Related
Just bought a Note 2, currently I have a Galaxy S3 with the official extended battery. This gives a small increase in capacity (3000mAh) and also a small amount of thickness added on compared to standard.
Most of the extended batteries for the Note 2 are huge, I am curious to know if anyone has experienced any trusted extended batteries, possibly an extra 1000mAh+, but only adding a small thickness to the phone like the official one for S3, instead of the large batteries like Zerolemon etc.
I've been looking for something like that too. Haven't found one yet. I don't like the bulk that the big extended batteries add to the already huge device.
they are all double the size of the normal battery nothing thinner.
Sent from my SCH-I605 using xda premium 2 beta
I dont see the point of buying a thin extended battery. If you want more battery life then get MORE battery life.
Sent from my SGH-T889 using xda app-developers app
EyLaTnOgN said:
I dont see the point of buying a thin extended battery. If you want more battery life then get MORE battery life.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Well I don't need a battery that lasts for 4 days or whatever, just slightly longer than stock. And I do not wish to increase the thickness of the phone 2x, 3x etc for extra power that I don't need.
The genuine extended for the S3 was the perfect solution, I just wish similar existed for the Note 2.
Rfcg said:
Well I don't need a battery that lasts for 4 days or whatever, just slightly longer than stock. And I do not wish to increase the thickness of the phone 2x, 3x etc for extra power that I don't need.
The genuine extended for the S3 was the perfect solution, I just wish similar existed for the Note 2.
Click to expand...
Click to collapse
Hi,
while digging DealExtreme, I found this, I'm wondering if anyone tried it already
Found no review or video on the net about it
Link : http://dx.com/p/keva-cbw-n7100-2400...attery-for-samsung-galaxy-note-2-black-225717
dawabz94 said:
Hi,
while digging DealExtreme, I found this, I'm wondering if anyone tried it already
Found no review or video on the net about it
Link : http://dx.com/p/keva-cbw-n7100-2400...attery-for-samsung-galaxy-note-2-black-225717
Click to expand...
Click to collapse
I have had this same range for my HTC One X. When the battery feeds the device, it constantly told me that the power used is larger than it receives from the battery. So, this is bad!
When the device is off and the battery is full, it is possible to charge the internal device to approximately half full, so this is bad!
ut, worse is to come: My device dropped by accident and, because of this heavy load together with missing protection for the glass (device does NOT protect the face of the device!) the gorilla glass broke to several pieces.
So, unless this is a completely different type (which I doubt!), you better NOT try this one!
Bright.Light said:
I have had this same range for my HTC One X. When the battery feeds the device, it constantly told me that the power used is larger than it receives from the battery. So, this is bad!
When the device is off and the battery is full, it is possible to charge the internal device to approximately half full, so this is bad!
ut, worse is to come: My device dropped by accident and, because of this heavy load together with missing protection for the glass (device does NOT protect the face of the device!) the gorilla glass broke to several pieces.
So, unless this is a completely different type (which I doubt!), you better NOT try this one!
Click to expand...
Click to collapse
Oups ! Thank you very much , too bad, I ordered one already (I liked the idea)
20$ wasted but at least I know I should not use it - or if I do, use maximum caution
Thanks a lot for letting me know, I'll report back is I go crazy enough to try it
What puzzles me is how you supposed to connect it. The case has a built in battery with two pins sticking out in the back. Then you have 2 sets of conductive wires to run from the battery to the phone? Where do you connect it on the phone, wireless charging pins or something? If you have Verizon phone, those not even available on the back, etc.
vectron said:
What puzzles me is how you supposed to connect it. The case has a built in battery with two pins sticking out in the back. Then you have 2 sets of conductive wires to run from the battery to the phone? Where do you connect it on the phone, wireless charging pins or something? If you have Verizon phone, those not even available on the back, etc.
Click to expand...
Click to collapse
I guess it'll take a long time but when I receive it , I'll try to post some pix here
vectron said:
What puzzles me is how you supposed to connect it. The case has a built in battery with two pins sticking out in the back. Then you have 2 sets of conductive wires to run from the battery to the phone? Where do you connect it on the phone, wireless charging pins or something? If you have Verizon phone, those not even available on the back, etc.
Click to expand...
Click to collapse
It looks like something you have to put inside, between battery and connectors.
The end will stick out of the phone. I think it has some glue so it will stick somehow on the case.
After that's connected, you can put the phone onto the external battery and the metal tips of the external battery will fit 'nicely' the glued metal stuff.
My One X already had those connectors for connecting to car etc.
I sure would not like this adaptation of my phone...
Hi!
First, I'm sorry for English, I'm not professional.
A few days ago I made a working wireless charger for Motorola Droid 4.
What are the benefits?
People says, the original inductive charging cover is not compatible with most of cases.
Who live away from USA, can't use a wireless charger, becouse it is only available (officially) in the US. It is very hard to find on eBay or any other site. Almost impossible.
Very cheap. The original charging cover at US, Verzion is $29.99. (+ shipping, and need a person who ship it to me) It is only a cover, and we still need a charger as well.
So, I found a charging pad with and without receivers. There was a small problem. The receivers are only for Samsung Galaxy S3, S4 and Note. Their connectors aren't compatible with Droid 4, but the charging voltage is OK.
We need to take it to compatible with Droid 4. I looking for a long time, which one can I choose. Fortunately I made the right decision.
I bought that: Qi Inductive Wireless Charging Upgrade Kit for Samsung Galaxy S3
Link here
That is only for $30.10 with EU plug. The package include charging pad, usb cable, 1500mAh charger and S3 compatible receiver, and worldwide free shipping.
The size of receiver unit is compatible with free space of phone. We need some cutting but it isn't horrible.
First, I recommend you try, how fits the module in your phone.
Then mark with a felt.
The electrical connector pins are big, (and incompatible) we need to remove it carefully. I used a rework station with hot air (360°C) but you can use a medium sized soldering iron. I think, about 50-60W of power is enough. It took for about 30 secs per pin.
It is important, you need to place the receiver in such a manner, if you remove the back cover, the S3 and some other text need to be visible! Otherwise it will not work!
You see backside of the phone, and the camera is on top. Removed cover. In the right side, you can see four copper pins. The top row is irrelevant. We need tha bottom row. In the bottom row, on the left tere is the +5 V pin. On the right, there is a Ground pin.
We need to make contact between +5V pin of the phone and the +5V charging pin of the receiver unit.
Place the receiver unit to the phone, and see what size of copper wire you need. The lower pin of receiver unit is the +5V. We need to connect it.
I used a wire,1 mm in diameter. It is lacquered, I cycled down it from an electrical part (coil).
I think, that half millimeter in diameter is enough, but a found that, and it is recommended due to the relative high current (about 1A).
When you use thinner wire, you can easier take the cover to the phone.
So you need to solder wire to receiver's +5V pin. Please use the minimum quantity of soldering wire, becouse if you make a big knot there, you will have not enough place to take cover back.
When it is done, you can see how can you bend (or cut) the wire for best connectivity with phone's 5V pin.
Now you need to solder a wire to ground, like the previovus one, but not sure, that the two wore have enough space, and we can make easily short corcuit.
For this reason, we will use the iron cover of the SD card slot. This is a very good ground point.
So, one cable will go down, other is go up. They can fit and the soldering is more easy.
PLEASE BE CAREFUL! I recommend, before you make any electrical or hot operating you need to put an aluminium foil or an iron plate to top of the battery. I think to taking out battery and then in, is not easily possible, becouse after soldering there are the receiver. The battery can damage and explosive! The plastic parts of pohone can tolerate the heat for sort time! If you can not solder succesfuly, you need to wait while the parts cooling down! I recommend, use flux and/or high quality of soldering tin. Take out the SD Card! Please don't make short circuit!
It is not too difficult, but you need to be careful and attentive.
When the soldering done, you can try the charger.
Before you can take cover to phone, you need to cut the lower center of receiver. (you can see on the cover, exactly where. There are a claw and on the phone there ara a hole) Important! We need all of holes on phone, so the wires must not hang in to holes.
I cut the piece of receiver unit from lower left side, at the speaker.
Thats all. We are done. I think it longer to read than make :cyclops:
I made some pictures, I will mark these and upload in short time.
I'm going to measure the charging time with:
1,5A USB charger (direct cable)
1,5A USB charger with wireless charging pad
1,5A USB charger with wireless charging pad (phone in a 1 mm thickness of Trident case)
0,5A standard laptop USB (direct cable)
0,5A standard laptop USB with wireless charging pad
0,5A standard laptop USB with wireless charging pad (phone in a 1 mm thickness of Trident case)
I use that from 3 days ago. It works correctly. By the factory, the charging current is 1000mA with the 1,5A charger. About 66% of efficiency.
The USB charger's stand by consumption is 0,4W.
When the charging pad is connected and it is in stand by mode, the consumption is 0,98W
I'm going to bring images, and refresh the post, but here (Hungary, GMT +1) the time is am 2:31.
Good luck guys!
---------------------------------
Uploaded images,
here are the original, better quality images. (11.5MB zip)
That great way to charge the phone. i know that my usb plugin is getting a little wore out.......glad to know that there another way to charge up the phone in case of emergency. Congrats.
Hi,
thanks, it works for me
My IQ receiver was a bit higher, or the battery, so I had troubles to fit it in. My solution was to cut every superfluous piece and pull the uper layer of slide away. Additionally, I put it a bit nearer to the camera, The last thing was to horizontally cut the gold contacts and solder the wire directly on them.
During charging, the usb charger+pad+droid 4 use 7W, without the droid 4 the pad+charger draw 0,4W, both measured at the primary side ot the charger.
Best regards,
mifritscher
Thanks for the info, looks promising I love your using Micro SD casing as GND
BTW the pad + receiver can be found at eBay for as low as US $12 Gonna try out for myself soon.
Did you get to measure the charge times?
LuH said:
Thanks for the info, looks promising I love your using Micro SD casing as GND
BTW the pad + receiver can be found at eBay for as low as US $12 Gonna try out for myself soon.
Did you get to measure the charge times?
Click to expand...
Click to collapse
Charging times are about equivalent
Different approach, same result
Hi, thanx 4 the great idea.
I took a different approach to install the charging pad. I felt not comfortable to solder directly to the phone, so I used copper-tape, capton-tape and some short wires I took from old headphones to mod the pad directly into the back cover of my phone. it got a little bit bumpier (half a mm), but it charges perfectly.
I applied some solder to the ends which connect to the pins, so the copper wont oxidize and the connection has more pressure.
The pictures in better quality:
View attachment goodquality.zip
zuloo.de said:
Hi, thanx 4 the great idea.
I took a different approach to install the charging pad. I felt not comfortable to solder directly to the phone, so I used copper-tape, capton-tape and some short wires I took from old headphones to mod the pad directly into the back cover of my phone. it got a little bit bumpier (half a mm), but it charges perfectly.
I applied some solder to the ends which connect to the pins, so the copper wont oxidize and the connection has more pressure.
View attachment 2842634
View attachment 2842635
View attachment 2842636
The pictures in better quality:
View attachment 2842637
Click to expand...
Click to collapse
That's a nice solution, and pretty much how the "real thing" was probably set up. I noticed that the back has an internal indentation where the pins are to accommodate the connector, and I had experimented with how I might fit a charging pad in there (actually, it was the connectors that I saw as the biggest challenge), but didn't manage to get anything that I thought was robust enough (I was using cut down parts of a SIM card for the pins to make contact with - you look to have done a better job with the copper tape.
I'm really surprised that we can't buy a new back with all of this gubbins already installed - perhaps you should manufacture a few?
mugen 3800mAh inductive charging cover required!!!
i'm tempted to try this myself. the droid4 keeps getting better.
i just experimented with cardboard, seems to have plenty of room between the cover and the battery. i definitely need inductive charging.
Update 2016
@zuloo.de
Hi! I copied your method for wireless charging but I was too lazy for soldering. That is why I used only copper tape. I ordered under 5$ charging pad and receiver for Galaxy S3 (cheap from China) and it is working good. My receiver says that it can output only 0.8A so I guess it is little bit slow. Can you tell your feelings about the heat? I think that my Droid 4 is pretty hot but I never used wireless charging on other phones so I don't know if it is normal. But thanks anyway posting your method :good:
Here is pictures. I tried to take picture about the bump. It is not bad but you can feel it.
Pictures of mod items down below.
Back to the topic of modding the IE Gear VR for the note 4:
I just received my IE unit days ago and had a look at the various modding attempts be it on this thread, youtube or google altogether.
Some do look clean enough still I was pondering the idea of the cleanest sleekiest modding design, while keeping costs to a minimum.
After about 3 days of hectic googling, I came up with the following:
1- 8000mah Note 4 extended battery:
Link: http://www.ebay.de/itm/391342722159?_trksid=p2057872.m2749.l2649&var=660582850100&ssPageName=STRK%3AMEBIDX%3AIT
As opposed to the many more or less higher capacities at about 9000mah up to 10000mah which cover more width area of the phone. This piece at 8000mah has the same proportions as the original battery, only two times thicker.
That should be taken into consideration as the heating parts on the phone when used with the VR are usually around the back camera upper area. Having a normal sized extended battery should leave free room for air-cooling later on. As opposed to the wider kind at say 10000mah (Wink Wink Zerolemon ) that unfortunately cover the heating-up back side of the phone, theoretically causing the air-cooling mod not to work.
Last but not least, this battery at its offered capacity roughly costs 10 bucks. It should be a steal, once I'll confirm it is indeed offering a close enough performance to its claimed 8000mah capacity. More on that soon.
2- USB Cooling Fan
Link: http://www.aliexpress.com/item/1Pcs-Cool-Cooler-Cooling-Fan-USB-Foldable-Folding-Pad-w-2-Fans-for-Laptop-Notebook-Free/32435788330.html
Now to the main course, the cooling!
Most mods I've seen use an elaborate approach based on adapters and long cables.
Now I have found this piece, two fans already USB'ed and sized at :
167*66*20mm (respectively: Length*Width*Thickness)
These proportions should easily fit my rough calculation of the VR removable Front cover which more or less are:
180*80*18mm
USB is a 5V DC easily powered by any powerbank.
Price is just about 3 bucks. well 2,36 euros for me.
More on that after I receive my order and see to it.
Plan is double sided tape. More on that later.
3- Powerbank for the USB Fan:
With portability always in mind and me not willing to give up any aspect of that portability. Mods I've seen around just velcro-strap a sizeable powerbank on the headstrap or backstrap then call it a day. That is neither cool nor comfy. It is of course a matter of opinion and that was mine. Anyhow, here is the link of the smallest powerbank I've seen.
Link: http://www.aliexpress.com/item/keychain-Mini-Powerbank-1800mah-5V-1A-Mobile-Phone-Power-Bank-Mini-usb-Universal-Portable-External-Battery/32585393797.html
proportions: 51.5*41.5*17.5mm
weight: merely 70g
These proportions perfectly fit the left side of the VR where the GEAR VR OCULUS logo is.
It is planned to be installed by surrounding the edges and corners of that logo with thin double-sided tape/Velcro. That should keep the logo visible, harm the appearance as little as possible and hold the 70gram powerbank just fine.
Also more on that when I receive the goods.
The powerbank has a decent 1800mah for something the size of a key (designed as a keychain). That should be enough to run the fans for two days at least, again theoretically.
The price is an alluring 10 bucks or less if site's discount is applied.
Edit: If all works according to calculations, this mini powerbank would be sprayed white so it would fit with the IE Gear VR colors, and not stand out with its gold finish.
Conclusion:
My note 4 with the original 3220mah holds about 3h to 3h30 inside the VR without mods.
With the 8000mah it should hold up double the time or if conservative then a decent 5 hours. Again without cooling.
Double Fan cooling should be extreme as most of the seen mods report no heating whatsoever with just one fan, still lets see if double fans might be the new standard !
The Powerbank is to be installed as plug and play (with velcro) on the side. Just press it in or pull out from the left side. Easy.
The powerbank's own proportions are fitting the left side, so neither appearance nor design are compromised.
At 23 bucks, this is the lowest cost/design mod seen yet.
Well not seen it perse, I have to make it :laugh:
Pictures down below.
Actual DIY mod
Update 07-05-2016
I recently received my orders for the DIY and started working on it.
Challenges were met, but let's keep it brief.
My piece of advice on all this would be:
No matter how good your calculations are (for this particular kind of mod that doesn't involve damaging or altering the cover case but rather duct-taping your way around it):
Always make sure to double check your calculations as you will be working on a Millimeter -mm- basis here. . It literally took me tens of trial and error and loads of patience to find that particular right spot where the two fans don't hit on anything be it the camera or any part of the phone .The concave form factor of the protective cover definitely was of no help as only the center can be used, and that center hardly houses two fans.
So the fans had to be stripped down to the very bone, taking off every single part that had the potential of being removable. (used a heated knife and/or scissors)
The result can be seen in the video, where literally less than 5 millimeters separate the fan blades from the highest point of the phone, being the camera.
I did mention "this particular kind of mod" as not only does it not involve any cutting into the cover nor holes, but also it is built with completely removable material eg: Double-sided duct-tape and double-sided Velcro.
That provides two advantages: a clean design obviously as the title suggests and the possibility to keep your case undamaged and unaltered by simply scratching off all the Velcro and duct-tape at some point in the future, if you decide to.
I haven't received the 8000mah extra battery (mentioned above) yet so I'll update on that at a later date. Although now I highly doubt it would fit with the two fans, if one keeps the protective cover unaltered.
One last piece of advice: a 4mm wide double-sided duct-tape on the back of the battery is a good trick to keep it well snugged in the phone, not suddenly falling down, and still keeps the battery easily removable later on with finger pressure.
Pictures down below, and a short video made just after I finished the project (ps: humming is from something playing on the laptop, the two spinning fans don't make any noise).
Link https://www.youtube.com/watch?v=kXPEArWpgm0&feature=youtu.be
Shoot away your questions, I'll be happy to help!
This is my first attempt at any sort of DIY, and I'm glad it turned out just fine, and also happy I can give something back to this great community!
So much for trying to be brief ! Sorry !
Cheers.
https://imgur.com/a/hhlTgw8
I'm super happy with the results
I bought a more expensive wireless USB type C charger that I thought would charge faster, since it was advertised as a 2000 mah (On amazon, it was gold), but once you open it up it seems to be the same cheap 1000 mah ones.
I did this because my phone is getting old, and I cracked the back glass, and I figured, while I'm inside... I might as well do it.
I had a blast, and I'm super happy with the results, it charges slow, but it works! and I can keep using my wired charger!
Syndor said:
https://imgur.com/a/hhlTgw8
I'm super happy with the results
I bought a more expensive wireless USB type C charger that I thought would charge faster, since it was advertised as a 2000 mah (On amazon, it was gold), but once you open it up it seems to be the same cheap 1000 mah ones.
I did this because my phone is getting old, and I cracked the back glass, and I figured, while I'm inside... I might as well do it.
I had a blast, and I'm super happy with the results, it charges slow, but it works! and I can keep using my wired charger!
Click to expand...
Click to collapse
That's a pretty cool project! Care to elaborate on the steps and materials needed?
One pointer from my end: do not leave this charging overnight or when you're away from the device! Though customizations like this are fun and interesting, they are also a common source of house fires. Risks are probably low here as it involves slow charging but you really don't want to risk it.
Timmmmaaahh said:
That's a pretty cool project! Care to elaborate on the steps and materials needed?
One pointer from my end: do not leave this charging overnight or when you're away from the device! Though customizations like this are fun and interesting, they are also a common source of house fires. Risks are probably low here as it involves slow charging but you really don't want to risk it.
Click to expand...
Click to collapse
I'm making the small guide and I'll post it later
The bad thing is I couldn't really take many pictures, since the phone is what I used to do that, so I'll be using some footage from ifixit teardown video.
So this all began when my phones back crystal panel broke on a fall.
I decided I had to replace it, so I ordered a new Transparent one, since like Jerryrigeverything I love to be able to see the electronics.
While I was at it I figured, why not add wireless charging to the phone? It should be possible, so I looked around for a guide, and I found this one:
https://www.instructables.com/Add-Wireless-Charging-to-Any-Phone-Using-the-LG-V2/
That was way sloppier than what I wanted, but it was a good read, and you can read about what he did.
You will need, a multimeter to check for continuity
A soldering iron, one that can regulate heat so you don’t damage anything, and with the smallest tip you can find
A donor charging receiver
Time and patience.
After that
With help from ifixit (link: https://www.ifixit.com/Teardown/OnePlus+6T+Teardown/115698 )
I opened up the phone, and since ifixit said there was no fingerprint connector you can just go at it, heat, and separate.
Once inside, disconnect the battery first.
The OnePlus 6T has a different design, there’s no pcb for the usb c on the speaker area, it has a connector that goes up to the main pcb, that snaps right next to the battery, since they had to make room for the optic fingerprint scanner.
So I removed the battery, so I could strip the layer of safety glue and make a little more room by peeling away a couple of layers, otherwise this wouldn’t close.
I started probing around with my multimeter for continuity, to do this, I connected the usb type c wireless charge pad (this one: https://www.amazon.com/gp/product/B087TW7MGK/ref=ox_sc_saved_title_4?smid=AQB8EOE9WF3ZF&psc=1 ) after I stripped the protecting plastic cover (to make it even thinner, and to see the insides).
https://forum.xda-developers.com/attachment.php?attachmentid=5118635&d=1603036807
So you connect it and probe the +Vbus and the Ground on that pad, at first I was a bit baffled, since it had pins on both sides, why if it isn’t carrying data, then I realized how stupid I was being, of course, it’s because it’s usb type c, you can plug it in both ways, and it needs to have the correct pins either way.
So I managed to probe around for continuity, and found out these are the correct spots.
https://forum.xda-developers.com/attachment.php?attachmentid=5118637&d=1603036807
I had to remove some of the plastic on the NFC cover to allow the wires to pass, you can see on the final image the route the wires had to take.
https://forum.xda-developers.com/attachment.php?attachmentid=5118639&d=1603036807
As you can see, I also jumped both grounds since it wouldn’t work if I didn’t.
https://forum.xda-developers.com/attachment.php?attachmentid=5118633&d=1603036807
The first one is beefier, but it wouldn’t fit since everything on the PCB was bigger, the thing is, they charged at the same rate when tested with a usb type c power meter around 680-700 mah of charging power with a 10 watt wireless charger.
I ended up using this other one which was cheaper, and also smaller, not as sexy, but that’s the price to pay.
https://www.amazon.com/Version-Wire...48&sprefix=type+c+wireless+cha,aps,185&sr=8-3
so all that was left to do, was place a nice thin sticker on my battery (I miss the red battery days) to make it look a little bit better, and close it up with the transparent back cover (also from amazon).
As a side note, I placed a USB C to C power meter, and these little things do seem to have sensors for when the battery is full, so they don’t overcharge or overheat.
So I left it overnight with a 65 watt PD USB C to C charger, and a wall plug power meter, and once it’s soldered in, it also seems to drop down the charging, and it also stops giving out heat when it’s fully charged, so there might be something on the small PCB for charge detection, or maybe it’s the phones own full charge detection and it stops asking for power, since this would be the equivalent of being connected with a cable.
Still, everyone should operate at their own safety and I’m not responsible if you set your house on fire, but I will continue leaving it overnight.
It charges slowly, but I can also plug in my dash charger, and again, it doesn’t overheat, the PCB on the wireless coil receiver seems to be doing something, maybe.
Does anyone have a broken dual screen case so we can have a peak inside and work out how solder a female usb c port in the case?
im thinking best case, its easy as tacking on the 4 main wires (grd, positive, data0, data1) with female port glued where earphone jack is, or close by,
and worse case have a female usb c plug hand out of the case.
I would pay money to have this mod done. I absolutely can't stand proprietary connections and dongles. WTF was LG thinking ?? I mean seriously. WHY? BTW if you need a dongle (got a case but did not come with a dongle) they are $9 on lg.com (versus the insane $20 to $30 people are scalping them for on ebay and amazon) and S4299869 might get you free shipping (seemed to work for me but then did not work so its iffy)
Why not cut and take out the proprietary intermediate on the V60 case (which NEEDLESSLY stresses the USBc port on the V60 itself making the dual screen case a terrible idea). Cut it out then there's a port open enough to feed in and plug in the regular usbc charger tip to V60 usbc. bamm - done.
Only hurdle is you don't want to pull a cable by it's wire but by the connection mold/base. Tie a string to base and pull that?
because any mod that axes the (very useful and better) headphone jack isn't one I'd dig.
jojoatt said:
Why not cut and take out the proprietary intermediate on the V60 case (which NEEDLESSLY stresses the USBc port on the V60 itself making the dual screen case a terrible idea). Cut it out then there's a port open enough to feed in and plug in the regular usbc charger tip to V60 usbc. bamm - done.
Only hurdle is you don't want to pull a cable by it's wire but by the connection mold/base. Tie a string to base and pull that?
because any mod that axes the (very useful and better) headphone jack isn't one I'd dig.
Click to expand...
Click to collapse
Except if you cut out the port the dual screen case will no longer work, it needs to connect to the phone somehow. The proprietary port is annoying I agree, but the alternative is to have the case chin be over double as thick, which would make using the dual screen case somewhat of a challenge. I don't personally own the dual screen case, I'm planning on getting one, but here's what I would do for charging:
1. For charging overnight take the phone out of the case - if you're just checking your phone in the middle of the night (not saying that's advisable) you probably won't miss the dual screen case all that much. The reason I recommend this is because if you're like me and tend to be unpredictable in your movements during the night, a magnetic connector could become disconnected, or even if you get up for some reason in the night and catch the cable.
2. For charging during the day, or any other time where you may be moving, or using it while charging, I'd do the same thing. I use my phone a lot but I always will have a period during the day to fully charge the phone. I'm guessing the dual screen case will lower the battery life by about 25%, landing us at 5 hours 15 minutes from 7 hours. Examine your lifestyle and search for a 2 hour period during the second half of the day where you're not on your phone. Charge during this time. If you can, use the magnetic connector to charge during this time since it will remove some of the stress of plugging and unplugging the dual screen case, therefore expanding the lifespan of your port. Even if it's just an hour, this is enough to get to around 70% battery, which depending on when you go to sleep should be enough to get you through the rest of the day. I plug my phone in when I'm not using it all the time, this is enough to not have battery anxiety.
I'd also like to say I agree with you regarding the headphone jack. Yes the dual screen case would still be useful on a phone without a headphone jack, but given this phone has it, it would be ridiculous to axe it. As everyone on this forum probably knows, the V60's large and comprehensive collection of features make it irreplaceable, and even removing one of those features would begin to show where newer phones could do better in my opinion.