I am currently using lenovo A7000 which I bought from flipkart some months back.It was working fine without any problem until one day when I knew there was some problem.The device sometimes becomes irresponsive of touch and sometimes register fake touch or GHOST touch.The screen is intact without a scratch. I dont remember if it was the software update or some mishandling issue or some touch problem or any other thing that may responsible for this.I need some help how to resolve it.I am not much of a tech savy but can root/flash with the help of my friends. Suggestions/advice are welcome.
Related
Hi everybody,
Today I experinced a very strange problem with my Diamond (for the second time):
During a phone call ,suddenly the diamond shuts off and the only possible thing to do was a soft reset.
The on/off hardware button did not work.!!
Did anybody experience such serious problem ?
Thanks in advance
P.S :ROM 1.93 (coocked) and Radio 1.00.25.08
yes me too..
my htc TOUCH diamond is all working ok EXCEPT IT resets itself during making and receiving calls, at least once a day
and then i have to wait for it to boot up again
it is really embarasing for me as the people who i talk to think i purpofefuly hang up on them
i dont know what is the problem, i have good reception, (t-mobile - Macedonia)
everything else with my diamond is working flawlessly
but this auto reset during calls at least once a day, and sometimes the inability to answer incoming calls no response from the touchscreen
can someone advise me if anyone of you run into this problem sometime?
i am afraid if it is hardware because theyt are not good service technicians over here, i am afraid to give it to them, cause they will return it scratched or something worse. no good experience with repair sevices here.
as for the firmware i have the standard updated firmware from the htc site of july 2008
please advise any software solution?
and help will be greatly appreciated
best regards..
Jap, had the same problem (check my problem thread http://forum.xda-developers.com/showthread.php?t=424648 ), amongst others. I had o2 return it to HTC. This was 10 days ago. I'm still waiting for my repaired phone. As soon as I get it back and an error report is submitted to me I will let you know what was wrong. The problem is pretty serious and I doubt that it's just a software problem.
I assume the best thing to do is to return the phone
it will not be a new phone, returned from service
i paid 500 euros brand new for this device 2 weeks ago
and it started resetting itself during calls the second day i bought it..
Hello
I have a diamond htc rom 1.93.412.1ESN since I bought the unit come with serious problems with the display on the screen of alignment "Alinear pantalla" in system menu. Who here has or has the same problem, I already hard reset several times but not resolved, will defect in the unit? can you help me?
* Forgiveness by basic English, I am Chilean living in brazil
are you having a similar problem to this?
http://forum.xda-developers.com/showthread.php?t=438733
i've got the same problem.
When i align my screen it's ok buth 1 hr later when i put my stylus at the lower half of the screen its perfectly ok buth whe i put it at the top the presspoint is allways 1/2 a cm higher then my stylus.
so i have to do it several times a day
That is defect, I had that problem with my 2nd diamond. I tried several different ROM but the problem still there. So I returned it and get a replacement. My new one is perfect.
i had the same problem, i phoned htc who advised flashing with a orange uk, rom, then send to them if it didnt work
flashed it, same problem, so sent it in
just got an email, saying the warranty is void due to the rom being flashed
has anyone got a repair report for this issue
as my only recourse now is to get them to repair under the sales of goods act , as this is a hardware fault and their liability to fix
it is down to them to prove it was not inherantly faulty at the time of sale, but would like as much info as i can get to show that this is a hardware issue that has been experiance by other users
Hi i brought my lenovo mobile model a7000 last year from online from the website coolbuy.in , it was working well even after marshmallow update 4 months back. now all of a sudden the quarter left side the touch is not working which is very frustrating especially when typing or selecting buttons on the left side . no software updates were done recently, tried factory reset but no success, contacted coolbuy support, they advised to check for lenovo support or post in forums for advise. any help will be appreciated.
Same issue on right bottom side
Hello all!
So, I've been in love with all Xiaomi Products for a long time, my my phone is an OnePlus One and I can say that I'm not a newbie regarding this Android world.
Months ago I bought a Mi Pad 2 which had a strange behaviour with the screen, sometimes when I lock the screen, I couldn't unlock it. After spend an afternoon, flashing, reflashing and trying with different roms, I could fix it.
Yesterday I got my Mi5, It came perfectly on its box. After charging for a while (It came without charge) I tried to set it up. It came with Miui 7 International version, play store and play services already installed.
I notice a strange behaviour with the screen out of the box, it didn't respond very well and sometimes I couldn't unlock the screen. So I decide to Flash Miui 8 by following the Miui.com instructions but nothing changed, I'd said that I got worse.
Looks like the screen did not respond very well, after using a "touch screen test" app, I could see that the response was very poor, I barely could detect my 2 fingers and if I try to draw a line, I doesn't recognize all the movement that I'm doing in the screen.
Have you guys seems this before? Do you think it's a soft issue? For me it looks like a hardware issue, I already open a ticket with the support, but would be amazing if I could fix it by myself.
Btw, meantime I request to unlock my phone from mi.com/unlock but I don't want to touch the bootloader till I don't get an answer from support.
Thaaaaaank you!
Normally mi 5 doesnt have that issue, even i never heard that was a bug. So i guess it hardware issue, return it to your dealer
Sent from my MI 5 using Tapatalk
mi5 touchscreen problem
I have the same problem with the MI5 32GB i have buy it at December and from the start has some issues with the touchscreen but i try like you to change the ROM but the problem stay ...... so i don't know what need to do if its a software problem, but may this is a hardware and need to speak with the store i buy this device....
IF YOU HAVE FIND A SOLUTION PLEASE ANSWER ME
Thanks
Recently I replaced* my oneplus 3t screen as it was broken.
When asked in official service centres, the price was not affordable tbh as I could buy a new phone in it.
That is approx. 170+ USD.
So I went for a duplicate copy display.
The thing is I bricked my smartphone before, so I used the unbricking guide and installed everything from the MSM tool.
I am not sure whether the flickering is due to the display used, some problem in the digitizer or I have made some mistake in installing and its due to a software fault.
Please help me to find out whats the problem, if its the screen issue, I'll have to be accustomed with it and if not and there's some software fix, it would be great.
P.S: A noob here, sorry if this thread seems too lame but I required assistance.
If factory reset doesn't help, then it's a fault either in the new replacement screen or on the logic board of the phone. You didn't buy the cheapest replacement screen did you? These are usually second or third hand sorting with some quality flaws.
Skickat från min ONEPLUS A3003 via Tapatalk
Hey, I'm running into the same problem. I had my screen replaced and the screen would flicker as it turned on. The repair guy tried a bunch of different panels but no luck, the issue persisted. Did you figure out what's causing the screen to flicker? Is it a software issue or a hardware one?
same here, i don think that it's software because it's flickering (in my op3t) even in TWRP when screen have more to refresh like it's changing the background. now i'll backup phone then Factory reset, can someone tell me how to check what type of screen is mounted? aida64 doesnt tell me anything or i just cant find
Edit:
As expected nothing changed but it's on my Op3t YOURS can be different