compre un huawei ascend p7 L10 en marzo y no arranca - Huawei Ascend P7

Mod Edit : Use only English language on XDA. If you have trouble in doing so kindly use google translator.
OP is edited to english
Good afternoon;
Buy a Huawei Ascend P7 L10 in March this year, he ran the application of recovery I went out and will not start, it reboots and will not start, it stays in the image of Huawei and off and is turned on only but remains in the image I've tried to install him several versions Update.app via adb and nothing to start.
What can I do.
Cheers,

omarnavea said:
Buenas Tardes;
Compre un huawei ascend p7 L10 en marzo de este año, le corri la aplicacion de recovery se apago y no prende, se reinica y no arranca, se queda en la imagen de huawei y se apaga y se prende solo pero se queda en la imagen, he probado en instalarle varias versiones update.app via adb y nada que arranca.
Que puedo hacer.
Saludos,
Click to expand...
Click to collapse
Write it in English.

Good afternoon;
Buy a Huawei Ascend P7 L10 in March this year, he ran the application of recovery I went out and will not start, it reboots and will not start, it stays in the image of Huawei and off and is turned on only but remains in the image I've tried to install him several versions Update.app via adb and nothing to start.
What can I do.
Cheers,

The apdate.app does not install vía adb... Tray this... Put an update.app on this path... Sd/dload... Shutdown and get On while hold the volumen +- at the same time... Will install ROM... Just wait till finish... Remember use preferly the versión that your phone come with...

Related

Unlock bootloader Latinamerica (Perú, Chile, Argentina, Colombia, Panamá, etc)

En castellano en el 2do post.
After an arduous search , I managed how to unlock the bootloader my smart phone.
The problem: In Latin America the cellular band we use is 850Mhz/1900Mhz while the rest of the world uses 900Mhz/1800Mhz . If a European rom is installed in our smartphones these will fail because they can not connect to the network.
So it was not possible to unlock our bootloader because none JB version existed for Latin America in the official list of LG and we could not install a version of another region.
Solution: After much searching I read somewhere, I honestly do not remember where, that a mexican said that he had just bought a P880 and this came with JB . Then I began to search for this rom, after a couple of hours I managed to find it at a chinese download page. It was a painful download 50Kb/s (I have a 10mb internet speed) , I tried it and IT WORKED !
Too many words , this is how I did it:
- The original instructions to install it I read it from here: http://forum.xda-developers.com/showthread.php?t=1861942
- I do NOT responsible for any problems or inconvenience you may have with your smartphone by following this procedure.
1. Download from here dz . https://mega.co.nz/#!vN0FUDrK!5yr12FCdFAQGNfs4T5CxtBB1p3DMUQQG6qWV7HtGKn0 ( 571Mb )
2. Download drivers: https://mega.co.nz/#!3ckwVZQQ!wGvu5uKH5lZpalYUSEaIr_4-54N_8q-bfLU-_cEkM3E
3. Download OmapFlashInstaller: https://mega.co.nz/#!SB9QnRAL!FIrimclzdqUpQzXZoQqKkhBDdDEp0DDdmUwHmZO1Xls
4. Download LGFlashTool : http://www.mediafire.com/?pzqr0gsw8u9erxl
5. Install in this order:
a) LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe
b ) LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe
c ) OMAPFlashInstaller.msi
d ) LGFlashTool
6. Turn off the phone and remove the sim card and sd card
7. Press and hold the Volume Down button and connect the USB cable
8. Wait for Windows to install the drivers . Right click on My Computer > Manage > Device Manager , look for LGE CDMA USB SERIAL PORT right click > Properties> Com port and change it to 41
9. Run as administrator LGFlashTool
10. Select the dll that was in LG 880AT V20c folder
11. In S / W select the. Dz
12. Check the USB option and OK
13 . Click on the COM port settings , select 1 ( uncheck all others)
14 . Click start and port 1 should read: READY
15 . Disconnect the USB cable and turn off the computer
16 . Wait 5 seconds
17 . Press the Volume Down button and connect the usb cable to your smartphone
18 . When you start to upgrade you can release the button volume
19 . When the computer restarts finished and ready
Unlock bootloader :
They can test for this post : http://forum.xda-developers.com/showthread.php?t=2224020
To me it was using my BL_unlock.zip Photo
Internet doesnt work? You need to find on internet the right APN configuration and configure your phones.
Any questions comment me .
Greetings and God bless.
Español
Despúes de una ardua busqueda logré liberar el bootloader mi celular inteligente.
El problema: En Latinoamerica se usa la banda celular 850Mhz/1900Mhz mientras que el resto del mundo usa 900Mhz/1800Mhz. Si instalamos una rom europea en nuestros smartphones estos fallaran porque no pueden conectarse.
Por eso no era posible desbloquear nuestros bootloader pues no existia una version JB para latinoamerica y no podiamos instalar una versión de otra región.
Solución: Despues de mucho buscar lei en alguna parte, sinceramente no recuerdo donde, que un Mexicano decia que acababa de comprar un P880 y que este vino con JB. Empecé entonces con la busqueda de esta rom, luego de un par de horas logré encontrarlo en una página de descargas china. Fue una penosa descarga a 50Kb/s pero al fin terminó, lo probé y FUNCIONÓ!!!
Muchas palabras, asi es como lo hice:
- Las instrucciones originales para instalarlo lo leí de aca: http://forum.xda-developers.com/showthread.php?t=1861942
- NO me hagan responsable por los problemas o inconveniente que tengan con su equipo al seguir este procedimiento.
1. Descargar el .dz desde aca: https://mega.co.nz/#!vN0FUDrK!5yr12FCdFAQGNfs4T5CxtBB1p3DMUQQG6qWV7HtGKn0 (571Mb)
2. Descagar los drivers: https://mega.co.nz/#!3ckwVZQQ!wGvu5uKH5lZpalYUSEaIr_4-54N_8q-bfLU-_cEkM3E
3. Descargar OmapFlashInstaller: https://mega.co.nz/#!SB9QnRAL!FIrimclzdqUpQzXZoQqKkhBDdDEp0DDdmUwHmZO1Xls
4. Descagar LG FlashTool: http://www.mediafire.com/?pzqr0gsw8u9erxl
5. Instalar en este orden:
a) LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe
b) LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe
c) OMAPFlashInstaller.msi
d) LGFlashTool
6. Apagar el teléfono y retirar la tarjeta sim y la tarjeta sd
7. Mantener presionado el boton de volumen abajo y conectar el cable USB
8. Esperar que Windows instale los drivers. Dale click derecho a Mi PC > Administrar > Administrador de dispositivos, buscar LGE CDMA USB SERIAL PORT click derecho > Propiedades > Com port y cambiarlo a 41
9. Ejecuta LGFlashTool como administrador
10. Selecciona el dll que estaba dentro de la carpta de la primera descarga
11. En S/W selecciona el archivo .dz
12. Marca la opción USB y OK
13. Click en la configuración de puerto COM y selecciona 1 (desmarca los demas)
14. Click start y el puerto 1 debería decir: READY
15. Desconecta el cable USB y apaga el equipo
16. Espera 5 segundos
17. Presiona el boton de volumen abajo y conecta el cable usb al smartphone
18. Cuando empiece a actualizar puedes soltar el boton de volumen
19. Cuando termine el equipo se reiniciará y listo
Desbloquear bootloader:
Pueden probar las de este post: http://forum.xda-developers.com/showthread.php?t=2224020
A mi me resultó usando el archivo BL_unlock.zip
Cualquier duda me comentan.
Saludos y que Dios los bendiga.
OmapFlashInstaller? I'm sure that's not needed.
Sent from my OmniROM-powered LG Optimus 4X HD
Help please
Hi, when i try to install the LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe, gives me error
Says version 3.08.001 is allready installed and this is an older version. so, in order to install this first i have to unnistall my curent version.
Any idea what should i do?
Monchito007 said:
Hi, when i try to install the LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe, gives me error
Says version 3.08.001 is allready installed and this is an older version. so, in order to install this first i have to unnistall my curent version.
Any idea what should i do?
Click to expand...
Click to collapse
If you already have the proper drivers installed you don't need to reinstall them. Probably they are installed by LG Tool, they should be working.
Sent from my LG-P880 using XDA Premium 4 mobile app
My Optimus 4X is from Claro - Perú, a latin american version, and I just flashed the first leaked V20A when it came out to be able to unlock the bootloader with laufersteppenwolf's procedure.
A friend of mine also told me he manually modified /sys/firmware/fuse/odm_reserved to 40000000c0 and it worked (using info taken from this thread: http://forum.xda-developers.com/showthread.php?t=2251407), but Idk if it is an adequate solution.
mario.gacv said:
My Optimus 4X is from Claro - Perú, a latin american version, and I just flashed the first leaked V20A when it came out to be able to unlock the bootloader with laufersteppenwolf's procedure.
A friend of mine also told me he manually modified /sys/firmware/fuse/odm_reserved to 40000000c0 and it worked (using info taken from this thread: http://forum.xda-developers.com/showthread.php?t=2251407), but Idk if it is an adequate solution.
Click to expand...
Click to collapse
Hi, I'm from Perú too.. and my phone company is Claro. :highfive:
I unlocked my bootloader using the file attached on this post: http://forum.xda-developers.com/showthread.php?t=2224020. BL-unlock_new.rar
After that I install Clockworkmod Touch Recovery and now I have Cyanogenmod 10.1.3
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Hola, soy de Perú también.. y mi compañía también es Claro. :highfive:
Desbloqueé mi bootloader usando el archivo adjunto en este post: http://forum.xda-developers.com/showthread.php?t=2224020. BL-unlock_new.rar
Después de eso instalé Clockworkmod Touch Recovery y ahora tengo Cyanogenmod 10.1.3
good job working that out, should be in the tutorials post

p7-L12 with EMUI 3.0

Hi all!
I wanna update my p7-L12 EMUI 2.3 to EMUI 3.0.. and i don't see where is this UPDATE.APP in this page emui .com /plugin.php?id=hwdownload
Only i found L00, L05-07, L09 but not L12...
Anyone know about this?
Thx 4 advance!
Change P-12 to P-10 first
Roldanhollow said:
Hi all!
I wanna update my p7-L12 EMUI 2.3 to EMUI 3.0.. and i don't see where is this UPDATE.APP in this page emui .com /plugin.php?id=hwdownload
Only i found L00, L05-07, L09 but not L12...
Anyone know about this?
Thx 4 advance!
Click to expand...
Click to collapse
First you must change the variant of your P-12 to P-10 with EMUI 2.3. There are some people who have already done this change, I also had P-12 installed in my cell phone, "Latinoamerican version" and I took the risk of changing ROM, it is very simple, you can find many roms to download, I started with B126, then B-133, B135, B136, B138 and B602 which works with 3.0 EMUI. HTCMANIA provides a good list of roms but I recommend you to read first XDA and HTCMANIA forums just before Performing any change to your cell phone. http://www.htcmania.com/showthread.php?t=876021
http://www.htcmania.com/showthread.php?t=928344
AFTER changing your variant rom from L-12 TO L-10 I recommend you to read this thread that explains to update from 2.3 to 3.0. Remember this update is in beta phase since final version has not released yet. http://forum.xda-developers.com/ascend-p7/general/ascend-p7-b602-emui-3-0-international-t2971697
Gracias por contestar!
Oye espera!!!
Veo que tu sabes español!!
Mira mejor hablemos en español.. me comentas que mejor cambie la variante de P7-L12 a P7-L10... Pero en la pagina solo aparecen para L00, L05-L07 y L09...
Ya tu lo hiciste con el tuyo?
Que pierdo con bajarme del L12 al L10? sabes algo de eso?
It is not possible.....
Roldanhollow said:
Oye espera!!!
Veo que tu sabes español!!
Mira mejor hablemos en español.. me comentas que mejor cambie la variante de P7-L12 a P7-L10... Pero en la pagina solo aparecen para L00, L05-L07 y L09...
Ya tu lo hiciste con el tuyo?
Que pierdo con bajarme del L12 al L10? sabes algo de eso?
Click to expand...
Click to collapse
It is not possible to talk in spanish despite that I am LatinoAmerican, but the thing is this forum is only in English and one of the mandatory rules to post here in XDADEVELOPERS is to write in English, otherwise the information you put here will be deleted and you might be banned. No pierdes nada, antes mejor pues el L-12 esta muy desactualizado y al pasarte a la version L-10 antes se actualiza y va más rapido y estable, te recomiendo buscar la ROM con la versión general sin operadora. If you need ROMS for our device, go here and it is in spanish: http://www.htcmania.com/showthread.php?t=876021
Be careful, never install ROMS with L-00 variant since these roms are for Chinese versions with double sim card.. Good luck and remember read first before performing any change and do it at your own risk...
Ok English so! hehe
Ok don't worry.. i'll talking english
Well.. I'm downloading C_Temp_Sophia-L10 L10V100R001C00B133SP01 Android 4.4.2, Emotion UI 2.3 General Version of Europe..
i decided download this because not are associate to enterprise telephony.
Comming soon, i'll install this UPDATE.app but for HiSuite program and next i'll install B602...
Wish me luck hehe!
Good luck!!!!
Roldanhollow said:
Ok don't worry.. i'll talking english
Well.. I'm downloading C_Temp_Sophia-L10 L10V100R001C00B133SP01 Android 4.4.2, Emotion UI 2.3 General Version of Europe..
i decided download this because not are associate to enterprise telephony.
Comming soon, i'll install this UPDATE.app but for HiSuite program and next i'll install B602...
Wish me luck hehe!
Click to expand...
Click to collapse
Good luck, do not forget to do a nandroid backup just is case.
b602 update.zip
hi again..
another question...
The update file (b602) have extension .zip and not .app...
how flash this?
This update.zip contain a UPDATE.APP but is only 32 mb...
Roldanhollow said:
hi again..
another question...
The update file (b602) have extension .zip and not .app...
how flash this?
This update.zip contain a UPDATE.APP but is only 32 mb...
Click to expand...
Click to collapse
copy update.zip (don't extract it) in your sdcard/dload folder and then open updater app and choose update from local
Wrong
Roldanhollow said:
hi again..
another question...
The update file (b602) have extension .zip and not .app...
how flash this?
This update.zip contain a UPDATE.APP but is only 32 mb...
Click to expand...
Click to collapse
You do not need to uncompress the FOLDER UPDATE.ZIP, just put it in the /dload folder and UPDATE with ACTUALIZACIONES Y ACTUALIZACION LOCAL del propio menu del celular, no lo hagas por los 3 botones porque cuando lo instales te saldrán errores. The zip file must be 600mb.
YEAH!
i did it!
Thax!!!
hey you have skype?
Yes, I have....
Roldanhollow said:
i did it!
Thax!!!
hey you have skype?
Click to expand...
Click to collapse
but I do not have installed since I prefer using LINE.
Godwarrior1 said:
but I do not have installed since I prefer using LINE.
Click to expand...
Click to collapse
Hello
i see this thread and i think i have the same problem but my p7 is australian version p7-l11
i don't get any updates and i'm still on EMUI 2.3 so i decided to change to global version p7-l10
could you help me please and tell me what i want to do this ?
Thanks
Try it
I'm im l12 variant an change it to l10 with b133 you can try the same. download the update, extract the update.app and put in sd root \dload, then just apply the local update from update menú.
Just to share a few tips for some L12 owners that purchased B119 devices (in my case also arrived unlocked). After try almost all ROMs unsuccessfully (FAIL message while verifying package) I tried a VENDOR CUST (from B133 package) and after a really long formatting phase it end the process (with a FAIL message but at the end). Reboot. After that the only ROM that worked was a B119 of L10 (I used SPAIN one) and it end the process (again with a FAIL message at the end). Reboot. After that I chose B133 (general) and it worked (again with a FAIL message at the end). Now I'm just waiting for B621 download to install. Thanks so much to all the guidance here and official ROMS located below. http://www.htcmania.com/showthread.php?t=876021
Update
Hola como puedo actualizar mi Huawei Advanced P7 L-12? He tratado pero siempre dice no hay,mi Android es 4.4.2 pero no se si es kit Kat o cual,y puedo actualizar a 5.5.1 lolilop? Gracias espero tu ayuda.Era administrator pero ya no es,como se si esta arraigado,rooteado?
Can I change my L-12 with b856 emui 3.1 Android 5.1.1 to L-10 emui 3.1 directly?

Xposed installer for Huawei P8, Lollipop + Emui 3.1

Hi everybody,
I have my rooter Huawei P8 and I now need to find a version that works on Xposed install this smartphone .
I tried several version I found here:
http://forum.xda-developers.com/showthread.php?t=3034811
http://forum.xda-developers.com/xposed/xposed-android-5-1-successfully-t3074586
But each time it does not work ( I get a black screen from the start of my P8)
I recall that I am android 5.0 with overlay emui 3.1 ..
On some version Xposed I had a warning message telling me " this version of Xposed is not yet compatilble with SDK21 arm34 v8a ."
In advance thank you for your help
(Google Translate)
There aren't any that currently work. Our only hope is that a dev comes up with a workaround similar to the Samsung lollipop work around.
ArkAngel06 said:
There aren't any that currently work. Our only hope is that a dev comes up with a workaround similar to the Samsung lollipop work around.
Click to expand...
Click to collapse
Hi,
Ok thanks for your answer.
Please Dev, come on help US
Bye
up
up, rly need a huawei version for honor 6 too
I was using this, and romracer's 20150716 build on Lollipop 5.1 MT7-TL10, both with same issue: navigation bar disappeared
Up
I hope some Xposed devs can share a little love for our P8..
Already tried to install Xposed "Experimental" Lollipop 5.0 on my Device. The result was a brick, but i unbricked it back. It closely "died". Worked all night long to revive my P8 again. ( 4-6 Hours)
Still awaiting for an offical version though. Wouldn't risk it again.
chicos yo he encontrado diversos modos de root para el p8 en enlaces externos y en youtube pero quisiera saber si alguien ha encontrado una version de xposed que funcione para el p8 y tambien queria saber si es que puedo cambiar el diseño de los banners, cambiar el lockscreen al original de android cosas asi con el xposed? : Confuso:: Confuso:: Confuso:
Santi267 said:
chicos yo he encontrado diversos modos de root para el p8 en enlaces externos y en youtube pero quisiera saber si alguien ha encontrado una version de xposed que funcione para el p8 y tambien queria saber si es que puedo cambiar el diseño de los banners, cambiar el lockscreen al original de android cosas asi con el xposed? : Confuso:: Confuso:: Confuso:
Click to expand...
Click to collapse
No hay versión oficial para el P8. Usted tiene desafortunadamente esperar para esta versión. Instalación de otra versión se puede correr el riesgo de su P8 . Lo que tienes que esperar a que el desarrollador crear el versión.
up, rly need a huawei version for honor 7
Up
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Tybreton said:
Up
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
Since TWRP for the P8 is released, we have an interface to install XPosed, maybe try those zips again with TWRP?
I cant try it at this moment.
IkeaKast said:
Since TWRP for the P8 is released, we have an interface to install XPosed, maybe try those zips again with TWRP?
I cant try it at this moment.
Click to expand...
Click to collapse
any news ?
lvpl said:
any news ?
Click to expand...
Click to collapse
Doesnt work :/ Causes bootloop
a little bump
Got bootloop on P7 5.1.1 too
unfortunately it's also a no go on honor 4c 5.1.1
please create xposed for Mate 7 android 5.1.1 as well
Guys why u messing with this exposed app crap..
There is nothing major to make your phone better at all..
Phone has those things already
Not the mention it is not supported and never will be..
It only destroys your phone..
This exposed crap is DEAD anyway..
Fcuk it..

brick erecovery rollback

Hello people
I made rollback with hisuite, the phone turns on in erecovery mode, I give "download the latest version and recover" it throws me an error that says ERROR WHEN GETTING PACKAGE INFO.
the cell phone only turns on in erecovery, how can I do it so I can put a rom for DLOAD?
greetings and thank you very much
-------
hola gente
hice rollback con hisuite, el celular enciende en modo erecovery, le doy a "descargar la útima version y recuperar" me arroja un error que dice ERROR AL OBTENER INFO DEL PAQUETE.
el celular solo enciende en erecovery, como puedo hacerlo para que pueda poner una rom por DLOAD?
saludos y muchas gracias
Hello,
Normal hisuite's rollback process with stock rollback packages fetch ?
From which build to which one ? (It's in hisuite's logs)

Help for unlocking P20 Pro CLT L04 C792 FRP locked

Hello!
My son found a P20 Pro CLT-L04 4 month ago (Canada). The phone is FRP protected. I tried everything but I can't reset the phone. If I understand well, I have to downgrade the firmware. So I downloaded the CLT-L04_default_ca (Charlotte 8.1.0.152), plugged a hardrive on the USB-C to USB adapter. I always ended up after 1 minute to the "Software Install Failed". Seems the phone read well the hard drive as I ear it spinning (it has his own power supply) and scratching, so something happen.
Any idea? Should I try another firmware.
I have on my HD: "dload->CLT-L04_default_ca->update_sd_CLT-L04_default_ca.zip"
There is also a update_sd.zip file in the dload folder.
Multi-Tool told me: CLT-L04 9.1.0.365 (C792E9R1P11).
I cannot believe I will have to throw this phone into the garbage just because of a lock!
If someone could help me, would be really appreciated.
Uhhhh, no android phone has a hard drive.
The Restless Soul said:
Uhhhh, no android phone has a hard drive.
Click to expand...
Click to collapse
I plugged and external hard drive in place of a USB stick as my USB stick is only 2Gb... There is no SD Card slot in this model so you have to use a USB-C to USB cable...
Ayuda
Compré un Huawei p20 pro CLT-L04 de uso pero tiene un problema ,no cuenta con ID,y varias aplicaciones de huawei y observando tiene rom CLT-AL00 que puedo hacer ya le intente con Hisuite para regresar ala versión anterior y solo me sale que ya está actualizado no me da opción de regresar al versión anterior ayuda

Categories

Resources