Database Develop

[Q] Noob firmware question

Little confused on the firmware version I have. When I open a command prompt in adb fastboot with the "fastboot getvar all" command, it shows "version-main- 1.26.502.12" which is an old firmware. When I check the settings "about" page on the phone it shows build number 3.62.401.1. Isn't the build number listed on the phone the current firmware? Here's the fastboot command prompt:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4100mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
phone is superCID, s-off, unlocked, running viper 3.5 rom.

whodatfan said:
Little confused on the firmware version I have. When I open a command prompt in adb fastboot with the "fastboot getvar all" command, it shows "version-main- 1.26.502.12" which is an old firmware. When I check the settings "about" page on the phone it shows build number 3.62.401.1. Isn't the build number listed on the phone the current firmware? Here's the fastboot command prompt:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4100mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
phone is superCID, s-off, unlocked, running viper 3.5 rom.
Click to expand...
Click to collapse
Its not compulsory to have the same buildnumber and firmware version
from the details above...i guess u might have flashed an older firmware (1.44 hboot)
you can flash the recent firmware of 3.62 build..mostly it would be of 1.55hboot in RUU mode as you are S-off

Harish_Kumar said:
Its not compulsory to have the same buildnumber and firmware version
from the details above...i guess u might have flashed an older firmware (1.44 hboot)
you can flash the recent firmware of 3.62 build..mostly it would be of 1.55hboot in RUU mode as you are S-off
Click to expand...
Click to collapse
It's an original launch day phone, so that is the original firmware as I didn't perform a firmware flash. I just unlocked, rooted/rom, and got s-off, superCID. So do I need to relock the bootloader to do this firmware flash? I'm gonna use the nowipe 3.62 firmware. If I do need a relock, do I need to unlock the bootloader again after or can I still flash roms with s-off locked? Sorry for so many questions, I'm coming from years of iOS jailbreaking and just starting to get into the android developer language. Any help is always appreciated.

whodatfan said:
It's an original launch day phone, so that is the original firmware as I didn't perform a firmware flash. I just unlocked, rooted/rom, and got s-off, superCID. So do I need to relock the bootloader to do this firmware flash? I'm gonna use the nowipe 3.62 firmware. If I do need a relock, do I need to unlock the bootloader again after or can I still flash roms with s-off locked? Sorry for so many questions, I'm coming from years of iOS jailbreaking and just starting to get into the android developer language. Any help is always appreciated.
Click to expand...
Click to collapse
You dont have to relock and unlock bootloader because you are s-off...you can flash firmware directly in RUU mode or run an RUU.zip or RUU.exe to update your firmware

Harish_Kumar said:
You dont have to relock and unlock bootloader because you are s-off...you can flash firmware directly in RUU mode or run an RUU.zip or RUU.exe to update your firmware
Click to expand...
Click to collapse
Thanks bro. That's what I was wanting to know. Appreciate the info.:good:

I can't figure which is the proper stock rom for my phone

Hi guys i solved the prev problem but now i want to get back to stock an i couldn't find which is the best stock rom for my htc one
am confused between
HTML:
RUU_M7_UL_JB_50_hTC_Asia_WWE_1.26.707.5_Radio_4A.13.3231.20_10.30.1131.05_release_309365_signed_2_4.exe
&​
HTML:
RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe
and if there is another is more suitable please tell me
thanx
this is my phone info
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***************
(bootloader) imei: *************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4327mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

LilbrownMeko said:
this is my phone info
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: [COLOR="Green"][B]1.54[/B][/COLOR].0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: [COLOR="red"][B]PLEASE REMOVE[/B][/COLOR]
(bootloader) imei: [B][COLOR="Red"]PLEASE REMOVE!!![/COLOR][/B]
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: [B][COLOR="Green"]PN0711000[/COLOR][/B]
(bootloader) cidnum: [COLOR="green"][B]HTC__j15[/B][/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4327mV
(bootloader) partition-layout: Generic
(bootloader) [COLOR="green"][B]security: on[/B][/COLOR]
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
From what I see from your ''fastboot getvar all'' your CID is HTC__J15 and MID PN0711000 so you need a .401 base RUU like this one : http://www.htc1guru.com/dld/ruu_m7_u_jb_50_htc_europe_1-29-401-2_r_radio_4a-14-3250-13_10-33-1150-01_release_311663_signed_2_4-exe/ not a .707
But you are S-on, you shouldn't be able to run a RUU because it require Hboot downgrade to 1.44 (you are on 1.54)
Maybe you should go with a guru reset from htc1guru.com or attemp to s-off and run the 1.29.401 ruu.exe
---------- Post added at 01:43 AM ---------- Previous post was at 01:38 AM ----------
and you should take a look at this thread: http://forum.xda-developers.com/showthread.php?t=2541082
everything explained to return 100 stock
AND DELETE IMEI AND SN FROM YOUR LAST POST!!!!!
---------- Post added at 01:54 AM ---------- Previous post was at 01:43 AM ----------
LilbrownMeko said:
I have htc one
at the first time i tried to change my rom to google edition i flashed new Kernel Bulletproof-m7-11.0 i relocked my bootloader
S-Off and changed my cid from htc__j15 to GOOGL001
now i'm stucked i cant
What i need guys is
to get my one out of this loop and return to stock with no trace
I spent the whole day searching for it but no result
Please help guus
------------
htc one wwe
modelide PN0711000
Click to expand...
Click to collapse
Why did you go s-on again!? Big mistake...

But you are S-on, you shouldn't be able to run a RUU because it require Hboot downgrade to 1.44 (you are on 1.54)
Maybe you should go with a guru reset from htc1guru.com or attemp to s-off and run the 1.29.401 ruu.exe
and you should take a look at this thread: http://forum.xda-developers.com/show....php?t=2541082
everything explained to return 100 stock
AND DELETE IMEI AND SN FROM YOUR LAST POST!!!!!
Why did you go s-on again!? Big mistake...
Click to expand...
Click to collapse
@alray
if i down grade my hboot is it gonna effect my device preformance and can i receive the OTA updates??
why getting S-ON is Big mistake...??
Sorry for asking a lot

LilbrownMeko said:
if i down grade my hboot is it gonna effect my device preformance
Click to expand...
Click to collapse
We don't care! Let me explain: you have to downgrade hboot to 1.44 to be able to run that ruu I linked above. After the ruu process is complete you will receive ota and hboot will update to latest version avail.
LilbrownMeko said:
can i receive the OTA updates??
Click to expand...
Click to collapse
Yes after a RUU restore, your device will be 100% stock (stock OS, stock recovery etc...) so as long your MID and CID match the ruu, you will receive ota updates.
LilbrownMeko said:
why getting S-ON is Big mistake...??
Click to expand...
Click to collapse
Allways stay s-off !!! If you still were s-off, you simply had to run that ruu.exe i linked above. Now with s-on you can't downgrade hboot. Nothing guarantee you will be able to s-off again when you go back s-on. so better to stay s-off.
now go read that thread I linked above (nkk71 guide to return stock) and you will find many options to return stock. You can also use a decrypted ruu.zip and edit the android-info.txt to match your mid and cid.

LilbrownMeko said:
@alray
if i down grade my hboot is it gonna effect my device preformance and can i receive the OTA updates??
why getting S-ON is Big mistake...??
Sorry for asking a lot
Click to expand...
Click to collapse
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
so get s-off using rumrunner, then use this ruu: http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
EDIT: hold on, once s-off, change your CID "fastboot oem writecid HTC__J15" (two underscores, and capital J, not lowercase), why is it lowercase??

EDIT: hold on, once s-off, change your CID "fastboot oem writecid HTC__J15" (two underscores, and capital J, not lowercase), why is it lowercase??
Click to expand...
Click to collapse
@nkk71 I Don't know why it's lowercase but if you didn't recognized that the main version doesn't exist !!!!
Why is that ???

Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3945mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm now S-OFF @alray
my "(bootloader) version-main: " is empty ???? does it mean any thing
and what's the difrent between orginal CID and SuperCID ??

LilbrownMeko said:
@nkk71 I Don't know why it's lowercase but if you didn't recognized that the main version doesn't exist !!!!
Why is that ???
Click to expand...
Click to collapse
LilbrownMeko said:
Code:
fastboot getvar all
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
and what's the difrent between orginal CID and SuperCID ??[/QUOTE]
1- yes, i saw that, but didnt care cause you're s-off; it sometimes happens when trying to flash a firmware package and it doesnt go through successfully.
2- SuperCID is 11111111 (8 ones), then you can use any ruu you like, but it won't let you get any OTAs
3- so recommend you set HTC__J15, so you can receive OTAs
4- keep S-OFF !!
Click to expand...
Click to collapse

1- yes, i saw that, but didnt care cause you're s-off; it sometimes happens when trying to flash a firmware package and it doesnt go through successfully.
2- SuperCID is 11111111 (8 ones), then you can use any ruu you like, but it won't let you get any OTAs
3- so recommend you set HTC__J15, so you can receive OTAs
4- keep S-OFF !!
Click to expand...
Click to collapse
@nkk71
I did as You said Now am on stock FrimWare Stock recovery no root and I have one problem that is when i come to update the phone i'ts directly reboot to recovery and beacuse i don't have custom recovery it's restore the factory rest and delet all data on SD even the OTA file and no update happen
what should i do
and why this happening??
OTA Update is::2.24.401.2 JB 4.2.2
My phone current info
Code:
bootloader Status : Relocked
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15

LilbrownMeko said:
@nkk71
I did as You said Now am on stock FrimWare Stock recovery no root and I have one problem that is when i come to update the phone i'ts directly reboot to recovery and beacuse i don't have custom recovery it's restore the factory rest and delet all data on SD even the OTA file and no update happen
what should i do
and why this happening??
OTA Update is::2.24.401.2 JB 4.2.2
My phone current info
Code:
bootloader Status : Relocked
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
Click to expand...
Click to collapse
sorry, didnt understand exactly, so you ran the RUU -> so yes, you'll be 100% stock (including stock recovery, which is needed anyway), you reboot and get the notification for update to 2.24.401.2 and during update it goes to stock recovery which is normal.
What am i misunderstanding?

sorry, didnt understand exactly, so you ran the RUU -> so yes, you'll be 100% stock (including stock recovery, which is needed anyway), you reboot and get the notification for update to 2.24.401.2 and during update it goes to stock recovery which is normal.
What am i misunderstanding?
Click to expand...
Click to collapse
@nkk71
after the update finish downloading i click ok install now "the device reboot to recovery but instade of updating it's start to factory rest "

LilbrownMeko said:
@nkk71
after the update finish downloading i click ok install now "the device reboot to recovery but instade of updating it's start to factory rest "
Click to expand...
Click to collapse
very strange, did the ruu complete successfully? Maybe try running the ruu again, and do the update again.

From ARHD 52 to stock

Hi everyone,
I need to reflash the latest stock ROM in my M7... I tried to download the latest RUU Europe but it says errore 158 wrong ROM.
Actually I have a HTC with REvolution HD 52.0
Hboot 1.44.0000
Rooted
Unlocked
can anyone help me finding the correct RUU and procedure?
Thanks

gerazzo said:
Hi everyone,
I need to reflash the latest stock ROM in my M7... I tried to download the latest RUU Europe but it says errore 158 wrong ROM.
Actually I have a HTC with REvolution HD 52.0
Hboot 1.44.0000
Rooted
Unlocked
can anyone help me finding the correct RUU and procedure?
Thanks
Click to expand...
Click to collapse
getvar pls
EDIT:nevermind, just look for your version in here http://www.htc1guru.com/downloads/ruu-zip-downloads/
the steps in going back to 100% stock is in here http://forum.xda-developers.com/showthread.php?t=2358738
credits to @crushalot for making this steps

grins814 said:
getvar pls
EDIT:nevermind, just look for your version in here http://www.htc1guru.com/downloads/ruu-zip-downloads/
the steps in going back to 100% stock is in here http://forum.xda-developers.com/showthread.php?t=2358738
credits to @crushalot for making this steps
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.20.3263.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3836mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.060s

how come you dont have version-main? try this one http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/ make sure the MD5 in this site matches the one you downloaded

gerazzo said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
finished. total time: 0.060s
Click to expand...
Click to collapse
Why do you need to go back to stock? Warranty/selling?
because with S-On you can only get your bootloader to say RELOCKED, it will never say LOCKED unless you S-Off.

nkk71 said:
Why do you need to go back to stock? Warranty/selling?
because with S-On you can only get your bootloader to say RELOCKED, it will never say LOCKED unless you S-Off.
Click to expand...
Click to collapse
just beacause i want the stock one with ota updates

gerazzo said:
just beacause i want the stock one with ota updates
Click to expand...
Click to collapse
Two more questions
1- do you care about bootloader saying RELOCKED instead of LOCKED?
2- do you ever need to S-Off you device?

nkk71 said:
Two more questions
1- do you care about bootloader saying RELOCKED instead of LOCKED?
2- do you ever need to S-Off you device?
Click to expand...
Click to collapse
All i know is that i need root....
so i think i have to be at least unlocked to also installa modded recovery.
Am i wrong?

nothing....
i tried: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
but it says that i have to choose the correct utility....
Can someone help me?
Thanks in advnce

OTA Update Failure

Hi
I was putting my phone back to stock, have installed the 1,28 RUU and working perfectly fine and it prompted me to update to 1.29 upon installing, system always aborted it (tried manual OTA installation thru stock recovery as well) and is showing "assert failed:apply patch_check("system/app/Books.odex". "xxxxxxxx.........." What do I need to do to resolve this issue? I tried it with an unlocked bootloader and I relocked my bootloader as well.
Below is my phone details
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4308mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.069s

As you are s-off just download this ruu and run it, you may need to flash the corrisponding firmware first
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/

Seanie280672 said:
As you are s-off just download this ruu and run it, you may need to flash the corrisponding firmware first
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
Hi, so I need to flash 4.19.401.9 firmware from this thread http://forum.xda-developers.com/showthread.php?t=2365506
then run the RUU? Do you have the link for the flashable zip, as I am in the office and cannot install .exe file. At home, I have windows 8.1 which I think might have some issues.

Seanie280672 said:
As you are s-off just download this ruu and run it, you may need to flash the corrisponding firmware first
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
Can I use this ? http://www.htc1guru.com/2014/03/android-ruu-europe/

ryski said:
Can I use this ? http://www.htc1guru.com/2014/03/android-ruu-europe/
Click to expand...
Click to collapse
Yes you can use that, it's the same ruu, is that the ruu.zip, I couldn't quite see as I'm at work too, be careful which firmwares you try and flash, any modified ones and you can never go s-on as these will instantly brick your phone.

Seanie280672 said:
Yes you can use that, it's the same ruu
Click to expand...
Click to collapse
Wont it automatically update the firmware?

ryski said:
Wont it automatically update the firmware?
Click to expand...
Click to collapse
If it's the full ruu then yes it should do

[Q] HTC one (m7) Cant find the right RUU

Locked
tampered
M7_UL PVT SHIP S-On RH
HBOOT- 1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
May 3 2013,17 17:22:59:-1
I have tried servel RUU files and none have worked. Anyhelp would be grateful

What firmware are you on? It has to be older or same as the RUU you're going to flash.
Also select the RUU depending on your CID.

Matts_ said:
What firmware are you on? It has to be older or same as the RUU you're going to flash.
Also select the RUU depending on your CID.
Click to expand...
Click to collapse
Where can I find my CID and firmware?

Start phone in fastboot mode and send command "fastboot getvar all".

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35ZW904575
(bootloader) imei: 354436059705069
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.041s
right so how do i find the right RUU with this info? Do i look for ruus with the HTC___001?

SpyduckCraig said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: please edit and remove
(bootloader) imei: please edit and remove
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.041s
right so how do i find the right RUU with this info? Do i look for ruus with the HTC___001?
Click to expand...
Click to collapse
you can only flash an RUU which is for both your CID and MID
So you are right in saying it has to be for CID HTC__001. You can (I think) only flash a 2.xx.xxx.x RUU and not the most recent one, as it'll give you an error message I think
Check here http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/

SpyduckCraig said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
right so how do i find the right RUU with this info? Do i look for ruus with the HTC___001?
Click to expand...
Click to collapse
stovie_steve said:
you can only flash an RUU which is for both your CID and MID
So you are right in saying it has to be for CID HTC__001. You can (I think) only flash a 2.xx.xxx.x RUU and not the most recent one, as it'll give you an error message I think
Check here http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
Click to expand...
Click to collapse
He's s-on he can't use the decrypted RUU.zip ? ( I could be wrong I been s-off forever)
I think you need a ROM.zip pulled from a RUU.exe or just use the actual RUU.exe
most likely you'll have to use this one >> http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe

clsA said:
He's s-on he can't use the decrypted RUU.zip ? ( I could be wrong I been s-off forever)
I think you need a ROM.zip pulled from a RUU.exe or just use the actual RUU.exe
most likely you'll have to use this one >> http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
Click to expand...
Click to collapse
Ah yes. It's a decrypted one you are right. It needs to be an original RUU

stovie_steve said:
Ah yes. It's a decrypted one you are right. It needs to be an original RUU
Click to expand...
Click to collapse
Guys I have tried all the suggested files but none seem to work. ;/
I had to re lock the bootloader and sometimes when I put the phone into fastboot the red text is sometimes cut in half for some reason.
Also my image version is 1.29,401.16.
(just some extra info to help?)
Thanks

SpyduckCraig said:
Guys I have tried all the suggested files but none seem to work. ;/
I had to re lock the bootloader and sometimes when I put the phone into fastboot the red text is sometimes cut in half for some reason.
Also my image version is 1.29,401.16.
(just some extra info to help?)
Thanks
Click to expand...
Click to collapse
what error did the RUU give
you could try flashing the firmware first then the RUU
here's the firmware >> http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/401/4.19.401.9.zip
flash it with fastboot...
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader

clsA said:
what error did the RUU give
you could try flashing the firmware first then the RUU
here's the firmware >>
flash it with fastboot...
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
Thank you sooo sooo soooo much! I actually cant thank you enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

SpyduckCraig said:
Thank you sooo sooo soooo much! I actually cant thank you enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Glad you got it... you should get an OTA update soon
wait for it before you unlock and re root