I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery
Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....
send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.
Hi I've searched some, and I haven't found anything for this setup. My captivate was working fine when I last used it a while back but when I turned it on, for a few weeks now, its been stuck in a boot loop. The problem is that I have never flashed custom roms or anything, its just been its stock- update as officially released,etc. Also, aside from that, I don't have any backups of anything because of computer issues. Is there anything I could do to just get it going again without chancing loosing all of the pictures I have on there?
CheesyMcTender said:
Hi I've searched some, and I haven't found anything for this setup. My captivate was working fine when I last used it a while back but when I turned it on, for a few weeks now, its been stuck in a boot loop. The problem is that I have never flashed custom roms or anything, its just been its stock- update as officially released,etc. Also, aside from that, I don't have any backups of anything because of computer issues. Is there anything I could do to just get it going again without chancing loosing all of the pictures I have on there?
Click to expand...
Click to collapse
Can you get to Download and / or recovery modes?
You could try a Factory Reset from recovery. All that I have read says that it does not delete pictures and music. You are likely to loose apps you have downloaded and the app data. (Double check to insure this is correct.)
If a factory reset does not work things get a bit more complicated. For example, you could possible move files from your phone to your PC using adb if you can get to download mode.
dawgdoc said:
Can you get to Download and / or recovery modes?
You could try a Factory Reset from recovery. All that I have read says that it does not delete pictures and music. You are likely to loose apps you have downloaded and the app data. (Double check to insure this is correct.)
If a factory reset does not work things get a bit more complicated. For example, you could possible move files from your phone to your PC using adb if you can get to download mode.
Click to expand...
Click to collapse
From what I've still been researching, anything factory reset is supposed to completely wipe everything on the phone. Is there any way to backup or get anywhere with download mode, because I can get into download mode, but it doesn't register with my computer so I don't know what I can do from it.
Hello,
I've been rooted for a few months now and have never had any problems. I wanted to use that Milk Music app from Samsung so I followed the instructions and was able to get it working on my phone and have been for awhile. I recently decided it would be a good idea to change the build.prop file back to its original state, so I copied and pasted it in using Root Browser. (I had made a backup file stored elsewhere). Once I did that I rebooted my phone for the changes to take effect. After I did that I cannot get my phone to turn back on. It displays the LG animated logo screen and then goes completely black. The light on top of the phone radiates blue/green. I've read through several forums about this issue and have tried everything in order to get it to work and for some reason, using my computer and ADB always gives me an error: device not found. I have installed the drivers and everything. Anyone else run in to this problem before? I would really appreciate it.
If you are on stock rom, just rooted. I would think you should be able to factory reset through stock recovery.
Confirm the process but i think you power completely off. Then hold volume down and power at the same time when you see the lg logo release both buttons then press both buttons and hold them.
Should take you to factory reset.
Not 100% certain but this will probably be your next step if you can't get a computer to see it.
Good luck
2111
The factory data reset didn't really change anything. For some reason I cannot boot into recovery mode either. I can put it in download mode though, but my computer still has a problem recognizing it.
brody_low said:
The factory data reset didn't really change anything. For some reason I cannot boot into recovery mode either. I can put it in download mode though, but my computer still has a problem recognizing it.
Click to expand...
Click to collapse
If you can get into dl mode then you should be able to return it to stock which should reset everything. Returning to stock has its own downside but at least you'll be up and running again.
After my phones battery was fully drained, i kept it for charging and after some time when i tried to restart it
Boot Logo animation appeared, then whole screen gone blank. It just shows the active notification icons and when power button pressed it shows power off option.
I am having the exact same issue. Have you had a luck resolving it?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a few people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?
I had to factory reset my phone.. There was no other way to solve that issue, no other forum moderator is providing solution. There are many threads regarding this issue. Lets hope next update comes soon fixing this issue.
Hmm, ok, thanks. That's probably what I'll resort to doing. I was hoping to find a way to not lose my data. Or at least get a copy of some of it before resetting...
Me too have tried many things for not losing data, my usb debugging was also enabled. But pc didnt recognized any device. There was one article regarding recovering data after factory reset but you need to root your device after u reset ur device. Then you can recover data with DrFone data recovery or Es android recovery. I avoided it because i dont want to lose my warranty.
Hello,
I did a reboot and now I can't use my phone anymore. I see the Boot animation but after the Boot up, the screen just turns black. I receive notifications and active display is working, also I can start my camera with the twist but I can't take picture because the touchscreen does not respond. On active display or the power off pop up, the touchscreen is working. So I did a cache partition wipe but this hasn't fixed my problem. The strange thing is that after a couple of frustrated reboots, the Boot animation changed to the old animation with the spinning world. I want to reset the phone via recovery but first I need to backup my data. I have very important Data on my phone like whatsapp log or Photos and videos.. I can't connect my phone to the computer because I have a pin... How I can Backup my data and what caused the black screen?
If your bootloader is unlocked you can flash TWRP. TWRP has the ability to decrypt userdata if you have the password. I don't know if it can decrypt the moto x or not, because TWRP only officially support ASOP type encryption, if motorola uses a different technique for encryption it will say the password is wrong. If it works you can browse and backup files from TWRP recovery.
If it says the password is wrong or you don't have the bootloader unlocked, then you are SOL and have lost everything.
In either case doing a factory reset will hopefully fix your issue.
Sent from my XT1095
So I did a factory reset now. But I stuck in Bootloop, i just see the M logo. How I can fix it? And no, my Moto X is stock like out of the Box.
rupro327 said:
So I did a factory reset now. But I stuck in Bootloop, i just see the M logo. How I can fix it? And no, my Moto X is stock like out of the Box.
Click to expand...
Click to collapse
After the factory reset bootup takes longer than normal, how long did you wait?
If that is not the case, what model moto x do you have? For example mine is xt1095. Also what version of android do you have? 5.0, 4.4.4, 5.0.2, 5.1, etc?
Sent from my XT1095
same issue today
also have the same issue, black screen after reboot. moto voice, active display/notifications are responsive, camera too when twisting the phone. moto voice says "unlock your phone to continue" but i currently don't have any screen locks or anything, just swipe. i have a pure edition running on 5.1. Skeptical about a reset since the phone is still responsive.. tried looking for other fixes, but looks like this issue is just coming up today...
This exact same thing happened to me. Updated to 5.1 about a week ago via the OTA. Wiping cache did nothing. Diagnosing it as a software issue, I attempted to sideload the official 5.1 OTA that's posted elsewhere in the forums. It came back as installation aborted, so I gave up on any hope of keeping my data and did a factory reset. Now all it does is bootloop, sometimes settling on the prone android no command screen for a little while. I can boot into recovery and the bootloader, but thats it. Really hoping someone can come up with a solution. XT1096.
AGISCI said:
After the factory reset bootup takes longer than normal, how long did you wait?
If that is not the case, what model moto x do you have? For example mine is xt1095. Also what version of android do you have? 5.0, 4.4.4, 5.0.2, 5.1, etc?
Sent from my XT1095
Click to expand...
Click to collapse
I've waited about 30 minutes, in this time my phone just bootet into the recovery by his self. I've contacted Motorola and I'll send my device to repair.
It's a xt1092 with 5.1 RETDE.
I personally think that this issue is caused by the Boot animation update.
swankylaxplayer said:
This exact same thing happened to me. Updated to 5.1 about a week ago via the OTA. Wiping cache did nothing. Diagnosing it as a software issue, I attempted to sideload the official 5.1 OTA that's posted elsewhere in the forums. It came back as installation aborted, so I gave up on any hope of keeping my data and did a factory reset. Now all it does is bootloop, sometimes settling on the prone android no command screen for a little while. I can boot into recovery and the bootloader, but thats it. Really hoping someone can come up with a solution. XT1096.
Click to expand...
Click to collapse
Flash the stock 5.1 logo, kernel, system, modem, baseband and recovery for the XT1096 - the full image files are available.
JulesJam said:
Flash the stock 5.1 logo, kernel, system, modem, baseband and recovery for the XT1096 - the full image files are available.
Click to expand...
Click to collapse
Thank you! I don't know how I missed that! Back in business now.
nrsmsn said:
also have the same issue, black screen after reboot. moto voice, active display/notifications are responsive, camera too when twisting the phone. moto voice says "unlock your phone to continue" but i currently don't have any screen locks or anything, just swipe. i have a pure edition running on 5.1. Skeptical about a reset since the phone is still responsive.. tried looking for other fixes, but looks like this issue is just coming up today...
Click to expand...
Click to collapse
I have the exact same problem. Any fix?
Edit: Can't get adb to recognize phone. Phone is rooted.
kunal_07 said:
I have the exact same problem. Any fix?
Edit: Can't get adb to recognize phone. Phone is rooted.
Click to expand...
Click to collapse
Have you tried reflashing the system image from the bootloader?
is that possible without adb? If so, can you tell me how?
kunal_07 said:
is that possible without adb? If so, can you tell me how?
Click to expand...
Click to collapse
You still do everything through terminal. You have to cd to your folder that has adb and fastboot enclosed, usually platform-tools. Instead of starting each command with "adb", you'll start with "fastboot" and you'll be flashing these while your phone is at the fastboot screen.
The full image files are in the forums, and all the commands you'll need, in order, are posted in this thread earlier
I have found that some time the fastboot from Moto wouldn't recognize the phone. I, then, use the mfastboot-v2 found somewhere around this forum works great.
Me too faced this problem few days back. Only option left to do was factory reset.
Read below just to go through of what i faced:
( I had gone through bunch of articles for restoring my data but i had a pin lock because of which while connecting to pc it couldnt detect phone.
Other things i tried includes flashing lockscreen bypass zip via stock recovery. There i faced signature verification failed error because i had done it through stock recovery where it doent let u toggle signature verification on/off as in CWM. )
And for those who wants their data back , i found many articles of data recovery after factory reset. But it needed your device to be rooted. All you have to do is after factory reset dont make use of phone and after rooting you can recover your phone by software as EASEUS android recovey, Dr fone android recovery. Thats all .
I am too facing this issue as of last night,, I have the verizon version (complete stock, no root, locked bootloader) and I am not sure how to go about fixing this without losing all my data.. I tried wiping cache but it did nothing.. Can anyone provide some kind of troubleshoot guide please? It would be much appreciated.
A friend of mine is also having the same issue.
I tried the 5.0 image and it won't flash.
I'm locked and without root. Is it even possible to flash even the factory images? (And yes, I've tried to go to the Customer Portal for the Moto X and that isn't giving me anything)
Edit: Finally got it to flash the stock image. Didn't help. Factory reset fixed things.
Note: I had this problem and was able to fix it through a factory reset, but I had to do it through minimal adb and fastboot. The bootloader factory reset option didn't work.
I am having the exact same issue. Has anybody had a luck resolving it short of a factory reset?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a bunch people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?