Database Develop

HTC Vivid at&t S-Off and Sim Unlock

S-Off:
Thanks to http://unlimited.io/juopunutbear.htm for his way of that wire trick which made it easy to S-Off, to S-Off your phone:
1 - you have to be using Stock Rom RUU (ICS Rom)
2 - you have Unlocked and rooted your phone
3 - Fastboot off ( you can reach that from battery in sittings and change it)
4 - your phone fully charged
5 - USB debugging is on and on charge only
6 - download Control bear realse for ICS from: http://www.4shared.com/zip/8JTKm8yU/controlbearrelease_holiday_ics.htm
7 - Extract attachment in new folder
8 - shift + right click in that folder and choose open command window here
9 - type " ControlBear.exe " press enter and follow instruction till it till you to do wire trick
10 - while doing Wire Trick : - should Wire first end Pin First then touch the other End of wire to GND for 0.5 second and wait 1.5 second and touch it again for 0.5 second
Now it will reboot wait till it finish. Now you will have your phone S-Off
After you get S-OFF you ready to SIM Unlock: Use thise website : http://www.sieempi.eu/blog/2011/09/22/universal-sim-unlock-for-s-offed-htc-devices-536
1 - fill the form with your Email and IMEI
2 - Download Config.dat that sent to your mail and copy it to your SD Card
3 - reboot your phone to bootloader and choose SIM Lock
Enjoy your phone SIM Unlocked
PIN and GRD in photo in Attachment
Thanks to juopunutbear and sieempi
I did nothing i just followed their steps and got my phone unlocked, i just want to share this with others

problem
youy_2008 said:
S-Off:
Thanks to http://unlimited.io/juopunutbear.htm for his way of that wire trick which made it easy to S-Off, to S-Off your phone:
1 - you have to be using Stock Rom RUU (ICS Rom)
2 - you have Unlocked and rooted your phone
3 - Fastboot off ( you can reach that from battery in sittings and change it)
4 - your phone fully charged
5 - USB debugging is on and on charge only
6 - download Control bear realse for ICS from: http://www.4shared.com/zip/8JTKm8yU/controlbearrelease_holiday_ics.htm
7 - Extract attachment in new folder
8 - shift + right click in that folder and choose open command window here
9 - type " ControlBear.exe " press enter and follow instruction till it till you to do wire trick
10 - while doing Wire Trick : - should Wire first end Pin First then touch the other End of wire to GND for 0.5 second and wait 1.5 second and touch it again for 0.5 second
Now it will reboot wait till it finish. Now you will have your phone S-Off
After you get S-OFF you ready to SIM Unlock: Use thise website : http://www.sieempi.eu/blog/2011/09/22/universal-sim-unlock-for-s-offed-htc-devices-536
1 - fill the form with your Email and IMEI
2 - Download Config.dat that sent to your mail and copy it to your SD Card
3 - reboot your phone to bootloader and choose SIM Lock
Enjoy your phone SIM Unlocked
PIN and GRD in photo in Attachment
Thanks to juopunutbear and sieempi
I did nothing i just followed their steps and got my phone unlocked, i just want to share this with others
Click to expand...
Click to collapse
I used the steps and it gives me this message. I am s-on
Old beer detected...... Ple
Starting up......
Connecting to device...
Backing up......
Transferring backups....
Secondary backup FAILED!!
Press ENTER to exit.....

sketchscarz said:
I used the steps and it gives me this message. I am s-on
Old beer detected...... Ple
Starting up......
Connecting to device...
Backing up......
Transferring backups....
Secondary backup FAILED!!
Press ENTER to exit.....
Click to expand...
Click to collapse
Try it again but you have to use original RUU ICS for your device before following these steps
you can download that from here : http://forum.xda-developers.com/showthread.php?t=1564776
and follow the steps again and it will work that happened with me when i followed the steps

vivid almost unlocked need to verify recovery or flash stock recovery
youy_2008 said:
Try it again but you have to use original RUU ICS for your device before following these steps
you can download that from here : http://forum.xda-developers.com/showthread.php?t=1564776
and follow the steps again and it will work that happened with me when i followed the steps
Click to expand...
Click to collapse
config.dat ran to change radio, since not s=off failed.
need to flash recovery to stock recovery/ current recovery could brick phone whjen flashing stock RUU .IMG ROM
Not positive that i have the recovery that makes brick sandwich, becasue there is a old recovery that does not allow certain system files to fetch the files needed to install RUU.
Need to verify recovery/flash stock RUU rom
if recovery is not verified / flash stock recovery i Have TeamWin 2.4.4.0 TWRP
proceed to write radio

sketchscarz said:
config.dat ran to change radio, since not s=off failed.
need to flash recovery to stock recovery/ current recovery could brick phone whjen flashing stock RUU .IMG ROM
Not positive that i have the recovery that makes brick sandwich, becasue there is a old recovery that does not allow certain system files to fetch the files needed to install RUU.
Need to verify recovery/flash stock RUU rom
if recovery is not verified / flash stock recovery i Have TeamWin 2.4.4.0 TWRP
proceed to write radio
Click to expand...
Click to collapse
USE RUU.EXE not .IMG and recovery dont brick your phone i did those steps as i wrote and i have my phone nice and also i flashed stock RUU.EXE after i made S-Off and Used Config.dat and it works pretty nice

The file link that you requested is not valid.

[Q] Unable to unlock the bootloader

So after trying to manually install a ota for my htc one, I am unable to unlock the boot loader since I cant do it through htcdev or through any other means( adb is unable to dectect my phone) everything was wiped.Thanks for helping, I am new to all this.

RubberThunder said:
So after trying to manually install a ota for my htc one, I am unable to unlock the boot loader since I cant do it through htcdev or through any other means( adb is unable to dectect my phone) everything was wiped.Thanks for helping, I am new to all this.
Click to expand...
Click to collapse
Can you boot into the bootloader?

RubberThunder said:
So after trying to manually install a ota for my htc one, I am unable to unlock the boot loader since I cant do it through htcdev or through any other means( adb is unable to dectect my phone) everything was wiped.Thanks for helping, I am new to all this.
Click to expand...
Click to collapse
go to settings > about > software information > more : hit Build number 7 times till you get message (you are now developer)
go back to the settings screen, scroll down, you will found new option called (Developer options)
hit it, new message will appear , hit (OK)
now in the (upper right ) hit the (off) icon to change to (on)
find (USB debugging) and mark it
now adb will detect your phone
about the UNLOCK_CODE.bin, re-send your phone "token code" to the HTCDev.com to receive the UNLOCK_CODE.bin again and try again

question regarding Sim Unlock Guide [Desire C]??

Guys, I want to unlock my sim on Desire C. I managed to get phone bootloader unlocked, Rooted, HTC driver installed and a busybox install.
I am following the steps "Sim Unlock Guide [Desire C]"http://forum.xda-developers.com/showthread.php?t=2024422
but the procedure I don't follow.
1) Do I connect the phone with PC with USB cable under bootloader Mode or Recovery mode? I connect the phone with pc with USB, but it is NOT in Bootlaoder or Recovery Mode. I just have the phone boot normally
2) How does busybox work? i just choose the first one in play store, once installed, it is asking for root access, then loading a lot of files, and it asks me to install again, so I did. what else I need to do.
3) I enter command "ADB Shell" in Windows-cmd, a bunch of thing flashed. I didn't get " sh-3.2#" , after I enter "SU", nothing happend on my phone, in cmd command prompt, it says "SU is not recogized command"
I don't think my PC is talking to the phone. what do I do?
many thanks for your help.

i final figure out the problem, it's so silly, i just need to put in a microSD card in the phone, then adb command works perfectly, just log in to phone normally, plug in to your pc via USB, run the adb shell as instructed, unlock the phone is seconds
remember unlock code is 8 digits long, I got two sets of number, one set is 16 digits, it is not the unlock code

Error unlocking HTC 626s bootloader?

I have a HTC Desire 626s purchased from virgin mobile and I wish to unlock my bootloader and root the device. So I have been following the HTCDev bootloader unlocking instructions.
But whenever I execute the downloaded RUU given to me by the instructions to update the ROM I keep getting
Code:
ERROR [170]: USB CONNECTION ERROR
even though the phone is plugged in and USB debugging is enabled along with OEM unlocking...
I have tried extracting the rom.zip file from the utility, renaming it accordingly, and then putting it on the external SD card to attempt flashing the rom manually but then I get
Code:
-2, 10 fail to flash via downloadzip
from the bootloader/download mode.
So is there a way to fix the error or some other method to flash a new rom?

Tutorial: Root LeEco S3

After seeing people not being able to root their S3 and rooting mine successfully, I have decided to make this tutorial to help those out there. This tutorial covers the procedures I took to successfully root my LeEco S3 US edition with EUI 5.8.018S and Snapdragon 652 processor. My phone is permantly rooted and has permanent TWRP recovery.
Make sure your phone has developer options and has usb debugging as well as the option to unlock the bootloader enabled
First off, download the AIO Toolkit created by Rishabh Rao here
Secondly, open the toolkit. Make sure to turn off your antivirus to avoid any interruptions. Once in the toolkit, select item 6 and allow the program to download necessary files. After the files have downloaded, select item 1 to install ADB/Fastboot USB drivers. During this process, PDA Net will prompt you to connect your phone to the computer. It will download the client onto your computer and install the PDA Net application onto your phone. When the drivers are fully installed, close the toolkit.
Open command prompt and run ADB. With your phone plugged in and in recovery mode, type fastboot oem unlock-go and you should see it attempting to unlock the bootloader. If you get a successful message of unlocking your bootloader, you are ready to move on to the next step as this is a temporary unlock. Close the command prompt.
Open the toolkit again, select item 6 and then select item 3 to unlock bootloader completely. When it has finished, go back to select item 4 to check and see if the bootloader has been unlocked. If so, move on to selecting item 5 to flash the latest TWRP recovery.
When the TWRP recovery has installed, if it has not booted into recovery by itself, hold down power + volume up to enter it. You will see the recovery all in the chinese language. Simply swipe the unlock to proceed and from the menu, select the box to the right and three down (which is settings). There, select the globe icon and scroll down to select the english language. Now that you can read what is there, go back to the main menu and select wipe to completely wipe the phone back to factory defaults. When it has finished, go back and select Advanced > Tools > Root Device. Your phone will now be rooted when you reboot and will have the latest TWRP recovery installed.
- If you receive the error message saying the device is locked while you are trying to unlock the bootloader from the toolkit, you need to run ADB again to temporary unlock the bootloader.

Quick question - will this only work on 18s and is it possible to update the firmware and keep root after doing this? Or would it work after updating to I think 21s which is the latest?
Thank you!

Hi
Can you break this down further with pictures too? How do I do the command prompt ABD thing?

Root
was this the easiest way? I'm going to try it in two days. Scared to mess my phone up though..

This method does not work on the 23s ROM. Does nothing

What's the best way? Simple way I mean?

Worked for anyone?

these instructions are for the le s3 with SNAPDRAGON processor, not for the MEDIATEK x20 that is where we have the problem

Just got this phone and gonna try this out, thanks ;p
---------- Post added at 11:06 AM ---------- Previous post was at 10:13 AM ----------
Actually Ima wait...I've never rooted using TWRP Recovery so not quite familiar with it after the phone's been rooted. I've only used a couple of the one-click root apps, KingRoot and KingoRoot, for a couple phones.

Rooted it fine, now I need to figure out what I can do ;P <--- noob

How were you able to successfully root the phone?
GWARslave119 said:
Rooted it fine, now I need to figure out what I can do ;P <--- noob
Click to expand...
Click to collapse
How were you able to successfully root the phone?

i dont know what to do,, it says "waiting for device" what should i do ? i already installed the 15 sec ADB something like that.. i need your help plsssss

Rooting Le S3.
XtraTerr3sTRiAL said:
After seeing people not being able to root their S3 and rooting mine successfully, I have decided to make this tutorial to help those out there. This tutorial covers the procedures I took to successfully root my LeEco S3 US edition with EUI 5.8.018S and Snapdragon 652 processor. My phone is permantly rooted and has permanent TWRP recovery.
Make sure your phone has developer options and has usb debugging as well as the option to unlock the bootloader enabled
First off, download the AIO Toolkit created by Rishabh Rao here
Secondly, open the toolkit. Make sure to turn off your antivirus to avoid any interruptions. Once in the toolkit, select item 6 and allow the program to download necessary files. After the files have downloaded, select item 1 to install ADB/Fastboot USB drivers. During this process, PDA Net will prompt you to connect your phone to the computer. It will download the client onto your computer and install the PDA Net application onto your phone. When the drivers are fully installed, close the toolkit.
Open command prompt and run ADB. With your phone plugged in and in recovery mode, type fastboot oem unlock-go and you should see it attempting to unlock the bootloader. If you get a successful message of unlocking your bootloader, you are ready to move on to the next step as this is a temporary unlock. Close the command prompt.
Open the toolkit again, select item 6 and then select item 3 to unlock bootloader completely. When it has finished, go back to select item 4 to check and see if the bootloader has been unlocked. If so, move on to selecting item 5 to flash the latest TWRP recovery.
When the TWRP recovery has installed, if it has not booted into recovery by itself, hold down power + volume up to enter it. You will see the recovery all in the chinese language. Simply swipe the unlock to proceed and from the menu, select the box to the right and three down (which is settings). There, select the globe icon and scroll down to select the english language. Now that you can read what is there, go back to the main menu and select wipe to completely wipe the phone back to factory defaults. When it has finished, go back and select Advanced > Tools > Root Device. Your phone will now be rooted when you reboot and will have the latest TWRP recovery installed.
- If you receive the error message saying the device is locked while you are trying to unlock the bootloader from the toolkit, you need to run ADB again to temporary unlock the bootloader.
Click to expand...
Click to collapse
Hi Everyone. I recently got a new le s3 x522. Its great only that sim 2 slot doesn't connect to mobile data. I have tried rooting so that I can use build prop editor to fix this, but rooting has become a real problem. I used Kingo root, framaroot but not successful. I have downloaded AIO toolkit on pc but installng is a problem. Please guide me on how to install AOI toolkit on pc. I pretty new to this things you know. Any help will be greatly appreciated.