Related
Hi!!
First, I was trying to find some solution, here and google, but every one that could work, don´t.
I was trying to install CyanogenMod 10.1
I followed the installation guide... but when I have to choose CM zip file, I choosed another one from other sell (I was using the same card)
The CM that I use was this: cm-7.2.0-jordan.zip (from a defy phone)
instead cm-10.1-20130621-NIGHTLY-janice.zip
Everything goes bad since that.
I tried to wipe data/factory reset:
E: format_volume: fs_type "ext3" unsupported
E: Can´t mount /cache/reovery/log
E: Unknow fs_type "ext3" for /cache
I tried to update from external storage
But only shows me this: " ../ "
I tried to apply update from ADB
I followed the guide, copy the roms on self directory, put the 4 files on c:\windows , etc.
This are the common errors that shows me:
C:\Windows\Herramientas Sideload>adb sideload gapps-jb-2013
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
* failed to write data 'protocol fault (no status)' *
I tried kill the adb.exe like this, but doesn´t works
error: closed adb
I tried this but doesn´t works
I found nothing that could help more, so that´s way I making this post.
Here is some data:
GT-i9070
Windows 7 64bits
Kies updated (but could connect to the device now)
I think that drivers of the cell are updated, because windows shows me that... buy i don´t know if is the correct one.
I will be very grateful if you can help. I hope this can be fixed ..
Best regards!!
PS: sorry my english.
Can you enter in download mode with vol down+home+power when phone is switched off?
I didn´t know that.
Yes, now is in downloading mode:
Do not turn off target.
My pc can´t recognize it
Mr.BUBU said:
I didn´t know that.
Yes, now is in downloading mode:
Do not turn off target.
My pc can´t recognize it
Click to expand...
Click to collapse
Reflash stock jelly bean with Odin, then flash CoCore kernel for CWM recovery, and retry to flash CM10.1. To do that:
1-Because your pc doesn't recognize the device uninstall Kies and install only usb drivers (you can download install package here)
2-Download Odin and i9070 Stock Jelly Bean firmware from samfirmware (I recommend i9070XXLQG PDA)
3-Extract downloaded zip, you will find three files (one .dll, one .pit and one .tar.md5)
4-Launch Odin, select "Re-Partition" and leave others as they are. Press "PIT" button and select .pit file in extracted firmware's zip file, then press "PDA" and select .tar.md5 file in same directory.
5-Enter in download mode like I said you early and connect device to pc, press "Start" button on Odin and wait for the "SUCCESS" message, now your phone should power on normally.
6-Now download this zip file (for obtain root access) and put in sd card (micro sd, not internal memory!)
7-Turn off your phone, press vol up+home+power to enter recovery, select "apply update from external storage" then select root.zip, reboot device.
8-Now you have stock jelly bean rooted, update SuperSU from Google Play and install Universal Kernel Flash from frapeti (you can find it on Play Store).
9-Download CoCore Kernel here, take kernel.bin.md5 file from zip package and put it in internal storage.
10-Launch Universal Kernel Flash, select kernel.bin.md5 and flash it.
11-Power off phone and enter again in recovery with vol up+home+power, now you should have CWM-based recovery, select "backup and restore" and take a full system backup.
12-Wipe data, cache and dalvik and retry to install CM10.1-janice, in case something goes wrong or you want to remove CM without flash again with Odin you can restore your system backup from CWM.
If you have a doubt I'm here to help you
Problem:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQG_I9070OXXLQG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
8(
There wasn´t a .pít file on the i9070XXLQG
I found one from Odin3-v1.85.zip
Could be that why is wrong? I´m downloading one more... this time without the Kies sign. I bet that is the probelm.
it´s getting worst
Now when I turn on the phone, the screen looks with diagonals strips.
And only the download mode is working... no more for upload mode.
:crying:
Well... i was looking for that error... and could be the cable and the usb port.
I changed each one, and still don´t works.
Remove the SD, remove the sim, and every time get me the same error.
Anything else?
Which .pit you have? The name of the correct one is: GT-I9070_EUR_XX_8G.pit for 8GB memory. Your have 8GB or 16GB of memory?
This one, but it came with the odin... I think.
u1_02_20110310_emmc_EXT4.pit
I will look for the correct one :good:
Mr.BUBU said:
This one, but it came with the odin... I think.
u1_02_20110310_emmc_EXT4.pit
I will look for the correct one :good:
Click to expand...
Click to collapse
Always use specific pit file of a device, each Samsung device have it, for example I can't use i9000's pit file on i9070. Which model is? 8 or 16? Because the two models have different pit file
Now I know...
8gb model.
Mr.BUBU said:
Now I know...
8gb model.
Click to expand...
Click to collapse
Okay, the correct file is the one that I said you, you can find it here on xda or with Google, I have it on pc (I'm writing with phone) but here in Italy is too late and I'm going to sleep if you can't find it I can upload it for you
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
:laugh:
It´s alive !!!
And with CyanoGen working
I had to avoided some steps, because no one version let me get in the Os. Every each stop working when complete the time of the cell. Never been able to install Super Su for example.
So... I take the CM janice and the gapps cyano and at least is working. :victory:
Now to test and re test... before installing everything else.
Thanks you so much. I was affraid to had broke the cell for ever.
You really known about this... thanks for help me :good:
Mr.BUBU said:
THANKS YOU
Click to expand...
Click to collapse
next time, don't mix up the devices, files or steps. then you'll be fine.
Sent from a rice cooker
Mr.BUBU said:
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
:laugh:
Click to expand...
Click to collapse
Excellent, next time be careful when you're flashing roms
Thanks for the advice harith.unnikrishnan and Tesla-MADAL93
I have root some, but never flash roms. Always there is a first time... in my case was catastrophic
Best regards!!
Mr.BUBU said:
Thanks for the advice harith.unnikrishnan and Tesla-MADAL93
I have root some, but never flash roms. Always there is a first time... in my case was catastrophic
Best regards!!
Click to expand...
Click to collapse
Don't worry, the important is that now it works
Mr.BUBU said:
Thanks for the advice harith.unnikrishnan and Tesla-MADAL93
I have root some, but never flash roms. Always there is a first time... in my case was catastrophic
Best regards!!
Click to expand...
Click to collapse
It was not catastrophic. It would be if you flashed wrong firmware with Odin. :silly:
shut_down said:
It was not catastrophic. It would be if you flashed wrong firmware with Odin. :silly:
Click to expand...
Click to collapse
I agree with you, shut_down
Hi , i need a little advice on this n-7000 issue please, heres the background.
Bought phone from ebay£100 working fine with a german DBT rom installed( was a german phone as it was main language on reset)
Used fine for 3 weeks except buying better battery.
Flashed philz cwm6 5.08.5 giving me root and 6.0.3.3, alls well.
Tried to upgrade via odin to a 4.4 cwm but fails so i di it through a zip and starts bootloop, wipe reboot no good still the same.
Reload stock via odin, passes but still loops, efs error.
I had somehow wiped the efs folder and not knowing what an efs folder was didnt have a backup so after 9 hours of reading, flashing back to gb and then rooting to make sure the efs was empty via ktool and explorers it was off to samsung after a stock jb via odin to go back to bootloop.
Thankfully phones just in warranty so new pda and usb and they flash it with LT9XEU.
So i have it back root with Philz-cwm6-XXLT9-ORA-5.08.5-signed(does the orange make it an issue on an open device?)and it works fine and runs fine and i back up the efs folder to a million places with 3 different programs.
Problem i have is, i want a 4.4 rom like most people but i cannot get a cwm with selinux support to run on this phone...heres what i have tried,
Installing philz_touch_6.26.6-n7000 on top of the 1st cwm which gives me black screen after 1st logo not getting to samsung one, but if i boot straight into recovery it does tell me im on 6.0.4.8.
Tried to install philz_touch_6.26.6-n7000 from scratch but get error status 7 in /tmp/(cant remeber)/package.zip.
Tried to install raw_kernel_r4_j43 before asylum rom install but this failed on signature.
That was last night and i thought id ask before trying anything else.I have reflashed stock back on this 6-7 times in 24 hours trying to sort this but im going round in circles.
I can flash the rom in odin no problem but never a recovery file it fails everytime.
Is it as simple as you have to install the 4.4 rom after new cwm as the old jb cant handle it hence the black screen or is there something else i need to do, any help is most welcome as after avoiding a £200 repair bill for a £100 phone i continue with some trepidation, many thanks all.
What's the current situation? Are you able to get into recovery? If yes, what's the recovery?
The phone is running as normal, stock rom and recovery...left it like that after fresh install last night.
Running N7000XXLT9_N7000OXXLT3_XEU with its stock recovery
So if you want to install kitkat, flash Philz kernel first to get Cwm.. Then flash raw kernel.. Reboot into recovery and wipe and install kitkat rom.
Thank you, doing it in that order worked for me,so many threads its hard to find clarity...i thank you for your time.
working in my phone without any ERROR.
Flashing Philz fails
Kael ruch said:
working in my phone without any ERROR.
Click to expand...
Click to collapse
I am having a similar problem to Kael and could do with some help guys
This is my phone:
Model: GT-N7000
Android Version: 4.1.2 (stock rom)
Band Version: N7000XXLT3
Kernel Version: 3.0.31-1103517, [email protected]#3, SMP PREEMPT Tue Jun 4 20:55:52 KST 2013
Build Version: JZO54K.N7000XXLT9
Odin fails flashing philz_touch_6.12.8-n7000.tar with the following error
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am hoping to flash Kit Kat 4.4.4 via Omni ROM . To do this I believe I need to load a ClockworkMod-Recovery - WITH SELINUX SUPPORT which is why I am trying to flash philz_touch_6.12.8-n7000.tar.md5. It fails everytime. If I flash an older version of Philz I understand it won't be compatible with Kit Kat 4.4.4. Is that correct?
Any suggestions would be appreciated
Flash Raw4 kernel, reboot recovery again, do all wipes and format and flash 4.5.x Rom and GApps...
User_99 said:
Flash Raw4 kernel, reboot recovery again, do all wipes and format and flash 4.5.x Rom and GApps...
Click to expand...
Click to collapse
Thanks very much for your help.
I am fairly new to all this and a bit nervous about screwing up and bricking my phone. However, the fact that your reply is succinct, gives me confidence that you advised on this problem before and your method works. I don't understand everything you have listed but I am sure I can find the answers to all I need in this forum.
A couple of things
1) A Raw5 or 6 kernel is available, should i go for one of these. http://forum.xda-developers.com/showthread.php?t=2397000.
2) At what point do I backup so I can recover if things go wrong and how would I do this backup. My phone is not rooted yet.
I appreciate your time. Thank you.
The instructions I was originally trying to follow were these.... http://forum.xda-developers.com/showthread.php?t=2780703
2. Installation procedures
If you are on the stock Jelly Bean/ICS Samsung firmware:
-Download Philz kernel and copy it to your SD card
-Download a KitKat ROM and copy it to either your internal or external memory
-Download PA-Google Apps and copy it to either your internal or external memory
-Download Raw Kernel r5 and copy it to either your internal or external memory
-Reboot to recovery by holding down volume up, power and home button at once until you are in recovery mode
-Flash Philz kernel
-Go to "Mounts and Storage" and format /system, /data, /preload
-Reboot to recovery again by going to "advanced", "reboot to recovery" or by holding down volume up, power and home button at once until you are back in recovery mode
-Flash Raw Kernel
-Reboot to recovery again
-Flash your ROM
-Flash PA-Google Apps
-Reboot
You have a XXLT9 Rom so search in PhilZ Thread for such a Kernel. You can also use a similar one like lt6, lt4, lta. With this Kernel you can root your phone and get a custom recovery in one step. Now you can make a nandroid of your current rom.
Now time for kk. Flash Raw4/5 Kernel and follow the instructions you wrote.
If you want to go back flash Philz Kermel and after thst recover your nandroid backup of your stock rom.
User_99 said:
You have a XXLT9 Rom so search in PhilZ Thread for such a Kernel. You can also use a similar one like lt6, lt4, lta. With this Kernel you can root your phone and get a custom recovery in one step. Now you can make a nandroid of your current rom.
Now time for kk. Flash Raw4/5 Kernel and follow the instructions you wrote.
If you want to go back flash Philz Kermel and after that recover your nandroid backup of your stock rom.
Click to expand...
Click to collapse
Thanks for your last reply. This all makes sense to me now.
I have found a PhilZ-cwm6-XXLT9-ORA-5.08.5-signed.zip file so I reckon I'm ready to go with these instructions.
Take care and cheers.... John
Should work and good luck...
[Q&A] [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/2
Q&A for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problem Flashing TWRP to T-Mobile Note 4 in ODIN...PLZ HELP
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Ttw626 said:
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Click to expand...
Click to collapse
Can you try verifying the md5 of the file from the place you downloaded TWRP from?
How do I verify it
re: odin flash issues
Ttw626 said:
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Click to expand...
Click to collapse
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
bigbiff said:
Can you try verifying the md5 of the file from the place you downloaded TWRP from?
Click to expand...
Click to collapse
How do I verify it?
---------- Post added at 02:25 PM ---------- Previous post was at 02:13 PM ----------
Misterjunky said:
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
Click to expand...
Click to collapse
Misterjunky i think relock is on in the phone ill disable it and try again i didnt think of that before thanks.
Misterjunky said:
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
Click to expand...
Click to collapse
Great it took this time thanks alot sir :good:
@bigbiff...VZW Note 4 stock recovery image is here....
http://forum.xda-developers.com/showthread.php?p=56385923
Sent from my HTC Rezound / ADR6425LVW using Tapatalk v2.4.13
nicee 5*
I accidentally wiped my sd card in twrp and now I'm having trouble downloading from a lot of apps. How can I fix this? Would I have to Odin back to a stock firmware to get it back to where it was? Titanium back up and other apps say I have insufficient space, but I know I have a good amount. I reflashed the ROM I've been on and started fresh, but I'm still having issues. Thanks in advanced.
re: titanium backup
paranoid android85 said:
I accidentally wiped my sd card in twrp and now I'm having trouble downloading from a lot of apps. How can I fix this? Would I have to Odin back to a stock firmware to get it back to where it was? Titanium back up and other apps say I have insufficient space, but I know I have a good amount. I reflashed the ROM I've been on and started fresh, but I'm still having issues. Thanks in advanced.
Click to expand...
Click to collapse
Uninstall titanium backup and re-download/install it from the play store then have titanium backup
detect backup location under preferences>backup location in settings then restart titanium backup.
Once you do that it will work fine.
Good luck!
TWRP 2.8.1.0 is not installing on my Tmo Galaxy Note 4
I don't know what's going on guys. I know I am doing everything the right way but for some reason whenever i get back to turning the phone off hitting Vol up/Home/ Power key it takes me to the android boot screen vs the twrp android boot screen.
I am using the img.tar file in odin under the pda option
I have odin set to auto re-boot
i turn the phone off and hit the command
nothing.
Using this twrp in odin
openrecovery-twrp-2.8.4.0-trltetmo.img.tar
if someone can please help me out greatly appreciated.
Is the phone rooted? With bootloader unlocked? Did u use CF auto root?
If so u can flash recovery with FLASHIFY [ https://play.google.com/store/apps/details?id=com.cgollner.flashify] from the play store. Just download the .IMG file for TWRP in the app and let it flash it.
Sent from my SM-N910T using XDA Free mobile app
Thanks for your help man I did end up figuring it out. For some reason the auto reboot was causing the issue. I had to turn that off and manually pull the battery out etc for it to work.
Worked great and I'm now running cm12
thanks for this
I'm guessing twrp 3.0.0 dosent work for the kindle fire (otter) right?
AlbGol said:
I gave you the correct file for what you need to do if you have the n910t, for more specifics look the post above me.
Here is the correct way of installing twrp 3.0 image file, straight from your existing recovery (twrp)
When you boot into your current Recovery 2.8.7.0 and click on Install - Bottom Right you'll see a Image Button - Click on this - The next Screen will show Boot and Recovery - You want to click on Recovery and Swipe to install.
Thats it. (All the phones that I did this were N910T, so was the image file for my device trltmo)
Here is the direct link for twrp 3.0 image file for 910t
https://www.androidfilehost.com/?fid=24407100847294047
Also if u have different model(carrier) just find it here and follow the steps:
http://forum.xda-developers.com/not...-utility-twrp-2-8-1-0-teamwin-t2915588/page44
Click to expand...
Click to collapse
Hey, HUGE problem here. I did this I may have totally bricked my phone. im freaking out.
Please help me
Stuck on recovery booting and cannot even get into download mode. Plugged into comp, I do get a chime .
Is it time to Jtag?
What are my options. Please help
Remove battery, install battery...use button combo to enter download mode and flash 2.87 with odin...
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed/ TWRP 3.0.0-0.trltevzw
manbat said:
Remove battery, install battery...use button combo to enter download mode and flash 2.87 with odin...
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed/ TWRP 3.0.0-0.trltevzw
Click to expand...
Click to collapse
Button combo does not work, goes to recovery booting loop. This is the problem. That's the first thing i did. I haven't seen a hard brick on any of my devices in 12 years.
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
andrew59it said:
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
Click to expand...
Click to collapse
so, what is your question actually??
Mate, I think the question is simple.
From what I understand in your comment, it seems you tried to install the Stock Rom 4.1.2 Italy, when you were the 4.0.4 / 4.0.3 Stock Rom Italy. On installation through ODIN pc you had a problem where it remains in the Samsung logo, will not let you enter the Recovery mode, only the Download mode. Is that so?
I should arrived that case do not leave any triangle would remove the battery, and after 10-15 seconds reintroduce it, and just then press buttons to enter the Recovery mode. If it fails, repeat the removal of the battery, but now when placed connect the DC charger to the phone I tried to turn normally to 20-25 seconds (just outside and away the logo of battery charging), and try to turn it on Recovery mode again, but we will keep down so long that should disappear all as to turn it off, and you press the keys for the Recovery mode, this time releasing anything else lighting appear on the screen, just a moment before letters GT-N7000, now if it really is accessible Recovery should apparate.
If you enter Recovery Mode Stock Samsung, you will have look out if a line appears below indicating the application, or wondering whether to apply the new CSC, we accept without thinking, since it must reaffirm the phone to initiate a Stock Rom.
Now if I come to this moment really was not accessible Recovery mode should get a screenshot of ODIN pc which finishes entering files to mobile, if it were really a fault, and do not leave do the installation, if you checked any box incorrectly, of which are not activated.
Other options include USB cable failure, USB port, lack of USB debugging enabled before starting the installation, do not put at least 10 minutes in the backlight time (this can try to fix running a finger across the screen every 23 seconds if it was 30 seconds off), but that the capture can determine ourselves if the error is only for ODN pc, which can be a failed in the installation and have not really finished the installation, in this case it would be almost insurance problem USB cable used, and in extremis or USB port.
fusionero said:
Mate, I think the question is simple.
From what I understand in your comment, it seems you tried to install the Stock Rom 4.1.2 Italy, when you were the 4.0.4 / 4.0.3 Stock Rom Italy. On installation through ODIN pc you had a problem where it remains in the Samsung logo, will not let you enter the Recovery mode, only the Download mode. Is that so?
I should arrived that case do not leave any triangle would remove the battery, and after 10-15 seconds reintroduce it, and just then press buttons to enter the Recovery mode. If it fails, repeat the removal of the battery, but now when placed connect the DC charger to the phone I tried to turn normally to 20-25 seconds (just outside and away the logo of battery charging), and try to turn it on Recovery mode again, but we will keep down so long that should disappear all as to turn it off, and you press the keys for the Recovery mode, this time releasing anything else lighting appear on the screen, just a moment before letters GT-N7000, now if it really is accessible Recovery should apparate.
If you enter Recovery Mode Stock Samsung, you will have look out if a line appears below indicating the application, or wondering whether to apply the new CSC, we accept without thinking, since it must reaffirm the phone to initiate a Stock Rom.
Now if I come to this moment really was not accessible Recovery mode should get a screenshot of ODIN pc which finishes entering files to mobile, if it were really a fault, and do not leave do the installation, if you checked any box incorrectly, of which are not activated.
Other options include USB cable failure, USB port, lack of USB debugging enabled before starting the installation, do not put at least 10 minutes in the backlight time (this can try to fix running a finger across the screen every 23 seconds if it was 30 seconds off), but that the capture can determine ourselves if the error is only for ODN pc, which can be a failed in the installation and have not really finished the installation, in this case it would be almost insurance problem USB cable used, and in extremis or USB port.
Click to expand...
Click to collapse
Thanks to reply.....
I was not really clear probably.
I tried to install 4.1.2 over 4.0.4 dedicate rom (3 H3G italian operator)
Odin always failed hanging or giving some fault
So I installed the ICS kernel (or rom) everything was fine. So I suppose the cable is ok , odin is ok etc....
But from the moment I downloaded the ICS, at reboot the phone hang on samsung logo with yellow triangle. ANd if I try to switch off the phone it restart and hang on logo.
Download mode is still working but recovery mode not.....
I'm looking for some kernel, rom, cwm to download, to recover the phone.....
The best thing to do is reinstall the ROM 4.1.2 (the 4.0.x are more dangerous if we wipes, JellyBean when they are not), but check that no error appears, if it appears only after installing the Rom rather fails during it, you can download the kernel Philz for you version, right now if you tell me the link to SamMobile I can tell you what, so you can tell which is correct, although it is not hard to tell if you look at the post of Philz above kernel with all links to them. After installation and download the kernel, you turn the phone into Recovery mode, you select mount usb (I think it came out well, but stresses) and connect your phone to your pc, you can pass the kernel to the internal SD and another copy to the SD external (remember to leave both copies at the root of both SD's). You MUST complete the transfer and disassemble with the option displayed on screen, and disconnect the USB cable. You continue by going to install zip, and should be able to select the Kenel Philz to install, after installing (if you get an error: Status 7 quiet, it was not the correct version of the kernel, and not actually installed), you will have to restart the mobile again, but when you start on with the letters GT-N7000, you will have to restart it by pressing Vol + - Power - Home, all at once, and keep it until the letters again, and keep it until it goes - restart, then you press the 3 keys, and when the letters appear, you must drop the 3 keys, and should you appear the menu Recovery kernel Phliz, there as you will see below something that says CSC implemented or instead ask if you want to apply, accept if you ask, and you should be able to restart the phone and wait about 5 minutes maximum to emit sound and vibration as it is booting at all, and then you should be able to start getting bills from Samsung and Google.
Thank fusionero
the problem is I'm not able to install the 4.1.2 , odin hang or fail
The ROM version I need is
sammobile.com/firmwares/download/22314/N7000XXLT9_N7000ITVLT3_ITV
So I think nex step is to install kernel Philz but I don't know which version I need. On the phone was installed 4.0.4 build IMM76D.XXLRL
CIAO
You must enter this http://www.sammobile.com/firmwares/download/22314/N7000XXLT9_N7000ITVLT3_ITV.zip/ address, and you must connect to you account to download that version you mention, I just check and this downloading smoothly on my pc . The problem is that it would open without ending .zip or you caught hours of server failure, just that i found this morning when downloading another who asked me.
As to what you mention about the version you have installed, as you are looking at the correct thread ( http://forum.xda-developers.com/showthread.php?t=1901191 ), the kernel you need for what you indicate ( 4.0.4 build IMM76D.XXLRL CIAO ) is this:
Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:
http://www.mediafire.com/?3ale6m9q6b6a3
Updated kernels list:
PhilZ-cwm6-BULR1-SWC-v3.99
PhilZ-cwm6-DDLR6-ODD-v3.99
PhilZ-cwm6-DDLR9-INU-v3.99
PhilZ-cwm6-DDLRB-ODD-v3.99
PhilZ-cwm6-DXLP9-OLB-v3.99
PhilZ-cwm6-DXLR2-OLB-v3.99
PhilZ-cwm6-DXLR5-OLB-v3.99
PhilZ-cwm6-JPLPD-OJP-v3.99
PhilZ-cwm6-JPLR8-OJP-v3.99
PhilZ-cwm6-UBLPC-UUB-v3.99
PhilZ-cwm6-UBLR3-PSN-v3.99
PhilZ-cwm6-UBLR5-TCE-v3.99
PhilZ-cwm6-XXLPY-XEN-v3.99
PhilZ-cwm6-XXLQ3-OXX-v3.99
PhilZ-cwm6-XXLRG-DBT-v3.99
PhilZ-cwm6-XXLRI-AUT-v3.99
PhilZ-cwm6-XXLRK-XEU-v3.99
PhilZ-cwm6-XXLRL-HUI-v3.99 - Is this your kernel
PhilZ-cwm6-XXLRQ-DBT-v3.99
PhilZ-cwm6-XXLRT-DBT-v3.99
PhilZ-cwm6-XXLRU-VDI-v3.99
PhilZ-cwm6-XXLRW-SFR-v3.99
PhilZ-cwm6-ZSLPF-OZS-v3.99
PhilZ-cwm6-ZSLPM-OZS-v3.99
PhilZ-cwm6-ZSLPN-OZS-v3.99
Click to expand...
Click to collapse
andrew59it said:
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
Click to expand...
Click to collapse
Your phone is not booting since you flashed an ICS kernel over a JellyBean ROM
Android ICS version : 4.0.4
Android JB version : 4.1.2
so I hope you understand the difference.
You are lucky you didn't brick your device or have you already
But since you are able to go in download mode I think its not bricked yet.
It was probably a bad download which failed the installation so download ROM again and this time verify that your download is not corrupt by running it via md5 if provided.
also please provide the link of the ROM thread that you are trying to install so that I can understand better
and if you are not looking to flash a custom ROM or rooting your device in order to do so then in that case the steps are pretty straight forward
download Stock ROM
extract ROM
open Odin
select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC
put phone in download mode and connect
the bar should turn yellow once connected.
once connected click on flash
bar should turn green if successful
REVENGE SOLVES EVERYTHING
tysonraylee said:
Your phone is not booting since you flashed an ICS kernel over a JellyBean ROM
Android ICS version : 4.0.4
Android JB version : 4.1.2
so I hope you understand the difference.
You are lucky you didn't brick your device or have you already
But since you are able to go in download mode I think its not bricked yet.
It was probably a bad download which failed the installation so download ROM again and this time verify that your download is not corrupt by running it via md5 if provided.
also please provide the link of the ROM thread that you are trying to install so that I can understand better
and if you are not looking to flash a custom ROM or rooting your device in order to do so then in that case the steps are pretty straight forward
download Stock ROM
extract ROM
open Odin
select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC
put phone in download mode and connect
the bar should turn yellow once connected.
once connected click on flash
bar should turn green if successful
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Thanks everyone....
I think you hit the problem..... but my original ROM version was 4.0.4 .... (H3G)
Anyway probably something went wrong.... I don't need a custom ROM or to root the device.
I need to install N7000XXLT9_N7000ITVLT3_ITV if possible but the flash doesn't start via ODIN
May you explain step by step what have I to do? I really appreciate....
What do you mean "select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC" ?
md5 is not a single file? I read something about more files to place in odin.....
@ fusionero: I already downloaded the files.... also PHILZ XXLRL but the device doesn't start anyway.....
andrew59it said:
Thanks everyone....
I think you hit the problem..... but my original ROM version was 4.0.4 .... (H3G)
Anyway probably something went wrong.... I don't need a custom ROM or to root the device.
I need to install N7000XXLT9_N7000ITVLT3_ITV if possible but the flash doesn't start via ODIN
May you explain step by step what have I to do? I really appreciate....
What do you mean "select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC" ?
md5 is not a single file? I read something about more files to place in odin.....
@ fusionero: I already downloaded the files.... also PHILZ XXLRL but the device doesn't start anyway.....
Click to expand...
Click to collapse
Did you download the XXLT9 ROM?? or the ROM that you want to flash ??
if so then it should be a zip file, if you extract that zip file you should have 3 files in it (sometimes only PDA file is present and the other two i.e Modem and CSC are not present, dont worry the PDA file alone is enough)
Open Odin, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7000XXDLJ5_N7000ODDDLI7_INU.tar.md5 Select the one that looks similar to the ROM you downloaded)
and if there are CSC and Modem files then select them by clicking Phone and CSC in Odin accordingly. It will be mentioned in the file name if its a Modem or CSC file
if MODEM_XXXX.tar.md5 then select that file by clicking the PHONE in Odin and if XXXX_CSC_XX.tar.md5 then select it by clicking CSC in Odin
remember that you lose all your data
Then just click flash and it should flash
md5 is a single file and is used to check the integrity of the file you downloaded. Its just used to make sure that the file you downloaded doesnt have any errors or is corrupt. you use the .md5 file and compare it with the md5 of the ROM.zip If it matches then its not corrupted or is a bad download. (.tar.md5 and .md5 are different files as in .tar.md5 is a firmware file and .md5 is a hash file used for integrity check)
Just right-click the rar/zip file and select properties and select the "file hashes" tab and if you downloaded a .md5 open that file by clicking "compare file" in the same tab
.md5 is always provided along with file you downloaded and its size is always in kbs , if its not provided then you cant do the hash check
If you dont have "file hashes" tab after right-clicking and selecting properties of the rar/zip file then you should download and install HashTab to get that option
follow this video for a better understanding https://www.youtube.com/watch?v=Ulz-1UYzHBA
the process is same but you should use your ROM files i.e Italian N7000 files to flash your phone and yes Odin version doesnt matter, you can use any version
Hello
I downloaded N7000XXLT9_N7000ITVLT3_ITV.ZIP
Extracted the file into a folder and had N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 (there is also SS_DL.dll)
Tried to flash the md5 file with odin (V.1.85) , but odin returns a fail.....
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
andrew59it said:
Hello
I downloaded N7000XXLT9_N7000ITVLT3_ITV.ZIP
Extracted the file into a folder and had N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 (there is also SS_DL.dll)
Tried to flash the md5 file with odin (V.1.85) , but odin returns a fail.....
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
did you follow the video??
did you select N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 by clicking PDA??
REVENGE SOLVES EVERYTHING
Yes of course.....
andrew59it said:
Yes of course.....
Click to expand...
Click to collapse
still odin fails?? even after following the video??
are you using the original cable to flash ??
try plugging the cable into a different usb port and flash
Yes it fails
I will try with another cable and port. But if I flash Philz rom it works.....
andrew59it said:
Yes it fails
I will try with another cable and port. But if I flash Philz rom it works.....
Click to expand...
Click to collapse
after trying that try the solution from this post http://forum.xda-developers.com/showthread.php?p=41844601#post41844601
and also try and follow the thread as people have posted different solutions regarding your problem
Also this would be the extent of help i can provide
if that doesnt work i dont know what will
So please forgive me for not being able to help any further :angel:
maybe you should use odin3 v3.04 or v3.09.
usually i use odin3 v1.8X for multiple file roms but in your case, you have only One-file rom.
---------- Post added at 01:12 PM ---------- Previous post was at 01:09 PM ----------
besides, extract all the files in odin archive and place them in one folder dont just start the odin .exe file directly from the archive.
Hello changed the cable the port and ODIN (ver 3.04)
The same problem..... look at the picture attached....
I'm loosing hope.....:crying:
Thanks to all....
solved the problem!!! WOW! :good::victory:
The solution was to change pc, I went on my girlfriend laptop and everything went smooth as silk.....
Thank you all to supporting me !!
andrew59it said:
Thanks to all....
solved the problem!!! WOW! :good::victory:
The solution was to change pc, I went on my girlfriend laptop and everything went smooth as silk.....
Thank you all to supporting me !!
Click to expand...
Click to collapse
congrats
REVENGE SOLVES EVERYTHING
Mod edit: Thread closed as the threadowner removed the content of the opening post! Oswald Boelcke, Senior Moderator
Delete
Thanks @MarvinMod. Followed all the instructions to the letter and rooted my device with no problems.
Hello, I cannot get this to work.
I am stuck on this step:
***************************
4- On your PC open odin, click options and uncheck auto reboot, click Log, click AP, select the recovery.zip file, click start. Wait for Pass
***************************
Odin tries to upload the recovery.tar file (.tar, not .zip) but at the end it fails. Then I have to reboot the phone and wait, patiently, until it boots into Android, then, and only then can I try to switch it off, and all over again.
This is from Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 78 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> vbmeta.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Zilliman said:
Hello, I cannot get this to work.
I am stuck on this step:
***************************
4- On your PC open odin, click options and uncheck auto reboot, click Log, click AP, select the recovery.zip file, click start. Wait for Pass
***************************
Odin tries to upload the recovery.tar file (.tar, not .zip) but at the end it fails. Then I have to reboot the phone and wait, patiently, until it boots into Android, then, and only then can I try to switch it off, and all over again.
This is from Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 78 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> vbmeta.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you make sure oem unlock is checked in development options before booting to download mode and flashing recovery.tar with odin? (Step 2). You must boot to Android, check oem unlock then boot to download mode and flash. Is the bootloader unlocked? Check to make sure your using odin version i supplied under the tools link bottom of guide. Im not at my PC but the version that I know works is 3.13.3 or something close to that, ill confirm later when home.
Could you please help me by looking there - I think the phone is bricked...
Have I just bricked my faithful A70?
So I tried to install TWRP and followed the steps, used ODIN v3.14, it tried to upload something but failed with an error. Now the phone has gone into a perpetual restart cycle: 1) Reboot (by itself or Vol Down + Power) 2) Blank screen with...
forum.xda-developers.com
Zilliman said:
Could you please help me by looking there - I think the phone is bricked...
Have I just bricked my faithful A70?
So I tried to install TWRP and followed the steps, used ODIN v3.14, it tried to upload something but failed with an error. Now the phone has gone into a perpetual restart cycle: 1) Reboot (by itself or Vol Down + Power) 2) Blank screen with...
forum.xda-developers.com
Click to expand...
Click to collapse
You can't hard brick the A70 and sure thing. I posted a comment on your post you made. If its in a bootloop, hold vol up and down during the bootloop while connected to a PC till it boots to download mode. Then flash latest stock and reboot.
Also, you need odin version 3.13.3, youll find it in the tools link at bottom of guide.
Can't wait to do this.
Question though, what is the "Pass Safetynet"?
Damn.... does this mean i can not do this?
SuperDroid519 said:
Damn.... does this mean i can not do this?
Click to expand...
Click to collapse
As far as i know, the a705w in not unlockable but i dont have one so i cant do tests. Here is a thred that you could try but im not bent if you dont.
Root Samsung Galaxy A70 SM-A705W With Odin Tool - Root Droids
This Guide line provides instructions to root Samsung Galaxy A70 SM-A705W phone with Pictures. And we give you CF Root file, Oding program and Samsung Galaxy drivers as well you can find lot of solutions for rooting errors. From this CF root file, you can only root Samsung Galaxy A70 SM-A705W –...
www.rootdroids.com
SuperDroid519 said:
Can't wait to do this.
Question though, what is the "Pass Safetynet"?
Click to expand...
Click to collapse
Certification for google services and other apps that require a certified device.
Very helpful! Can you make another tutorial about how to debloat manually and which apps we'll should debloat? Thanks.
Fox-guy said:
Very helpful! Can you make another tutorial about how to debloat manually and which apps we'll should debloat? Thanks.
Click to expand...
Click to collapse
I will work on that.
Heads up, im retiring my A70 as i bought an S21 5G. This means I can do more flashing, testing and building on the A70 without the worry of loosing my daily driver in which my lifestyle requires. Im no expert so be patient please and don't expect a first release anytime soon.
hello! does it work with SM-A705MN ? thanks a lot!
HI,
so i follow your guide but stuck on install DFE. i complete flash twrp and sucessfully boot to it. But, it doen't recogin my internal store. and my pc not recogin my phone via twrp too. So i can't flash anything. ( i don't have SD card ). A way to fix it?
mrttd said:
HI,
so i follow your guide but stuck on install DFE. i complete flash twrp and sucessfully boot to it. But, it doen't recogin my internal store. and my pc not recogin my phone via twrp too. So i can't flash anything. ( i don't have SD card ). A way to fix it?
Click to expand...
Click to collapse
After install of twrp and boot to it, you need to format data... Click wipe, advanced wipe, format data, type yes then click blue check mark lower right corner. Reboot to recovery then you can flash DFE then format data again and reboot to system.
Perfect guide, simply, easy and working!
I faced a weird problem. My touch stopped working after installing TWRP, so I could not perform Step 6.
Solution to this: Connect an external mouse to your device via an OTG connector and use it as a pointing device to perform the rest of the steps on TWRP.
Cheers,
Amey
ameyanekar said:
I faced a weird problem. My touch stopped working after installing TWRP, so I could not perform Step 6.
Solution to this: Connect an external mouse to your device via an OTG connector and use it as a pointing device to perform the rest of the steps on TWRP.
Cheers,
Amey
Click to expand...
Click to collapse
That should not happen, is the device updated to latest Android and did you use twrp i provided or a different one?
MarvinMod said:
-WARNING-
THIS IS FOR THE SAMSUNG GALAXY A70 VARIANTS ONLY. THE INTERNAL STORAGE WILL BE WIPED AND DATA WILL BE LOST, PLEASE MAKE A BACKUP BEFORE CONTINUING. I AM NOT RESPOSIBLE FOR BRICKING, FOLLOW THIS GUIDE EXACTLY, DO NOT SKIP STEPS. You will need a Data/WiFi connection.
PC tools/files are linked at bottom of guide.
Unlocking the Bootloader
1- Make sure your connected to data or wi-fi. Open settings, Click about phone, Software Information, Keep tapping Build number till you see Developer options have been enabled message. Click back, back, Developer options, turn on oem unlocking, power off the device.
2- Press and hold vol up and vol down, Plug in usb cable from pc and let go when you see the WARNING screen, press and hold vol up till the unlock bootloader screen, press vol up for yes.
3- The device will now factory reset and reboot. congrats, you've unlocked the bootloader.
Custom Recovery (TWRP)
Recovery.tar-
recovery.tar | by MarvinMod for Galaxy a70
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
D.F.E.-
DFE.zip | by MarvinMod for Galaxy a70
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
1- Make sure you have updated your Device to the latest Android operating system Android 11 one UI 3.1 and use odin 3.13.3
2- Download Recovery.tar and D.F.E. listed above, ( Recovery has vbmeta packed in, so its just a single flash. ) Boot to Android and Make sure Developer options is enabled and oem unlock is toggled on.
3- Unplug from PC and Power off the device. Once powerd off, Hold vol up and vol down, Plug into PC, let go when you reach the bootloader warning screen and press vol up
4- On your PC open odin, click options and uncheck auto reboot, click Log, click AP, select the recovery.zip file, click start. Wait for Pass.
5- Press and hold vol down and power till the screen turns blank then immediately press and hold vol up. The device will reboot then land you in the twrp splash screen
6- Slide right to allow modifications, Click Wipe, Format Data, Type yes then click the blue check in lower left corner. Click back, back, Reboot, recovery
7- Slide right to allow, Connect to the PC and copy the D.F.E. file over. Click install, select the D.F.E file, slide right to confirm flash
8- Click back, back, wipe, Format Data, Type yes then click the blue check in lower left corner.
9- Click Reboot System and setup device. Congrats, you now have Custom Recovery TWRP.
Root with Magisk
Magisk v24.3-
Magisk-24.3(24300).zip | by MarvinMod for Galaxy a70
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
1- Unplug from PC and power off the device. Plug into PC and Device. When is starts charging, Press and hold vol up and power till the device boots. You should now be in TWRP
2- Slide right to modify, Copy Magisk v24.3 to Device, Click install, Select Magisk, Slide right to Flash, Click reboot to system.
3- Open you app drawer and wait for Magisk app to appear. Wala, your now Rooted with Magisk.
Passing Safety Net
Safetynetfix- https://androidfilehost.com/?fid=2981970449027573706
MagiskHideProps- https://androidfilehost.com/?fid=2981970449027573707
YASNAC- https://androidfilehost.com/?fid=2981970449027573708
1- Copy Safetynetfix, MagiskHideProps and YASNAC to Device
2- Open Magisk, Click setting, Enable Zygisk, Reboot
3- Open Magisk and click Modules, Install from storage, select safetynetfix, reboot
4- Open Magisk and click Modules, Install from storage, Select MagiskHideProps, reboot
5- Open File browser and install YASNAC App, Check Assertation for Safety net Pass.
Toolz
Downloads for : Samsung Galaxy a70 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Custom Roms
1- will add when an actual stable working Rom is available. 4/8/2022
Click to expand...
Click to collapse
Finally I have installed tWRP Recovery ...I just want to ask you a question ...If I want to go to tWRP recovery again, what combination key by pressing which I will go to tWRP recovery mode?