Related
Hi, tried searching my answer, but still not clear as to the answer for my situation, im about to purchase the unlock code for my non DE verizon moto x , code is from someone from china. If i upgrade to 4.4.2 while unlocked bootloader, any way back to 4.2.2 post camera update. Thanks
ericizzy1 said:
Hi, tried searching my answer, but still not clear as to the answer for my situation, im about to purchase the unlock code for my non DE verizon moto x , code is from someone from china. If i upgrade to 4.4.2 while unlocked bootloader, any way back to 4.2.2 post camera update. Thanks
Click to expand...
Click to collapse
Yes and No
No you can not flash the complete 4.2.2 PCU package it will fail because you can't downgrade the bootloader
Yes because you can flash everything but the bootloader and it will take but if you accidentally take a OTA. you will brick your device.
but if you are able to unlock your bootloader then why would you want to downgrade. with a unlocked bootloader you will be able to root 4.4.2 with no issues
because when I was on 4.4, I had some battery consumption and heating issues also bluetooth was not perfect, I just wanted to make sure I have a way back To 4.2.2
also, not being able to downgrade the bootloader, in which way does this affect me going back to four point 4.2.2?
Your phone will work fine but like i said if you ever take a ota it will brick your phone
Sent from my XT1056 using XDA Premium 4 mobile app
dray_jr said:
Your phone will work fine but like i said if you ever take a ota it will brick your phone
Sent from my XT1056 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ota will brick, will be able to rsd to 4.4 or 4.4.2 if wanted?
Yup that is correct
Sent from my XT1056 using XDA Premium 4 mobile app
ericizzy1 said:
ota will brick, will be able to rsd to 4.4 or 4.4.2 if wanted?
Click to expand...
Click to collapse
No. Once you start mixing bootloader versions with system file versions (i.e. 4.4.2 bootloader with 4.2.2 system files), RSD Lite won't work. You will have to use a command line and mfastboot.exe to manually flash each partition.
And I actually tried to run 4.2.2 (post camera update) system files with a 4.4.2 bootloader and it would not boot; however, 4.4 system files do work with a 4.4.2 bootloader.
This has actually been discussed at great length and detail in this forum and A LOT of people were bricking their phones playing around with bootloader versions, just like you are talking about doing. At one point there was a sticky dedicated to it, but its since disappeared from the board for some reason.
To put it simply, please don't start mixing bootloader versions with system files. If you like 4.2.2, don't upgrade to 4.4.2. If you are on 4.4, then you can still downgrade to 4.2.2 (post camera update version). Do that and stay there. But if you upgrade to 4.4.2, don't fool around with it and start trying to downgrade. There is no point, and you will likely end up bricking your phone.
It's your phone, so do what you want, but you have been warned (by someone with personal experience by the way). If you do brick it, please don't start another "OMG! HELP ME!! I BRICKED MY PHONE!!" thread. There's plenty of those already floating around here. :good:
I was on verizon galaxy nexus for over two years. I wanted better radio performance, so i got a moto x. Nexus bootloader was unlocked and I was a bit of a crackflasher.
I have unlocked bootloader on moto x and installed twrp and supersu.
I did all this before taking firmware update, so I can see how it runs on 4.2.2. I ran it awhile and wanted to try kk out. I downloaded the ota update and went to have it autoflash, but instead, it rebooted into twrp.
so, I have downloaded rsdlite (i used to have a droid x, so i am familiar) and will get the 4.4.2 firmware downloaded too.
Q: can i flash aosp 4.4.2 roms with my x in it's 4.2.2 state or do i need the 4.4.2 update first?
Q: are there standalone radio (baseband) files around I can download and flash in recovery?
Thx!
RSDLite when you have an unlocked bootloader?
Grab the 4.4.2 sbf, extract the individual imgs, then flash with fastboot.
You will find the moto x is no nexus I'm afraid. Not a flashaholics phone for sure. There's just a few ROMs....not a lot of mods, and whatever you do, once on 4.4.2....never downgrade. It can cost you your phone. Dev edition or not.
Just a heads up!!
BTW....not knocking it....I still recommend it to everyone I know!!! Except the couple rooting and tinkering types....then I recommend the N5 hands down.
update : upgraded to kk firmware with rsdlite. bootloader still unlocked. I am on Eclipse now and enjoying it.
Sent from my XT1060 using Tapatalk
kochoid said:
update : upgraded to kk firmware with rsdlite. bootloader still unlocked. I am on Eclipse now and enjoying it.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I moved from a galaxy nexus last fall to the X. I definitely flashed constantly... now with an unlocked bootloader (MotoMaker!) I don't have the need. Xposed is all you really need to get features you want, unless you just like to tinker.
I purchased it in Aurora, CO from a buddy that said he was using it on T-Mobile.
Everything works great even the LTE on T-Mobile, but from what I read the XT1058 was AT&T's variant of the Moto X and wasnt supposed to support the T-Mobile LTE bands.
I did a little research & found out that it is not a AT&T branded XT1058 and is actually from another country.
After checking the Moto X wiki i came to the conclusion that its the XT1058 model from TIM Brazil
I used it the whole day and noticed an app called "BR Apps" that had a brazil flag in the icon that i just can't uninstall. I can disable it but i want it gone.
I want to root this phone and fiddle with it, but don't know what will work with it.
The bootloader is locked and not sure if it is safe for me to start trying to root this thing.
My biggest question is if it is safe to root this XT1058 the same way as the AT&T or other carrier moto x?
Heres some more info on it.
"Android Version"
4.4.2
"Baseband Version"
MSM8960PRO_BP-2323.031.111.00R
"System Version"
161.44.26.ghost_row.TIM.en.BR
"Build number"
KXA20.16-1.26
tKoHaXoR said:
I purchased it in Aurora, CO from a buddy that said he was using it on T-Mobile.
Everything works great even the LTE on T-Mobile, but from what I read the XT1058 was AT&T's variant of the Moto X and wasnt supposed to support the T-Mobile LTE bands.
I did a little research & found out that it is not a AT&T branded XT1058 and is actually from another country.
After checking the Moto X wiki i came to the conclusion that its the XT1058 model from TIM Brazil
I used it the whole day and noticed an app called "BR Apps" that had a brazil flag in the icon that i just can't uninstall. I can disable it but i want it gone.
I want to root this phone and fiddle with it, but don't know what will work with it.
The bootloader is locked and not sure if it is safe for me to start trying to root this thing.
My biggest question is if it is safe to root this XT1058 the same way as the AT&T or other carrier moto x?
Heres some more info on it.
"Android Version"
4.4.2
"Baseband Version"
MSM8960PRO_BP-2323.031.111.00R
"System Version"
161.44.26.ghost_row.TIM.en.BR
"Build number"
KXA20.16-1.26
Click to expand...
Click to collapse
The AT&T Moto X (and ALL the XT1058 variants) DOES support all the LTE bands that T-Mobile uses. It does NOT support the AWS band which T-Mobile uses for HSPA/HSPA+
All of the XT1058 variants have the same frequency bands....otherwise the FCC would require a different FCC ID.
Anyways, its GREAT that you have a non-U.S. XT1058, because you SHOULD be able to unlock the bootloader from Motos website!!! (AT&T XT1058s can NOT be unlocked through Moto....AT&T won't allow them to give out the unlock codes for the AT&T variants)
If you want root, unlock your bootloader and flash TWRP (which will root the device). Then you're all set! No crazy exploits needed......and you'll be safe with future versions because you won't be using a root 'exploit' that can be patched.
Unlock here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Make sense?
Makes perfect sense. I upgraded from a t-mobile galaxy s3 that was easier to root because of odin software and wasn't 100% sure where I would even start rooting this moto. You pretty much cleared everything up for me. This xt1058 is one of the good ones is what you are saying and its boot loader is ublockable. As far as baseband it should remain the same? Can I flash xt1058/xt1053 ROMs without running into weird issues or should I treat this device like any other US version?
Sent from my XT1058 using XDA Premium 4 mobile app
tKoHaXoR said:
Makes perfect sense. I upgraded from a t-mobile galaxy s3 that was easier to root because of odin software and wasn't 100% sure where I would even start rooting this moto. You pretty much cleared everything up for me. This xt1058 is one of the good ones is what you are saying and its boot loader is ublockable. As far as baseband it should remain the same? Can I flash xt1058/xt1053 ROMs without running into weird issues or should I treat this device like any other US version?
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep, pretty much. One of the 'good' ones
It *should* be bootloader unlockable. You will have to try the moto website I linked to see for sure.
You can flash any XT1058 rom safely....the Rogers Canada version seems to be a favorite around here. Some users have reported flashing the XT1053 rom without any issues as well. The XT1058 has 2 additional LTE bands over and above the 1053, and we aren't sure if you 'lose' these bands by flashing the 1053 rom though. This really isn't an issue though, because those 2 LTE bands aren't even used in the U.S. right now.
Do not flash one of the CDMA (verizon, sprint, etc) roms though...
If you flash a different carrier rom you should flash the entire rom (baseband and all). Its not recommended to mix different roms and basebands....and of course you HAVE to be bootloader unlocked -before- you can flash another carrier's rom
samwathegreat said:
Yep, pretty much. One of the 'good' ones
It *should* be bootloader unlockable. You will have to try the moto website I linked to see for sure.
You can flash any XT1058 rom safely....the Rogers Canada version seems to be a favorite around here. Some users have reported flashing the XT1053 rom without any issues as well. The XT1058 has 2 additional LTE bands over and above the 1053, and we aren't sure if you 'lose' these bands by flashing the 1053 rom though. This really isn't an issue though, because those 2 LTE bands aren't even used in the U.S. right now.
Do not flash one of the CDMA (verizon, sprint, etc) roms though...
If you flash a different carrier rom you should flash the entire rom (baseband and all). Its not recommended to mix different roms and basebands....and of course you HAVE to be bootloader unlocked -before- you can flash another carrier's rom
Click to expand...
Click to collapse
Dude thanks a ton! I went to the regular moto website to try and unlock the bootloader but it was a no go. Then i went thru the brazilian site and it worked! Got the booloader unlocked and will flash my first rom in a matter of minutes.
tKoHaXoR said:
Dude thanks a ton! I went to the regular moto website to try and unlock the bootloader but it was a no go. Then i went thru the brazilian site and it worked! Got the booloader unlocked and will flash my first rom in a matter of minutes.
Click to expand...
Click to collapse
Great! If you get an error when flashing to a different carrier rom, let me know and I'll help you get past it.
Also, if you are planning on flashing the 1053 ROM and updating to 4.4.3, you will need to use a new version of TWRP and SuperSU. See here:
http://forum.xda-developers.com/mot...unlocked-twrp-2-6-3-1-android-t2534850/page48
samwathegreat said:
Great! If you get an error when flashing to a different carrier rom, let me know and I'll help you get past it.
Also, if you are planning on flashing the 1053 ROM and updating to 4.4.3, you will need to use a new version of TWRP and SuperSU. See here:
http://forum.xda-developers.com/mot...unlocked-twrp-2-6-3-1-android-t2534850/page48
Click to expand...
Click to collapse
Just flashed the 2.7.0.0 TWRP recovery and installed SuperSu, did a TWRP backup of my system and flashing the T-Mobile stock 4.4.3 Rom from here.
http://forum.xda-developers.com/moto-x/development/rom-stock-flashable-t-mobile-t2773675
Hope all goes well!
EDIT: ALL WENT WELL. Brazil XT1058 Bootloader unlocked, TWRP 2.7.0.0, flashed with XT1053 4.4.3 rooted rom! samwathegreat you are the man!
Hi guys,
I live in Brazil and got a Moto X for my wife, I love it, now considering buy another for myself
She has same version as @tKoHaXoR:
Android Version: 4.4.2
Baseband version: MSM8960PRO_BP_2323.031.111.00R
System version: 161.44.26.ghost_row.TIM.en.BR
Kernel version: 3.4.42-g7a3369f
Build number: KXA20.16-1.26
I'd like to get root and keep the stock ROM, at least for now I won't mess with custom ROMs on it.
My questions:
- once I unlock bootloader and root, I won't get OTA anymore?
- seems 4.4.4 stock is not out for it yet, when it comes I will be able to flash even if I don't get it from OTA?
Sorry it's hard to feel like a noob again, when I did everything possible and flashed dozens of ROMs on my old Galaxy S2
Noed said:
Hi guys,
I live in Brazil and got a Moto X for my wife, I love it, now considering buy another for myself
She has same version as @tKoHaXoR:
Android Version: 4.4.2
Baseband version: MSM8960PRO_BP_2323.031.111.00R
System version: 161.44.26.ghost_row.TIM.en.BR
Kernel version: 3.4.42-g7a3369f
Build number: KXA20.16-1.26
I'd like to get root and keep the stock ROM, at least for now I won't mess with custom ROMs on it.
My questions:
- once I unlock bootloader and root, I won't get OTA anymore?
- seems 4.4.4 stock is not out for it yet, when it comes I will be able to flash even if I don't get it from OTA?
Sorry it's hard to feel like a noob again, when I did everything possible and flashed dozens of ROMs on my old Galaxy S2
Click to expand...
Click to collapse
I'm not 100% sure if it will still get OTA, but most likely you will get a notification on your phone that the update is available. The thing is you will most likely lose root if you accept the OTA update.
I recommend just rooting and installing custom recovery for now and once the update does roll out come back to XDA and look for the rooted 4.4.4 rom and flash it to your device.
Thanks @tKoHaXoR, I unlocked the bootloader yesterday, after messing up a little it's working ok.
Not working great yet, I tried to "integrate updates into system" using Titanium and now "modality services" and "active display" are force closing after boot.
Now trying to find a stock based ROM, it would be nice to have one CWM flashable and deodexed...
Which one did you install?
So, as I understand, there's 2 main types of Moto X: CDMA and GSM
And this XT1058 runs GSM ROMS, so the one from XT1053 should work.
Noed said:
...I'd like to get root and keep the stock ROM, at least for now I won't mess with custom ROMs on it.
My questions:
- once I unlock bootloader and root, I won't get OTA anymore?
- seems 4.4.4 stock is not out for it yet, when it comes I will be able to flash even if I don't get it from OTA?
Sorry it's hard to feel like a noob again, when I did everything possible and flashed dozens of ROMs on my old Galaxy S2
Click to expand...
Click to collapse
Once you unlock the bootloader, and root, you'll still get OTA Updates when the phone's carrier pushes them.
As long as you are stock, and haven't modified too much, you can flash the OTA's. You can be rooted. (for more see -> http://mark.cdmaforums.com/MotoX-OTA.html )
You can always use RSDLite or mFastboot to flash if the SBF (rom) for your phone/carrier gets leaked and put on http://sbf.droid-developers.org/phone.php?device=0 (this site is neither owned, maintained, nor operated by Motorola). They don't have the OTA update files, just the full rom. Based on you earlier posting System version: 161.44.26.ghost_row.TIM.en.BR You have an XT1058 from TIM Brazil.
If you haven't received the OTA yet, but are stock (including stock recovery) and someone shares the OTA zip file for your phone and its carrier, you can manually install it.
Noed said:
Thanks @tKoHaXoR, I unlocked the bootloader yesterday, after messing up a little it's working ok.
Not working great yet, I tried to "integrate updates into system" using Titanium and now "modality services" and "active display" are force closing after boot.
Now trying to find a stock based ROM, it would be nice to have one CWM flashable and deodexed...
Which one did you install?
So, as I understand, there's 2 main types of Moto X: CDMA and GSM
And this XT1058 runs GSM ROMS, so the one from XT1053 should work.
Click to expand...
Click to collapse
Kind of, but not exactly...
We usually don't recommend flashing the ROM from one model/carrier onto another (like flashing an ATT XT1058 with a T-MObile XT1053) because there are risks something could go wrong. That doesn't mean you can't, just means there is a chance you could mess your phone up either in flashing the other rom, or when you try and flash back to stock.
If you are looking for 3rd party or "after market" roms, like CM or such, then yes, usually they don't include modems and such, making them somewhat model independent. (SO you could flash the same CM ROM for GSM on an XT1052, XT1053, XT1058, etc.)
http://forum.xda-developers.com/showthread.php?t=2773675
[ROM][4.4.3]Stock Flashable of the T-Mobile
That is the one you will want to flash
Sent from my XT1053 using XDA Premium 4 mobile app
Thanks again for the help, I flashed this one and worked great:
http://forum.xda-developers.com/mot...0-google-play-edition-4-t2715488/post54328873
I posted this on reddit before the update was out but didn't get much info. Hopefully I find better luck here.
So I bought a Moto X 2013 in January. It was fairly new. The person I bought it from had unlocked the bootloader, flashed TWRP and rooted the phone.
Later I noticed the model number on the back of the phone is XT1049, ( Republic Wireless version) but the actual version running on the phone is XT1053 (T-mobile version). Also noticed that MotorolaOTA is disabled. The phone is also SIM-unlocked because I use a GSM SIM with it.
What I want to find out is how exactly to go about updating to 5.1?
I keep reading that flashing another carrier's firmware could brick you device. In this case, will flashing the xt1053 stock firmware on a phone that is originally xt1049 brick my phone?
Do I download and flash the XT1053 ota zip ? Do I disable MotorolaOTA?
I have X-posed installed as well. I would like o know how to disable that completely too .
So what's the safest way for me to upgrade from 4.4.2 to 5.1?
Thanks
kwvme said:
I posted this on reddit before the update was out but didn't get much info. Hopefully I find better luck here.
So I bought a Moto X 2013 in January. It was fairly new. The person I bought it from had unlocked the bootloader, flashed TWRP and rooted the phone.
Later I noticed the model number on the back of the phone is XT1049, ( Republic Wireless version) but the actual version running on the phone is XT1053 (T-mobile version). Also noticed that MotorolaOTA is disabled. The phone is also SIM-unlocked because I use a GSM SIM with it.
What I want to find out is how exactly to go about updating to 5.1?
I keep reading that flashing another carrier's firmware could brick you device. In this case, will flashing the xt1053 stock firmware on a phone that is originally xt1049 brick my phone?
Do I download and flash the XT1053 ota zip ? Do I disable MotorolaOTA?
I have X-posed installed as well. I would like o know how to disable that completely too .
So what's the safest way for me to upgrade from 4.4.2 to 5.1?
Thanks
Click to expand...
Click to collapse
Flash back to stock 4.4.2 then OTA to 4.4.4.
SR3TLAW said:
Flash back to stock 4.4.2 then OTA to 4.4.4.
Click to expand...
Click to collapse
I've been asked not to OTA.
Apparently the guy "flashed the Retail US factory image and flashed the Republic Wireless/Sprint radio files for the modem to work"
Even if I were to do this, which stock firmware would I use, the XT1049 or the XT1053 one?
kwvme said:
I've been asked not to OTA.
Apparently the guy "flashed the Retail US factory image and flashed the Republic Wireless/Sprint radio files for the modem to work"
Even if I were to do this, which stock firmware would I use, the XT1049 or the XT1053 one?
Click to expand...
Click to collapse
Because the OTA is based off the strings contained in the /system partition, it would get the Retail US OTA.
BUT If you have mixed up parts of modems and roms, DO NOT Take an OTA.
First it will likely fail the pre-flash validation checks (due to wrong parts being on there), next if for some reason it doesn't fail and proceeds with flashing, you'll end up with ALL parts of the Retail XT1053 rom on there.
Finally, since its an XT1049, the SIM UNLOCK hack was likely used, and I'm not sure if that would survive flashing. And its unknown at this time if it will survive upgrade to Lollipop.
KidJoe said:
Because the OTA is based off the strings contained in the /system partition, it would get the Retail US OTA.
BUT If you have mixed up parts of modems and roms, DO NOT Take an OTA.
First it will likely fail the pre-flash validation checks (due to wrong parts being on there), next if for some reason it doesn't fail and proceeds with flashing, you'll end up with ALL parts of the Retail XT1053 rom on there.
Finally, since its an XT1049, the SIM UNLOCK hack was likely used, and I'm not sure if that would survive flashing. And its unknown at this time if it will survive upgrade to Lollipop.
Click to expand...
Click to collapse
So you're saying I'm stuck on 4.4.2?
I have attached a pic of my about phone section. The baseband version is different from other XT1053s.
Someone said I should be able to flash just the system partition without affecting anything else. How true is that? They also suggested flashing the RW 4.4.4 image and wait to OTA. But I was concerned about GSM usability with that.
Finally, it would seem my best option would be to flash the TWRP xt1053 backup, but the reports of bugs is putting me off.
I'd really like to get lollipop and remain using the xt1053 software if I can. Thanks
kwvme said:
So you're saying I'm stuck on 4.4.2?
I have attached a pic of my about phone section. The baseband version is different from other XT1053s.
Someone said I should be able to flash just the system partition without affecting anything else. How true is that? They also suggested flashing the RW 4.4.4 image and wait to OTA. But I was concerned about GSM usability with that.
Finally, it would seem my best option would be to flash the TWRP xt1053 backup, but the reports of bugs is putting me off.
I'd really like to get lollipop and remain using the xt1053 software if I can. Thanks
Click to expand...
Click to collapse
Because you have an XT1049 model and are trying to use XT1053 firmware it gets complicated. Also, the XT1049 hardware was SIM/Carrier locked, and there was a hack to unlock it (it was the only way to sim unlock it). I don't know if that SIM unlock hack survives flashing different versions, etc. So I really don't want to advise you and have you get SIM locked.
If the baseband is different than other XT1053's its possible that you are runing a mix of XT1049 radios/modems with other parts of the XT1053 rom. So taking an upgrade in this state is risky. It could fail or even brick your phone. A mix like that is probably why the Moto OTA updater was disabled/frozen.
I personally haven't had much luck mixing parts from roms for two different phones, and I usually don't advise it due to potential side effects, as well as potential issues when trying to flash back to the stock rom for your model/carrier.
As for flashing just the /System partition, that is pretty much what restoring the lollipop backups are doing. At that point, /SYSTEM doesn't match the partition table, bootloader, trusted zone, and other components which could also cause other bugs while running (speaker phone bug reported by those using the TWRP lollipop back apparently doesn't exist on those that took the full update).
My advise... stay put.
If you really want to upgrade... WAIT. First ask in the thread talking about the Sprint/RW SIM Unlock Crack if there are any conditions on upgrading after you SIM unlock. I would also ask about any risks or impacts from flashing back to STOCK RW ROM in that thread, or using another carrier's rom. Finally, I'd wait on flashing anything until BOTH Republic Wireless and XT1053 5.1 SBF files are available... and then proceed. You may need to flash RW 5.1, then flash /system from XT1053's 5.1 rom. BUT i'm not 100% sure it will work, and wont SIM unlock you, so I'm not saying you'll be successful (because I don't know)
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
there is a high risk of bricking your device while downgrading http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202
It's highly risky to downgrade but if you persist just make sure your bootloader and partition table is not the one that got upgtaded with the latest 5.1 rom. If it is the latest then don't do it.
Sent from my Moto X using Tapatalk
You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.
ong14 said:
You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.
Click to expand...
Click to collapse
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.
md07 said:
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.
Click to expand...
Click to collapse
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.
ong14 said:
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.
Click to expand...
Click to collapse
Do you use fastening to flash fw? And you flash all part inside fw? Include motorboat and got... ? After flash, do you make unlock network again ?
I used mfastboot to flash all CGs to my phone. But you may try to skip some CGs like KidJoe said.
Every time when you return to stock or do a hard reset, you have to do the SIM-unlock process again.
harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.
KidJoe said:
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.
Click to expand...
Click to collapse
Yea i think i will wait for the full sbf 5.1 for verizon, i dont want to take the chance.
Thank you all for your help when the 5.1 update will come to the verizon you think?