I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery
Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....
send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.
I have spent about 10 hours sitting here, with over 200 tab open trying to find a solution to my problems but I could not find one. My last option is to post here and hope someone can help me out.
I recently bought the tf701t which came with Android 4.2.2. Everything worked fine. A few days ago, I got pushed an update to android 4.3 but it was .1.7 not .1.18 (the newest apparently). With that update, my problems came. When I light up the device by pressing the power button, the lock screen was unresponsive. I pressed my pin numbers in but there was no response and it was as if the touchscreen was broken. However, the home and back button were all working fine. I had to randomly keep pressing until it finally started becoming responsive. When I got in, the quick management window (the one you get by swiping down), kept popping up the moment i press the screen. Because of this, I couldnt do anything. I couldn't even turn off the tablet as the power off option was unable to be pressed by me (When i did press, the window came up again).
After a while, i managed to get around this by again randomly pressing stuff. I got really frustrated and decided maybe if I install a custom rom, this problem might be fixed.
I read around a bit and found that the CROMix rom required firmware 1.18, which I did not have. Because of this, i decided to try install 1.18. First i used the asus unlock tool. Next I tried booting into recovery but here I met my problem. I have guides telling me to first boot using power button + volume down key. This worked. It then told me to choose the RCK option and press the volume up key. This however, did not work. When I selected the RCK option, the android figure appeared lying down with a red triangle and exclamation mark over it.
Unsure of what to do in this situation, i read one of the guides on this forum which said simply place the 1.18 zip file (yes i unziped the zip file from the file i downloaded), in the root folder then reboot and it would automatically update. This didnt happen.
I then tried using the adb thing but it said no devices were connected even when my tf701t was connected to the PC. I guessed that I needed to be in the recovery mode that I could not get into, before it would work.
I then read around and they said I had to first get Rom manager + the CMR recovery thing but Rom Manager said it needed root access. In order to get root access, I needed to get into the recovery mode yet again.
So now I am stuck. Whenever I try the RCK option, the error pops up and I can't get any further.
WIll someone please help me? I have no idea what to do anymore except throw the tablet out.
zhuang281 said:
I have spent about 10 hours sitting here, with over 200 tab open trying to find a solution to my problems but I could not find one. My last option is to post here and hope someone can help me out.
I recently bought the tf701t which came with Android 4.2.2. Everything worked fine. A few days ago, I got pushed an update to android 4.3 but it was .1.7 not .1.18 (the newest apparently). With that update, my problems came. When I light up the device by pressing the power button, the lock screen was unresponsive. I pressed my pin numbers in but there was no response and it was as if the touchscreen was broken. However, the home and back button were all working fine. I had to randomly keep pressing until it finally started becoming responsive. When I got in, the quick management window (the one you get by swiping down), kept popping up the moment i press the screen. Because of this, I couldnt do anything. I couldn't even turn off the tablet as the power off option was unable to be pressed by me (When i did press, the window came up again).
After a while, i managed to get around this by again randomly pressing stuff. I got really frustrated and decided maybe if I install a custom rom, this problem might be fixed.
I read around a bit and found that the CROMix rom required firmware 1.18, which I did not have. Because of this, i decided to try install 1.18. First i used the asus unlock tool. Next I tried booting into recovery but here I met my problem. I have guides telling me to first boot using power button + volume down key. This worked. It then told me to choose the RCK option and press the volume up key. This however, did not work. When I selected the RCK option, the android figure appeared lying down with a red triangle and exclamation mark over it.
Unsure of what to do in this situation, i read one of the guides on this forum which said simply place the 1.18 zip file (yes i unziped the zip file from the file i downloaded), in the root folder then reboot and it would automatically update. This didnt happen.
I then tried using the adb thing but it said no devices were connected even when my tf701t was connected to the PC. I guessed that I needed to be in the recovery mode that I could not get into, before it would work.
I then read around and they said I had to first get Rom manager + the CMR recovery thing but Rom Manager said it needed root access. In order to get root access, I needed to get into the recovery mode yet again.
So now I am stuck. Whenever I try the RCK option, the error pops up and I can't get any further.
WIll someone please help me? I have no idea what to do anymore except throw the tablet out.
Click to expand...
Click to collapse
Did you try to put the update on the external sd card? Not sure if that would make a difference but i remember i used to put it there...
You could also flash a custom recovery and flash the update that way. You can find more info in this thread:
http://forum.xda-developers.com/showthread.php?t=2636093
You should safely be able to update your factory firmware first by putting it at /sdcard location.. Then just reboot. It automatic. I Thought there was also an update available in settings after that. Don't unlock til you are at 4.3.
To unlock with Asus unlock tool make sure Google 2 Step verification is disabled.
Then I used fastboot to flash CWM recovery from a computer. I think you flash with fastboot from the newly unlocked bootloader. Power + Vol DOWN.
After you have flash recovery then you can enter it. No scary man lying down.
YayYouFixedIt said:
You should safely be able to update your factory firmware first by putting it at /sdcard location.. Then just reboot. It automatic. I Thought there was also an update available in settings after that. Don't unlock til you are at 4.3.
Click to expand...
Click to collapse
I forgot to mention one thing at the start. I don't actually have on hand a external microSD card. Which I think might be why placing the zip file in the root of the internal storage did not work.
Should it work? Is there any way to get around it? I've been trying to use sideload with cwm (finally got cwm working), but it comes up with "failed to write data protocol fault no status"
EDIT: Through cwm, I chose "choose zip from /sdcard" then select the "0" file directory then i found my zip at the location. I selected it and confirmed install. However, it then comes up with "Error in data/media/0/(name of update here).zip status 6"
Thanks for the help so far but anyone have an idea about this?
Not sure. After googling I see this
http://forum.xda-developers.com/showthread.php?t=1535546
---------- Post added at 09:54 AM ---------- Previous post was at 09:45 AM ----------
You can put the zips anywhere when your recovery is installed.
Okay so I finally managed to get the custom rom installed and working. However, this did not fix my problem with the touchscreen. I think it is because it only changed the firmware but not the android version (still 4.3).
Is there any place I could find android 4.2.2 rom? This was the one the tablet was on before the update that screwed everything up. If I could downgrade to that version, it may work again.
Thanks
I gave up and just put on the android 4.3 ota from droidbasement. Now the tablet randomly restarts and is stick in reboot loop. It wont even allow me to boot into cwm recovery to delete the cache. But i accept that I now have a $600 piece of **** on my hands. Going to bed. Night.
Ya i dont like the whole void your warranty for "using it" idea. If it responds to fastboot you might be ok.
You should be able to download a 4.2.2 rom from Asus' website (.47 was the last build for 4.2.2). You can use fastboot to install it.
Alta1r said:
You should be able to download a 4.2.2 rom from Asus' website (.47 was the last build for 4.2.2). You can use fastboot to install it.
Click to expand...
Click to collapse
I tried that before but it stated "update aborted" immediately after i pressed confirm, in CWM.
But all that is in the past now. I am pretty sure that the tablet is hard bricked since it no longer even opens bootloader. I accidentally pressed the wipe data option and I read that irreversibly damages the tablet. When I hold pwr+vl down, nothing happens anymore, it keeps on its reboot loop.
Hello all! So, I tried to install CM11, the one on this post.
Went into CWM, did Wipe data factory reset and formatted /system. when I tried installing the rom, it said operation aborted and it could not install it. No biggie, the post says to install cm10.2 before doing so.
So i Powered the phone off to copy the file over to the SD. To my surprise, now I can't get into CWM, Philz, TWRP, fastboot or flashmode. Whenever I press the back pin to power the phone off, it turns back on automatically before I have time to press the key and connect the USB cable. Furthermore, when I manage to do it quick enouhg, the green led lights up, but it fades away after 10ish seconds only to display the sony logo again, and a "can't recognize USB device" popup comes up in my PC. I've used flashtool with this same pc in the past, so I don't know what that is about. Also, whenever I try installng flashtool drivers again, just in case 2 things happen:
there is no xperia SP device listed and whatever i select it fails to install.
What can I do now? I had 4.3 with the eXistenZ Ultra ROM before all of this.
Damm, this is the first time this happens to me, I've been swapping roms for ever, and this is not even the first phone i do this in, had a galaxy s2 and a wildfire S before. I feel like such a noob
UPDATE!:
So I finally managed to fix it. I posted this after about 8-9 hours of trying to get into fastboot on the 3 different pcs in my household, all had the drivers at some point and i've worked with them and fastboot and this same phone previously, so I figured they'd still work. They didn't, I couldnot even get SUS to work. So i went to a 4th PC, installed SUS and the needed drivers and it only took like 40 minutes worth of tries. I'm in the software download part of the SUS, i'll keep this updated!
UPDATE2!:
So, it finished downloading but it suddenly disconnected, tried again for about 10 minutes and then got it going again. Downloaded the second time and installed it successfully. Leaving this up for future reference!
Bottomline: if you can't get into flashmode, try on as many PCs as you have available for at least 30 minutes each.
Don't use flash tools just install CM11 with CWM or something, use doomlord kernel to get CWM and install CM11 zip that's it.
Sorry locked boot loader didn't read it correctly don't use my advice .
Th3Duck said:
Don't use flash tools just install CM11 with CWM or something, use doomlord kernel to get CWM and install CM11 zip that's it.
Sorry locked boot loader didn't read it correctly don't use my advice .
Click to expand...
Click to collapse
No problem, it kinda sorted itself out by brute force connections :> Dammed sony, locking the bootloaders for real. I even got the sim unlock code from my phone company and it's still not bootloader unlockable at the phone settings, even though i can now get any sim i want in it -.-
Hello Friends,
Yesterday I was chatting on whatsapp and suddenly my le2 restarts, and then a blue splash screen appears and device keeps on booting,
hence I went to recovery and clear the data, but that also didnt help me,
Then i flash the 13s rom via Flashone 1.9 then also same problem happens, sometimes it went to optimizing apps 3 of 4 and again restarts with blue LED, i were unable to switch it off,
after draining the whole battery I keep mobile to charge but now it is not charging, it only showing Red Solid LED Continuously.
Now I am also Unable to boot into recovery or fastboot mode.
I again flash the stock 13s rom via flashone 1.9 , i got success msg but then also mobile is not booting nor it is charging.
Note: I am on complete stock rom on locked bootloader, never unlocked or rooted, used as come in box.
Please give me a solution on this, I have searched everywhere but not getting any solutions.
Thanks in advance
Try to check your USB cable, most of the time charging issue is due to cable
shubham1358 said:
Try to check your USB cable, most of the time charging issue is due to cable
Click to expand...
Click to collapse
Cable is ok. I have another Le2 and it is charging with that cable very well
I am facing same problem. How you solve this issue? Blue led blinks after flashing any rom and bootloop.
xerol said:
Hello Friends,
Yesterday I was chatting on whatsapp and suddenly my le2 restarts, and then a blue splash screen appears and device keeps on booting,
hence I went to recovery and clear the data, but that also didnt help me,
Then i flash the 13s rom via Flashone 1.9 then also same problem happens, sometimes it went to optimizing apps 3 of 4 and again restarts with blue LED, i were unable to switch it off,
after draining the whole battery I keep mobile to charge but now it is not charging, it only showing Red Solid LED Continuously.
Now I am also Unable to boot into recovery or fastboot mode.
I again flash the stock 13s rom via flashone 1.9 , i got success msg but then also mobile is not booting nor it is charging.
Note: I am on complete stock rom on locked bootloader, never unlocked or rooted, used as come in box.
Please give me a solution on this, I have searched everywhere but not getting any solutions.
Thanks in advance
Click to expand...
Click to collapse
I also have the exact same problem. Phone started rebooting as soon as it booted up. Somehow i managed to unlock the bootloader, but to no avail. Can't seems to find any rom which can boot up. So practically i have a bricked device with trwp. Formatted the system and other partitions with twrp, flashed many roms. Still the result is same. Bootloops.
Hi,
try to to reimage your phone with QFIL from this site:
https://www.techpoison.in/2017/12/how-to-flash-letv-le-2-x526-stock.html
I downloaded everything from there, QFIL, Sparse image and drivers. My phone was bricked, but its working normally now. After you flash the image your phone should charge normally, just try to boot it up. In my case i had issues with baseband, not detected, no sim function and no wifi and phone was restarting each 3-4 minutes, but it was operable. Basedband issues can be solved by hard reseting the phone and updating it to 21s using the local update, just put the 21s stock renamed to update.zip to internal storage and run system update. When you get the error - APK missing, just boot it up again and retry the local update, should work fine the second time, i just deleted the update.zip and put back again and ran the update.
---------- Post added at 03:24 PM ---------- Previous post was at 03:18 PM ----------
Forthe55 said:
I also have the exact same problem. Phone started rebooting as soon as it booted up. Somehow i managed to unlock the bootloader, but to no avail. Can't seems to find any rom which can boot up. So practically i have a bricked device with trwp. Formatted the system and other partitions with twrp, flashed many roms. Still the result is same. Bootloops.
Click to expand...
Click to collapse
Flash the 21s bootloader + modem, one ZIP file, should work fine. Not sure what ROM did you install last time. You can give it a shot with with MIUI 10 - its nougat.
I had similar issues, see my topic, maybe it helps a bit.
https://forum.xda-developers.com/le-2/help/x526-bricked-unknown-baseband-4g-t3838093
Modem + bootloader 21s.
https://drive.google.com/file/d/0B_R...FxTGxlMHM/view
Brother same thing happened to me, a week ago. I cant say about your problem but my problem was due to faulty power button. Actually due to that reason my phone actually kept restarting itself. It showed red light blinking while charging and wasn't able to bypass the optimizing app screen. I also thought it was a software issue but actually it wasn't. I spent about 2 hours figuring out what the actual problem was. The problem was: As we know when power button is hard pressed for about 10-15 seconds it reboots itself.
Although the repair shop guy didn't put new power button but he added a tiny piece of paper in between the power button and body housing to prevent the issue and voila the problem was solved.
delltech1 said:
Hi,
try to to reimage your phone with QFIL from this site:
https://www.techpoison.in/2017/12/how-to-flash-letv-le-2-x526-stock.html
I downloaded everything from there, QFIL, Sparse image and drivers. My phone was bricked, but its working normally now. After you flash the image your phone should charge normally, just try to boot it up. In my case i had issues with baseband, not detected, no sim function and no wifi and phone was restarting each 3-4 minutes, but it was operable. Basedband issues can be solved by hard reseting the phone and updating it to 21s using the local update, just put the 21s stock renamed to update.zip to internal storage and run system update. When you get the error - APK missing, just boot it up again and retry the local update, should work fine the second time, i just deleted the update.zip and put back again and ran the update.
---------- Post added at 03:24 PM ---------- Previous post was at 03:18 PM ----------
Flash the 21s bootloader + modem, one ZIP file, should work fine. Not sure what ROM did you install last time. You can give it a shot with with MIUI 10 - its nougat.
I had similar issues, see my topic, maybe it helps a bit.
https://forum.xda-developers.com/le-2/help/x526-bricked-unknown-baseband-4g-t3838093
Modem + bootloader 21s.
https://drive.google.com/file/d/0B_R...FxTGxlMHM/view
Click to expand...
Click to collapse
Hi, Thanks. I actually did that first, flashing through qfil the same rom. it helped me to go to settings after umpteen attempts to go past language selection screen, and i was just able to oem unlock and enable usb debugging (actually after a 2nd partial failed flashing). the phone kept freezing within seconds of booting up. Now After i unlocked the bootloader and installing twrp and flashing many roms thru twrp, i am still having the same problem of booting up and freezing at start-up. cant flash again through qfil, as i will again loose the unlocked bootloader and twrp.
At least , now i can try different roms to see which can unbrick it. last one used was the twrp flashable rom based on eui (small eui by aurel) but it also freezes on language selection screen or beyond.
I am running out of ideas, lets see.
2nd partial failed flashing? any issues during the flash process? i had some issues when i used usb 3.0, 2.0 worked fine for me. If you have also charging issues stay in twrp and let the phone charge properly, its slower but should work fine. You can try to flash the 21s bootloader with modem, maybe it will boot properly. But try it only when you are able to enter the fastboot mode, longpress volume down and power for 10-15 seconds, if that is working you should be able to flash twrp via fastboot and you can experiment a bit. Try to find the chinesse twrp 3.0.2.0 and try to flash the stock 21s version. Should be also an image file, in standard twrp go to install - image, after selecting the image file click on recovery and install, after installation go back, reboot, recovery. Copy 21s to storage, wipe data, cache, dalvik and flash it, chinesse twrp will skip version check and will let you install the stock image, after install reboot but click on do not replace recovery button - this will keep the chinesse twrp installed.
If nothing helps it can be only a HW failure, maybe the power button, try usb 2.0 port during the flash process, i had issues with 3.0 on my pc, if that doesnt help.try a different cable, no more suggestions, sorry.
delltech1 said:
2nd partial failed flashing? any issues during the flash process? i had some issues when i used usb 3.0, 2.0 worked fine for me. If you have also charging issues stay in twrp and let the phone charge properly, its slower but should work fine. You can try to flash the 21s bootloader with modem, maybe it will boot properly. But try it only when you are able to enter the fastboot mode, longpress volume down and power for 10-15 seconds, if that is working you should be able to flash twrp via fastboot and you can experiment a bit. Try to find the chinesse twrp 3.0.2.0 and try to flash the stock 21s version. Should be also an image file, in standard twrp go to install - image, after selecting the image file click on recovery and install, after installation go back, reboot, recovery. Copy 21s to storage, wipe data, cache, dalvik and flash it, chinesse twrp will skip version check and will let you install the stock image, after install reboot but click on do not replace recovery button - this will keep the chinesse twrp installed.
Click to expand...
Click to collapse
My phone has been flashed multiple times by qfil method. And always it hangs at initial setup (so it boots up, but hangs at language selection or further up screens, before setup can complete and launcher could be loaded).
While trying to flash again with qfil once it stopped at 25 percent (because the battery went dead). Charged the battery and booted up the phone, and i was surprised it booted up. After 2-3 attempts i was able to reach the launcher screen and immediately enabled developer options and oem unlock / usb debugging. Only had few split seconds to do this and the phone froze again. After that i installed twrp and hence treying different roms. Most fail at setup.
Just tried MIUI 9PRO ROM. It also froze at setup multiple times, but once i was able to complete the setup and miui launcher is up , but it reboots or turn off the phone just after that. So cant do anything with the phone. Unsure of whether a newer bootloader will help in these freezing issues as i have been able to boot up at least in some roms only if for few seconds. Will try to tinker the settings of miui rom (if the phone let me do it before freezing/hanging). Lets see. Thanks for suggestions. More suggestions welcome, because i am still unsure weather this is a software or hardware related problem. I am guessing that it may have something to do with Google security as earlier i was getting msg that phone has been wrongly resetted and needs to verify with Google (but i couldn't get a chance to use the same account, as phone kept freezing at setup).
Did you fully charge the battery, if not let it fully charge in twrp. Flashing the roms in twrp works everytime or do you see any errors? Before you flash anything disconnect the usb cable.
---------- Post added at 09:54 PM ---------- Previous post was at 09:47 PM ----------
Try to flash the 21s bootloarder with modem, one zip using twrp. Go to fastboot mode and wipe modems. fastboot erase modem1st fastboot erase modem2st. Put the phone to flash mode and reimage with qfil. Before you do it write down both imeis, you can find them also on the original package on the backside. Also try to remove all sim cards from the phone and try a different cable. If nothing helps, hw issue, maybe the power button mention earlier in this thread.
After reflash skip everything at setup and reset phone to factory defaults. OEM is already unlocked, you dont have to do it again.
I have charged the phone fully before any flashing after that error. I can flash the phone through twrp without any error msg. The phone boots up most of times in various roms but hangs at or after the initial setup screens show (like language selection etc). Flashed the modem+bootloader, success, but it showed bootloader version as 20s (not 21s). Tried the commands u mentioned to erase modems, it say error failed, no such partition found. I had checked the partitions with parted and 56 partitions are there including the modemst1 & 2.
Now re flashed via qfil , did as advised but again the same problem of hanging / freezing at or after initialization screens of various roms.
Forthe55 said:
I have charged the phone fully before any flashing after that error. I can flash the phone through twrp without any error msg. The phone boots up most of times in various roms but hangs at or after the initial setup screens show (like language selection etc). Flashed the modem+bootloader, success, but it showed bootloader version as 20s (not 21s). Tried the commands u mentioned to erase modems, it say error failed, no such partition found. I had checked the partitions with parted and 56 partitions are there including the modemst1 & 2.
Now re flashed via qfil , did as advised but again the same problem of hanging / freezing at or after initialization screens of various roms.
Click to expand...
Click to collapse
Yeah sorry i screwed the command its fastboot erase modest1 modemst2, my bad.
Just now i was able to complete the initialization (setup screen) of sparse image india rom. I can reach the launcher and settings for few seconds before the device freezes or reboots.
So the same problem , with which i started, the only good thing is that i have been able to set oem unlock to on, so that i can flash trwp and various roms (but all fail with the same freezing issues)
Forthe55 said:
Just now i was able to complete the initialization (setup screen) of sparse image india rom. I can reach the launcher and settings for few seconds before the device freezes or reboots.
So the same problem , with which i started, the only good thing is that i have been able to set oem unlock to on, so that i can flash trwp and various roms (but all fail with the same freezing issues)
Click to expand...
Click to collapse
So you erased modems and reflashed with qfil right? If so i assume its a HW problem. Try the fix with the power button, i ran out of ideas
Last thing which can help maybe: https://www.youtube.com/watch?v=LH3VOIlLfvo&t=135s
Download 21s stock image + the chinesse twrp, links should be under the video, i think so, or look somewhere in the forum for new links. Try to reflash the 21s, some people reported that freezing issues were gone after installing the latest EUI. Basically you can do the same after QFIL reflash but you need enough time to copy the ZIP file as UPDATE.ZIP to the internal storage and run the local update via setting, system update and local update, i hope that TWRP will work for you, just follow the video tutorial.
delltech1 said:
Last thing which can help maybe: https://www.youtube.com/watch?v=LH3VOIlLfvo&t=135s
Download 21s stock image + the chinesse twrp, links should be under the video, i think so, or look somewhere in the forum for new links. Try to reflash the 21s, some people reported that freezing issues were gone after installing the latest EUI. Basically you can do the same after QFIL reflash but you need enough time to copy the ZIP file as UPDATE.ZIP to the internal storage and run the local update via setting, system update and local update, i hope that TWRP will work for you, just follow the video tutorial.
Click to expand...
Click to collapse
Did that also, the same problem. The phone freezes after the os is booted. I was wondering what is that isnt touched by flashing ( in download mode or fastboot mode or through twrp). I may need to tinker that. The roms are all fine in the sense they all stop at the same points. Something in the phones partition, which isnt touched by flashing? (There must be, as i flashed with qfil, the oem unlock remains, the bootloader didn't lock, and it remains unaffected by re-imaging)
Try this, maybe it helps:
https://forum.xda-developers.com/le-2/help/issues-installing-twrp-rom-le-s3-x522-t3618662/page2