google translateed:
My lumia822 boot display nokia blue flag after the start, pure blue, no crying face. With the flash tool has an error "this ffu is too big for this device". And press the volume increase and the power button, and the power button and volume reduction, did not respond, can not enter the ffu mode. When using thor2 flash into ffu, just reboot or power for the first time, be able to correctly identify emmc capacity, began to flash , then suddenly aborted, the above-mentioned error occurs when you try again, this time to obtain emmc capacity becomes zero. Tell me how to fix it
org:
我的lumia822开机显示nokia标志后就开始蓝屏，纯蓝色的，没有哭脸。用刷机工具都提示错误“this ffu is too big for this device"。而且按音量加和电源键，以及音量减和电源键，都没反应，进不了那个ffu mode。使用thor2 刷入ffu时，刚重启或者开机第一次，能正确识别emmc的容量，开始刷机，然后就突然中止，再次重试时就出现上面提到的错误，此时获取emmc容量就变为0了。请问我该怎么修复它
Related
was with the original rom lg. and then went instalr the recovery of the cyanogen rom manager app, and then hung up the phone and now the message appears in red at the top of the screen
"Critical Failure: Unable to start Kernel.
Unrecoverable bootloader error (0x00000002)"
and I can not get into download mode to install the original rom again.
and now what do I do? I lost my phone?
you flashed cwm without unlocking your bootloader. re-flash latest jellybean kdz file for your phone using http://forum.xda-developers.com/showthread.php?t=2069723, then read some more about unlocking bootloader, and then start again.
Flying_Bear said:
you flashed cwm without unlocking your bootloader. re-flash latest jellybean kdz file for your phone using http://forum.xda-developers.com/showthread.php?t=2069723, then read some more about unlocking bootloader, and then start again.
Click to expand...
Click to collapse
but now I am unable to get into download mode on the phone. is
" Now just hold down vol - key ( hold hold hold dont release !!!! ) and plug the USB cable until you get screen like this :-"
he does not. whenever I do this it only vibrates strong and goes to the screen with the error message. I do not know why that. remember one time it happened to me already but can not remember how I resolved it is possible to even lose the download mode?
Its not possible afaik. Are you sure you are holding only vol - key and plugging in? Dont hold power key!
yes, I'm almost the whole day trying to get into download mode by pressing volume down + connecting the usb. and whenever it vibrates strong and hangs on lg logo. tried to volume up + usb connect. and no download mode. I'm going crazy with this phone. otherwise hesitate to hard reset? or other shortcut to download mode?
Rafael20. said:
yes, I'm almost the whole day trying to get into download mode by pressing volume down + connecting the usb. and whenever it vibrates strong and hangs on lg logo. tried to volume up + usb connect. and no download mode. I'm going crazy with this phone. otherwise hesitate to hard reset? or other shortcut to download mode?
Click to expand...
Click to collapse
hard reset wont help you, as far as i know, you somehow need to enter s/w upgrade screen. did you try it with battery out?
he battery of the same error, and no battery it does nothing, or vibrate, or flash screen, nothing happens
Will I not be able to see my optimus running again? :crying:
it is not possible to load the kernel, what could I do?
Critical Failure: Unable to start Kernel. Unrecoverable bootloader error (0x00000002)
Rafael20. said:
it is not possible to load the kernel, what could I do?
Click to expand...
Click to collapse
Hi Raphael20 and everyone else,
Did you manage to figure out a solution to this? I have the same issue, i.e. cannot start my phone by holding the power button. Not even when people suggest to get to the S/W Update screen by holding the Volume down + plug into the computer.
I got to this error when I tried to do a factory reset. I installed the ClockworkMod Recovery. Then the factory reset via Volume up + Power button gave me the "Critical Failure: Unable to start Kernel" error. I somehow managed to get access to my phone by holding the Volume down + plug into the computer. Then tried to do a factory reset via the system settings of my phone. My phone restarted and then gave me the "Critical Failure: Unable to start Kernel" screen of death! Now Volume down + plug into the computer gives me the "Critical Failure: Unable to start Kernel", no matter whether I have restarted my computer and I have tried another computer. It seems that the bootloader is wrecked.
Does anyone have any suggestions?
Thanks!
Dear XDA-members,
please try helping me with my problem before redirecting me to some tutorials. I think I already tried all of them and I even opened a thread in a german forum... noone could solve my problem there, yet.
Here's the deal:
-Bootloop in starting screen
-Stock recovery freezes to on boot
-Vol- and Power leads to "Have been in meta mode, long press the power button and the normal boot"
-Yes, I used the new drivers, SP Flash tool and several ROM's
-Yes I disabled driver signature verification
- In SP Flash Tool I checked "DA DL All"
- My OS is Win10x64
If I load a scatter and press "Download" there appears a red bar with "Download DA 100%" followed by "S_FT_DOWNLOAD_FAIL (4008)". I used Google to solve the problem but no succes...
SO if I try "Firmware Upgrade or Format All", the red bar changes to "Format 0%" followed by "BROM ERROR : S_FT_FORMAT_FAIL (4010)".
By now I tryed 3 different PC's and 2 cables. My father's K3 Note could be flashed without any problems on this PC's.
I hope someone can help me please.
DaimonTay said:
Dear XDA-members,
please try helping me with my problem before redirecting me to some tutorials. I think I already tried all of them and I even opened a thread in a german forum... noone could solve my problem there, yet.
Here's the deal:
-Bootloop in starting screen
-Stock recovery freezes to on boot
-Vol- and Power leads to "Have been in meta mode, long press the power button and the normal boot"
-Yes, I used the new drivers, SP Flash tool and several ROM's
-Yes I disabled driver signature verification
- In SP Flash Tool I checked "DA DL All"
- My OS is Win10x64
If I load a scatter and press "Download" there appears a red bar with "Download DA 100%" followed by "S_FT_DOWNLOAD_FAIL (4008)". I used Google to solve the problem but no succes...
SO if I try "Firmware Upgrade or Format All", the red bar changes to "Format 0%" followed by "BROM ERROR : S_FT_FORMAT_FAIL (4010)".
By now I tryed 3 different PC's and 2 cables. My father's K3 Note could be flashed without any problems on this PC's.
I hope someone can help me please.
Click to expand...
Click to collapse
Can't say proper..
But have you tried "adb"..?
adikri said:
Can't say proper..
But have you tried "adb"..?
Click to expand...
Click to collapse
I tried adb flashtool but it doesn't find device...
Nonetheless the phone is recognised by the PC itself.
DaimonTay said:
I tried adb flashtool but it doesn't find device...
Nonetheless the phone is recognised by the PC itself.
Click to expand...
Click to collapse
Is anything related to phone or android showing in windows device manager..?
If not then maybe driver problem..
And even after falshing ptocedure its say "factory mode" then maybe it'll light up by adb command..
adikri said:
Is anything related to phone or android showing in windows device manager..?
If not then maybe driver problem..
And even after falshing ptocedure its say "factory mode" then maybe it'll light up by adb command..
Click to expand...
Click to collapse
Device-Manager shows "Portable Devices>MTP-USB-Device".
I don't believe it's a driver problem because I installed so many of them already and I had the same errors in SP Flash Tool everytime.
When I type "adb devices" in adb flashtool there are no devices shown, though it recognises my other smartphone.
DaimonTay said:
Device-Manager shows "Portable Devices>MTP-USB-Device".
I don't believe it's a driver problem because I installed so many of them already and I had the same errors in SP Flash Tool everytime.
When I type "adb devices" in adb flashtool there are no devices shown, though it recognises my other smartphone.
Click to expand...
Click to collapse
I know this is not the topic but maybe atlesst you can read it..
So after doing the first trick of putting the Lenovo S880 into safe mode (or meta mode?), I tried pressing the Volume Up button. But it’s not working. This time I tried pressing the "Power button and the Volume Up button" and to my surprise a menu suddenly appears. It’s the Factory Mode screen menu of the Lenovo S880!
To cut it short, you should choose ‘Clear eMMC’ to reset your Lenovo S880. You can do this by pressing the Volume Up button to navigate the menu. After choosing the ‘Clear eMMC’ option, press the Volume Down button to perform software reset on the Lenovo S880. It will be quick and short erasing the internal memory of your smartphone and will reboot automatically. After the reboot, the annoying ‘locked’ unlock screen will disappear.
adikri said:
I know this is not the topic but maybe atlesst you can read it..
So after doing the first trick of putting the Lenovo S880 into safe mode (or meta mode?), I tried pressing the Volume Up button. But it’s not working. This time I tried pressing the "Power button and the Volume Up button" and to my surprise a menu suddenly appears. It’s the Factory Mode screen menu of the Lenovo S880!
To cut it short, you should choose ‘Clear eMMC’ to reset your Lenovo S880. You can do this by pressing the Volume Up button to navigate the menu. After choosing the ‘Clear eMMC’ option, press the Volume Down button to perform software reset on the Lenovo S880. It will be quick and short erasing the internal memory of your smartphone and will reboot automatically. After the reboot, the annoying ‘locked’ unlock screen will disappear.
Click to expand...
Click to collapse
Thanks for your effort.
When I press Vol+ nothing happens. Vol+ and Power leads to the meta mode I think (smth in chinese and "Have been in meta mode, long press the power button and the normal boot" appears) as I already mentioned. When I press Vol+ or Vol+ and Power again either nothing happens or the Phone turns off again.
I can't even get into recovery mode becaus my phone freezes at "K3 recovery" screen.
I have problem I formatted my phone via recovery and no system found. My phone going to bootloop after power on Every time i power ON the device it gets to the screen that says "Powered by android" device untrusted and keeps rebooting. Many buttons combos not working. only way to turn device off is battery disconnect. Help
mati5000 said:
I have problem I formatted my phone via recovery and no system found. My phone going to bootloop after power on Every time i power ON the device it gets to the screen that says "Powered by android" device untrusted and keeps rebooting. Many buttons combos not working. only way to turn device off is battery disconnect. Help
Click to expand...
Click to collapse
Only you can do is to flash original firware with NOST flasher.
OK i get this software but i cannot get this phone to download mode and phone has only bootloader unlocked not critical. What i can do?
OK i successfully boot my phone to download mode and all fixed. Thread closed
A friend came in with his tablet that will no longer boot, it will just sit at the verizon logo, he says he took it to a repair shop and they could not fix it. Can't enter recovery only download mode, when I press all the buttons to kick it out of download mode sometimes it will boot to a screen with a small robot and yellow letters that say power pressed 7 seconds and "upload". Port numbers in download mode and the weird upload are different. I can only flash eng aboot or pit anything else gives me the "MDM Mode Can't Download" message. I got engineering fw and regular fw none will flash. It does say "Samsung Official" and "FRP Lock Off" in download mode. That's all I got.
Since this seems to be a difficult subject... Does anybody know where the testpoint is?
It sems it is all in the aboot... LOAD:8F682BFC aMdmMode_CanTDo DCB " MDM MODE. CAN'T DOWNLOAD ",0
Any help guys?
I don't know what happened, today I woke up, pick my phone, anwser a few messages and them suddenly my phone reboot and all goes blank. So I connected it to the power, the cellphone started to blink the blank led light e shows the power symbol over and over, them after a time shows this message: "Start Up Failed" Your device didn't start successfully. Use the Software Repair Assistant on computer to repair your device."
I did what was told, but after all the recover procedure complete the same messages and bliking behaviors starts again. My phone is not rooted. Is there a solution that I can try to solve this issue?
Thanks in Advance.
Motorola G5S Plus reboot
Try this. Start the bootloader (Boats Vol -, + power at the same time), browse with Vol + or Vol-, search for "recovery mode", with power you accept. If "no command" appears on the screen, press power + Vol +. There you have many options. You can do Factory reset.
lokochris said:
Try this. Start the bootloader (Boats Vol -, + power at the same time), browse with Vol + or Vol-, search for "recovery mode", with power you accept. If "no command" appears on the screen, press power + Vol +. There you have many options. You can do Factory reset.
Click to expand...
Click to collapse
Hi lokochris, thanks for answering
When I select the recovery mode, this message appears in the phone: "failed to validate recovery mode. ERROR: Failed to pass validation, backup to fastboot."
The factory reset only reboot again, and again blank light blinking and power logo in a loop.
Motorola G5S Plus reboot
use this method https://www.youtube.com/watch?v=fMWbC_c6758
This youtube method was the first thing I tried. It shows the Motorola logo and returns to the same message. I believe something is blocked, because the Power logo remains in Loop and the white light is flashing.
These results are displayed only when the phone is charging. Without charging or cable on the PC, my phone doesn't even start.
Motorola G5S Plus reboot
Try this. If the problem continues, it may be a hardware problem. I have read over there, if you try to remove google account or unlock bootloader, the phone enters hard brick and it is almost unbrick.
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165#post82964107
lokochris said:
Try this. If the problem continues, it may be a hardware problem. I have read over there, if you try to remove google account or unlock bootloader, the phone enters hard brick and it is almost unbrick.
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165#post82964107
Click to expand...
Click to collapse
Hi lokochris,
What I need to do to run this batch scripts? because the link only talks about the scripts, but not what you need to do to run them.
Moto g5s plus reboot
Just run the one you need ( bootload), connect the phone to the PC and run automatically