension and it doesn't appear to be a .zip
Click to expand...
Click to collapse
Nevermind, got it. The link to the driver is at the very bottom of this post: http://forum.xda-developers.com/showpost.php?p=53128251&postcount=1847
You have to add the extension .exe
Root successful with the instructions listed there. Used ioroot25. Running android 4.4.2
Is root all I need to flash Roms? Do I need to unlock the boot loader as well?
Sent from my VS980 4G using XDA Premium 4 mobile app
coliny59 said:
Is root all I need to flash Roms? Do I need to unlock the boot loader as well?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No you will need to root and then install custom recovery. Depending on what you are on. If you are on kitkat you can use autorec, and anything earlier you can use flashify.
simple_fear85 said:
No you will need to root and then install custom recovery. Depending on what you are on. If you are on kitkat you can use autorec, and anything earlier you can use flashify.
Click to expand...
Click to collapse
I understand this phone has an e fuse. Will it be tripped by installing a custom recovery?
Sent from my VS980 4G using XDA Premium 4 mobile app
coliny59 said:
I understand this phone has an e fuse. Will it be tripped by installing a custom recovery?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am not sure about the question but I know when you root this phone there is a trip where it will show in the lg menu that it is rooted. In order to get rid of that you will have to return to stock. Tell you though I have had this phone for a few months now and I am glad i finally decided to root and put custom recovery on. Its my phone and set up the way I want with root and all.
simple_fear85 said:
I am not sure about the question but I know when you root this phone there is a trip where it will show in the lg menu that it is rooted. In order to get rid of that you will have to return to stock. Tell you though I have had this phone for a few months now and I am glad i finally decided to root and put custom recovery on. Its my phone and set up the way I want with root and all.
Click to expand...
Click to collapse
Thanks for the feedback!
Sent from my VS980 4G using XDA Premium 4 mobile app
coliny59 said:
Thanks for the feedback!
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
no problem. If you want a nice working asop rom check on Vanir 4.4.3
I'm having a hell of a time trying to get this thing to root. I followed all of the instructions for installing the LG device drivers and when I go to run the IOroot25 it flashes really quickly and then goes away. USB debugging is enabled and I have tried it in ethernet mode and charging mode. Both produce the same result. Do I need to remove any other drives I might have on my computer in order to get it to work? Any other ideas?
yoderz said:
I'm having a hell of a time trying to get this thing to root. I followed all of the instructions for installing the LG device drivers and when I go to run the IOroot25 it flashes really quickly and then goes away. USB debugging is enabled and I have tried it in ethernet mode and charging mode. Both produce the same result. Do I need to remove any other drives I might have on my computer in order to get it to work? Any other ideas?
Click to expand...
Click to collapse
You need to be in Ethernet mode.
Once it boots into recovery, did you scroll down and select "install from adb"?
tech_head said:
You need to be in Ethernet mode.
Once it boots into recovery, did you scroll down and select "install from adb"?
Click to expand...
Click to collapse
Yeah, I had everything setup correctly and it didn't work. Tried the same exact thing on another computer and it worked flawlessly. Thanks though!
yoderz said:
Yeah, I had everything setup correctly and it didn't work. Tried the same exact thing on another computer and it worked flawlessly. Thanks though!
Click to expand...
Click to collapse
Im having problems rooting it as well. I installed the latest drivers 1.14 I believe, and when trying to root it using ioroot25 it says downgrade to a previous version.
I do have it on Ethernet mode, and it reboots it into recovery, but that's it. I select apply update from adb but again, on ioroot it does nothing after the suggestion to downgrade.
any suggestions?
Make sure your phone is setup. Debugging mode is set. Unknown sources is set. Phone is on airplane mode. Plug into computer and start ioroot25 and follow steps
Sent from my LG-VS980 using XDA Free mobile app
Guys just use towelroot to root. You install an app and push a button.
Sent from my VS980 4G using XDA Free mobile app
squidder said:
Guys just use towelroot to root. You install an app and push a button.
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
I second this. I used it just yesterday to root a stock G2 on the Kit Kat update.
I wouldnt trust in my opinion. Ioroot way easier
Sent from my LG-VS980 using Tapatalk

[Q] How to do a stock MJ5 upgrade to NC2 ?

Guys
I have a SM-900A on MJ5, not rooted, on ultra mobile (t-mobile)
1. software update says there is no update available.
2. i tried 240258.zip (or something - renamed to update.zip) in sd card...Install from external storage...gives me some error about keys not matching, wipes /data and reboots
The guide to go up to 4.4.2 over here uses a UrDroid rooted 4.4.2 after safestrap. But that was back in Apr 2014 when towelroot was not available.
Where can i just download the correct update.zip and do a stock upgrade to 4.4.2? i do want to root after it but i am assuming towelroot should work without a hiccup. Am i missing something here?
Thanks
I JUST did this same dance. Don't follow any other instructions except for the "Ready to update to KK from JB" guide laid out here. You'll be incredibly pleased ha. So easy and hiccup free. Use Geohot's root toolbar to get you started! Good luck! PM me if you have problems
EDIT: Guide is here http://forum.xda-developers.com/showthread.php?t=2710972
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
monkor said:
I JUST did this same dance. Don't follow any other instructions except for the "Ready to update to KK from JB" guide laid out here. You'll be incredibly pleased ha. So easy and hiccup free. Use Geohot's root toolbar to get you started! Good luck! PM me if you have problems
EDIT: Guide is here http://forum.xda-developers.com/showthread.php?t=2710972
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks monkor..will gave that a shot
edit: monkor..that was I asking about when I said do you really need to safestrap? Can't I just Odin that urdroid rom or the stock update? (Where is the stock update of 4.4.2?)
From what I've read, everyone who deviates from that guide has problems. You might Hey lucky and not, but I'd just go roti the easy method. Took me all of five minutes
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
monkor said:
From what I've read, everyone who deviates from that guide has problems. You might Hey lucky and not, but I'd just go roti the easy method. Took me all of five minutes
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok here's where i am at
1. rooted on mj5 using kingo
2. safestrap 3.71 done
3. when i try to do a wipe data in ss, i am getting a error on /data and /data media (something about encryption, i hadn't touched any settings in mj5..i was pure stock)...any ideas what might be going on?
Thanks
AtlzBest26 said:
ok here's where i am at
1. rooted on mj5 using kingo
2. safestrap 3.71 done
3. when i try to do a wipe data in ss, i am getting a error on /data and /data media (something about encryption, i hadn't touched any settings in mj5..i was pure stock)...any ideas what might be going on?
Thanks
Click to expand...
Click to collapse
i just went to bestbuy and got 4.4.2. Btw all they did was Odin the stock 4.4.2 in and im sure he only did that.

Categories

Resources