hi
sorry for my bad english
this phone kill me , can't downgrade , can't bypass Samsung id and really dead phone
i test the G900A_Downgrade_to_NCE file and after flashing system.img stop and odin fails
only 5.1.1 flashed okey
i test 3 kernel and after trying downgrade and fails
t tired of this phone , so help me
i try to downgrade for reactivation lock because in android 5.1.1 there is no bug to remove samsung id then i have to downgrade to bypass samsung id so help me
<ID:0/024> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900A_Downgrade_to_NCE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Set PIT file..
<ID:0/024> DO NOT TURN OFF TARGET!!
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> SingleDownload.
<ID:0/024> boot.img
<ID:0/024> NAND Write Start!!
<ID:0/024> recovery.img
<ID:0/024> persist.img.ext4
<ID:0/024> system.img.ext4
<ID:0/024> FAIL! (Auth)
<ID:0/024>
<ID:0/024> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Hi, i recently got the SM-G900A from AT&T and the firmware corrupted. It was running stock lollipop with the build number G900AUCU4BOF3. At first i was on a screen where it said for me to "Connect to Kies and select Emergency Recover" or something, but my phone isn't supported nor does it show up on Kies. I have tried every stock version i could find to try and downgrade my build number if possible, but it would always fail in Odin.
Also, in Recovery Mode it shows a completely different build number: G900AUCU1ANCE
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> aboot.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The thing i don't really get is why it let me flash "system.img.tar" and it won't flash a full stock rom without the output above.. Any help would be greatly appreciated! If possible, can someone dump their stock rom?
Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius
Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
enolaN_Fr said:
Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
Click to expand...
Click to collapse
You don't need to flash hidden.img.
Remove it from the firmware then flash again.
Well done, thanks for your help!
I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And the firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks
Stiria said:
I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And the firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks
Click to expand...
Click to collapse
Did you contact the dev?
I have a note 5 SM-N920C and it's rooted, I'm trying to flash the stock firmware but it won't work for some reason.
For odin version 3.09 I get this, I left it on for a hour but still the same thing.
I used N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 for flashing
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Had the same issue while flashing auto-root via odin.
It just stays stuck at NAND write part.
Familiaaa said:
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Click to expand...
Click to collapse
The problem is that I can't install the stock firmware, it doesn't complete the installation for some reason. Also when I am in TWRP, it said that there isn't a OS installed and I have seen that I have to install stock firmware.
I did try odin 3.12.3 and it failed, then I tried odin 3.10.6, it failed but now it also stops at a certain point and won't complete the installation. I could try odin 3.11.1, thanks for response.
I just tried Odin 3.11.1, failed
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that I tried odin 3.10 and 3.10.5, stuck again but at setupconnection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I think the problem is my stock firmware, I can't seem to find the stock for a SM-N920CZDAXSG. Help plz
It was the stock firmware, wrong version, I cry today.