Database Develop

My xperia doesn't take the charge!

Hey, dunno if some one had the same problem but my xperia doesn't take the charge.
Its appened when the mobile has terminated all his battery, and know the charge is not accepted by the phone
help me please

Something perhaps similar happened to me, i ran my battery completely flat and then could not switch the phone on even when it was on the charger. So I left it on the charger for ~1 hour and then it switched on fine! The other possibility is that you battery is dead. Hope this helps!

Its not the first time its appened to me, and the first time i had the problem i try a lot of time to recharge it, take out the battery, replace it etc.. and its worked.
But in 2 days, my phone is off :/
My battery is not dead i know, but how to recharge it

I have 2 computers from which I load it with usb cable. For some reason Mac Pro doesn't load the damn phone but Macbook does.
Try switching your "power" source. And sometimes when the battery goes really flat it needs many hours to even boot when loading up. One time I really thought the damn thing was dead for sure... But it came back to life
When you press the power button there's a red light next to volume buttons indicating it doesn't have enough power yet to boot up. If there's no red light then it's not charging at all.

thD64 said:
Hey, dunno if some one had the same problem but my xperia doesn't take the charge.
Its appened when the mobile has terminated all his battery, and know the charge is not accepted by the phone
help me please
Click to expand...
Click to collapse
Just leave if plugged-in and it will charge. It takes some time before it will charge if it is fully drained.

Ok thanks for reply
Have no real solution, but have the red light near to the volume button, or in the top of the phone.
But the phone doesn't take the charge at all...
The red light gave the battery charge, only that... have it sometimes and sometimes havent it...
Help me please
2 day less my phone know..

Ok i dunno why but the phone weak UP !
NICE
Ir was connected to the cpu and i presszs the button and it weak up
omg this phone

(Sort of) got it.
I'm not really an xda developer but id do have an xperia.
The same problem occured to my device about three weeks ago. I've noticed that the phone would still charge in the computer, but not by the power net adapter. (it must be broke i guess)
Today i've locked myself out calling the battery flat. I couldnt get it on anymore. After a lot of hassle this was the solution for me:
1) Connect the phone to a computer. Don't try to turn it on! Leave it there for about 15 minutes.
2) Disconnect the phone and pull out the battery.
3) Hold down the "on" button while inserting the battery back.
-- It should turn on now
4) Release the on button and quickly connect it to your computer again.
Hope this helps.

I just remember the red led lit on at the on/off button and the red light disappeared after 5 mins or so and i left for breakfast while it was still in the charger and by the time im back from breakfast, it turned itself on and was charging up

[FIX] Revive phone from the drain of death

this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.

Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?

Celestial Fury said:
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Click to expand...
Click to collapse
no you can't speed up charging. Charging speed is limited to cable quality, AC plug quality and software/hardware restrictions.
the USB on PC and magnetic cable combo for some reason helps to start the phone like you do when you want to recharge an depleted car battery.
It just open the circuit and let the phone charge again.

someone please confirm if this works for more than one person/situation.
Thanks for assistance btw, hopefully it works for all of us.

Nope doesn't work.
I tried it already.
Sorry guys.

Worked for me. Took some time before PCC registered it though.

help me please
Asadroid said:
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Click to expand...
Click to collapse
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you

pheel said:
Nope doesn't work.
I tried it already.
Sorry guys.
Click to expand...
Click to collapse
did the computer detected the phone but for a brief moment like trying to install the drivers?
Kirkymole said:
Worked for me. Took some time before PCC registered it though.
Click to expand...
Click to collapse
@Kirkymole;
can you share what you did exactly and what i can up to the guide?
and im glad that i could help you
momo-infos said:
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
Click to expand...
Click to collapse
as i told you on the PM write up how you bricked it exactly and what steps have you done so i can help you correctly.
i will post pictures of the procedure of how i did it when i get a few hours to edit and upload it.

Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.

Video instruksion would be very helpfull maybe

Asadroid said:
did the computer detected the phone but for a brief moment like trying to install the drivers?
Click to expand...
Click to collapse
Yes. But the computer simply recognised it as a normal "unknown" usb device with usb debugging disabled.
--
ruinkhan said:
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Click to expand...
Click to collapse
Exact same thing happened to me. "USB debugging off"

All I did was plug in the magnetic connector, then with the PC turned on and Pc companion running I plugged in the USB, it took about 20 minutes to recognise it but once it did, I unplugged it, left it on charge via the magnetic plug for around 5 hours and although the charging symbol never appeared it booted into recovery the normal way (I did that just to see what would happen) then restarted the phone via Cwm and it worked normally from then on.

Kirkymole said:
although the charging symbol never appeared it booted into recovery the normal way .
Click to expand...
Click to collapse
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?

ruinkhan said:
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
Click to expand...
Click to collapse
The symbol that appears on the screen.

I also kind of used this method.
I directly plugged in, in these steps.
1) Plug in magnetic charging dock with 1A charger (Plugged USB into charger)
2) Plug in USB with 2.1A charger (Plugged USB into charger)
Dim-ish red light popped up and the phone began booting.
Plugging into the phone for me wasn't as effective as plugging into the charger as I left it for a while and nothing happened but upon plugging USB into my single dual port charger this method worked to get my phone onto the charging screen, Android L
Had to plug the USB in and out a few times, not too many times, but eventually it booted up to the charging screen.
Be patient is the key I suppose?

For me worked with magnetic and usb 1A charger! Thanks!

[Q] RED LED Light, Phone won't start up

Hi guys,
I am having some problems. Last light, my phone ran out. I charged it, and when I woke up this morning, it won't start up. Every time I plug it into the charger, it gives a RED LED light at the top. Every time I pull it out of the charger, the RED LED disappears. It is running a pre-rooted version of Android KitKat 4.4, so I guess that means it has lost warranty...
I have not tried plugging it into a PC yet.
Please help, thanks.

Sounds like it's bricked. Can you get into flashmode when plugged into pc?

Lambo_car16 said:
Hi guys,
I am having some problems. Last light, my phone ran out. I charged it, and when I woke up this morning, it won't start up. Every time I plug it into the charger, it gives a RED LED light at the top. Every time I pull it out of the charger, the RED LED disappears. It is running a pre-rooted version of Android KitKat 4.4, so I guess that means it has lost warranty...
I have not tried plugging it into a PC yet.
Please help, thanks.
Click to expand...
Click to collapse
you have unlock bootloader? if yes.. then download flashtool then boot in flashmode and flash any FTF for z1 ..

Ahki767 said:
Sounds like it's bricked. Can you get into flashmode when plugged into pc?
Click to expand...
Click to collapse
No, it couldn't be recognized by any programs (SONY PC COMPANION, Flashtool etc)
Very weird: a minute ago, it was charging, wouldn't boot up, still red led like before etc... And I didn't realize my laptop was on low battery and ran out, and my phone stopped charging. And the phone started up automatically after that? It had 3% battery, so it was not charging.

The battery keeps going from 3 percent to 4 and back.

Lambo_car16 said:
No, it couldn't be recognized by any programs (SONY PC COMPANION, Flashtool etc)
Very weird: a minute ago, it was charging, wouldn't boot up, still red led like before etc... And I didn't realize my laptop was on low battery and ran out, and my phone stopped charging. And the phone started up automatically after that? It had 3% battery, so it was not charging.
Click to expand...
Click to collapse
The phone will not be recognized when off, when off keep pushing volume up and connect via USB to PC, it will be recognized in Flashmode and flash a new FTF 4.4 from Flashtool.
If it turned on then leave the phone under charge (Wall Charger) for at last 4 hours and check again, if it still give you problems then I will recommend to do a Factory Reset or flash a new KK and wipe everything, Data, Appslog and Cache.

Phone suddenly died/ hard bricked.

The phone (C5303 - Stock ROM - Locked BL - No Root) was working normally. The last time I checked, it had 60% battery.
The phone suddenly stopped working.
I tried to turn on the phone. Nothing Happened.
I tried to hard reset. Nothing Happened.
I even tried to charge the phone... Even the red illumination light was not working!! Hence, nothing happened at all.
I couldn't find a solution to this...Please help!! :crying: :crying:

karan11000 said:
The phone (C5303 - Stock ROM - Locked BL - No Root) was working normally. The last time I checked, it had 60% battery.
The phone suddenly stopped working.
I tried to turn on the phone. Nothing Happened.
I tried to hard reset. Nothing Happened.
I even tried to charge the phone... Even the red illumination light was not working!! Hence, nothing happened at all.
I couldn't find a solution to this...Please help!! :crying: :crying:
Click to expand...
Click to collapse
I would suggest for you to first, hold the off button under the battery cover for about 20 seconds. This might stimulate "battery removal" on the SP. Afterwards, try plugging in the wall charger and see if the device react.

TechnoSparks said:
I would suggest for you to first, hold the off button under the battery cover for about 20 seconds. This might stimulate "battery removal" on the SP. Afterwards, try plugging in the wall charger and see if the device react.
Click to expand...
Click to collapse
I tried doing that.
Still nothing happened!!
:crying:

Let it charge using a wall socket for atleast 12 hours!

Gamm86 said:
Let it charge using a wall socket for atleast 12 hours!
Click to expand...
Click to collapse
Did that. Still no change.
No red LED light, no vibration, even the screen is not on.

If pressing the yellow button on the back for 10 seconds doesn't work after charging it for 12 hours, you either have a faulty charger or a dead phone. (hardware failure)
Last chance would be to use a different charger. If that doesn't work, you will have to return your phone and file a warranty claim if you have NOT unlocked your bootloader nor rooted it.
Should you have rooted or unlocked your phone then I can only suggest visiting this link: http://tinyurl.com/n35lsjn

Gamm86 said:
If pressing the yellow button on the back for 10 seconds doesn't work after charging it for 12 hours, you either have a faulty charger or a dead phone. (hardware failure)
Last chance would be to use a different charger. If that doesn't work, you will have to return your phone and file a warranty claim if you have NOT unlocked your bootloader nor rooted it.
Should you have rooted or unlocked your phone then I can only suggest visiting this link: http://tinyurl.com/n35lsjn
Click to expand...
Click to collapse
Well, it's definitely not rooted or unlocked. And it's warranty has been expired (more than 1 year old).
I guess I'll go the Sony service center or else, the championship!!
Thanks for the support anyways!! :good:

Hi,
Couple of days ago same happened to me.
I just took phone to hand and realized that its completely dead. Just like this, without a reason. No vibrations, led blinks, no reaction for any button combinations, plug-in charger and so on.
After a long time of fighting, reading forums, youtube clips etc. something started to change and prevented me to buy another phone.
First symptom was that in time where power button is pressed the red light had blinked two times shortly and then again and again. When button had been released again nothing.
Then I've been trying to connect phone to PC in flashmode. It has failed but I've observed that right after usb connector is plugged, windows knows that something has been connected ( "USB device connected" sound) but 2 -3 seconds later
disconnected ("USB device disconnected sound"). In this moment PC companion even was able to complete step "connect the device" but right after that it returned error (disconnect device, connect again and try again).
Then I connected phone to wall charger again. Now, when I do this, in first moment i see short blink of red light and immediately after this it starts to shine constantly for a couple of minutes. After that red light goes out for another couple of minutes and whole sequence repeats again and again in loop (short red light -> long red light-> no light).
I've red somewhere that constant red light means that phone battery has not enough power even to run charging mode via kernel (not enough power to run kernel). The suggestion is to be patient and charge the phone via wall charger for 15 or 20 hours, what currently happens. I'm still waiting for miracle. I could buy new battery but I wouldn't like to do this for nothing.
If you have any suggestions or advices/confirmation what the red light sequence means please feel free to comment @karan please share with us the result of service intervention and root cause of issue if possible. Thx in advance.
ps. additionally I've discovered that usb cable which I used is broken. different phone connected via this cable to pc is not recognized (nothing happens) but under another cable it does normally. It might be the reason of problems but I have no Idea if it could result the battery dead.

Hi,
Anyone knows if phone should work without battery? I've seen such information on polish android forum however when I unplugged the battery and plugged charger nothing happened. Only one short red blink and then nothing. If phone should work in such state it means that my problem is not related to battery.

[Q] Strange (hard?) brick

Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?

Qba_S said:
Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?
Click to expand...
Click to collapse
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!

tilakpatel22 said:
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!
Click to expand...
Click to collapse
Thanks for the info! I've ordered a replacement battery already.
I'll open my phone today and measure all voltages. I'll keep you updated.

Good luck

tilakpatel22 said:
Good luck
Click to expand...
Click to collapse
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...

Qba_S said:
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...
Click to expand...
Click to collapse
no problem