Related
Hey all,
I've got a problem related to my Micro USB port (at least I think it is).
[Long story]
I've got a very annoying issue right now. Today I flashed Team ICSSGS RC4.1. Later when I connected my Galaxy S to my PC with the usb cable, no recharging icon appeared and my pc did not react to the connection at all.
Thinking it was a bug in RC4.1 (as OneCosmic RC 2.3 had the mass storage issue) I searched the ICSSGS thread, but not a single issue about mass storage mode was posted. So I flashed Devil kernel, hoping to fix it, but it didn't. Reflashed RC4.1, but problem still persisted.
I went radical and recovered a nandroid backup in CWM of ICSSGS RC3.0 (the one is was running earlier today), but somehow the recovery failed and left me with a semi-bricked phone. (Actually the 2nd time in a row when recovery semi-bricked my phone.)
Only download mode works. Recovery and normal boot bootloop.
[/Long story]
In short:
When connecting to PC to flash with Odin:
-At first the PC did not even notice the phone being connected through USB. Nothing happens.
-After blowing in the contacts of the Micro USB port, PC recognizes connection, but gives "Unknown device" error upon connecting. Reinstalling Samsung drivers does not work at all. Tested on laptop and home PC.
-Somehow I always have to blow into the Micro USB port to create contact and to get the PC to recognize a connection. But that's about it. "Unknown device" every time.
-When I plug in wall charger, the big battery icon appears, but stays grey all the time and after half a minute the phone boots, starting the bootloop.
Could it be that my Micro USB port is broken?
Any solution for this?
Thanks in advance!
I feel so stupid for recovering that nandroid backup. Otherwise my phone would still be working...
you will need the nexus drivers for your comp found here : w w w.multiupload.co.uk/BUCFT8M42 as your samsung drivers are no use now.
Thanks for your advice: Going to test it right away.
Unfortunately your link does not work for me.
I had the same problem but replacing the cable solved it.
Sorry for the duff link http://www.multiupload.co.uk/BUCFT8M42N
japperrrr said:
I had the same problem but replacing the cable solved it.
Click to expand...
Click to collapse
Tested this morning with someone else's cable, still the same issue.
Tried the Nexus driver, but still nothing. Also having troubles again to let the usb connection register. It connected after cleaning it, but now it does not seem to connect at all.
Could it be that the phone is completely busted and therefor breaks usb connection?
Haven't heard such a story yet, but is it possible?
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Same Issue cant fix
Hey guys im glad to see others are having the same issue but i cant seem to fix mine.
Assume im an idiot and ive missed something out but ill explain my situation....
Galaxy i9000 - windows 7 32bit - put ics on it a few weeks back following a guide on youtube (had never used odin or anything like that before) got it working but now have no usb comm options in the ics settings. now when i plug the usb (when it does detect at all) it says driver havent worked - device manager shows unknown device - i try update the driver and it says the best driver is already installed.
Im completely stuck and want to revert back to gingerbread so i can use my usb functions again. If i can get odin to see my phone again ill be relieved.
Any ideas?
Cheers guys! Seán.
subcultural said:
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Click to expand...
Click to collapse
dieselno7 said:
Any ideas?
Cheers guys! Seán.
Click to expand...
Click to collapse
USB solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
But most of all, check your usb cable and try switching to another USB port after rebooting your PC
Hey guys, I have a big(or not?) problem.
My phone doesn't recognize my SD Card and when I connect my phone to PC via USB Cable, I don't get a notification "USB Connected". But I noticed that this isn't about USB Cable or PC, it's just about the SD Card. So we are going on this.
Also I can't get to flash mode by pressing back and plugging USB Cable, it just charges the phone. So that mean I can't use SEUS or similar ****?
I searched this on google and tried something like Automount SD app, factory reset, formatting SD Card to FAT or FAT32 but these didn't work.
I thought it was a easy problem but now I'm a bit afraid. What can I do now? Did I really messed up with that?
Edit: Guys, miraculously, I've solved the problem. I was trying something, I reinstalled PC Companion, SEUS and Gordon's Gate. Tried again but it was the same, no notification. And within a last hope, I tried to use SEUS, so I turned off the phone and started SEUS, miraculously I get to flash mode. Now it's working fine, thank you all for your help. I don't know how did it happen, I couldn't get to flash mode yesterday but now I can. Thanks again.
UP
Any Ideas? I can't listen music, use camera and much more... It really bothers me now.
i like heavy metal said:
Hey guys, I have a big(or not?) problem.
My phone doesn't recognize my SD Card and when I connect my phone to PC via USB Cable, I don't get a notification "USB Connected".
Also I can't get to flash mode by pressing back and plugging USB Cable, it just charges the phone. So that mean I can't use SEUS or similar ****?
I searched this on google and tried something like Automount SD app, factory reset, formatting SD Card to FAT or FAT32 but these didn't work.
I thought it was a easy problem but now I'm a bit afraid. What can I do now? Did I really messed up with that?
Click to expand...
Click to collapse
have you tried putting SD card in other device or adapter in computer?
hmm you cant enter flash mode? that is biggg problem i think :/
i like heavy metal said:
Hey guys, I have a big(or not?) problem.
My phone doesn't recognize my SD Card and when I connect my phone to PC via USB Cable, I don't get a notification "USB Connected".
Also I can't get to flash mode by pressing back and plugging USB Cable, it just charges the phone. So that mean I can't use SEUS or similar ****?
I searched this on google and tried something like Automount SD app, factory reset, formatting SD Card to FAT or FAT32 but these didn't work.
I thought it was a easy problem but now I'm a bit afraid. What can I do now? Did I really messed up with that?
Click to expand...
Click to collapse
When you plug in your USB cable, can your PC detect your phone? sometime could be your USB port problem. Try on other PC/laptop, and see the result. If you PC couldn't detect your phone/USB cable, it wouldn't install the correct drivers, so PCC is unless in this case, You have to install Golden Gate driver instead.
Other the other hand, to enter into flash mode, you need to fully power down the phone first ( you didn't describe this step in your post). Then only hold the "back" button and plug-in the USB cable.
@Xmaster8
Yeah, I've tried it on mum's phone and worked.
@saintckk
No, my pc detects the phone, but not at all. I mean that I can charge the phone but I can't transfer files to my SD card. And there is no notification on my phone "USB Connected.".
And my sist just used the PC to put some music on her SD Card, so there is no problem with the cable or computer. There must be something else.
And I didn't get what you mean with "fully power down". If you mean turning off phone, I did this. But if you mean spending all the battery, I didn't do this.
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.
ssyed said:
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.
Click to expand...
Click to collapse
Try another USB cable.
tknguyencsu said:
Try another USB cable.
Click to expand...
Click to collapse
As I have mentioned in my post that I've already tried multiple different cables, including the original.
Could be factory defect. flash original rom and take it to service center.
dsmas said:
Could be factory defect. flash original rom and take it to service center.
Click to expand...
Click to collapse
Phone used to work perfectly fine before. Already flashed original rom, it did nothing. And I've already talked to Samsung. They won't help me.
I've already mentioned that in my op! I would be nice to hear suggestions/solutions other than the ones I've mentioned.
Can anyone please help me out with this? I even tried cleaning the usb port a bit more, but no avail. I am guessing the file that recognizes a PC connection got corrupted some how. Anyone know how to update or replace that?
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
[THINGS I'VE TRIED THAT DID NOT FIX THE ISSUE]
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue. Also tried Stock ICS via Mobile Odin
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM manually (without pc)
6. Tried various different roms in the development section
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
8. Replaced the micro USB hardware component inside the phone (bought it from ebay)
9. Tried a Jig to see if it recognizes that and it booted me into download mode but doesn't recognize the USB connection to PC.
I've been struggling with this issue for the past 2 months and have gotten sick of this issue.:crying: I've tried all that was possible based on my knowledge and now I need some serious help. I've posted this issue in the Q&A before and about 3 people responded with suggestions that I had already mentioned in thread. I believe this issue might be caused by a file that has gotten corrupted on the phone because i've even replaced the hardware (usb port) and it didn't change anything. If anyone can offer any help/suggestions that would be great. Sorry for making this such a long post but I really need some help and wanted to give as much info as possible.
Thanks in advance.
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
kopitalk said:
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
Click to expand...
Click to collapse
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
ssyed said:
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
Click to expand...
Click to collapse
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I am well versed in replacing hardware components myself. The usb module I bought from ebay does exactly the same thing as the original one. It too charges but does not recognize PC connectivity which means it wasnt the usb module which was defective, its something else!
I would love to send it in for repair, but Samsung WON'T service my phone because I live in Canada and they do not sell the international Note here. When I called them they told me to take it to where I bought it from (which was in UAE). Since I am not going there and have no plans to go there, I am stuck with a phone that can't be warrantied!
Any one know how to fix this issue?
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
kopitalk said:
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
Click to expand...
Click to collapse
I've tried multiple different cables, including the original, in multiple different usb ports! nothing works.
I appreciate the suggestions tho
Try another set of driver from Samsung.
The set in the file from link below works perfectly for me:
http://www.mediafire.com/?ager59qlwy35q50
If it does not work then, maybe, try to change rom. Load a custom rom.zip to external sdcard and flash using CWM.
cheers.
I had the somewhat similar problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
darthvedor said:
I had the same problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
Click to expand...
Click to collapse
Hmm it looks like your issue was different.. at least you were getting some sort of message that you connected your phone. When I connect it to the computer, its as if nothing happened. I've even tried linux and its just that the phone isnt recognizing its connected to a computer, it thinks its connected to a charger.
I tried your suggested solution, still no avail!
ssyed said:
it thinks its connected to a charger.
Click to expand...
Click to collapse
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
darthvedor said:
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
Click to expand...
Click to collapse
Just tried that... didnt work
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
abhijit038 said:
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
Click to expand...
Click to collapse
I bought a whole new micro usb module and replaced it. Still didnt change anything.
lol our weatherman is messed up, and where I live, its just been hot and dry for the most part.
i had the same problem before...try changing the rom ...that worked for me
ssyed said:
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
Click to expand...
Click to collapse
Almost same situation here from the highlighted above. when I plug my charger in the usb it just charge the phone and PC cannot detect it. Also, it only charge the phone when i reboot it. If I unplug the charger while the phone is on, and plug the charger back, it will not charge. However, when I insert the usb cable in my phone, there is a notification in my phone which says "usb connector connected" but the PC cannot detect my phone for mass storage, as well as for Kies and Odin.
My usb port was already replaced by Samsung but same problem still occurs. It could be a software/configuration related issue. Or could it be a usb brick? Pls help.
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
I have the same problem ... :crying:
nokiamodeln91 said:
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
Click to expand...
Click to collapse
Yes, tried on download mode but odin cannot detect it.
Joined the group of USB Brick ....
I was trying to upgrade from A9 to A10 and phone booted into bootloader. probably because i didn't clear internal memory. but it didn't even let me boot back into twrp recovery, which i upgraded to be compatible with android 10.
i have done all that before and never had problems that my pc didn't recognise the phone. tried on linux, not just windows - same story. tried on different windows machine - again the same. doesn't even show it as unrecognised device under device manager. tried cleaning usb ports, still no difference. even cahnged the battery as i've read somewhere that low battery can cause phone not being recognised.
now i don't know what else to try. could be loose data pins at side usb c port that would cause this?
any help is appreciated
edit: i disassembled the phone and checked all the pins from side port. now i can't say for sure, but it seems like few pins are be shorted to ground. i'm not sure if i accidentally poked with multimeter shielding instead of pin, but i tested few times on continuity and last three pins all beeped on ground. can't really see inside the port that good, but it looks all untouched. could it be that damage is already done when they shorted for the first time or is there any hope?
Did you use side usb when trying to access fastboot? Also in my opinion its a simple matter of switching active slot, like from A to B or viceversa. Also, did you update with an ota file, thru TWRP or how?
VarDes said:
Did you use side usb when trying to access fastboot? Also in my opinion its a simple matter of switching active slot, like from A to B or viceversa. Also, did you update with an ota file, thru TWRP or how?
Click to expand...
Click to collapse
ofcourse i used side port. how to switch active slot if i can't access recovery nor connect phone to the pc to boot up twrp?
i updated through twrp with full android 10 zip downloaded from asus