Related
Hey, I'm in Australia (GSM) and I purchased a Motorola Droid 3 (XT862) from America a few months ago.
Should I have bought the XT860 (GSM version)?
I was with Optus but because they don't support the 850mhz network I switched to Vodafone because they had it. So now I atleast have data working on my phone after those months of not having it, but vodafone sucks, especially on this phone (text messages sometimes don't send/signal cuts out all the time) but the 3G is very good.
The phone I previously had before the Droid 3 was a HTC Tmobile G2 which I had also bought from America, and everything worked perfectly.
If I buy the XT860 will it fix everything?
On the Motorola website it says the XT862 and XT860 have the same networks... but the XT680 is supposed to be used on GSM, so would it work fine?
Sorry if I confused anyone, I'm really baked.
Thanks in advance for anyone trying to help
Maybe you could try the T-MOBILE AT&T hack?
Sent from my XT862 using XDA
i have XT 862, on GSM and it works perfectly. More than that, I use also vodafone
The xt860 (and xt883) would not be any better; all they (along with the xt862) support UTMS 850/1900/2100mHz. Thus, you probably didn't get a lot of 3G on the Optus network (which uses 900/2100mHz). The main Vodafone 3G network in Aus is 900/2100mHz, but they are in the process of rolling out an 850mHz network.
Telstra Next-G uses 850mHz (and they have 2100mHz as well, but only in cities I believe)
Anyway, in brief: If you're willing to switch to Telstra, you should get great results. If not, Vodafone is the next best option.
I have xt862 on optus in Austraia. I just stay in global mode. I did experiment around with some of the custom roms but found weirdnesses like my calls not coming thru. I went back to stock and now im going to stay on stock until cm9 reaches release. Im not having any issues on stock.
Hope this helps
Sent from my DROID3 using xda premium
MrObvious said:
Maybe you could try the T-MOBILE AT&T hack?
Sent from my XT862 using XDA
Click to expand...
Click to collapse
Just did it, I suppose it improved the situation a tiny bit, but i'm not sure.
I will do some tests on the Telstra network, see if it's better than Vodafone.
Im using the phone in Global mode atm and I'm getting a decent 3-4 bars instead of the 1 or 2 i'd normally get which excites me
And the network type is displaying HSPA.
But I cannot send text messages, everytime, it just says "Text message not sent" which is very annoying. Anyone know anything about this? When I swapped over to Vodafone from Optus I could send texts but after a point it just stopped working...
Anyone know anything about this?
thanks
So does the droid 3 bought from usa connect to data services with optus at all?
How fast is data transfer in "global" mode?
late reply i know, but I'm on TPG [Optus network] in Qld, Aus with the droid 3 XT862.
from memory, all i've done is done the 'hack' to show actual reception, rather than 1 bar. I run the phone on the global setting.
I just ran a speedtest.net check, got an internode server in Sydney. ping 139ms, DL 5241kbps, UL 1202kbps.
OP, when you were with Optus, did you go through your account settings and make sure you had 3G data turned on for your phone, etc? I'm not trying to patronise or anything, but it always helps to start with the basics when fault finding.
Regards,
Hi All,
Im also in Australia, with Vodafone, and am looking at getting myself a Droid 3 as well.
Since the phones aren't released here, what happens about software updates? Im assuming they won't happen via OTA?
Im leaning towards the XT860, rather than the XT862, any particular reason to go for either?
Thanks,
cevad
cevad said:
Hi All,
Im also in Australia, with Vodafone, and am looking at getting myself a Droid 3 as well.
Since the phones aren't released here, what happens about software updates? Im assuming they won't happen via OTA?
Im leaning towards the XT860, rather than the XT862, any particular reason to go for either?
Thanks,
cevad
Click to expand...
Click to collapse
No difference between them but the xt860 has more dedicated roms here. Both are the same phone and just build.prop edits are needed to get the phones up and running in 5 mins. OTA updates will still work anywhere tho if you root and mod your phone don't use use the OTA feature as you will screw your phone.
All you need to do select wcdma/gsm mode and manually put in your service provider APNs to get 3G. Find this on the Voda site.
Best place to find your APN is here:
http://ausdroid.net/apns/
Sent from my LT26i using xda premium
somemadcaaant said:
All you need to do select wcdma/gsm mode and manually put in your service provider APNs to get 3G. Find this on the Voda site.
Click to expand...
Click to collapse
I managed to get a xt862, but I cant get data working on optus? (live connected)
calls/text works - tried global mode, tried GSM/UMTS mode, tried manually selecting optus 3g network, made sure the data setting was enabled which is actually under "battery & data manager". Already manually input the optus apn.
what am I missing?
Do you have to do the tmobile at&t hack? running everything stock from factory; or will rooting the phone/install ics help?
I have the one bar reception bug which I read on another thread if that makes a difference.
nvm, got it to work, for some reason manually inputting an APN didnt work, had to find the optus site and send it via sms.
Speed isnt too bad.
The next problem now though is wireless hotspot. It connects but no data goes through for some reason
jjabrams said:
The next problem now though is wireless hotspot. It connects but no data goes through for some reason
Click to expand...
Click to collapse
If the xt862 is the verizon version, I have read that verizon have blocked the hotspot stuff from working.
Droid 4 On Rogers Wireless (Canada) - Incoming "Pay Phone" caller ID Solution
I recently got my XT894, Droid 4 in the mail, and hooked it up to Rogers Wireless in Canada.
When I was receiving phone calls, the built in dialer would tell me that "Pay Phone" is calling, the solution to contact the Rogers Customer Care, and have them remove the "Name Display" option.
Rogers has 2 services for call display:
Name Display (which does a phonebook lookup from Roger's Side)
Call Display (the number of the dialer who is trying to dial you)
Most motorola radios don't actually support these 2 features together, so Blur reads it as "Pay Phone". After contacting Customer Service, have them remove ONLY "Name Display". I restarted my phone then everything started working properly again.
I hope this helps someone!
First off, I wanted to say that I'm on the leak 6.16.206
I also got mobile hotspot working on Rogers (this solution may apply to other rooted users running on different providers).
I added the APN settings as defined originally here: http://forum.xda-developers.com/showpost.php?p=20366961&postcount=2
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: dun
otherwise, any other fields are showing as <not set> OR None
When I tried to add dun to the apn type, the moto UI told me only providers could add DUN types, so I went into SQLite Editor -> Phone/Messaging Storage -> telephony.db -> carriers -> Located the last APN which I added manually, scrolled over to "type" then long pressed that field, chose "edit field" and added dun. Once completed, I restarted my phone. I now have the stock mobile hotspot app working (I had to also disable the entitlement check earlier) on Rogers!
Now wait, you got a Droid 4 working on Rogers????
bean1975 said:
Now wait, you got a Droid 4 working on Rogers????
Click to expand...
Click to collapse
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
I can confirm that the Droid 4 works on Rogers. Took a week of fiddling, but it works.
Received the Droid 4 with 2.3.4 installed. Did the over-the-air updates to 4.0.4. Rooted it, installed SafeStrap 3, and installed Olegfusion's CM10/JB ROM (4.1.2), and was off to the races. Shows "E", "3G", and "H" when accessing the Internet.
have you ever try with stock kernel?
I wonder not to update to CM10 right now. I have a problem, it seems to connect, 3G/H letter, bu no tranmition. I have an old jaj, Droid3 working perfectly with same APN records.
Any thing that could help me??
danifunker said:
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
Click to expand...
Click to collapse
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
heymon79 said:
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
Click to expand...
Click to collapse
LTE on this phone is not compatible with the Rogers network. If you want a Rogers LTE phone, pickup the Motorola RAZR HD. The phone will operate on 3G or 3.5G, although we in Canada consider HSPA+ to be "4G".
LTE can give you rates of up to 100mbps usually gives you about 25-30mbps
HSPA+ can give you rates up to 12-15mbps I usually get 4-5mbps
I hope that helps!
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
imeem said:
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
Click to expand...
Click to collapse
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
danifunker said:
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
Click to expand...
Click to collapse
so you're saying that all droid 4 are already unlocked?
Yes. They are still blocked against US GSM carriers but will work fine everywhere else, no locks.
Sent from my DROID4 using Tapatalk
Maybe someone can help me, I'm on Rogers. I have this same issue on Stock ICS .217 and on CM10. I can make phone calls and send text messages, but I cannot receive either. When I put my sim card in to another phone, I start getting my text messages. Any ideas on how to remedy this?
Have you tried another SIM card in your phone? Sounds like you have something wired. I would also check to make sure you are in global mode on the phone.
Sent from my XT894 running CM10
BTW where did u guys get your droid 4 if you're from canada? from ebay?
imeem said:
BTW where did u guys get your droid 4 if you're from canada? from ebay?
Click to expand...
Click to collapse
I got mine from xda but now that's closed...
Sent from my XT894 running CM10
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Terrible Reception on Telus (stock 217, -100dBm)
bean1975 said:
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Click to expand...
Click to collapse
I went through the process today and got my stock Verizon 217 Droid 4 working on Telus. I verified the Telus APN settings, went through forcing GSM/UMTS and UMTS-only mode, but still have terrible reception: 1-2 bars, -100dbM. Any thoughts for getting better signal?
[SOLVED] DROID 4 Canada SMS/voice only, no data on Rogers/Fido - help!
SOLVED! see below.
Droid 4 from Ebay, $135 or something + shipping. Replacing my string of bad luck with i927's from smartphone_wholesale (aka Cell Phone Forever) on ebay (tho the 1st one they sent was great til i lost it).
SMS/Voice is fine but cannot do any cell data on it. Following all settings on fido's site for APNs the fido-core-appl1.apn doesnt work. Had to manually put it in (APN list was blank). Tried my wife's Roger's sim, it populated the APN list itself (4 of them, all combos of internet w or w/o MMS, and rogers +/- 'internet' in the name). None of them work either (they match what's in the fora here and on the rogers site, rogers-core-appl1.apn etc).
Im a bit of a newb: is my phone not unlocked properly or something? What gives? Radio is set to global or GSM/UMTS (CDMA doenst work of course). What's the solution here?
System version: 98.72.18.XT894.Verizon.en.US
Android Version: 4.1.2
Baseband Version: CMDA_N_05.25.00R LTEDC_UI_09.1D.00
Kernel: 3.0.8-g473e586
Build #: 9.8.20-72_VZW-18 Feb 8 13:11:57 2013
yes mobile data is on (and roaming set to yes but phone states it's not roaming now)
every time i've added apn's and saved i've rebooted (and rebooted twice with wife's SIM in too, in case settings had to go sim -> phone + reboot, etc). No luck any way ive tried.
Thanks for help.
[UPDATE]
belay that request cadet!
Ok I just removed the wife's sim and put mine in, rebooted, and this sim (fido) doesnt populate the APN list. I was in the middle of inputting settings for it, hadn't finished and a buncha text+ came in and wifi is off (I saw I was on Edge, big blue E on status bar). Then before I could even react I had hit save, and data turned off.
Yep, removing "internet" from the APN 'type' works fine. Leave it blank.
W t f. Maybe someone can explain that shiz to me.
I have an unlocked Galaxy S4 active i9295 and I cannot get the 4G or the LTE working since I do not have even the option I only have WCDMA/GSM I travel around the world with this phone and now I am in Ireland on 3 and still I am getting H+ showing and not LTE or 4G. Is there a way to activate 4G or is there any special 4G sims ?
I would check your APN settings, seeing how you are unlocked, the proper APN may not be installed to match your Sim, check with your carrier, to make sure they are 4G and LTE capable and get their settings.
Sent Via Smoke Signals
Try ShowServiceMode. It should help to unlock LTE band. It worked for me here in Poland, because local career's LTE was locked by my Russian firmware. But using this program I can only switch between phone calls (GSM/3G) and LTE, they cannot work simultaneously.
Thank you guys. One major thing is that why I can even see the option in the settings? If anyone else has some information please help out.
Thanks
like my phone can just sit on 3G, in the same place,while not moving
but if i reboot my phone, it'll pop on to LTE (if its available in that area)
but i reboot it in known LTE areas (when showing 3G)
anyway to force LTE, without rebooting the phone?
or is there some time schedule where it checks to see if LTE is available that I can change?
Yes which model u have? Its in the secret menu
Sent from my LG-D959 using Tapatalk
Sprint version
SayWhat10 said:
Sprint version
Click to expand...
Click to collapse
I don't have the Sprint version so I don't know if this works but you can try https://www.youtube.com/watch?v=bSrtUw8D9_w as this method worked for the very similar LG G2 for Sprint.
I feel for you buddy because this phone is blazing fast on LTE
Sent from my LG-D959 using XDA Premium HD app
He didn't even have to say he was on the Sprint version.. I just knew. Hehe
Visa Declined said:
He didn't even have to say he was on the Sprint version.. I just knew. Hehe
Click to expand...
Click to collapse
Hahaha you're absolutely right. I knew just by reading the thread. Sprint is the worst! My HTC One on Sprint was amazing but I couldn't ever hold on to an LTE connection for more then 30 seconds. Unlimited data is useless if your only on their horribly slow 3g
Sprint does suck, if i didnt have 4 other people on my account that would have to get new phones/account etc, I would have been switched.
but that video i think was to turn on LTE, my LTE is on, but for some reason wouldnt search/connect to LTE when it was available all the time
however i went into my mobile connection settings, and changed it from "LTE/CDMA" to Global
now it seems to switch to LTE when its in an LTE area. LTE icon comes up without me having to reboot, i'll keep a watch on it for a few days to see if indeed that was the solution
by the way, anybody now what the "global" option is? compared to LTE/CDMA
SayWhat10 said:
Sprint does suck, if i didnt have 4 other people on my account that would have to get new phones/account etc, I would have been switched.
but that video i think was to turn on LTE, my LTE is on, but for some reason wouldnt search/connect to LTE when it was available all the time
however i went into my mobile connection settings, and changed it from "LTE/CDMA" to Global
now it seems to switch to LTE when its in an LTE area. LTE icon comes up without me having to reboot, i'll keep a watch on it for a few days to see if indeed that was the solution
by the way, anybody now what the "global" option is? compared to LTE/CDMA
Click to expand...
Click to collapse
I'm pretty sure the global setting is to allow it to connect to GSM carriers in the event that the device is unlocked and the APN is changed accordingly.
I have the same problem in brazil, looks like a problem with the Phone. I had a Samsung S4 that worked with full signal in 4G in my home, now that I moved to LG G Flex it also works full signal 4G in home, but when I move to some place where is Edge then go Back to home, it never moves back to LTE automatically. I need to restart or change the NetworkMode manually to make it back working in 4G.
I think the phone has a problem to automatic search and change the Network mode.
anyone know how to enable only lte yet? i've tried all different kinds of secret menu codes and cant figure it out.
Answer
How to access the hidden service menu on LG G Flex:
For AT&T: Go to dialer and enter 3845#*950#
For T-Mobile: Go to dialer and enter 3845#*959#
For Sprint: Go to dialer and enter 3845#*995#
Once you're in the hidden menu, go to LTE-Only > Modem Settings > RAT Selection > LTE only
Enjoy!
-Curt
Hello,
Can I use verison version of this phone in Europe (serbia, slovenia...) normally? Can I turn off 4g/LTE if I need and use only 3g/hspa connections? In my region 4g signal is pure and I have a problem with battery and signal. Does secret menu *#*#4636#*#* works of this version of phone? Thank you.
U can use this phone. Just replace with a local sim card. There is an "unrecognized sim" icon constantly in the notification bar, but other than that everything works the same.
Sent from my SM-G925V using Tapatalk
I lived in Spain with the g925v and it does work, but only on 2g/3g, no 4g LTE signal. By that time I was running Android 5.0.2, I believe that with the updates the European LTE band is usable now but I can't assure that.
You can turn off the LTE antenna accessing the menu with this code *#27663368378#