Related
WHat is a good wireless charger for the Edge phone? I prefer not to alway connect with the cable......
Choetech has a few fast wireless chargers listed on Amazon.
1: Single Coil - Pad-type
2: Single Coil - Circle-type with Smart Lighting
3: 3 Coils - Pad-type with Smart Lighting
I was researching this yesterday. What you have to remember about wireless pads is that typically a 2.0 pad will charge similar to a Non fast Charge 2 plugin-in charger. So like a standard charger. Once 3.0 ones are out I assume it will be a similar scenario. Hopefully some day down the line they will be just as fast as their plugin counterparts.
As far as those links above, 10w max isn't very strong considering a plugin 3.0 is about 18w and even a 2.0 is 15w. So 10 watt seems pretty dinky for a wireless still. Still I guess better than the old 5 watt ones.
Tronsmart is making a fast charging capable qi charger which should be nice. I used to have a TYLT VU (angled qi charger) for my Nexus 6 that as great. I would buy an angled one because it's easier to see your phone on and impossible to not have it charge.
Sent from my Nexus 6P using XDA Labs
xgman said:
As far as those links above, 10w max isn't very strong considering a plugin 3.0 is about 18w and even a 2.0 is 15w. So 10 watt seems pretty dinky for a wireless still. Still I guess better than the old 5 watt ones.
Click to expand...
Click to collapse
After some more digging I found this: Nekteck Wireless Charging Pad (18w QC 2.0 Adaptive)
Looks very promising; 18w, slightly tilted instead of laying down flat, smart lighting.
Bjray said:
After some more digging I found this: Nekteck Wireless Charging Pad (18w QC 2.0 Adaptive)
Looks very promising; 18w, slightly tilted instead of laying down flat, smart lighting.
Click to expand...
Click to collapse
It does look nice, but it is just the pad, correct, you still need to use your own samsung charger?
ScottBroker said:
It does look nice, but it is just the pad, correct, you still need to use your own samsung charger?
Click to expand...
Click to collapse
Correct. You can also buy a "QC 2.0 Adaptive Fast Charger" like this.
please use the Samsung original or certified third-party 18W QC 2.0 adapter as its power source.
Already got one on order so maybe will get this too. Keep in mind that still this will NOT charge as fast as a 3.0 18w direct plug. Not sure why that ends up being the case, but that is what I have read.
BUT::: Lower down on the order page it say:
"Fast Charge Model(10W Output Max) ONLY "
So does that mean if you have an 18w source it still only delivers 10w to the phone? Seems hardly worth it. I sent them an inquiry about this. (it's not listed on their website)
Bjray said:
After some more digging I found this: Nekteck Wireless Charging Pad (18w QC 2.0 Adaptive)
Looks very promising; 18w, slightly tilted instead of laying down flat, smart lighting.
Click to expand...
Click to collapse
I received that charger 3 days ago.
I can not test it on the S7 just yet of course, however I have tested it on other phones and it does charge faster than a standard Qi wireless charger does.
I will post up some information about this charger, and the Cheotech 10w circle fast charger that I have also, as soon as the phones arrive.
xgman said:
please use the Samsung original or certified third-party 18W QC 2.0 adapter as its power source.
Already got one on order so maybe will get this too. Keep in mind that still this will NOT charge as fast as a 3.0 18w direct plug. Not sure why that ends up being the case, but that is what I have read.
BUT::: Lower down on the order page it say:
"Fast Charge Model(10W Output Max) ONLY "
So does that mean if you have an 18w source it still only delivers 10w to the phone? Seems hardly worth it. I sent them an inquiry about this. (it's not listed on their website)
Click to expand...
Click to collapse
A lot of energy is lot due to inefficiencies as heat while charging.
Sent from my Nexus 6P using XDA Labs
Milimbar said:
I received that charger 3 days ago.
I can not test it on the S7 just yet of course, however I have tested it on other phones and it does charge faster than a standard Qi wireless charger does.
I will post up some information about this charger, and the Cheotech 10w circle fast charger that I have also, as soon as the phones arrive.
Click to expand...
Click to collapse
if you could do a compare with the plug-in 2.0 charger, that would be great.
Hi guys, I'm new to wireless charging, and I'm a bit confused as to which wireless fast charger I should buy for the S7...is there anything different about the wireless charging on the S7 than the S6, Note 5, etc.? Are there new chargers coming out soon that are somehow better than the ones currently on the market? I'm just wondering which charging pads would give me the fastest charge. If anyone could shed some light on this for me, that'd be helpful
Here is what i got for our Note 5's, my wife and I both have one. They have worked great so far. You need to use your Samsung fast charging adapter with it. For $19.99 I could not be happier.
http://smile.amazon.com/gp/product/B015XF17VM?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
kxhaz said:
Here is what i got for our Note 5's, my wife and I both have one. They have worked great so far. You need to use your Samsung fast charging adapter with it. For $19.99 I could not be happier.
http://smile.amazon.com/gp/product/B015XF17VM?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
Click to expand...
Click to collapse
These so called fast charge wireless models are all over the place with specs. I'd wait for the newer crop to be out and tested.
My Choetech fast wireless charging pad still works great so far. I will recommend Cho
jtw_111 said:
Hi guys, I'm new to wireless charging, and I'm a bit confused as to which wireless fast charger I should buy for the S7...is there anything different about the wireless charging on the S7 than the S6, Note 5, etc.? Are there new chargers coming out soon that are somehow better than the ones currently on the market? I'm just wondering which charging pads would give me the fastest charge. If anyone could shed some light on this for me, that'd be helpful
Click to expand...
Click to collapse
My Choetech fast wireless charging pad still works great so far. I will recommend Choetech. Very stable and warm slightly. They have many kinds of wireless chargers, which has lots of good feedbacks on Amazon. :good:
Well now that there is a report that the s7 and s7e do not support quick charge 3.0 (sad) I'm not sure what's what.
I have this one: www.amazon.com/Wireless-Charging-Pad-CHOE-Qi-Enabled-Adaptive/dp/B016DAFUGY
Works REALLY well for me, charges a lot faster than the old Nokia DT-900 pads I have scattered around the house. Choetech is sending me their newest model to test, so I'll have a writeup for it here soon. Maybe a week or so?
entropism said:
I have this one: www.amazon.com/Wireless-Charging-Pad-CHOE-Qi-Enabled-Adaptive/dp/B016DAFUGY
Works REALLY well for me, charges a lot faster than the old Nokia DT-900 pads I have scattered around the house. Choetech is sending me their newest model to test, so I'll have a writeup for it here soon. Maybe a week or so?
Click to expand...
Click to collapse
That looks like a good one. I have a pad already, If I use one of the new power supplies will the charge fast, or need to upgrade the pad????
You'll need to use a Quickcharge 2.0 plug, to have it fast charge. It's not going to go any faster if you use a QC 3.0 unit though.
This is what I have now
One of the big concerns I had with the proprietary Dash Charging system is whether I'd be able to use previously purchased power banks.
I've been testing my OP3 with the RAVPower 26800mAh powerbank along with the Anker USB-C to USB 2.0 cable.
The powerbank is capable of outputting 2.4a, which produces a quick charge on other devices.
On the OP3, I get between 30 and 57% charge / h (measured using the Battery Monitor Widget app), which is acceptable to me.
It's not Dash Charging speed, but it'll work in case you were wondering.
MI Charger
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
quote from Android central
"For the first time, OnePlus is including a fast charging system on the OnePlus 3. Rather than go with another standard like Qualcomm's Quick Charge, OnePlus made its own "Dash Charge" system. Dash Charge promises a 60% charge on your OnePlus 3 in just 30 minutes, which is just as fast as any other system — the only catch here is you'll have to use the Dash Charger in the box and the included cable.
Your OnePlus 3 will charge just fine off of other chargers — whether they're Quick Charge 3.0, Nexus Rapid Charge or something else — but you just won't get Dash Charge speeds."
I have the oneplus power bank, I'll see how it charges using the cable that came with the phone.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Royaledevil said:
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
Click to expand...
Click to collapse
Seemed like a good choice as outputting 3.6A would be good enough for me. Would you be able to point me a link where to purchase it from? Many thanks.
are you sure the 3.6a isnt a maximum of all the ports on the bank?
usually if they have multiple ports they say a maximum load for all being X, but I've only ever seen a maximum amperage of 2.4a on a port (few and far between) most 2.1a as stated per port.
even then they charge my OP3 at 1.2a using oneplus's cable, same as my s5 beforehand.
there is a great app on the store called Ampere which tells you your current charging/discharging amps
superbrowndude said:
I have the oneplus power bank, I'll see how it charges using the cable that came with the phone.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
and ?? whats the verdict ?
It's never going to charge faster then 2amp on any ordinary charger or battery pack
If you want fast charging u need to use a dash charger
Sent from my ONEPLUS A3000 using XDA Free mobile app
Royaledevil said:
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
Click to expand...
Click to collapse
Link to that powerbank please
Framedtrash said:
It's never going to charge faster then 2amp on any ordinary charger or battery pack
If you want fast charging u need to use a dash charger
Click to expand...
Click to collapse
Check my post on another thread,
You can use OPPO VOOC Powerbank,
It charge as fast as at least 3.5A
It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger
Sent from my iPhone 4S using XDA Free Mobile App
Hastaloego said:
and ?? whats the verdict ?
Click to expand...
Click to collapse
Same question, if he doesn't answer. I'm gonna have to test it out when I get my OnePlus 3 package. On 23rd September. @superbrowndude please give us result
Framedtrash said:
It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger
Sent from my iPhone 4S using XDA Free Mobile App
Click to expand...
Click to collapse
No offense but this is a flawed theory, did you forget what site you're on? That's what development is for, to boldy go where no one has gone before, so contrary to your belief, I'm sure its possible, can and will happen.
OP3 is only able to charge at 1.5A max with everything except the dash charger and cable, from my tests.
BoiBundy said:
No offense but this is a flawed theory, did you forget what site you're on? That's what development is for, to boldy go where no one has gone before, so contrary to your belief, I'm sure its possible, can and will happen.
Click to expand...
Click to collapse
No it is not a flawed theory. The phone does not have the quick charging components in the phone but instead in the charger and cable. Only VOOC and DASH chargers will quick charge this phone. It's not theory it's fact. Anyways fast charging does deteriorate the battery a bit faster than normal charging so it's not good to use it all the time
crzykiller said:
No it is not a flawed theory. The phone does not have the quick charging components in the phone but instead in the charger and cable. Only VOOC and DASH chargers will quick charge this phone. It's not theory it's fact. Anyways fast charging does deteriorate the battery a bit faster than normal charging so it's not good to use it all the time
Click to expand...
Click to collapse
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
What's the easiest way to test what amperage a non-Dash charger is charging at? I'm curious to know if some of my Quick Charge adapters will provide 2.4A. I've only done a very brief test with my QC3 car charger, but it gave me 3% in about 4 minutes. That's about what I was getting on a QC2.0 phone, and that's perfectly acceptable in my books.
BoiBundy said:
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
Click to expand...
Click to collapse
Huh? that's my first comment lol and VOOC and DASH are exactly the same technology and have their specific patent. As far as I know, it will only charge with those specific chargers since it is not only the charging brick holding some proprietary charging solution but also the cable. I have a USB-C cable that can withstand over 4A but will not work even when plugged to the DASH charger. Now yes there may be a charger that quick charges this phone but it'd be very unlikely that it does exist since the cable and brick would have to have the exact specifications as the DASH/VOOC chargers.
BoiBundy said:
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
Click to expand...
Click to collapse
Haha
As stated VOOC and DASH are the exact same thing, VOOC was created by OPPO and the rebranded by oneplus
No amount of software is going to change a hardware limitation
I guess your going to tell me that a dev is going to release a software patch that restores the headphone jack on a iPhone
Download ampere from the playstore if you want to get a rough idea of what your device is charging at
Sent from my iPhone 4S using XDA Free Mobile App
fp1707 said:
Same question, if he doesn't answer. I'm gonna have to test it out when I get my OnePlus 3 package. On 23rd September. @superbrowndude please give us result
Click to expand...
Click to collapse
Same question. Really interested in the Oneplus Power Bank charging results. Please.
Everything I can find says that the only way we can "quick" charge is with the official OP Dash charger?
anything else we use will only do normal/slow charge?
As far as I know, this is correct. Dash Charge and Quick Charge are entirely different technologies that are used to accomplish a similar goal.
I believe that you can still use the QC charger, but as a normal charger. Just like Dash Charger when plug other phone in, it just turn into normal charger. But there is a potential problem here, Dash Charge works by pumping a lot of amps and keep the voltage the same, while Quick Charge doing it vise-versa, and QC is a technology develop by Qualcomm, meaning the SoC itself in the OP3/3T would support it, it just the rest of the hardware do not. If for whatever reason, the QC charger still provide more voltage than 5V, it could damage the phone. I don't know what is the max voltage the 3T can take before it get damage. If you want an official answer, get it from OP.
USB C plugs will work from what I've read, but nothing will quick charge but the Dash chargers--just normal chargers. Which is fine for me honestly, I use a regular charger at home (overnight) and keep the dash charger with me for work/etc where I need to pump juice faster.
That's dumb....I was hoping for quick charge 3.0 support plus dash charging. GAH! I might get a dash car charger then....I use my phone a lot. I like being able to charge fast while I use GPS. I use GPS a ton. And my new portable charger....QC 3.0.... That part of it is useless now.... grrrrr, but is this verified?
Maybe we all should contact Anker, and ask for Dash Charge support. What I very want is the multi ports car charger with at least one Dash Charge. But such charger do not exist anywhere.
someone0 said:
Maybe we all should contact Anker, and ask for Dash Charge support. What I very want is the multi ports car charger with at least one Dash Charge. But such charger do not exist anywhere.
Click to expand...
Click to collapse
Would love to see some 3rd party support.. in principle the idea of moving this function outside the phone seems appealing... but I hate only having 1 vendor to buy from... and I'm not even clear.. can I use the Dash charger to charge my non-OP devices? (ie. reducing the # of gizmos I have to travel with).
zim2dive said:
Would love to see some 3rd party support.. in principle the idea of moving this function outside the phone seems appealing... but I hate only having 1 vendor to buy from... and I'm not even clear.. can I use the Dash charger to charge my non-OP devices? (ie. reducing the # of gizmos I have to travel with).
Click to expand...
Click to collapse
Yes but it won't "dash" charge them.
I asked the same sort of question here: http://forum.xda-developers.com/showpost.php?p=69856748&postcount=5
I've been using an anker QC 3.0 charger on the OP3T and it charges fine.
it doesn't get hot, doesn't say it's fast charging but it seems to charge at a reasonable rate nonetheless.
jpfx said:
I've been using an anker QC 3.0 charger on the OP3T and it charges fine.
it doesn't get hot, doesn't say it's fast charging but it seems to charge at a reasonable rate nonetheless.
Click to expand...
Click to collapse
Thanks for that.
I'm interested in knowing if the voltage/amps/whatever are going to mess with the OPO battery that's not rated for the Q3.0.
Does anyone know if USB-PD charging would on the 3T? I ask this because as a nexus 6P user i have a number of charging accessories, and USB-PD is baked into the USB-C standard. So logic would dictate assuming the 3T conforms to the standard it should be able to charge at 5V 3A, which would be slower than dash charge, but quicker than the average charger.
Have a good one!
I have a 7 port anker usb3 hub that has 2 charging ports and a 2amp 12v wall wart. It charges just as fast as the OP3T charger. Full charge from 50% after work in under an hour.
Sent from my ONEPLUS A3000 using Tapatalk
This is something i haven't seen mentioned or confirmed in all the reviews i have read. I have read reviews of other xiaomi devices that said it was qc 3.0 enabled, but the charger that ships with the phone is not a quick charger and the user would have to buy their own to take advantage of this feature.
so does anyone know if the charger we receive with the mix is in fact a quick charger as the mi mix is on the devices that is qualcomm quick charge 3.0 enabled.
knives of ice said:
This is something i haven't seen mentioned or confirmed in all the reviews i have read. I have read reviews of other xiaomi devices that said it was qc 3.0 enabled, but the charger that ships with the phone is not a quick charger and the user would have to buy their own to take advantage of this feature.
so does anyone know if the charger we receive with the mix is in fact a quick charger as the mi mix is on the devices that is qualcomm quick charge 3.0 enabled.
Click to expand...
Click to collapse
Check features: http://www.gsmarena.com/xiaomi_mi_mix-8400.php
That site quoted 83% in 30mins, I am not getting that, not even close. I bought the anker USB C quick charge charger which suppose to be quick. I don't feel quick at all...
Anyone also bought charger that can comment on this?
audscott said:
Check features: http://www.gsmarena.com/xiaomi_mi_mix-8400.php
Click to expand...
Click to collapse
yes, as i posted i am well aware the phone is quick charge 3.0 capable. my question though is the charger that ships with the phone a quick charge charger. there are other xiaomi phones that are also quick charge but the user has to provide their own quick charger.
if i were to guess i do not think this charger is a quick charger based on my results compared to my nexus 6.
wu5262 said:
That site quoted 83% in 30mins, I am not getting that, not even close. I bought the anker USB C quick charge charger which suppose to be quick. I don't feel quick at all...
Anyone also bought charger that can comment on this?
Click to expand...
Click to collapse
I got an Aukey QC3 5-Port Charger.
I'm trying to get my device empty right now (tough though as it lasts pretty long) and will test it afterwards.
Gesendet von meinem MIX mit Tapatalk
I compared the included charger with my Anker quick charge 3 charger using the Ampere app.
The given stats were marginally better with the included charger.
I'm not really sure what all the figures mean but they were there or there abouts the same, the Anker charger is Qualcom QC3 certified.
Not nearly getting the quoted charge times though with either charger.
At 53% it claimed 44 mins to 100%
Yes, it ships with a fast charger. It delivers:
5V - 2.5A (12,5W)
9V - 2A (18W)
12V - 1.5A (18W)
So yes, it's a QC2.0 fast charger.
I'm currently at 69% and on the normal charger it's 3 hours+, on the QC2.0 charger I have, it's 1.5 hours and it gave me the same for the included charger. Kind of disappointed that it's only 2.0.
after seeing how insane the battery life is on this phone i just went with the qi wireless charging usb C adapter and I have no plans on going back, works awesome.
knives of ice said:
after seeing how insane the battery life is on this phone i just went with the qi wireless charging usb C adapter and I have no plans on going back, works awesome.
Click to expand...
Click to collapse
Which one? Link?
Thugsin313 said:
Which one? Link?
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B01M11UT3V/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1
with a case you don't even know it is there.
Thx for the Link:good:
Yes BUT!!!... lol
knives of ice said:
after seeing how insane the battery life is on this phone i just went with the qi wireless charging usb C adapter and I have no plans on going back, works awesome.
Click to expand...
Click to collapse
What I dislike, and you can't use is the Wireless Charging with your phone and case, and a metal plate stuck to the back of the phone. You see, I really like the various magnetic holders in the car (I have one that works with the CD Slot of the vehicle to mount the holder, another that is a little ball mount that sticks to any flat service). They use a thin metal plate to mount to the back of the phone case, and the magnetic is part of the phone mount that is in the vehicle. If you place the phone with the holder and the metal plate on the wireless charger base, it will overheat both the charging base and the phone.
I REALLY like the magnetic phone mount, and do like wireless charging but it a moot point if you have a mounting plate on the back of your phone or case.
I am using amperage and I own two qualcom version 2.0 chargers one from my Nexus 6, and one I bought on amazon. The OEM Nexus 6 draws about 1.6amps on charge, and the Anker 2.0 draws under 300 mAH. The computer 3.0 USB port from a desktop draws 370mAH to charge the phone.
I will probably invest in a true oem qualcom 3.0 charger.
Pretty cheap of Shomi to not include a 3.0 charger
LormaD said:
What I dislike, and you can't use is the Wireless Charging with your phone and case, and a metal plate stuck to the back of the phone. You see, I really like the various magnetic holders in the car (I have one that works with the CD Slot of the vehicle to mount the holder, another that is a little ball mount that sticks to any flat service). They use a thin metal plate to mount to the back of the phone case, and the magnetic is part of the phone mount that is in the vehicle. If you place the phone with the holder and the metal plate on the wireless charger base, it will overheat both the charging base and the phone.
I REALLY like the magnetic phone mount, and do like wireless charging but it a moot point if you have a mounting plate on the back of your phone or case.
I am using amperage and I own two qualcom version 2.0 chargers one from my Nexus 6, and one I bought on amazon. The OEM Nexus 6 draws about 1.6amps on charge, and the Anker 2.0 draws under 300 mAH. The computer 3.0 USB port from a desktop draws 370mAH to charge the phone.
I will probably invest in a true oem qualcom 3.0 charger.
Pretty cheap of Shomi to not include a 3.0 charger
Click to expand...
Click to collapse
get a Pioneer Appradio that mirrors your phones screen and problem solved. now that i'm so used to it i can't imagine my phone's screen not being the screen of the head unit in my car everything is right there makes it so much easier
LormaD said:
I am using amperage and I own two qualcom version 2.0 chargers one from my Nexus 6, and one I bought on amazon. The OEM Nexus 6 draws about 1.6amps on charge, and the Anker 2.0 draws under 300 mAH. The computer 3.0 USB port from a desktop draws 370mAH to charge the phone.
I will probably invest in a true oem qualcom 3.0 charger.
Pretty cheap of Shomi to not include a 3.0 charger
Click to expand...
Click to collapse
I'm revising my previous post, it seems that the provided charger may indeed be a QC 3.0.
I've been reading that if you use USB-c to USB-c cable instead of the provided USB-a to USB-c cable, you actually get charge rate.
I've also been reading up on the QC 3.0 vs 2.0. Both will max out at 18watts. But 3.0 has a variable voltage whereas 2.0 is fixed at 5V, 9V and 12V. You can see that in the below link, there's a nice table of Watts for each QC.
http://www.androidauthority.com/quick-charge-3-0-explained-643053/
However with USB-C to USB-C, it can charge at full 29Watts. That's a huge difference.
you can see that in the description provided by Anker here
https://www.amazon.com/Anker-Type-C-Delivery-Charger-PowerPort/dp/B01D8C6ULO
You can also see here in this device
https://www.amazon.com/Lumsing-Charge-Charger-Foldable-Macbook/dp/B01I1OIO4A
it says 48W of power, and allocates 19W for QC 3.0 which means the other Type-C port is allocated for 29Watts.
So I think I'm going to be looking for something with a direct USB-C port as a charger.
Certainly, this may be all for not if the Xiaomi Mi Mix is limited to 18W of input anyways.
I have the Anker USB-C to USB-C charger, my initial testing indicate that the original charger (China Plug) and my Samsung Galaxy S6 Edge charger (UK Plug) are capable of doing 23.8 Watts max, i tried to monitor the difference and what I noticed is the Mi Mix original charger seems to be adjusting the charging power more often (not really sure why and whether it's good). My Anker USB-C to USB-C went up to 28.9 Watts Max. All chargers seems to scale down their charging rate after battery reach 80%+ so I think the best way to test is to empty the better and start from 0%. I doubt I will be doing that test though as it's quite hard to empty battery on Mix and I am pretty happy with my Anker charger so don't think I will be using Stock one or my Samsung one.
Unless I go on holiday with multiple devices that still use old USB port, Anker USB-C to USB-C is my go to charger.
So I think what you confirmed was that the mix can take power at 29 watts.
That's good to know.
Just received this wireless charging receiver today that claims to do fast charge
https://www.amazon.com/gp/product/B01LX0Y5CS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
it does charge much faster, almost double of the one i posted originally in this thread. i'm getting a charge on it around 950ma which isn't too bad for wireless i don't think.
Is there an app I can use to see if this phone is quick charging ? I have a Google pixel charger USB c to USB c. Trying that out now .I can't really judge because this phone is at least 1000 mAh bigger than what I'm used to lol.
LaNsLyDe said:
Is there an app I can use to see if this phone is quick charging ? I have a Google pixel charger USB c to USB c. Trying that out now .I can't really judge because this phone is at least 1000 mAh bigger than what I'm used to lol.
Click to expand...
Click to collapse
That's what I'm using too! I was at 24% battery, went to sleep for 4 hours with it charging, and I'm only at 74%. There has to be a way to know when we quick charge lol
I have an old quick charge 2.0 car and wall charger. I know they won't work with dash but I'm just double checking to make sure they're safe and won't damage my OP3T. Seeing as how the phone accepts 4a (I think) I'm pretty sure 2.4 in will be fine. Thanks in advance!
same Q, I have a QC 2.0 and normal charger, not sure if putting 2.0 or normal charge apart from the dash charge?
It's be ok to use lower rated charger (lower amperes). Any charger that is rated 4.0A and below should be fine. The most important thing is your usb cable should support the amps it is transferring. Make sure they are rated 2.0A and above.
supersomething said:
It's be ok to use lower rated charger (lower amperes). Any charger that is rated 4.0A and below should be fine. The most important thing is your usb cable should support the amps it is transferring. Make sure they are rated 2.0A and above.
Click to expand...
Click to collapse
What if it's not? Because I'm using Aukey 2.0 but I don't use embedded cable from them, just a regular Chinese one, but I still see the speed maintains. Is it going to be damaged?
rockmaster said:
What if it's not? Because I'm using Aukey 2.0 but I don't use embedded cable from them, just a regular Chinese one, but I still see the speed maintains. Is it going to be damaged?
Click to expand...
Click to collapse
If I am not mistaken, most of the newer usb cables are rated at 2.1-2.4A for charging. But if you want to be safe I would suggest you take notice of what the cables are rated at. For me personally, I always follow the rules of not using lower rated cables on higher rated input.
Any high quality charger will work just fine with OnePlus, although Dash Charge will turn on ONLY will OnePlus/OPPO dash charger and official USB cable. So you are limited to lower (non dash charge) speed.
QC 1/2/3, Turbo charge, Super charge, Dash charge.. adapters are safe to use with any phone, fast charging will not engage if the phone doesnt support it.
I recommend checking this spreadsheet: https://docs.google.com/spreadsheets/d/1wJwqv3rTNmORXz-XJsQaXK1dl8I91V4-eP_sfNVNzbA/edit#gid=0
Cool beans, sounds like I'm good to go. I'm using whatever cable the charger came with and a USB C adapter from Aukey. Works just fine! Not really too concerned about dash charge since it's sitting bedside or in the car for road trips. Thanks!
so just curious if i use a regular quick charge charger it will charge but at lower rate then dash charge
karthics4 said:
so just curious if i use a regular quick charge charger it will charge but at lower rate then dash charge
Click to expand...
Click to collapse
Yep. The only way to get dash charge is to have a dash charger and a OPO cable. They do the conversion in the charger and push 4a to the phone vs quick charge which depends on the phone to do the step up. You'll basically be charging at 2.4a or whatever your quick charge puts out.
I use my 6 ft Nexus 6P charger as my primary and in my car I have my iOrange cable with a Maxboost 2.0 & 2.4 car charger
Sent from my ONEPLUS A3000 using Tapatalk
trentonite said:
Yep. The only way to get dash charge is to have a dash charger and a OPO cable. They do the conversion in the charger and push 4a to the phone vs quick charge which depends on the phone to do the step up. You'll basically be charging at 2.4a or whatever your quick charge puts out.
Click to expand...
Click to collapse
Thanks so much, had been w android for years, might go otherside and get iphone as i see a lot at work. i just feel left out. but then i think of the deadly iphone not charging due to 3rd party cable mesage which pops up and then wanna stay w andorid