Help for unlocking P20 Pro CLT L04 C792 FRP locked - Huawei P20 Pro Questions & Answers

Hello!
My son found a P20 Pro CLT-L04 4 month ago (Canada). The phone is FRP protected. I tried everything but I can't reset the phone. If I understand well, I have to downgrade the firmware. So I downloaded the CLT-L04_default_ca (Charlotte 8.1.0.152), plugged a hardrive on the USB-C to USB adapter. I always ended up after 1 minute to the "Software Install Failed". Seems the phone read well the hard drive as I ear it spinning (it has his own power supply) and scratching, so something happen.
Any idea? Should I try another firmware.
I have on my HD: "dload->CLT-L04_default_ca->update_sd_CLT-L04_default_ca.zip"
There is also a update_sd.zip file in the dload folder.
Multi-Tool told me: CLT-L04 9.1.0.365 (C792E9R1P11).
I cannot believe I will have to throw this phone into the garbage just because of a lock!
If someone could help me, would be really appreciated.

Uhhhh, no android phone has a hard drive.

The Restless Soul said:
Uhhhh, no android phone has a hard drive.
Click to expand...
Click to collapse
I plugged and external hard drive in place of a USB stick as my USB stick is only 2Gb... There is no SD Card slot in this model so you have to use a USB-C to USB cable...

Ayuda
Compré un Huawei p20 pro CLT-L04 de uso pero tiene un problema ,no cuenta con ID,y varias aplicaciones de huawei y observando tiene rom CLT-AL00 que puedo hacer ya le intente con Hisuite para regresar ala versión anterior y solo me sale que ya está actualizado no me da opción de regresar al versión anterior ayuda

Related

A question about MTTY

I have been trying to unbrick my 750 treo, apparently my Radio bootloader is corrupted. I have scoured this forum and the internet trying to find a solution.
I've used mtty to try to at least erase or use task 2a, but nothing happens. None of the commands seem to work. I tried the password 0000000000000000
which says its invalid.
I also tried BsaD5SeoA, and it says it passes, but rtask, erase or task 2a and lnb command don't do anything. I have tried mtty 1.11 and 1.42 and neither one will work.
Is there a special microsoft library that I need to install in order to access these commands? I am at a loss why everything I try doesn't work. There has got to be a solution for this. I've tried reflashing the ROM 10 times now, tried mtty, tried the AT&T rescue program.
Is the phone bricked beyond repair?
Any help would be appreciated
I guess it is a major brick, oh well, it'll cost me more to take it in for repair than it would to just buy another used one off eBay.
Keep it around for parts.
The Windows Mobile 6.5 made it a pretty worthwhile phone.
I'll be back...
Have you tried flashing Olipro's Hard-SPL just to see if it will work? I know for a fact his SPL will accept task 2a... task 28... etc. The OEM SPL won't accept those commands and I bet your phone is still stuck on it and that is why they won't work. How do you know that it is your radio that is corrupted and nothing else? You might be able to unbrick it through some trickery.
navenedrob said:
Have you tried flashing Olipro's Hard-SPL just to see if it will work? I know for a fact his SPL will accept task 2a... task 28... etc. The OEM SPL won't accept those commands and I bet your phone is still stuck on it and that is why they won't work. How do you know that it is your radio that is corrupted and nothing else? You might be able to unbrick it through some trickery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=511763
Download the attachment in that post, disregard the files accept for the CHEEIMG.nbh (it is Hard-SPL 1.40). Load the NBH to your SD card and try to flash it. If you can flash it or jump through some loops and get a miracle then there is a chance to fix your phone.
Yeah, I've tried that, it just goes to 7% and then the phone reboots on its own. Also if I try to flash from the SD card it won't recognize anything but an official ROM. When I do a Mtty "checkimage" command, when it verifies the radio, it times out with 0x0 CRC.
With everything I've researched, the only thing that will repair this phone is the right security password for Mtty. So I took another route.
I just purchased a Treo with a broken screen for cheap, so I'm going to swap out the screen and start over. And am going to make sure I have Hard-SPL 1.40 on the phone this time.
Thanks for the help and all of your hard work.
We Treoites appreciate it.
Looking forward to trying the new ROM
Hola por favor necesito ayuda, tengo una treo 750 a la cual le instale una ROM de WM 6.5 q al parecer no era para mi movile, la cosa es q se me quedo con la pantalla en negro, me dijeron q con el programa MTTY.exe podia solucionarlo, pero no se como usarlo, cuando lo habro y selecciono el com 1 se abre como para escribir, pero en esa hoja no dice absolutament nada y no me deja escribir. Por favor se los ruego, ayudenme, me costo mucho conseguir este tipo de celular y ahora me paso esto y sincerament me pone demasiado mal ya q el equipo es caro. Gacias y espero una ayuda
The_hobbyt said:
Hola por favor necesito ayuda, tengo una treo 750 a la cual le instale una ROM de WM 6.5 q al parecer no era para mi movile, la cosa es q se me quedo con la pantalla en negro, me dijeron q con el programa MTTY.exe podia solucionarlo, pero no se como usarlo, cuando lo habro y selecciono el com 1 se abre como para escribir, pero en esa hoja no dice absolutament nada y no me deja escribir. Por favor se los ruego, ayudenme, me costo mucho conseguir este tipo de celular y ahora me paso esto y sincerament me pone demasiado mal ya q el equipo es caro. Gacias y espero una ayuda
Click to expand...
Click to collapse
I' m usando un traductor es esperanza de I que usted puede leer. Usted necesitará destellar con el unlocker del cheeta antes de que usted pueda utilizar mtty. Usted necesita encontrar que el puerto del USB el teléfono esté atado con a la sinc. activa de Microsoft. O el intento al reflash con ROM original 6.0 usando tarjeta del SD dio formato a la grasa 32

Synchronize my documents locally

Greetings.
Here I bring a question and not a complaint. Someone could tell me how I can synchronize Word documents between my PC and my HD7 without the need for a Share Point server. Is that I have over 250 everyday documents saved on my PC which is always kept up to date between my PC and HD2. I stole my HD2 and acquired a HD7. I can not sync as it did with my HD2 since WMDC does not work with HD7, and the Zune does not give this option. Could anyone tell me how I can stay synchronized without using a ****ing server?
Grateful in advance, Joe of PR.
Saludos.
Aquí traigo una pregunta y no una queja. Alguien me podría decir cómo puedo sincronizar documentos de Word entre mi PC y mi HD7 sin la necesidad de un servidor Share Point. Es que tengo sobre 250 documentos de uso diario guardados en mi PC los cuales mantenía siempre actualizados entre mi PC y mi HD2. Me robaron mi HD2 y adquirí un HD7. No puedo sincronizar como lo hacía con mi HD2 ya que WMDC no funciona con HD7, y el Zune no da esta opción. Alguien podría decirme cómo puedo mantenerme sincronizado sin el uso de un maldito servidor?
Agradecido de antemano, Joe de PR.
As far as i am aware at the moment you only have 3 options none of them that great, first is to use share-point, second is to upload to skydrive then download and the third is to email them to yourself.
This is something i to feel is a pain but there should hopefully be a fix soon esp as MS have said that early 2011 they will also start targeting business users.
One question i have though if anyone knows would be if there is a work around with share-point i.e somewhere you can upload documents and it looks to the phone as share-point but is in fact like an on-line share or a cheaper rip off? I just cant see myself or anyone really forking out for share-point just to move some documents to there phone.

Help Rooting my Samsung Galaxy S GT~I9000T!

Hi guys! I can't root my Galaxy S. I've downloaded many ''update.zip'' files, but. in the download mode, when I hit ''apply update''after some weird phrases appear it says ''failed to update''
I think it's because I have the GT-I9000T, and I've found files for the european version.
Any idea? Am I doing something wrong? I'm from.El Salvador,.please someone help me!
Sent from my GT-I9000T using XDA App
hmm. the easiest way for you to do it would be to root using Chainfire's method found in this thread:
http://forum.xda-developers.com/showthread.php?t=788108
READ ALL THE INSTRUCTIONS CAREFULLY.
Isnt z4 root more simple? It is a free app found on the market
Sent from my GT-I9000 using XDA App
z4 root never did worked for me. tried it just once though. speedmod's root via cwm or CF Root are the ones that worked for me without any miss whatsoever.
My situation
Hello guys.
I am from Costa Rica, I do have the same cel phone version you have.
I tried z4root to temporary root my android, then I proceed to install OCLF 2.0 to remove the lag, but after I restarted the android it didn't come back again.
I was able to turn it on but it were stuck after the samsung introduction video.
Just a black screen and no way to do anything.
I tried to press UP, HOME and POWER to get into the recovery mode but it didn't work, so I almost had a brick.
Lookin over the internet I found a small .bat file that I ran with the android connected using the usb cable and I was able to run the factory reset.
Finally I think I got my cel to normal, but I dont know if there are still a few "orphan files" because of the z4root and oclf 2.0.
I am sharing this experience with you just to let know what may happen with our model, I think most of the apps are made for Europe and North America, we may have a small differences on our phones because not everything is compatible.
Bueno, creo que no se puede hacer root a nuestros telefonos por ser de agencia, yo lo tengo con Claro y al parecer no se podra, y vos, que compañía tenés??
Hello, actually I got it in a store, the company in Costa Rica for telephones and communication is called ICE, but they haven't approved the cel phone to work here yet so I did configure it myself.
I think actually my phone comes from UK since all the software was showing UKs config.
Lo compre en una tienda aqui en Costa Rica, pero el telefono aun no esta homologado por el ICE, que es la compania de telecomunicaciones aqui.
Pero el telefono venia de europa creo, ya que todo venia configurado como si fuera del Reino Unido.
Mmm, creo que vos tenes mas chance de poder rootearlo, porque yo lo compré aquí en El Salvador pero el telefono es modelo GT-I900T que es la version para latinoamerica. Y por ahora no quiero flashear ninguna ROM, esperaré a que se acabe la garantía antes de trastear el cel.
Si correcto, de igual manera voy a esperarme 6 meses a que se le acabe la garantia para poder actualizarlo a Froyo 2.2.
Saludos
http://www.taringa.net/posts/celula...Galaxy--GT-I9000T-a-Froyo-2_2_1-via-Kies.html
lee eso te va a encantar
freddy_rv said:
Hello guys.
I am from Costa Rica, I do have the same cel phone version you have.
I tried z4root to temporary root my android, then I proceed to install OCLF 2.0 to remove the lag, but after I restarted the android it didn't come back again.
I was able to turn it on but it were stuck after the samsung introduction video.
Just a black screen and no way to do anything.
I tried to press UP, HOME and POWER to get into the recovery mode but it didn't work, so I almost had a brick.
Lookin over the internet I found a small .bat file that I ran with the android connected using the usb cable and I was able to run the factory reset.
Finally I think I got my cel to normal, but I dont know if there are still a few "orphan files" because of the z4root and oclf 2.0.
I am sharing this experience with you just to let know what may happen with our model, I think most of the apps are made for Europe and North America, we may have a small differences on our phones because not everything is compatible.
Click to expand...
Click to collapse
i have the exact same problem is stuck at "S" screen and i can't enter recovery or download mode ,so were i can find that .bat file u are talking about?

Unlock bootloader Latinamerica (Perú, Chile, Argentina, Colombia, Panamá, etc)

En castellano en el 2do post.
After an arduous search , I managed how to unlock the bootloader my smart phone.
The problem: In Latin America the cellular band we use is 850Mhz/1900Mhz while the rest of the world uses 900Mhz/1800Mhz . If a European rom is installed in our smartphones these will fail because they can not connect to the network.
So it was not possible to unlock our bootloader because none JB version existed for Latin America in the official list of LG and we could not install a version of another region.
Solution: After much searching I read somewhere, I honestly do not remember where, that a mexican said that he had just bought a P880 and this came with JB . Then I began to search for this rom, after a couple of hours I managed to find it at a chinese download page. It was a painful download 50Kb/s (I have a 10mb internet speed) , I tried it and IT WORKED !
Too many words , this is how I did it:
- The original instructions to install it I read it from here: http://forum.xda-developers.com/showthread.php?t=1861942
- I do NOT responsible for any problems or inconvenience you may have with your smartphone by following this procedure.
1. Download from here dz . https://mega.co.nz/#!vN0FUDrK!5yr12FCdFAQGNfs4T5CxtBB1p3DMUQQG6qWV7HtGKn0 ( 571Mb )
2. Download drivers: https://mega.co.nz/#!3ckwVZQQ!wGvu5uKH5lZpalYUSEaIr_4-54N_8q-bfLU-_cEkM3E
3. Download OmapFlashInstaller: https://mega.co.nz/#!SB9QnRAL!FIrimclzdqUpQzXZoQqKkhBDdDEp0DDdmUwHmZO1Xls
4. Download LGFlashTool : http://www.mediafire.com/?pzqr0gsw8u9erxl
5. Install in this order:
a) LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe
b ) LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe
c ) OMAPFlashInstaller.msi
d ) LGFlashTool
6. Turn off the phone and remove the sim card and sd card
7. Press and hold the Volume Down button and connect the USB cable
8. Wait for Windows to install the drivers . Right click on My Computer > Manage > Device Manager , look for LGE CDMA USB SERIAL PORT right click > Properties> Com port and change it to 41
9. Run as administrator LGFlashTool
10. Select the dll that was in LG 880AT V20c folder
11. In S / W select the. Dz
12. Check the USB option and OK
13 . Click on the COM port settings , select 1 ( uncheck all others)
14 . Click start and port 1 should read: READY
15 . Disconnect the USB cable and turn off the computer
16 . Wait 5 seconds
17 . Press the Volume Down button and connect the usb cable to your smartphone
18 . When you start to upgrade you can release the button volume
19 . When the computer restarts finished and ready
Unlock bootloader :
They can test for this post : http://forum.xda-developers.com/showthread.php?t=2224020
To me it was using my BL_unlock.zip Photo
Internet doesnt work? You need to find on internet the right APN configuration and configure your phones.
Any questions comment me .
Greetings and God bless.
Español
Despúes de una ardua busqueda logré liberar el bootloader mi celular inteligente.
El problema: En Latinoamerica se usa la banda celular 850Mhz/1900Mhz mientras que el resto del mundo usa 900Mhz/1800Mhz. Si instalamos una rom europea en nuestros smartphones estos fallaran porque no pueden conectarse.
Por eso no era posible desbloquear nuestros bootloader pues no existia una version JB para latinoamerica y no podiamos instalar una versión de otra región.
Solución: Despues de mucho buscar lei en alguna parte, sinceramente no recuerdo donde, que un Mexicano decia que acababa de comprar un P880 y que este vino con JB. Empecé entonces con la busqueda de esta rom, luego de un par de horas logré encontrarlo en una página de descargas china. Fue una penosa descarga a 50Kb/s pero al fin terminó, lo probé y FUNCIONÓ!!!
Muchas palabras, asi es como lo hice:
- Las instrucciones originales para instalarlo lo leí de aca: http://forum.xda-developers.com/showthread.php?t=1861942
- NO me hagan responsable por los problemas o inconveniente que tengan con su equipo al seguir este procedimiento.
1. Descargar el .dz desde aca: https://mega.co.nz/#!vN0FUDrK!5yr12FCdFAQGNfs4T5CxtBB1p3DMUQQG6qWV7HtGKn0 (571Mb)
2. Descagar los drivers: https://mega.co.nz/#!3ckwVZQQ!wGvu5uKH5lZpalYUSEaIr_4-54N_8q-bfLU-_cEkM3E
3. Descargar OmapFlashInstaller: https://mega.co.nz/#!SB9QnRAL!FIrimclzdqUpQzXZoQqKkhBDdDEp0DDdmUwHmZO1Xls
4. Descagar LG FlashTool: http://www.mediafire.com/?pzqr0gsw8u9erxl
5. Instalar en este orden:
a) LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe
b) LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe
c) OMAPFlashInstaller.msi
d) LGFlashTool
6. Apagar el teléfono y retirar la tarjeta sim y la tarjeta sd
7. Mantener presionado el boton de volumen abajo y conectar el cable USB
8. Esperar que Windows instale los drivers. Dale click derecho a Mi PC > Administrar > Administrador de dispositivos, buscar LGE CDMA USB SERIAL PORT click derecho > Propiedades > Com port y cambiarlo a 41
9. Ejecuta LGFlashTool como administrador
10. Selecciona el dll que estaba dentro de la carpta de la primera descarga
11. En S/W selecciona el archivo .dz
12. Marca la opción USB y OK
13. Click en la configuración de puerto COM y selecciona 1 (desmarca los demas)
14. Click start y el puerto 1 debería decir: READY
15. Desconecta el cable USB y apaga el equipo
16. Espera 5 segundos
17. Presiona el boton de volumen abajo y conecta el cable usb al smartphone
18. Cuando empiece a actualizar puedes soltar el boton de volumen
19. Cuando termine el equipo se reiniciará y listo
Desbloquear bootloader:
Pueden probar las de este post: http://forum.xda-developers.com/showthread.php?t=2224020
A mi me resultó usando el archivo BL_unlock.zip
Cualquier duda me comentan.
Saludos y que Dios los bendiga.
OmapFlashInstaller? I'm sure that's not needed.
Sent from my OmniROM-powered LG Optimus 4X HD
Help please
Hi, when i try to install the LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe, gives me error
Says version 3.08.001 is allready installed and this is an older version. so, in order to install this first i have to unnistall my curent version.
Any idea what should i do?
Monchito007 said:
Hi, when i try to install the LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe, gives me error
Says version 3.08.001 is allready installed and this is an older version. so, in order to install this first i have to unnistall my curent version.
Any idea what should i do?
Click to expand...
Click to collapse
If you already have the proper drivers installed you don't need to reinstall them. Probably they are installed by LG Tool, they should be working.
Sent from my LG-P880 using XDA Premium 4 mobile app
My Optimus 4X is from Claro - Perú, a latin american version, and I just flashed the first leaked V20A when it came out to be able to unlock the bootloader with laufersteppenwolf's procedure.
A friend of mine also told me he manually modified /sys/firmware/fuse/odm_reserved to 40000000c0 and it worked (using info taken from this thread: http://forum.xda-developers.com/showthread.php?t=2251407), but Idk if it is an adequate solution.
mario.gacv said:
My Optimus 4X is from Claro - Perú, a latin american version, and I just flashed the first leaked V20A when it came out to be able to unlock the bootloader with laufersteppenwolf's procedure.
A friend of mine also told me he manually modified /sys/firmware/fuse/odm_reserved to 40000000c0 and it worked (using info taken from this thread: http://forum.xda-developers.com/showthread.php?t=2251407), but Idk if it is an adequate solution.
Click to expand...
Click to collapse
Hi, I'm from Perú too.. and my phone company is Claro. :highfive:
I unlocked my bootloader using the file attached on this post: http://forum.xda-developers.com/showthread.php?t=2224020. BL-unlock_new.rar
After that I install Clockworkmod Touch Recovery and now I have Cyanogenmod 10.1.3
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Hola, soy de Perú también.. y mi compañía también es Claro. :highfive:
Desbloqueé mi bootloader usando el archivo adjunto en este post: http://forum.xda-developers.com/showthread.php?t=2224020. BL-unlock_new.rar
Después de eso instalé Clockworkmod Touch Recovery y ahora tengo Cyanogenmod 10.1.3
good job working that out, should be in the tutorials post

compre un huawei ascend p7 L10 en marzo y no arranca

Mod Edit : Use only English language on XDA. If you have trouble in doing so kindly use google translator.
OP is edited to english
Good afternoon;
Buy a Huawei Ascend P7 L10 in March this year, he ran the application of recovery I went out and will not start, it reboots and will not start, it stays in the image of Huawei and off and is turned on only but remains in the image I've tried to install him several versions Update.app via adb and nothing to start.
What can I do.
Cheers,
omarnavea said:
Buenas Tardes;
Compre un huawei ascend p7 L10 en marzo de este año, le corri la aplicacion de recovery se apago y no prende, se reinica y no arranca, se queda en la imagen de huawei y se apaga y se prende solo pero se queda en la imagen, he probado en instalarle varias versiones update.app via adb y nada que arranca.
Que puedo hacer.
Saludos,
Click to expand...
Click to collapse
Write it in English.
Good afternoon;
Buy a Huawei Ascend P7 L10 in March this year, he ran the application of recovery I went out and will not start, it reboots and will not start, it stays in the image of Huawei and off and is turned on only but remains in the image I've tried to install him several versions Update.app via adb and nothing to start.
What can I do.
Cheers,
The apdate.app does not install vía adb... Tray this... Put an update.app on this path... Sd/dload... Shutdown and get On while hold the volumen +- at the same time... Will install ROM... Just wait till finish... Remember use preferly the versión that your phone come with...

Categories

Resources