Greetings from Argentina !! I tell them my situation , buy a motorola xt1097 brikeado . I am thinking it was just flash a picture and ready , but it was not so easy . turns out my xt1097 has a hard brick , fastboost not start in mode or recognized by the PC, or as " QDLoader Qualcomm HS- USB 9008 " not as " QHSUSB_DLOAD "
I read about this type of brick in moto x first generation and the solution for that cell was a trick wire , my question is , that method is used for xt 1097 ?
S5610 user left a guide and the programs required to operate the phone ( motox1 ) my other question is if these programs serve to revive my xt1097 ? I expect an answer and help .. greetings and thank you very much for reading the post
http://forum.xda-developers.com/mot...ked-moto-x-t2629057/post60224688#post60224688
Here I leave the S5610 the user guide to see what I mean ..:cruza los dedos:
The required files for the 2014 Moto X have not been leaked. You will have to send it in for repair.
Related
My phone is totally bricked not even opening in bootloader. It's only recognized by pc as "qhsusb_bulk". so I signed my phone with "Riff BOX JTAG drivers Driver Signature Enforcement Overrider". after this my phone is recognized as "Qualcomm HS-USB QLoader 9008" under Ports (COM & LPT). Then I extract Motorola qboot utility and then run blank-flash.bat file after that this is showing (flashing singleimageFAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet).
maybe that singleimage.bin file is problematic.
So I need correct blank-flash file for my phone.
Help me guys. thanks in advance.
deleted. Reason : OP edited.
sagar846 said:
Have you tried giving it CPR? (jk)
Just reflash stock firmware.
Link : Click Here
Click to expand...
Click to collapse
edit..
zman01 said:
Very useful post.. Did you read the OP or you're just guessing here?
Click to expand...
Click to collapse
Op edited post. Before there was only hard brick problem given (when I posted).
Well, there is a good chance that you can't do anything about it. But, give as some info about what you did to it, what was the last version of Android or Rom on it, and so on.
Addy K said:
My phone is totally bricked not even opening in bootloader. It's only recognized by pc as "qhsusb_bulk". so I signed my phone with "Riff BOX JTAG drivers Driver Signature Enforcement Overrider". after this my phone is recognized as "Qualcomm HS-USB QLoader 9008" under Ports (COM & LPT). Then I extract Motorola qboot utility and then run blank-flash.bat file after that this is showing (flashing singleimageFAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet).
maybe that singleimage.bin file is problematic.
So I need correct blank-flash file for my phone.
Help me guys. thanks in advance.
Click to expand...
Click to collapse
I get the same place in my moto g 2014 xt1069. Do i have any chance to create a blackflash from original lollipop ROM?
EDIT: blankflash*
marcoslucianops said:
I get the same place in my moto g 2014 xt1069. Do i have any chance to create a blackflash from original lollipop ROM?
Click to expand...
Click to collapse
Nope, you don't have any
Addy K said:
...
Click to expand...
Click to collapse
Can you give me the files you used?
Well this guide might work for you guys. Its for the moto g1 but everything used in the guide is kind of the same for all moto devices except the firmware. Don't forget to download the correct firmware for your phone :
Click Here
sagar846 said:
Well this guide might work for you guys. Its for the moto g1 but everything used in the guide is kind of the same for all moto devices except the firmware. Don't forget to download the correct firmware for your phone :
Click Here
Click to expand...
Click to collapse
This won't work, ^^ the "blank flash" in the tutorial you've sent us, is only for the Moto G 1st gen, i've already tried it ^^ this is not compatible :/
This is why we need the blank flash for the Moto G 2014, then this tuto will work ^^
Miiick3y said:
This won't work, ^^ the "blank flash" in the tutorial you've sent us, is only for the Moto G 1st gen, i've already tried it ^^ this is not compatible :/
This is why we need the blank flash for the Moto G 2014, then this tuto will work ^^
Click to expand...
Click to collapse
Check the firmware download link again (file factory). There are 5+ pages. Find the right firmware for your phone (Itll be labelled TITAN CFL blah blah)
Flash it.
Direct link : Click Here
sagar846 said:
Check the firmware download link again (file factory). There are 5+ pages. Find the right firmware for your phone (Itll be labelled TITAN CFL blah blah)
Flash it.
Direct link : Click Here
Click to expand...
Click to collapse
Thanks for help, but i can't flash anything, my phone is only recognized on my pc as a qualcomm communication port ^^
Addy K said:
My phone is totally bricked not even opening in bootloader. It's only recognized by pc as "qhsusb_bulk". so I signed my phone with "Riff BOX JTAG drivers Driver Signature Enforcement Overrider". after this my phone is recognized as "Qualcomm HS-USB QLoader 9008" under Ports (COM & LPT). Then I extract Motorola qboot utility and then run blank-flash.bat file after that this is showing (flashing singleimageFAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet).
maybe that singleimage.bin file is problematic.
So I need correct blank-flash file for my phone.
Help me guys. thanks in advance.
Click to expand...
Click to collapse
@Andy K
Found the reason why it didn't work. That is because that method is used to rescue Qualcomm Snapdragon devices. Our device is Qualcomm based so yeah. Here's a kinda detailed explanation
Owners of Qualcomm based LG’s, HTC’s, Samsung’s, Sony’s and Motorola’s, im afraid this tool is not suitable for you, because those liers mostly have chosen not to use default options of this platform, they dont (cant) want us to rescue our phones so easly, what would have happened to their service centers all around the world then ? They need to change “The Motherboard” in spite of the ability to fix this problem so easly to earn more and more and more money.
Site Link : Click Here
I was on stock Marshmallow 6.0 rom. Then I flashed stock Lollipop 5.0.2 rom in my phone and then I was updating my phone to new stagefright patch but after switch off my phone didn't turn on again.
My last android version was Marshmallow 6.0. I downgraded my phone to Lollipop 5.0.2 and tried to update latest stagefright patch from system update. But after switched off my phone never turn on again. Whenever I connect my phone to the charger it's shows nothing but white led light for 10 seconds. And my phone recognised by my PC as "qshusb_bulk".
Need Moto G 2nd Gen "blankflash image" to flash new bootloader.
As the bootloader of my phone has been collapsed so I need to flash a new bootloader to my phone to relive. But I don't have the right file. And I don't think there is any blankflash image of my phone (XT1068) is available on the net. So I just need to know that is there any way to extract these file from Stock ROM?
Addy K said:
As the bootloader of my phone has been collapsed so I need to flash a new bootloader to my phone to relive. But I don't have the right file. And I don't think there is any blankflash image of my phone (XT1068) is available on the net. So I just need to know that is there any way to extract these file from Stock ROM?
Click to expand...
Click to collapse
No there is no way. I think they already got 5.0 singleimage, but the problem is with programmer.mbn. Without motorola signature it won't flash the bootloader..
still no hope...
Do you have 5.0 or 6.0 singleimage file?
am stuck in the same position. the company has to come up with the new bootloader file. or upload the xt1068 bootloader. one method is throught riff jtag . but very few repair guys have that box. in mumbai they charge 1000-1500rs to repair such phones
Hello everyone.
I know there is a user who asked, but no answers given to him in 2014, now in 2016 I'm asking again.
Last night was doing downgrade in my XT1069 Android BR 6.0 to 4.4.4 factory, so far so good, worked normal. From the moment I was installing the OTA's, when arrived at the time of the OTA 22:21:28, finishing the process, the phone does not start, I believe that corrupted the bootloader.
Recognizes "qhsusb-bulk" as "Qualcomm HS-USB QDLoader 9008".
After so see that this is common, and it's hard to find a "programmer.mbn" compatible, I wonder if there is a solution, without having to replace the motherboard?
I took a look at "QPST program", "flashblank", "qboot" but unfortunately walked working with who has the "Moto X" and some users "Moto G 2013".
Is there any way back up the eMMC from another device?
Welcome to the hard bricked Moto G 2014 club!
We need a "blank flash" image to unbrick our Moto G 2014, but Motorola doesnt want to release it
There is a lot of people that have the same problem, atm there is no solution unfortunately
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Ma.Style10 said:
Hello everyone.
Is there any way back up the eMMC from another device?
Click to expand...
Click to collapse
plz notify me if it works..
c_/\/\_k said:
plz notify me if it works..
Click to expand...
Click to collapse
unfortunately it does not work
looking for solution...
c_/\/\_k said:
plz notify me if it works..
Click to expand...
Click to collapse
Unfortunately it does not work on Moto G 2014.
I saw this page, until it seems to work, but unfortunately the motorola does not release the programmer.mbn compatible with "blankflash", "qboot", "QPST", anyway.
One morning i restarted my phone( Moto G 2nd gen.) with Android Marshmallow because it went slow, but after that it restarted in fastboot mode when i pressed the power on button. Normal startup or recovery were also not working.
I checked this forum, then unlocked the bootloader and downgraded to Android 4.4.4 . My phone operated well, then at night it started asking for lollipop update again and again, i allowed for OTA update (that was my biggest mistake), and after downloading the data and during update, my phone went off and didn't start again.
Although the indicator light glows solid for sometime when connected to wall charger or to PC via USB cable.
I have tried blankflash, ADB and fastboot utility, Volume down + Power combination, pressing power button for over 120 seconds, but all in vain.....
Please suggest me a way to solve this problems, i have important data in my phone and i want to save those too.
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Feel blessed, you don't have to use moto g anymore.
Anniepoo said:
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Click to expand...
Click to collapse
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
aninishu said:
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
Click to expand...
Click to collapse
. I wish I could say it was, but unfortunately Motorola won't release this file. There have been some serious attempts to solve this problem but none have succeeded.. As far as I know the only way to fix this problem is by getting a new motherboard..
Hellow
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Diego799 said:
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Click to expand...
Click to collapse
no blankflash.zip for our model available
if you are from india then you can try out this solution for xt1068 by an guy mobile unbrick something contact him but remember it will be paid not free
Code:
https://www.youtube.com/watch?v=WynBaVyW0oU
if you from another region then need to wait for blank flash zip
There are some methods to extract the partition layouts...one can be using dd cloning & extracting img files...another can be through B2bSupportLg Tool, also calleld BoardDiag. It does have MSM8226 chipset option, but that device is W7 G2MDS. Take a working Moto G 2014 from someone, ask them to use this tool to extract the partition schemes, then you'll get .mbn files, especially prog_emmc_filehorse_msm8226.mbn . Use that to dump into the bricked device using either QFIL Tool or use this blankflash tool, replace it's singleimage files with the one you got, then execute blank-flash.bat.
Also I had some emmc prog firehorse files, all 4 related to 8x26...You can try those & confirm me if they work or not
Hello! this is my first post , excuse me if do not write anything readable .
I am Brazilian and I am using Google Translate.
I've been searching for a way to resurrect my moto g second gen xt1069 , like many I found he does not care and does not come into FlashBoot after I go back a version and try to update it .
I want to know if there is any way to install something without FlashBoot or even regain FlashBoot .
Thanks for everything!
It is not possible.
help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
Slow down...
Give some (as much as possible really) details as to what you've done to end up where you are.
Preferably in a normal non-centered text because what you've done there is hard on the eyes (read: annoying) and almost put me off answering...
Prince_Eugen said:
help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
Click to expand...
Click to collapse
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.
zelendel said:
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.
Click to expand...
Click to collapse
ok thaks but what should i do now ?
Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.
Strephon Alkhalikoi said:
Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.
Click to expand...
Click to collapse
wake up found it stuck in bootloader i didnt do anything
i cant flash rom or do any thing
If you have no ROM, cannot enter recovery, and did nothing to bring this state of affairs about, your phone most likely has a dead EMMC storage chip. You can verify this by trying to flash a stock ROM using the fastboot command, but be aware that attempting to use that Lenovorola program you mentioned could have done significant damage to the device, as that program is not intended for this device.
Should we be able to confirm a dead EMMC chip, there's not that many options available. If you are still under manufacturer warranty you can send the device to Lenovorola for repair at no cost. Otherwise, you'd have to pay for the repair. You could instead purchase a replacement, or purchase a device with a broken screen and swap motherboards (and SIM trays).