Model: G900A
Version: 4.4.4
Baseband: G900AUCU2AOA2
I'm trying to root my G900A via the instructions from muniz_ri thread. While flashing with Odin3 V3.10 I load G900A_ND3_Stock_Kernel into the AP and press start but freezes on boot.img forcing me to unplug and power off. Is it because its ND3 and not NG3. I found it weird that his kernels were in the S4 files and not the S5 files. Any ideas?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900A_ND3_Stock_Kernel.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
Related
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Sliderse said:
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Click to expand...
Click to collapse
Have you tried flashing stock rom of the Chinese version of the Note GT-19220?
Since you have the chine i9220 then make sure you get the specific roms for the chinese version. If you try flashing the N7000 roms you may get this error or may brick it so just be careful.
Sliderse said:
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Click to expand...
Click to collapse
You flashed N7000XXLQ3_N7000XXLPT_N7000NEELP4
It was N7000's rom and i feel its not compatible for i9220
You can flashed lidroid rom, both i9220 and n7000 can be flashed, I tried it and it works
Sent from my GT-N7000 using xda premium
Hi,
I need help to install the stock ROM for my S4 Active I9592.
When I try to flash it with ODIN (v3.07) it tells me: FAIL!(AUTH)
I have searched for an answer but have'nt found any.
Does anyone know what I can do?
PS: I currently have Darkmans custom rom installed.
Thanks,
Frozzt
Flash the CSC and cp files only
Sent from my SGH-I537 rooted, running GPE 4.4.4 ROM
Thanks,
I'll try it!
I can't seem to fin the files...stupid me.-.
The name of the file I'm trying to flash is named: I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5
Since I'm a new member I can't post links yet..
Thanks,
Frozzt
Perhaps you can find the firmware here
This is the message I get when trying to flash this file: I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5
And it is the file for my country.
Message from ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I've come across various other threads concerning this topic with other devices, but none are exactly like my issue.
I rooted originally with Odin and CF autoroot with no issues. Now me being the noob that I am, I un-rooted with Kies to check for any updates. The process went fine, however my device status still says "custom" and I'm unable to re-root using the same method that I did before. I get a "fail" in Odin after the cache.img process and have to remove the battery to reboot device.
Has anyone had this issue or am I the only idiot to unroot this beast of a phone?
Best bet. Odin back to stock and then reroot and forget about updates.
BAD ASS NOTE 4 + BAD ASS GEAR S
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
I'd try a different version of Odin.
Razorfengraul said:
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
Click to expand...
Click to collapse
As said diff version or bad cf autoroot download. It can be many things. Try a fresh download of everything. Also when u Odin back to stock it went fine so it is something after. Bad download
BAD ASS NOTE 4 + BAD ASS GEAR S
Hello.
Recently my phone got stuck so i decided to reboot it, after reboot theres just a logo screen.
Recovery mode doesnt work.
Charging works (but after yesterday's manipulations charging logo is turning on but seem to be stuck either (though i guess its working just not animated anymore)).
Download mode works.
My OS was Cyanogen (i dont remember version).
I am kinda newbie but i ve read some stuff on the intenet and tried to solve the problem with Odin. I used N7000XXLSZ_N7000OXELS7_N7000XXLSO_FACTORY_SER with Odin versions: 1.83, 1.85 and 1.87 with
boxes checked PDA, PHONE, CSS.
1. Odin 1.85 is getting stuck on "NAND Write Start".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
2. Odin 1.83 is getting stuck on "zImage".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
3. Odin 1.87 is getting stuck on "NAND Write Start".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
I ve tried about 5+ times with each version.
You are my last hope fellas
Try just flashing an Odin version of philZ kernel. Also try another laptop with freshly installed samsung USB drivers.
Flash PhilZ kernel from Odin 3.07. After this, you'll have working PhilZ Touch Recovery
Try flashing philz cwm as they said or try flashing a stock ROM from sammobile.com .. And only use PDA and untick auto reboot ..
I have a note 5 SM-N920C and it's rooted, I'm trying to flash the stock firmware but it won't work for some reason.
For odin version 3.09 I get this, I left it on for a hour but still the same thing.
I used N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 for flashing
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Had the same issue while flashing auto-root via odin.
It just stays stuck at NAND write part.
Familiaaa said:
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Click to expand...
Click to collapse
The problem is that I can't install the stock firmware, it doesn't complete the installation for some reason. Also when I am in TWRP, it said that there isn't a OS installed and I have seen that I have to install stock firmware.
I did try odin 3.12.3 and it failed, then I tried odin 3.10.6, it failed but now it also stops at a certain point and won't complete the installation. I could try odin 3.11.1, thanks for response.
I just tried Odin 3.11.1, failed
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that I tried odin 3.10 and 3.10.5, stuck again but at setupconnection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I think the problem is my stock firmware, I can't seem to find the stock for a SM-N920CZDAXSG. Help plz
It was the stock firmware, wrong version, I cry today.