Hello!
Recently flashed Dr.Ketan ROM, with the TWRP recovery, Was working perfectly, up until it rebooted. Now, I get a message in the top left corner saying that 'custom binary blocked by FRP lock' and the phone shuts down. and I'm getting the same message even if I try to boot into recovery. I tried Flashing new ROM through odin, but I'm unable to do so, as I'm getting a message on phone saying 'sw rev check fail device 2 binary 1'. I'm pretty clueless and stuck. Please, Please help me out. I've spent hours and I'm still nowhere close to getting it back running. My model is SM-N920G.
This is the message I get on Odin.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Re download the stock rom. You needed to turn on oem unlock
Related
Hi all,
Samsung Galaxy S3 - GT-I9305. After the OS patch was getting a few issues like system randomly resting, security block popups on some apps when there never was before. One night however woke up and the phone was powered down. Now only powers up only into Samsung Logo bootloop. Cant enter recovery mode, just goes into the loop. I've got 2 ROMs from SAM mobile for my carrier, one older and one recent, as i'm unsure what my ROM is and cant check it now. Both however fail with Odin. Log listing below.
Have tried different ports, using original cable. Ideally would like to get my data back as pictures and contacts were not backed up.... Please help! Pretty desperate and haven't really found anything in forums for this situation.
Odin logs;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
TWRP
Hello and thank you for using Q/A,
can you please try flashing TWRP via AP:
twrp-2.8.7.0-i9305.img.tar
And then please try to boot into TWRP using the known combination. Tell me, if your I9305 is booting into TWRP then.
Regards
Trafalgar Square
Thanks for reply. I tried on Odin3 1.87 and 3.10.7 both fail; log
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Option selected auto reboot via AP.
:crying:
Any other suggestions?
The thread is dead, but in case anyone is coming across the same sort of problem.. i bit the bullet and took it to a service tech. They couldn't fix it and had to replace the motherboard. So unfortunately that was the solution for me anyway. :crying:
I tried rooting a Note 4 (N910T that came with 5.1.1) following the easy steps pinned in the general section. I was able to install the recovery but Something failed after the CF root script. Because I got stuck in a boot loop. I then wiped the cache partition and tried rebooting. The same issue persists. So I downloaded the stock firmware (N910TUVU2DOK2_N910TTMB2DOK2_TMB) and tried flashing that in Odin 3.10.7. During the process I received.
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After that, I'm no longer able to boot into TWRP recovery. I get a message about a failed firmware update nor does the OS boot up.
I can still boot into download mode. And I'm able to flash TWRP from ODIN. Although after booting into TWRP and trying to do a wipe. It complains that' it's unable to mount the /system partition.
Could Someone give me a quick hand? I work in IT and I know how to google. So there shouldn't be much hand holding. Thanks in advance.
It was the damn cable. Either the cable or the usb port. I switched both at the same time. The cable I was using was an "OEM" from amazon. That I used to back up the device and flash the recovery. But for some reason it would fail at the step above.
After I swapped to my real OEM usb cable, I was able to flash the rom I was able to.
Not sure I want to try the root again. Anyone have solid instructions on rooting 5.1.1 on the N910T?
I have a sprint galaxy note 5. I accidently formatted in twrp. Since then its' stuck here ( NOTE: I WAS ON 5.1.1 AND I'M TRYING TO FLASH 6.0.1 I HAVE THE 6.0 TWRP THAT IS REQUIRED)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
Click to expand...
Click to collapse
Anyone have any ideas at all? I have no way to get a replacement until next week so I'm gonna do what I can to get this working. Any additional info can be provided
what I've tried:
different ROM ( could be using the wrong one)
N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5
N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5
ALL_SPT_N920PVPU2BPC3_N920PSPT2BPC3_CL7231607_QB8832851_REV00_user_low_ship.tar.md5
all of these have the same problem. I am starting with a clean phone pretty much. system 0 bytes data 0 bytes
I have noticed that /system won't mount in TWRP when trying to repair the directory possibly this has something to do with it
Any advice at all is welcome. I have no clue where to go from here
EDIT: Just tried a new usb port and it worked after 7 hours of trying over and over
I would try to get my hands on an updated stock rom bundled with boot image and kernel and try that with odin. Also be sure you are using the right Odin.
im trying to get back to adnroid 6.0 but after odin progress bar is about to complete i get failed, message, i have used smart switch and can easily flash to newest version of android but i don''t want 7.0 i need 6.0 so i can run the tablet as android 6.0 , need help thanks
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
xiexieni778 said:
im trying to get back to adnroid 6.0 but after odin progress bar is about to complete i get failed, message, i have used smart switch and can easily flash to newest version of android but i don''t want 7.0 i need 6.0 so i can run the tablet as android 6.0 , need help thanks
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to flash latest 6 rom for your region to succeed , more information would be more useful such as what's your region , did you officially upgraded to 7 using ota update or manually
messi2050 said:
You need to flash latest 6 rom for your region to succeed , more information would be more useful such as what's your region , did you officially upgraded to 7 using ota update or manually
Click to expand...
Click to collapse
got this finally to work, damn there was a flaw in the file i download sammobile , since i cant resume downloads sometimes the file just ends a little earlier
I have a Note 5 SM-N920T and I had it rooted with Magisk. It was working great until I needed to remove the root. I tried to flash a stock firmware I found online and it failed giving me the error "sw rev. check fail. device 4 binary 2". I then forced my phone to reboot (power + vol down) and got back in download mode. I downloaded a newer version of the Note 5 firmware from Updato and flashed it. This time it passed in Odin but would never boot into android, instead, it would get stuck on the T-Mobile splash screen. Another weird thing I noticed is that the blue led will not shut off no matter what. Even when the phone is completely off and unplugged the led remains on. I need to get back to the original ROM/firmware but I can't do it. All help would be greatly appreciated as I have been unable to find anything so far after countless hours of scouring the internet. Until this issue is resolved I am without a phone so as mentioned above any and all help is greatly appreciated.
Odin Log when the error occurs:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!