My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom what was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Related
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Sliderse said:
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Click to expand...
Click to collapse
Have you tried flashing stock rom of the Chinese version of the Note GT-19220?
Since you have the chine i9220 then make sure you get the specific roms for the chinese version. If you try flashing the N7000 roms you may get this error or may brick it so just be careful.
Sliderse said:
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Click to expand...
Click to collapse
You flashed N7000XXLQ3_N7000XXLPT_N7000NEELP4
It was N7000's rom and i feel its not compatible for i9220
You can flashed lidroid rom, both i9220 and n7000 can be flashed, I tried it and it works
Sent from my GT-N7000 using xda premium
Hello.
Recently my phone got stuck so i decided to reboot it, after reboot theres just a logo screen.
Recovery mode doesnt work.
Charging works (but after yesterday's manipulations charging logo is turning on but seem to be stuck either (though i guess its working just not animated anymore)).
Download mode works.
My OS was Cyanogen (i dont remember version).
I am kinda newbie but i ve read some stuff on the intenet and tried to solve the problem with Odin. I used N7000XXLSZ_N7000OXELS7_N7000XXLSO_FACTORY_SER with Odin versions: 1.83, 1.85 and 1.87 with
boxes checked PDA, PHONE, CSS.
1. Odin 1.85 is getting stuck on "NAND Write Start".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
2. Odin 1.83 is getting stuck on "zImage".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
3. Odin 1.87 is getting stuck on "NAND Write Start".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
I ve tried about 5+ times with each version.
You are my last hope fellas
Try just flashing an Odin version of philZ kernel. Also try another laptop with freshly installed samsung USB drivers.
Flash PhilZ kernel from Odin 3.07. After this, you'll have working PhilZ Touch Recovery
Try flashing philz cwm as they said or try flashing a stock ROM from sammobile.com .. And only use PDA and untick auto reboot ..
hi
sorry for my bad english
this phone kill me , can't downgrade , can't bypass Samsung id and really dead phone
i test the G900A_Downgrade_to_NCE file and after flashing system.img stop and odin fails
only 5.1.1 flashed okey
i test 3 kernel and after trying downgrade and fails
t tired of this phone , so help me
i try to downgrade for reactivation lock because in android 5.1.1 there is no bug to remove samsung id then i have to downgrade to bypass samsung id so help me
<ID:0/024> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900A_Downgrade_to_NCE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Set PIT file..
<ID:0/024> DO NOT TURN OFF TARGET!!
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> SingleDownload.
<ID:0/024> boot.img
<ID:0/024> NAND Write Start!!
<ID:0/024> recovery.img
<ID:0/024> persist.img.ext4
<ID:0/024> system.img.ext4
<ID:0/024> FAIL! (Auth)
<ID:0/024>
<ID:0/024> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a note 5 SM-N920C and it's rooted, I'm trying to flash the stock firmware but it won't work for some reason.
For odin version 3.09 I get this, I left it on for a hour but still the same thing.
I used N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 for flashing
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Had the same issue while flashing auto-root via odin.
It just stays stuck at NAND write part.
Familiaaa said:
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Click to expand...
Click to collapse
The problem is that I can't install the stock firmware, it doesn't complete the installation for some reason. Also when I am in TWRP, it said that there isn't a OS installed and I have seen that I have to install stock firmware.
I did try odin 3.12.3 and it failed, then I tried odin 3.10.6, it failed but now it also stops at a certain point and won't complete the installation. I could try odin 3.11.1, thanks for response.
I just tried Odin 3.11.1, failed
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that I tried odin 3.10 and 3.10.5, stuck again but at setupconnection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I think the problem is my stock firmware, I can't seem to find the stock for a SM-N920CZDAXSG. Help plz
It was the stock firmware, wrong version, I cry today.
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dori17 said:
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Get the needed firmware HERE (Sammobile.com)
The site also provides a newer ODIN version (3.10.6 is out of date)
You will need to register with a valid email to download files from Sammobile.com
And don't be afraid about the download speed as its 300KB/s for free accounts (Not 15KB/s as mentioned)
I think i had the same problem and it was because i was using a lower update and different region rom ! U must flash the exact rom as it's on your phone
Sent from my SM-N920C using Tapatalk