Database Develop

[q] lg l90 d415

After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.

nemesis101x said:
After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.
Click to expand...
Click to collapse
See FAQ thread for getting into recovery.
[SIZE=+1]Q14: I've flashed a custom recovery but what are the key combos to get there?[/SIZE]
Power off the device
Press and hold Power + Volume down
When the LG logo appears on the screen, quickly release the Power button, still holding the Volume down button, and press and hold Power again until the "Factory Reset" screen appears. Don't worry, this won't reset the device.
Use the volume keys to navigate up and down and Power to select. Scroll down and select "Yes" and repeat once more. It may take up to 10 seconds for the device to boot to recovery.

I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?

nemesis101x said:
I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?
Click to expand...
Click to collapse
You've got an older recovery it seems. Download Philz-Touch from my thread, the link you posted, or get TWRP from this thread
Since you're having booting issues, use fastboot to flash the recovery.

Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Edit: I formatted everything again and tried to reinstall the cyanogenmod and GApps. Seems like I just had to wait for the boot screen.

nemesis101x said:
Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Click to expand...
Click to collapse
Put device in fastboot mode. ADB can't detect the device when it's in fastboot mode.
Type:
Code:
fastboot devices
You should see a listing similar to "adb devices" output.
Copy recovery image to the same folder fastboot is in. Then type:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot boot recovery.img
First one will only write the recovery image to the device. The second on will write the image to the device and should then boot the device to the recovery.
EDIT:
Yes, the first boot takes a couple minutes.

Seems I just had to wait for bootscreen.
How do I turn data on and off?

nemesis101x said:
Seems I just had to wait for bootscreen.
How do I turn data on and off?
Click to expand...
Click to collapse
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
There are several ways. I'm guessing you're new to CyanogenMod ROMs?

shinobisoft said:
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
Click to expand...
Click to collapse
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?

nemesis101x said:
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?
Click to expand...
Click to collapse
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk

shinobisoft said:
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
Yeah, I got it.
Thank you for all your help!

LG-P880 Firmware flash,upgrade,downgrade improved.

So as LG-P880 flashing instructions were too much hassle for my taste
Here it is a very simple way to upgrade/downgrade your phones easy peasy
Everything will be gone so backup first!
Download this:
Mirror 1:
http://s000.tinyupload.com/index.php?file_id=01589528474127578975
Mirror 2:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
Unrar and copy your downloaded new firmware inside LG Flash Tool 2014 folder
Browse to Driver folder and install/double click LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe file.
Shutdown and remove SIM&EXTSDCARD from the back of the phone. Leave battery in-place don't take it out.
Press and hold Vol(-) connect usb cable coming from pc->download mode
Run LGFlashTool2014.exe
Selections
CDMA or 3GQCT doesn't matter really
DIAG
KDZ file location
then select preferred flash mode
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
Done, enjoy!
Update:
If you get
This mode is for data backup at service center ...
Click to expand...
Click to collapse
in recovery repeat flashing the KDZ and you will get the stock recovery this time.

Wow, thx Demetris, you are my savior just in time.
With the online upgrade the phone is always stuck in a bootloop and the old offline method just didn't work as it gave me a file extract error, although I know I've done everything correct (maybe the issue was leaving the sim and sd card inside or selecting 3GQCT?)
Btw and fyi, the CSE method is only available if CDMA is selected.
Thanks for making this fast and simple tutorial that even works ^^

Thank you for the great tutorial. I tried exact accordance with my LG-P880 to update. Unfortunately it did not work, the device starts but then remains at the LG logo, no further reaction. Restart / reset no improvements. Options in Android System recoveryy <3e> do not work. Do you have an idea how I can still save my beloved P-880?

Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol +(99% of times you need to use - but for me was +) and press power on. On stock recovery factory reset and now phone will boot

I did and the unit freezes. The figure Android is flat and shows an exclamation mark.

jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f

KDZ
where can we find the original KDZ files?
Thanks in advance! :highfive:

Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
For me it worked without a factory reset, just flashing and restarting.
Forget what I said, i think I did a factory reset and wiped nv partition before I flashed the new firmware with this tutorial.
@alberteske all firmwares can be found here: http://lg-phone-firmware.com/index.php?id_mod=15
but some links are broken, after clicking on a link you have to replace the "%2F" at the end of the adress with a "/"

Demetris said:
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f
Click to expand...
Click to collapse
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.

baseband change without flashing whole kdz?
isn't a way to extract the baseband files and flash them without having to flash kdz + unlock + re-install everything...?
thanks a lot in advance Demitris!

jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
You sure is a P880 and not a P880G?

Demetris said:
You sure is a P880 and not a P880G?
Click to expand...
Click to collapse
Yes, LG-P880

jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
also for me it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset
---------- Post added at 07:49 PM ---------- Previous post was at 07:45 PM ----------
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset

I cant go on... stucked on Bootloader..:
S/W Upgrade
Please wait
while upgrading...
i did what you wrote but cant go forward. I got this message after trying to put: normal flash: Please run or install ActiveSync program
/edit:
Connection to server fialed. Try again in a moment. (pressed OK).
now i am stucked at:
Upgrading your phone....
Do not disconenct your phone or remove you battery until upgrade is completed. Calling and messagin functions are not available druging the update process......

Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
ok.
Think here you mean:
press and hold [vol -] and [power] until you got the "android recovery figure"
then clear cache and make factory reset

Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
Somehow my phone got to the LG logo but is in bootloop. Tryed vol+ and power. I can get to stock recovery, but how to factory reset from there?

Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app

xperia u20i said:
Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app
Click to expand...
Click to collapse
correct.
used his new tool and tutorial. It worked then.

EB20XY said:
correct.
used his new tool and tutorial. It worked then.
Click to expand...
Click to collapse
i am stucked (again on LG logo)... pressed vol+ and power on and i see the Revocery mode (by LG) - written: This mode is for data backup at service center. After removing and reataching batter press power key to reboot and keep it using. Well this aint working... Only home button works (in recovery mode) and i dont see anything else, where to make a factorty reset...
/edit:
vol- and power got me into the recovery menu. Factory reset and now its no bootloop. Well let me see on...

Vol- was the key
Sent from my Optimus 4X HD using XDA Free mobile app

[Help] Unlocking bootloader D-405N

I use this guide: http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
But I cant find recovery.img on my phone and I use another recovery. Now I want to go in Recovery Mode but I have only LG logo and in left up corner is:
[490] fastboot_int()
[590] USB init ept @ 0xffdc000
[610] udc_start()
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.

damianww said:
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
Click to expand...
Click to collapse
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads

olinojephanko said:
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
Click to expand...
Click to collapse
But which is on my D-405N?

damianww said:
But which is on my D-405N?
Click to expand...
Click to collapse
all of them, its for all lg l90 D4xx devices.
I recommend using this one TWRP_2.8.4.0_160115_L90.img

Ok It's done, thank you. But i have another problem... I put on my SD card ROM but Team Win Recovery Procjet doesn't see zip file. Why? SD card must be in Ext2?

sd card should be in fat32
make sure you are looking into right directory, in twrp you can choose between internal and external sdcard. if you cant see it on external memory try putting it into internal.

I have another problem... -.- I install ROM but when i turn on phone is LG logo, T-mobile logo and I wait and nothing. Someone can help me?!

which rom did you install?
maybe try to do full wipe and reinstall it

olinojephanko said:
which rom did you install?
maybe try to do full wipe and reinstall it
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/development/rom-crystal-pa-8-0-crx-team-t2928842
But how can I go into Recovery Mode? System stopped on T-mobile logo..

just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery.
Click to expand...
Click to collapse

olinojephanko said:
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
Click to expand...
Click to collapse
I make factory reset and i have Crystal PA (I don't install that after factory reset O.O) Thanks a lot!!

TWRP Galaxy J1 2016 Sm-J120H Spreadtrum SC8830 Really Working (Brazilian devices)

(DISCONTINNUED
This TWRP is only for Speadtrum 3G!!!!
Hi folks!
Finally we have a twrp for your Sm-j120H Spreatrum that works! Here's the link:
Root SM-J120H working.rar
http://www20.zippyshare.com/v/XmD4XuEW/file.html
If you want to test (do it for your own risk)!
STEPS:
1 - Unzip file on your computer;
2 - Open Odin folder and copy the supersu zip file to your internal memory (without unzip it);
3 - Open Odin (double click on blue icon);
4 - Click on "AP" icon and select the twrp tar file on Odin folder (j1 (6).tar);
5 - Turn on "Unlock OEM" and "USB Debugging" on Delevoper Options (Actvating Delevoper Options: seven clicks on Build Number - Software Info);
6 - Turn off your phone and turn on again holding Volume Down + Home Button + Power Button (Download Mode). When a screen with some texts appears, release all buttons and press Volume Up again to activate the Download Mode;
7 - After this, connect your phone to your computer and click Start on Odin. Wait until your device restarts;
8 - Disconnect your phone to your computer and turn it off. Turn it on holding Volume Up + Home Button + Power Button (Recovery Mode). When your phone vibrates and appears J1 6 logo, release all buttons. If worked, TWRp will starts;
9 - Select the language, click on Read Only and the TWRP starts. After this, click on Install and search The Supersu zip you copied. Click on it and drag the flash file. Wait finish it. Restart the system. Done!
Credits: Aldous Cariño (Galaxy J1 Edition Phillipines Facebook Group - (https://www.facebook.com/groups/SamsungGalaxyJ12016EditionGroupPhilippines/)
IMPORTANT!!!!!!
This twrp was tested and worked on brazilian devices. Others had some problems. Test it and comment your feedback here!
If you are a developer and interests to work on this file, but doesn't have the device, i'll be glad to help being your beta tester!!!!
If you need the stock rom, download it from this site: https://samsung-firmware.org/model/SM-J120H/
Thanks!

I tried this on a SM-J120M from Colombia.
Recocvery flashed OK, phone rebooted.
Turned it off, tried to enter recovery, android robot appears "installing system update" or something like that.
After a few seconds, standard recovery appears and not TWRP.
So I figured that the stock rom somehow replaces the custom recovery at first boot.
Flashed again but after Odin finished, I pulled the battery at once.
Tried again to enter recovery, this time a red text above the J1 logo shows "Recovery is not seandroid enforcing"
Pulled the battery again and turned on, phone booted normally, but twrp recovery was again replaced with standard recovery.
I'm on the latest firmware and this phone until now can not be rooted and no custom recovery seems to be available.
Somehow "knox" was set to 1 in the process, meaning warranty void.
Cheers.

Well, this has been tackled finally
Key issue was the right TWRP recovery.
Someone on Youtube posted the instructions and files titled: RECOVERY TWRP PARA SAMSUNG J1 2016 (TODAS LAS VERSIONES)
This time the TWRP recovery did work, after that I flashed the SuperSu from TWRP and all was finished.
Next I'll be looking for a custom rom, but so far very happy with the results.
Cheers.

escorpiompom said:
Well, this has been tackled finally
Key issue was the right TWRP recovery.
Someone on Youtube posted the instructions and files titled: RECOVERY TWRP PARA SAMSUNG J1 2016 (TODAS LAS VERSIONES)
This time the TWRP recovery did work, after that I flashed the SuperSu from TWRP and all was finished.
Next I'll be looking for a custom rom, but so far very happy with the results.
Cheers.
Click to expand...
Click to collapse
Hello,
Could I have a link to the files that work for the J120M? I have the same phone and I think I found what you're talking about but I have the same issue with the stock recovery showing up instead.
Thanks!
EDIT: Actually, do I need to use TWRP? Can't I just "install update from external storage" with the stock bootloader?

Sure, I didn't post the link because it may not be allowed on this board (for newbies like me).
If you just put that title in Youtube it shows as the first result.
Anyway, here is the direct link for all the files:
Code:
https://www.datafilehost.com/d/296cd14c
Disable the download manager that is checked by default.
Use odin to flash TWRP, disable auto reboot and after flashing enter recovery at once with vol up+home+power buttons.
You may get a warning in red about recovery not enforcing blaba, just wait until TWRP shows and release the buttons.
It's not possible to flash SuperSU from stock recovery, you need a custom recovery like TWRP.
I couldn't find CWM for this phone, but anyway I like TWRP more.
Cheers.

escorpiompom said:
Sure, I didn't post the link because it may not be allowed on this board (for newbies like me).
If you just put that title in Youtube it shows as the first result.
Anyway, here is the direct link for all the files:
Code:
Disable the download manager that is checked by default.
Use odin to flash TWRP, disable auto reboot and after flashing enter recovery at once with vol up+home+power buttons.
You may get a warning in red about recovery not enforcing blaba, just wait until TWRP shows and release the buttons.
It's not possible to flash SuperSU from stock recovery, you need a custom recovery like TWRP.
I couldn't find CWM for this phone, but anyway I like TWRP more.
Cheers.
Click to expand...
Click to collapse
Ahh, thanks! As it turns out I did find the correct link, but the trick was to immediately enter into recovery mode after flashing without letting the phone fully boot first. Got my phone rooted now, thanks a bunch!

This method workin on 100%/ Thanks!

amebablues said:
Hi folks!
Finally we have a twrp for your Sm-j120H Spreatrum that works! Here's the link:
Root SM-J120H working.rar
http://www20.zippyshare.com/v/XmD4XuEW/file.html
If you want to test (do it for your own risk)!
STEPS:
1 - Unzip file on your computer;
2 - Open Odin folder and copy the supersu zip file to your internal memory (without unzip it);
3 - Open Odin (double click on blue icon);
4 - Click on "AP" icon and select the twrp tar file on Odin folder (j1 (6).tar);
5 - Turn on "Unlock OEM" and "USB Debugging" on Delevoper Options (Actvating Delevoper Options: seven clicks on Build Number - Software Info);
6 - Turn off your phone and turn on again holding Volume Down + Home Button + Power Button (Download Mode). When a screen with some texts appears, release all buttons and press Volume Up again to activate the Download Mode;
7 - After this, connect your phone to your computer and click Start on Odin. Wait until your device restarts;
8 - Disconnect your phone to your computer and turn it off. Turn it on holding Volume Up + Home Button + Power Button (Recovery Mode). When your phone vibrates and appears J1 6 logo, release all buttons. If worked, TWRp will starts;
9 - Select the language, click on Read Only and the TWRP starts. After this, click on Install and search The Supersu zip you copied. Click on it and drag the flash file. Wait finish it. Restart the system. Done!
Credits: Aldous Cariño (Galaxy J1 Edition Phillipines Facebook Group - (https://www.facebook.com/groups/SamsungGalaxyJ12016EditionGroupPhilippines/)
IMPORTANT!!!!!!
This twrp was tested and worked on brazilian devices. Others had some problems. Test it and comment your feedback here!
If you are a developer and interests to work on this file, but doesn't have the device, i'll be glad to help being your beta tester!!!!
If you need the stock rom, download it from this site: https://samsung-firmware.org/model/SM-J120H/
Thanks!
Click to expand...
Click to collapse
hi bro
not working ext sd card or otg . how to fix it ? iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you

anitamobile said:
hi bro
not working ext sd card or otg . how to fix it ? iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
Click to expand...
Click to collapse
This file is for Spreadtrum 3G devices. OTG not working at all. FOr ext card, try to wipe data and cache after install and reboot.

tried it on my SM-J120G, but failed .. all steps completed but when i started the phone in recovery mod, it got stuck at j1 2016 logo and a message in red fonts saying ''RECOVERY IS NOT SEANDROID ENFORCING''. After i just tried to switch off and on, but the screen dosent respond. After holding all physical button, vol up-dn, power and home, it got restarted in normal mode.

device tree
please give me device tree of this device .. please

Does it works in sm-j120G??

anitamobile said:
hi bro
not working ext sd card or otg . how to fix it ? iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
Click to expand...
Click to collapse
The problem has been resolved
new recovery twrp :fingers-crossed:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
---------- Post added at 12:11 AM ---------- Previous post was at 12:06 AM ----------
amebablues said:
This file is for Spreadtrum 3G devices. OTG not working at all. FOr ext card, try to wipe data and cache after install and reboot.
Click to expand...
Click to collapse
The problem has been resolved :good:
new TWRP :highfive:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136

Project Discotinnued
Sorry taking too long to answer...I'm not using this device anymore. Maybe this link help you: https://github.com/joenka/android_device_j120h
Best regards

shugash said:
Does it works in sm-j120G??
Click to expand...
Click to collapse
Not testing. If you waana try, do it your risk.

syria-droid said:
The problem has been resolved
new recovery twrp :fingers-crossed:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
---------- Post added at 12:11 AM ---------- Previous post was at 12:06 AM ----------
The problem has been resolved :good:
new TWRP :highfive:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
Click to expand...
Click to collapse
Ok. But your device is Speadtrum 3G? This twrp is for this model.

amebablues said:
Ok. But your device is Speadtrum 3G? This twrp is for this model.
Click to expand...
Click to collapse
I know
the problem Present in all phones model (j120h)

Rooted j120g
Bro I have rooted my j120g
Want to know how to root contact me bro
[email protected] or fb id skrillex cario

Hai is it possible to flash stock 120g firmware on 120h ? Please reply

Help me to Root my Samsung Galaxy J1 (2016) SM-J120H
Sir I really need your help. What is the first thing to do before going into Rooting method? Do I need to backup any Files or what? Thnak you. Guide me please. Thank You

P8 lite stuck at huawei logo

Hi all my Huawei p8 lite fell and lcd broke, i sended it to cellphone shop to replace LCD, now if i switch my phone on it boot loop on huawei logo it switches on and of the whole time it dont want to charge allso, if i plug in charger it just go straight to huawei logo and starts looping, volume down or up or both and power button doesnt work i managed to hold down volume button and plug in usb cable then it takes me to Fastboot&Rescue mode HiSuite opens on my pc but it doesnt pick up my phone it says on the bottom of the screen PHONE UNLOCKED, any help would be greatly aprecciated

Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.

persona78 said:
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
Click to expand...
Click to collapse
thanks alot will try later and ask for advice if im stuck

GoldenJet said:
thanks alot will try later and ask for advice if im stuck
Click to expand...
Click to collapse
ok

persona78 said:
ok
Click to expand...
Click to collapse
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
dont know if it matters but im from South Africa

GoldenJet said:
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
Click to expand...
Click to collapse
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img

GoldenJet said:
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
Click to expand...
Click to collapse
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.

persona78 said:
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
Click to expand...
Click to collapse
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?

GoldenJet said:
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
Click to expand...
Click to collapse
Yes that mean your device is already unlocked
Yes use "cmd" like you did before

Schubi97 said:
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Click to expand...
Click to collapse
hope it works downloading now the twrp img

GoldenJet said:
hope it works downloading now the twrp img
Click to expand...
Click to collapse
if you need further help just text me

ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
allso tried in cmd to enter "adb reboot recovery" it says "error:device "null" not found

GoldenJet said:
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
Click to expand...
Click to collapse
hold up the volume up and the power button all the time till you enter twrp !

Schubi97 said:
hold up the volume up and the power button all the time till you enter twrp !
Click to expand...
Click to collapse
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu

GoldenJet said:
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
Click to expand...
Click to collapse
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html

Schubi97 said:
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Click to expand...
Click to collapse
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping

GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Check this
https://forum.xda-developers.com/showpost.php?p=67358156&postcount=14
I noticed that model is "not the same" as our version so probably our twrp doesn't work properly, i know there is a version that probably works but i need to find it.
For now check the link above.
This is full post for your version
https://forum.xda-developers.com/p8lite/general/huawei-p8-lite-firmware-ale-l02-andriod-t3380885
.

GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Maybe they damaged your device(battery) while repairing the LCD :/

You can try thi twrp to if you want.
https://mega.nz/#!B8R0xJYb!E8Ldq5_IQ3WmztjZZ-0ykrwVawr0ArPxckAEiV7WytM
.

Schubi97 said:
Maybe they damaged your device(battery) while repairing the LCD :/
Click to expand...
Click to collapse
thanks for the info would aprecciate it if you can get me the right twrp. is that firmware you gave me the full OTA the correct one for my device? they plugged another battery on the phone when mine was out and it did the same thing looping on the huawei logo, just wondering do you call this a soft brick that i have with my phone or is it a hard brick?