Related
GOOD NEWS! Unless your power button does not work, the Revolution IS unbrickable! After searching far and wide for a method to unbrick my phone from the lg boot screen, I found a way! By now you have hopefully been to all of the other threads and downloaded and installed LGNPST and all of that hoopla so I will just post links and not full directions...here we go:
1) Download and install LGNPST and associated files
forum.xda-developers.com/showthread.php?t=1337386
http://forum.xda-developers.com/showthread.php?t=1466655
2) Follow directions all the way through step 11
forum.xda-developers.com/showthread.php?t=1337386
3) Remove your battery and connect your phone via usb (the hard buttons on the bottom of the phone should blink slowly).
**Make sure battery is at least 25% charged
4) Hold down power + vol up.
5) Phone will come on and read "downloading do not remove cord" or something to that nature. Put battery back in.
6) If you followed step 2 correctly, LGNPST will now show an unknown device and will be in emergency phone book mode. Under the emergency tab it will ask you for 1) a .dll file and 2) a phone book. Click on the folder icon next to .dll file and load the VS910.dll from wherever you have it saved. Click on the folder icon next to phone book. Navigate to the folder where you have saved the correct .tot file. in the "file name" box type *.* and hit enter. If you are in the correct folder you should now see the .tot file, click on it then click "save".
7) Back on the LGNPST screen click on start. It should now say MASTERBIN and a percentage ticking up (if not you have done something wrong).
8) once completed commence re-rooting!
forum.xda-developers.com/showthread.php?t=1348557&highlight=root+v7
special thanks to:
mtmichaelson for his awesome root package!!!
jackpot08 for LGNPST
and all of those who have kept the .tot files movin'
I hope this helps!!!
Good post, this method does work as a last resort, but be warned.. flashing a tot file from the emergency download mode like this will most likely get you stuck in "test mode" -- no more usb mass storage (and possibly other problems).
And so far noone knows how to get out of test mode...
All it took was a simple google search...
https://forun.xda-developers.com/showthread.php?t=151279
https://forun.xda-developers.com/showthread.php?t=151279
Sent from my VS910 4G using XDA
un_brickable said:
All it took was a simple google search...
https://forun.xda-developers.com/showthread.php?t=151279
https://forun.xda-developers.com/showthread.php?t=151279
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
Broken link to a "fix" that is more of a bandaid than a fix, as it requires you to downgrade to froyo.
Sent from my VS910 4G using XDA
Yep.. believe me I searched... and searched and searched until my eyes almost popped out of my head
Nonetheless I'll take test mode over a bricked phone with a fresh 2 year contract any day...
Links for this AND instructions are posted in like 3 other threads lol.
Sent from my AXI0M ICS RAZR using tapatalk.
emergency download mode real way
to get the lg to work with lgnpst i had to open the program then with battery out but held to bottom with fingers ready to put in quickly hold vol up then plug usb to computer then slide battery in quickly and hold power button while still holding vol up if anyone is having problems with lg revo and lgnpst send me a message i spent a week doing everything n finally figured it out
mjollnir2012 said:
to get the lg to work with lgnpst i had to open the program then with battery out but held to bottom with fingers ready to put in quickly hold vol up then plug usb to computer then slide battery in quickly and hold power button while still holding vol up if anyone is having problems with lg revo and lgnpst send me a message i spent a week doing everything n finally figured it out
Click to expand...
Click to collapse
You do not have to go through all that if you have the proper drivers.
Sent from my AXI0M ICS RAZR using tapatalk.
Replace your lg revolution for free
Flashing to v4 froyo tot will not leave the the phone in test mode or rooted. If you can get your phone back to froyo with no test mode then you can bring the phone back, and tell them the phone will not update. I have had two phones already and for some reason they will not take the ota updates. The carrier had no idea I rooted/unrooted and flashed oh so many times. Just a suggestion for noobs who do not want to spend hours or days or maybe even weeks trying to get this phone to work correctly.
Help please
I have tried above and I cant seem to get drivers to install properly
The only one that installs properly is USB Composite device and the LGE CDMA USB does not install properly. I flashed wrong recovery from ROM Manager and stuck at LG screen. LGNPST does not capture my phone. What else should or can I do besides take it in?
drivers
i put both LGAndroidDriver_Ver_1.0_All and LG VZW_United_WHQL_v2.4.1 and they installed correctly is ur phone stuck or can it boot
unbrick Lg revo info
I downloaded the files and had an issue extracting the rom .tot file , How do I extract the .tot so I can use them with the LGNPST.
I have followed the directions and found The LGNPST program comes up blank with no phone info. I am guessing it is because of the .tot files not being "extracted " . I sure would appreciate some help on this one. My phone is bricked.
tommy_guns said:
I downloaded the files and had an issue extracting the rom .tot file , How do I extract the .tot so I can use them with the LGNPST.
I have followed the directions and found The LGNPST program comes up blank with no phone info. I am guessing it is because of the .tot files not being "extracted " . I sure would appreciate some help on this one. My phone is bricked.
Click to expand...
Click to collapse
When you download the .tot file, it should be a zip file. Just extract the zip file using WinRAR or 7zip to somewhere it's easy to find.
If it's not a zip file, then chances are it's already extracted and you don't need to do it.
If LGPNST is coming up blank even though your phone is plugged in, then you need to install the correct drivers or try a different USB cable or a different USB port because it means LGPNST can't connect to your device.
spc_hicks09 said:
When you download the .tot file, it should be a zip file. Just extract the zip file using WinRAR or 7zip to somewhere it's easy to find.
If it's not a zip file, then chances are it's already extracted and you don't need to do it.
If LGPNST is coming up blank even though your phone is plugged in, then you need to install the correct drivers or try a different USB cable or a different USB port because it means LGPNST can't connect to your device.
Click to expand...
Click to collapse
Forgot if it's in Internet Connection and USB Debugging Enabled too.
Gel Pen6 said:
Forgot if it's in Internet Connection and USB Debugging Enabled too.
Click to expand...
Click to collapse
Sure did, thank you! Yes make sure you have selected the option for "Internet Connection" and USB Debugging is enabled.
unbrick Lg revo info
I can't get it to internet connection because i can't boot into anything . It is like it is stuck at boot. also the .tot files do not extract with any zip program . I have loaded the vs910.dll and the drivers onto my computer but the LGNPST program still not recognizing any phone. for that matter the the computer has not recognized the phone , maybe due to I cannot set internet connection mode. The USB De bug was enabled before all this started.
The whole situation of not completing boot came about when I happened defrosted the astro file manager app. Help
tommy_guns said:
I can't get it to internet connection because i can't boot into anything . It is like it is stuck at boot. also the .tot files do not extract with any zip program . I have loaded the vs910.dll and the drivers onto my computer but the LGNPST program still not recognizing any phone. for that matter the the computer has not recognized the phone , maybe due to I cannot set internet connection mode. The USB De bug was enabled before all this started.
The whole situation of not completing boot came about when I happened defrosted the astro file manager app. Help
Click to expand...
Click to collapse
u gotta open lgnpst then plug your phone on to be put on emergency download mode also the .tot file is already extracted like was already said in a previous post and make sure u register the .dll
Evnoth said:
Flashing to v4 froyo tot will not leave the the phone in test mode or rooted. If you can get your phone back to froyo with no test mode then you can bring the phone back, and tell them the phone will not update. I have had two phones already and for some reason they will not take the ota updates. The carrier had no idea I rooted/unrooted and flashed oh so many times. Just a suggestion for noobs who do not want to spend hours or days or maybe even weeks trying to get this phone to work correctly.
Click to expand...
Click to collapse
I had a few issues with this namely Tots not loading right getting perm black screen, I pulled the batt, put it back in and did a hard reset (wipe) back to stock then rooted added CWM with MT's hlep of course and am now re flashing gingervolt to broken out 1.1 and still puts me back in test mode, even restoring older backups put me in test mode, only v4 seems to work....WHY?
Thanks I finally got it back running with the LGNPST , tot version 7 . The phone works now but I also am in test mode and cannot switch my usb. Question, Can I use The LGNPST and select tot version 4 and install that as before to get my usb back. And if so will I then be able to get OTA updates or will I have to return it to store for that. I hate being stuck in test. What happens with phone stuck in test ?
tommy_guns said:
Thanks I finally got it back running with the LGNPST , tot version 7 . The phone works now but I also am in test mode and cannot switch my usb. Question, Can I use The LGNPST and select tot version 4 and install that as before to get my usb back. And if so will I then be able to get OTA updates or will I have to return it to store for that. I hate being stuck in test. What happens with phone stuck in test ?
Click to expand...
Click to collapse
You'll be able to get OTAs but you'll still be stuck in test mode. To this day there is no known method (yet) to get out of test mode. Someone correct me if I'm wrong but the only difference I know of with test mode is that you can't transfer files via USB cable anymore. You have to either use adb or an adapter for your microSD card to your PC.
Sent from my DROID RAZR using Tapatalk
my phone is totally dead after i trying to root using smart flash tool....im install .kdz file n the process is complete...
after that im not see my phone is working....
try to turn on not working..
SoD: Screen of Death, which means, that your phone is frozen, and you can't do anything at all. Often combined, with a heating up, of the device.
plesss hellpp!! :crying:
(sorry for bad english)
mrapeace said:
my phone is totally dead after i trying to root using smart flash tool....im install .kdz file n the process is complete...
after that im not see my phone is working....
try to turn on not working..
SoD: Screen of Death, which means, that your phone is frozen, and you can't do anything at all. Often combined, with a heating up, of the device.
plesss hellpp!! :crying:
(sorry for bad english)
Click to expand...
Click to collapse
Is SW Update still accessible?
Sent from my LG-P970
xonar_ said:
Is SW Update still accessible?
Sent from my LG-P970
Click to expand...
Click to collapse
no...because my phone is like phone without battery....i try to connect usb cable use the step volume up + power button...nothing appear....
mrapeace said:
no...because my phone is like phone without battery....i try to connect usb cable use the step volume up + power button...nothing appear....
Click to expand...
Click to collapse
Only Volume UP and plug in USB, NO POWER BUTTON!
Try again and report.
You're tried?
N00BY0815 said:
Only Volume UP and plug in USB, NO POWER BUTTON!
Try again and report.
Click to expand...
Click to collapse
nothing appear.... if we try to root our phone is that damage our phone hardware??
mrapeace said:
nothing appear.... if we try to root our phone is that damage our phone hardware??
Click to expand...
Click to collapse
No. Not unless you throw your phone at the wall halfway through the processes.
Sent from my LG-P970
xonar_ said:
No. Not unless you throw your phone at the wall halfway through the processes.
Sent from my LG-P970
Click to expand...
Click to collapse
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
mrapeace said:
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
Click to expand...
Click to collapse
Maybe your USB port is at the cell is broke... Or did you already try, to plug in the cable without battery in the phone? Did you try to directly flash a kdz file with smartflash, or did you unpack it to bin/fls files before?
mrapeace said:
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
Click to expand...
Click to collapse
The charge images are inside the boot partition if you overwrote that partition it would not show images when charging. What OS is your PC running? If its Linux run lsusb or cat /proc/devices to see if it detects it. Windows doesn't play nice with bairly working devices. I have no idea about how Mac handles it.
Sent from my LG-P970
Same Here
Hello,
I have exactly the same problem as statet above. My phone is totally black.
nothing happens when i put it on charger,
nothing happens when i hold power button,
nothing happens when i hold power buton + down volume,
nothing happens when i remove battery, hold down volume and plug in usb.
My phone worked fine, i have used like 3 or 4 roms. i made a backup of a ROM.
This went totaly succesfull, just as it did before a couple of times.
After this backup it rebooted succesfully to my CM10 nightly.
Then it said my SD card got dismounted and i opend ROM manager and clicked on reboot to recovery.
and then i got in the situation where i am now.
can anyone please help me? im pretty scared that i bricked my phone.
Which is kinda odd because it wasn't aborted during any flash or backup.
Hardware cannot be damaged right ?
N00BY0815 said:
Maybe your USB port is at the cell is broke... Or did you already try, to plug in the cable without battery in the phone? Did you try to directly flash a kdz file with smartflash, or did you unpack it to bin/fls files before?
Click to expand...
Click to collapse
yes...i already did to plug in the cable without battery in the phone...and that why i got the problem when i convert a kdz file to bin and fls files then i flash it...the process is complete...after that i look my phone totally black...no screen respon....
xonar_ said:
The charge images are inside the boot partition if you overwrote that partition it would not show images when charging. What OS is your PC running? If its Linux run lsusb or cat /proc/devices to see if it detects it. Windows doesn't play nice with bairly working devices. I have no idea about how Mac handles it.
Sent from my LG-P970
Click to expand...
Click to collapse
i running Window OS...i put charger pluq also not show anything...no screen light...no battery images display....nothing at all...
mrapeace said:
i running Window OS...i put charger pluq also not show anything...no screen light...no battery images display....nothing at all...
Click to expand...
Click to collapse
I would recommend sending it into repair shop. At this point we can't do anything if SW update mode is nor accessible. I've been working on a way to recover with shot bootloader but to no avail.
Sent from my LG-P970
hello
i have bricked my lg p880 but i cant get it out.
I have tried everything.
Can somebody please help me?
Thanks
Im really desperate
tell more
need more info
whats phone situation
judodave said:
hello
i have bricked my lg p880 but i cant get it out.
I have tried everything.
Can somebody please help me?
Thanks
Im really desperate
Click to expand...
Click to collapse
OK, lets do it...
First you'll need the .kdz file. The firmware to flash it. Click here: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10F_00/V10F_00.kdz
Next, the programs, here: http://www.4shared.com/rar/Re4VCOAS/kdz-update.html
Assuming that you already have the LG drivers installed...
1 >>>>> copy the V10F_00.kdz to the folder that you download (kdz-update).
2 >>>>> install "msxml" from the "kdz-update" folder.
3 >>>>> run "Windows Enabler" from the "kdz-update" folder, it should appear an icon on the right/bottom of your screen, if not near the others in the taskbar, you need to click on it and you should see "ON" on that icon.
4 >>>>> run "UpTestEX_mod2_marwin" from the "kdz-update" folder.
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
On the field "Version" (at the left) type "V10F_00".
On the field "Select model .dll" browse and select the "P880.dll" from the "kdz-update" folder.
On the field "PhoneMode" select "EMERGENCY".
On the field "Select kdz file" browse and choose the "V10F_00.kdz" that you download and should be in the "kdz-update" folder.
5 >>>>> with your phone "OFF" and the USB cable connected to the PC, press "VOL-" and connect the cable to the phone untill it turns "ON" in "S/W Upgrade".
6 >>>>> Now click on "Start Upgrade" in "UpTestEX_mod2_marwin". As soon as you see some progress in the log, put the battery on the phone, carefull to don't let it drop.
Wait until the phone reboot by it self and it should be all.
Let us know if it worked or not and, or, if you have any other problems.
Good luck!
RuedasLocas said:
OK, lets do it...
First you'll need the .kdz file. The firmware to flash it. Click here: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10F_00/V10F_00.kdz
Next, the programs, here: http://www.4shared.com/rar/Re4VCOAS/kdz-update.html
Assuming that you already have the LG drivers installed...
1 >>>>> copy the V10F_00.kdz to the folder that you download (kdz-update).
2 >>>>> install "msxml" from the "kdz-update" folder.
3 >>>>> run "Windows Enabler" from the "kdz-update" folder, it should appear an icon on the right/bottom of your screen, if not near the others in the taskbar, you need to click on it and you should see "ON" on that icon.
4 >>>>> run "UpTestEX_mod2_marwin" from the "kdz-update" folder.
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
On the field "Version" (at the left) type "V10F_00".
On the field "Select model .dll" browse and select the "P880.dll" from the "kdz-update" folder.
On the field "PhoneMode" select "EMERGENCY".
On the field "Select kdz file" browse and choose the "V10F_00.kdz" that you download and should be in the "kdz-update" folder.
5 >>>>> with your phone "OFF" and the USB cable connected to the PC, press "VOL-" and connect the cable to the phone untill it turns "ON" in "S/W Upgrade".
6 >>>>> Now click on "Start Upgrade" in "UpTestEX_mod2_marwin". As soon as you see some progress in the log, put the battery on the phone, carefull to don't let it drop.
Wait until the phone reboot by it self and it should be all.
Let us know if it worked or not and, or, if you have any other problems.
Good luck!
Click to expand...
Click to collapse
The phone boots up but stucks at the lg logo. With 'select type: CMDA (smartphone wm) the log stops at '13:41:32 : 3GQCT : wParam = 2001, lParam = 0'. It never says complete. And with 'Select type: 3GQCT (smartphone wm) it gives an unpacking error.
Its very anoying.
judodave said:
The phone boots up but stucks at the lg logo. With 'select type: CMDA (smartphone wm) the log stops at '13:41:32 : 3GQCT : wParam = 2001, lParam = 0'. It never says complete. And with 'Select type: 3GQCT (smartphone wm) it gives an unpacking error.
Its very anoying.
Click to expand...
Click to collapse
Forgot to tell you, everytime you need to use the flash tool you need to close it and restart it again.
That unpacking error is because of temp. files. The program unpack the kdz file to another one where is the .dll and the .dz, doing that twice it uses to have that error.
What RuedasLocas said is correct however this:
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
Isn't. Keep the phone type set to 3GQCT.
XperiaPlayer said:
What RuedasLocas said is correct however this:
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
Isn't. Keep the phone type set to 3GQCT.
Click to expand...
Click to collapse
thanks but it didn't work. Still stuck on lg logo without boot animation :'(
judodave said:
thanks but it didn't work. Still stuck on lg logo without boot animation :'(
Click to expand...
Click to collapse
@judodave, try first flash the V10A version.
My first flash went wrong and I was going crazy around the V10C and only after I flash with the V10A I was able to re-flash with the V10F.
Maybe it works with you to... at least I hope so.
Here is the link: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10A_00/V10A_00.kdz
I'll flash mine (later of course) just to post a damn video of how I do it.
Good luck once more.
RuedasLocas said:
@judodave, try first flash the V10A version.
My first flash went wrong and I was going crazy around the V10C and only after I flash with the V10A I was able to re-flash with the V10F.
Maybe it works with you to... at least I hope so.
Here is the link: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10A_00/V10A_00.kdz
I'll flash mine (later of course) just to post a damn video of how I do it.
Good luck once more.
Click to expand...
Click to collapse
thanks but didn't work either/ i shall try V10C_00 as of it came out off the box with V10C i beleive. Wish me luck :good:
(edit: I meant V10D sorry. But i will try V10B too.)
judodave said:
thanks but didn't work either/ i shall try V10C_00 as of it came out off the box with V10C i beleive. Wish me luck :good:
(edit: I meant V10D sorry. But i will try V10B too.)
Click to expand...
Click to collapse
nothing works. It wont unbrick
judodave said:
nothing works. It wont unbrick
Click to expand...
Click to collapse
You'll do it. From time to time someone appears with a phone like yours. For sure is something escaping and we just don't figure out what it is.
When we start to do the same thing over and over again, we use to forgot some small procedures.
Don't worry, one of these days you'll make it.
RuedasLocas said:
You'll do it. From time to time someone appears with a phone like yours. For sure is something escaping and we just don't figure out what it is.
When we start to do the same thing over and over again, we use to forgot some small procedures.
Don't worry, one of these days you'll make it.
Click to expand...
Click to collapse
Thanks for your help. I think I am going to send the phone to lg and hope for the best. I need the phone now. So waiting is no option. Agian thanks for your help.
unbrick booting problem stuck with lg screen
hello sir just yesterday i tried to downgrade my lg p880, and while the process i dont know what went wrong n it got stuck in lg screen, m a noob i tried all options mentioned here but i got no success, then i tried this it worked for me, i successfully got my phone working to stock without data loss,but u need lg pc suite, installed in ur pc u can get that from lg web site,
step 1:- keep ur phone off and connect ur phone by holding vol - key, it will show u software update
step 2:- then open lg pc suite
step 3:- click on device then select emergency firmware recovery
step 4:- u will come with notification u have to click ok
step 5:-then u will see lg mobile support tool there select ur country and install drivers
step 6:- then it will show ur phone connected but it may say ur phone as already updated software etc, but dont worry it will update it then leave it it will start downloading firmware and once its over phone will reboot normally, u got ur phone back, working
Thanks.. It works
riks4039 said:
hello sir just yesterday i tried to downgrade my lg p880, and while the process i dont know what went wrong n it got stuck in lg screen, m a noob i tried all options mentioned here but i got no success, then i tried this it worked for me, i successfully got my phone working to stock without data loss,but u need lg pc suite, installed in ur pc u can get that from lg web site,
step 1:- keep ur phone off and connect ur phone by holding vol - key, it will show u software update
step 2:- then open lg pc suite
step 3:- click on device then select emergency firmware recovery
step 4:- u will come with notification u have to click ok
step 5:-then u will see lg mobile support tool there select ur country and install drivers
step 6:- then it will show ur phone connected but it may say ur phone as already updated software etc, but dont worry it will update it then leave it it will start downloading firmware and once its over phone will reboot normally, u got ur phone back, working
Click to expand...
Click to collapse
Thanks.. it works. I just upgraded my lg p880 from v10e to v20a two days a go. Then i rooted the device. Works for two days, then it stuck at boot logo after I restarted the device. Do not know why. So far has been disappointed with the battery performance and the sound quality of this device. Hopefully the new v20a can help improve even just a bit:good:
riks4039 said:
hello sir just yesterday i tried to downgrade my lg p880, and while the process i dont know what went wrong n it got stuck in lg screen, m a noob i tried all options mentioned here but i got no success, then i tried this it worked for me, i successfully got my phone working to stock without data loss,but u need lg pc suite, installed in ur pc u can get that from lg web site,
step 1:- keep ur phone off and connect ur phone by holding vol - key, it will show u software update
step 2:- then open lg pc suite
step 3:- click on device then select emergency firmware recovery
step 4:- u will come with notification u have to click ok
step 5:-then u will see lg mobile support tool there select ur country and install drivers
step 6:- then it will show ur phone connected but it may say ur phone as already updated software etc, but dont worry it will update it then leave it it will start downloading firmware and once its over phone will reboot normally, u got ur phone back, working
Click to expand...
Click to collapse
Hello. For me it`s not working firmware recovery. Tried everything. Nothing was helped. Around 6 ours of playing with the device and nothing. And finally i made it. Restarted my Windows. Killed all background applications like Nokia pc suite, everything. And then worked like a charm.
someone please help me, i was actualizano my lg 4x through lg mobile support too, l gave me an error and now enceindo in any way or sw or anything just when I connect to pc recognize me as apx device. please help.
hello friend, I need urgent help to repair my lg optimus 4x, so i was updating with lg mobile support tool and gave me an error, now only the pc recognizes it as apx device, is the only sign of life it presents, not light does not come in sw or anything. i was reading as desbrickear optimus 2x, http://forum.xda-developers.com/show....php?t=1007825 but not if this tutorial works with optimus 4x, please help ...
hello friend, I need urgent help to repair my lg optimus 4x, so i was updating with lg mobile support tool and gave me an error, now only the pc recognizes it as apx device, is the only sign of life it presents, not light does not come in sw or anything. i was reading as desbrickear optimus 2x, http://forum.xda-developers.com/show....php?t=1007825 but not if this tutorial works with optimus 4x, please help ...
Thank You: This is a GEM to all P880 Newbies
This is a good deed for the effort you put this into such easy steps for beginners to understand..this should be sticky...thanks :good::good:
RuedasLocas said:
OK, lets do it...
First you'll need the .kdz file. The firmware to flash it. Click here: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10F_00/V10F_00.kdz
Next, the programs, here: http://www.4shared.com/rar/Re4VCOAS/kdz-update.html
Assuming that you already have the LG drivers installed...
1 >>>>> copy the V10F_00.kdz to the folder that you download (kdz-update).
2 >>>>> install "msxml" from the "kdz-update" folder.
3 >>>>> run "Windows Enabler" from the "kdz-update" folder, it should appear an icon on the right/bottom of your screen, if not near the others in the taskbar, you need to click on it and you should see "ON" on that icon.
4 >>>>> run "UpTestEX_mod2_marwin" from the "kdz-update" folder.
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
On the field "Version" (at the left) type "V10F_00".
On the field "Select model .dll" browse and select the "P880.dll" from the "kdz-update" folder.
On the field "PhoneMode" select "EMERGENCY".
On the field "Select kdz file" browse and choose the "V10F_00.kdz" that you download and should be in the "kdz-update" folder.
5 >>>>> with your phone "OFF" and the USB cable connected to the PC, press "VOL-" and connect the cable to the phone untill it turns "ON" in "S/W Upgrade".
6 >>>>> Now click on "Start Upgrade" in "UpTestEX_mod2_marwin". As soon as you see some progress in the log, put the battery on the phone, carefull to don't let it drop.
Wait until the phone reboot by it self and it should be all.
Let us know if it worked or not and, or, if you have any other problems.
Good luck!
Click to expand...
Click to collapse
i would say u install lg pc suite again on different pc and try mine procedure m sure it will work as ur drivers r missing thats reason ur not able to go ahead sorry for late reply
Hello guys, i'm new here. First of all english is not my native language so sorry if i make any mystakes.
I flashed my phone to Lollipop. Then i tried to install twrp (with Flashify) recovery so then i could install Xposed... but the thing is that i may have used the wrong file..
My phone doesn't start. The only sign of live that it gives is when i plugged it to the PC, the pc makes the usual sound when you plug a USB. And it shows my phone as a usb with 63MB of storage (obviouly my phone has more storage). And when i go to Disk admin it shows me all the partitios that my phone has.
Also in Devices admin it shows my phone as: LGE AndroidNet USB Serial Port (COM6)
Do you know what can i do to unbrick my phone? :crying::crying:
LG D410H with lollipop 5.0
Did you unlocked the bootloader before flashing twrp?
Did you tried to hold vol + and plug USB cable to enter in download mode?
F. Gacrux said:
Did you unlocked the bootloader before flashing twrp?
Did you tried to hold vol + and plug USB cable to enter in download mode?
Click to expand...
Click to collapse
Hello, thanks for your reply.
Yes i have tried that already. Nothing seems to work :crying:
When i tried Volume up and plug the cable it shows nothing in my phone's screen. Just in my PC i sounds like a disconected or connected device
You probably flashed the wrong bootloader, which is a fatal error.
I know users that managed to recover other phones from this brick with LGBoardDiag as explained in this topic: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
I don't know how to get this TOT file, but the same partitions shown can be retrieved from your KDZ in BIN extension with LGFirmwareExtract, I think it's just a matter of renaming the files.
F. Gacrux said:
You probably flashed the wrong bootloader, which is a fatal error.
I know users that managed to recover other phones from this brick with LGBoardDiag as explained in this topic: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
I don't know how to get this TOT file, but the same partitions shown can be retrieved from your KDZ in BIN extension with LGFirmwareExtract, I think it's just a matter of renaming the files.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/help/bootstack-flash-gone-wrong-t3120536
i have this problem exactly the same
I found this interesting topic, you probably can recover from this brick to allow you to enter in download mode using LGFlashTool (not the one that flashes KDZ) like this: http://forum.xda-developers.com/showthread.php?t=2475045
But we still need this TOT file and the DLL for your D410H that I do not know where to find or to create from the KDZ.
F. Gacrux said:
I found this interesting topic, you probably can recover from this brick to allow you to enter in download mode using LGFlashTool (not the one that flashes KDZ) like this: http://forum.xda-developers.com/showthread.php?t=2475045
But we still need this TOT file and the DLL for your D410H that I do not know where to find or to create from the KDZ.
Click to expand...
Click to collapse
But i can't go download modde :/ my phone does not show anything on it's screen..
i've been trying with this post:
http://forum.xda-developers.com/lg-g2/general/tool-unbrick-lg-g2-qualcomm-9008-board-t3072073
but it gives me the error that appears at the beggining of the thread. I unplugged it, remove battery, then put it back again and reconnect the usb, but the same problem :/ :crying:
also i have found not the TOT file but this thread:
http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
I meant that will lead you to a working download mode, which is enough to restore everything, including partition table.
I have a suggestion, you said Windows detects as a mass storage unit, can you boot Linux and follow this thread http://forum.xda-developers.com/showthread.php?t=2582142 to see if can see all the partitions?
If yes, it's just a matter of extracting the KDZ of your variant and flashing the said partitions to get a working download mode to make a complete kdz flash.
lg l90 405 is believed to be 410 dual sim
hi to all guys, I would like to submit for your ATTENTION What I And Success Knowing and possibly come to restore rate.
I am the owner of an LG L90 model d405n, Wanting to make the Unlock bootloader I used an Application That I would have to just unlock the bootloader and recovery modified Install A.
In the cell AFTER tale reality 'hack And practically dead, he would not turn on even.
I Put in search tool various programs and various vain, the cell showed no signs of life.
Then, Dandolo now hope for him I tried to go for broke, I formatted a low debits and then with an Application (umbrick) I managed to flesciare start and everything else. Now the cell was lit and was anche in update download mode '.
I downloaded the firmware 405 and KDZ I Tried to use the flash tool but the procedure is always blocked at 2% giving an error.
With the instrument of 'LG I discovered sensationally That cell was identified coming D410, exhausted from the various prove not go into port I wanted to download the KDZ model 410D and, come by magic, flash tool worked! I installed the latest version information and cellphone works beautifully!
So now I have a phone with a firmware His (among other things the 410D E anche dual sim).
I would like to restore your system orifginale, That the 405 but I'm afraid to rate other trouble ....
I hope someone can give me a hand ...
LG L90 D410 Totally bricked. Please someone help.
I an LG L90 D410. I tried to install boot loader and after rebooting the phone, it was unusable. It is not showing any QhSUB_BUlk as well as any partition in My Computer. its not showing anything in PC. Please help someone how can i unbrick my phone.
Hello please try to follow this thread http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
This works 100% it helped me unbrick my phone. Hope it will work for you as well
Enviado desde mi LG-D410 usando XDA Forums
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Tikaram22 said:
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Click to expand...
Click to collapse
Flash again the right firmware.
SubwayChamp said:
Flash again the right firmware.
Click to expand...
Click to collapse
i can't bypass the authentication.
device connected and disconnected itself
Tikaram22 said:
i can't bypass the authentication.
device connected and disconnected itself
Click to expand...
Click to collapse
Follow this guide, replace carefully, the specific files that are for your model device, instead of using those that are for that model based guide, i.e. your firmware https://forum.xda-developers.com/t/...india-6s-using-spflash-tool-for-free.4222027/
Computer is showing the device and mtk auth bypass also shows success and sp flash tool is also showing com port but. when i click on download it shows that STATUS_ERROR (0xC00100001)
Tikaram22 said:
Computer is showing the device and mtk auth bypass also shows success and sp flash tool is also showing com port but. when i click on download it shows that STATUS_ERROR (0xC00100001)
Click to expand...
Click to collapse
Just keep it trying, change the port USB, power off your device, then try again, try a different firmware, flash one file by one. This error uses to appear.
Tikaram22 said:
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Click to expand...
Click to collapse
Probably i had a similar problem.
Does your phone screen stays dark and the phone vibrates shortly each 20 sec? And you don't see any device when connect to PC over USB?
In my case when i held VOL+ and VOL- for a long time, the phone attached to PC shortly for programming.
I followed this manual
https://forum.xda-developers.com/t/x7-max-and-gt-neo-flash-ubrick-instructions.4337339/
and ONLY A15 firmware worked for me! But i had to uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
After that flashing was successful.
AndreyKuz said:
Probably i had a similar problem.
Does your phone screen stays dark and the phone vibrates shortly each 20 sec? And you don't see any device when connect to PC over USB?
In my case when i held VOL+ and VOL- for a long time, the phone attached to PC shortly for programming.
I followed this manual
https://forum.xda-developers.com/t/x7-max-and-gt-neo-flash-ubrick-instructions.4337339/
and ONLY A15 firmware worked for me! But i had to uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
After that flashing was successful.
Click to expand...
Click to collapse
Phone didn't vibrates. Now the phone is defects on pc and auth bypass also works. But when I click on download the device disconnected itself.
Tikaram22 said:
Phone didn't vibrates. Now the phone is defects on pc and auth bypass also works. But when I click on download the device disconnected itself.
Click to expand...
Click to collapse
Usually you have only ~10sec between auth bypass and phone disconnect... It is necessary to do fast: open the options in SP Flash Tool, select the COM port, then click 'Download'.
Auth bypass is trying to bypass but. It said time out. 30000
Tikaram22 said:
Auth bypass is trying to bypass but. It said time out. 30000
Click to expand...
Click to collapse
Maybe it is necessary to hold Vol+ and Vol- longer until the auth tool finishes
Tikaram22 said:
Auth bypass is trying to bypass but. It said time out. 30000
Click to expand...
Click to collapse
So, your phone is not charging. Did you play with partitions? Or bootloader?
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Tikaram22 said:
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Click to expand...
Click to collapse
Tikaram22 said:
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Click to expand...
Click to collapse
Your device is xiaomi right? Plug your phone to charger for couple of hours.Then, try pressing VOL UP, DOWN keys to get into recovery or fastboot mode while the charger is connected. You will be able to put your phone in fastboot mode i guess.
Flash the boot image and recovery image through ADB. Did you unlock the bootloader? Can you please tell me the model of your device?
Goddamn_srilankan said:
Your device is xiaomi right? Plug your phone to charger for couple of hours.Then, try pressing VOL UP, DOWN keys to get into recovery or fastboot mode while the charger is connected. You will be able to put your phone in fastboot mode i guess.
Flash the boot image and recovery image through ADB. Did you unlock the bootloader? Can you please tell me the model of your device?
Click to expand...
Click to collapse
No brother it's realme x7 max. Display is only black. Can't trun on. Hard break
Tikaram22 said:
No brother it's realme x7 max. Display is only black. Can't trun on. Hard break
Click to expand...
Click to collapse
Did you try some of the guides provided? It is not that hard to set up the drivers to can bypass the SLAA/DAA restriction, also you have other forum explaining how it works https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/ there are various sites speaking about it, you have to keep it trying.
Can you enter to recovery, or fastboot mode? (this is done through stock recovery), I know you can't turn on the device, so you're bricked, but you have to try other modes, this will give you the certainty that device is not totally bricked, but only display is not showing a thing? When you try the various modes available, check on device manager from Windows, to see if the device is detected properly, open it in a part of your screen while you are trying.
SubwayChamp said:
Did you try some of the guides provided? It is not that hard to set up the drivers to can bypass the SLAA/DAA restriction, also you have other forum explaining how it works https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/ there are various sites speaking about it, you have to keep it trying.
Can you enter to recovery, or fastboot mode? (this is done through stock recovery), I know you can't turn on the device, so you're bricked, but you have to try other modes, this will give you the certainty that device is not totally bricked, but only display is not showing a thing? When you try the various modes available, check on device manager from Windows, to see if the device is detected properly, open it in a part of your screen while you are trying.
Click to expand...
Click to collapse
Didn't work. I think the partition had been damaged.
I shoud buy new motherboard
Tikaram22 said:
Didn't work. I think the partition had been damaged.
I shoud buy new motherboard
Click to expand...
Click to collapse
But what you have from the device?, some advice/warning. What you can do and what not? If the device shows some signal of life, and it is recognized for your PC, then you shouldn't replace it.
You just have to step in every of the ways.
I
SubwayChamp said:
But what you have from the device?, some advice/warning. What you can do and what not? If the device shows some signal of life, and it is recognized for your PC, then you shouldn't replace it.
You just have to step in every of the ways.
Click to expand...
Click to collapse
Have followed but not successed.
Sending to Sevice center soon