Related
I am ready for a new phone, but would like to be done with Verizon once they take away my unlimited plan. I read a few posts where it is said that the cdma phones would work on T-Mobile, the carrier I will be going to next. Can anyone confirm or deny the ability to use on both networks?
Thanks
Yes a Verizon Moto X will work on T-Mobile as it is SIM unlocked and supports band 4 LTE. It should be noted that it doesn't support AWS 3G which is the main band T-Mobile uses for their 3G service. If you are in a refarmed market then they will also offer 3G service on the PCS band which the Verizon Moto X does support. Most major cities are refarmed so as long as you are okay with the risk of ending up on 2G more often then you would on a T-Mobile Moto X then you should be okay. From my understanding T-Mobile is working on having almost all of their 3G service on the PCS band in order to free up AWS spectrum for LTE so this issue should become less of an issue over time.
With kit Kat on my vzw x, when I put my T-Mobile Sim in, I must manually enter T-Mobile APN settings to get working data and SMS. I haven't tried MMS.
With 4.2.2 Roms (version that the phone came with plus camera ota) APN settings came down automatically.
I get h+ in refarmed area.
landale said:
Yes a Verizon Moto X will work on T-Mobile as it is SIM unlocked and supports band 4 LTE. It should be noted that it doesn't support AWS 3G which is the main band T-Mobile uses for their 3G service. If you are in a refarmed market then they will also offer 3G service on the PCS band which the Verizon Moto X does support. Most major cities are refarmed so as long as you are okay with the risk of ending up on 2G more often then you would on a T-Mobile Moto X then you should be okay. From my understanding T-Mobile is working on having almost all of their 3G service on the PCS band in order to free up AWS spectrum for LTE so this issue should become less of an issue over time.
Click to expand...
Click to collapse
I thought the VZW Moto X only supported Band 13 LTE?
binary visions said:
I thought the VZW Moto X only supported Band 13 LTE?
Click to expand...
Click to collapse
It supports both. I've confirmed this with a T-Mobile SIM card and is also stated on the Verizon dev page.
http://developer.verizon.com/content/vdc/en/verizon-devices/pages/mot_moto_x.html
landale said:
It supports both. I've confirmed this with a T-Mobile SIM card and is also stated on the Verizon dev page.
http://developer.verizon.com/content/vdc/en/verizon-devices/pages/mot_moto_x.html
Click to expand...
Click to collapse
Wow, that's interesting. Also interesting that the top section specifically references Band 4, yet the actual spectrum is not called out in the technical section below.
Thanks for the info. This is a surprisingly network-flexible phone... not used to that with Verizon phones.
binary visions said:
Wow, that's interesting. Also interesting that the top section specifically references Band 4, yet the actual spectrum is not called out in the technical section below.
Thanks for the info. This is a surprisingly network-flexible phone... not used to that with Verizon phones.
Click to expand...
Click to collapse
Most of the upper level Verizon LTE phones released this year save the HTC One support band 4 either out of the box or will get a software update for it. Verizon is supposed to be making a big push over the next few months to add band 4 LTE service which is much needed here in Houston as our band 13 LTE service is so overloaded that sometimes I am lucky to top 3-4mbps.
Quite possible that Band 4 support was added in one of the updates that was pushed out, so most documentation wouldn't reference it. Best place to check would be the FCC docs when they tested the phone.
fyrmd said:
I am ready for a new phone, but would like to be done with Verizon once they take away my unlimited plan. I read a few posts where it is said that the cdma phones would work on T-Mobile, the carrier I will be going to next. Can anyone confirm or deny the ability to use on both networks?
Thanks
Click to expand...
Click to collapse
I put a T-mobile SIM in my stock 16GB Verizon Moto x. Here is what works and doesn't.
First off, 4G works! in the South Jersey area and it is Blistering fast, I have exceeded 40MB speed test downloads twice, Several in the high 30s and I am avg in mid 20s. Uploads are averaging 20+/- . Compared to Verizon this is like comparing Fios to 1999 era dial up. the best I ever got on Verizon 4G was 14 download but average between 4 and 9 !
The Network notification switches a lot between 4G, "H" mode, whatever that is, just bars and another which I didn't catch quick enough to read ?
Battery has been amazing compared to my galaxy Nexus, I got 7.5 hours of Actual "Screen on Time" which included some GPS use and an hour of music streaming total phone up time was 34+ hours. How long it will perform like this is anyone's guess, today i got about 6.5 of Screen on time. I hope this inst a trend
Now for the bad news - Using it as a Phone. Incoming calls are fine but, making outgoing is a Pain in the A$$.
When I dial a number, (which is a hassle on this KitKat dialer) it often goes to the home screen or back to the dialer. The Call Fails. I am not sure if my dialer is buggy or its a compatibility problem. the KitKat Dialer on the Moto X is an exorcise in futility. Google are you listening? Why reinvent the wheel. All I want in my Dialer is a Number Pad! and a phone book.
When I Open dialer I see Recent calls up top, the whole middle section says all contacts and is otherwise blank, the bottom has the number pad icon, History and settings dots.
Clicking the number pad icon enlarges the bottom section, which then goes all white and removes the three icons. I have to then click the back arrow and re-click the number pad icon to bring it up the actual dialer. .
At this time I can dial. and then the call always fails on the first attempt. Sometimes it takes several attempts to go through.
When I click send on the dialer the 4G disappears and I am left with just the bars. they come back when call is done but sometimes take a few minutes to do so.
If you Kill the dialer app or swipe it away, coming back to it you will have the same issues when trying to get the number pad (two attempts) if you dont, the number pad will open on first attempt. but the calls will still fail on the first try.
I also cant use the internet when in a call, whether WiFi is on or off. Is this a T-mobile problem? I could use the net in Verizon when in a call when on 4G or WiFi
The Data is set to global mode but I have tried both the other settings. On boot up I get a warning saying the SIM is not recognized which I just swipe away.
I am also having this problem. After making a call, the music player and the phones "volume" aspects cease to work., Meaning, I get no sound out of the phone, Music, notifications alarms etc.. This happens almost every time and the only fix is a reboot
I disabled all Verizon Bloat and a lot of Moto Bloat as well This could be causing some of the bugs? But i have tested several different configurations all with the same outcomes.
Hope this helps and puts an end to the - Will it work or not questions. There seem to be a lot of Net Know it all's that flat out say a Verizon Moto x wont work with a T-Mobile SIM or some other undocumented "fact"
Would a verizon sim work in a sprint or T-moblie phone?
I popped in my T-Mobile Sim card and I only get hspa+. I definitely live in a LTE area. Hmm...
Sent from my XT1060 using Tapatalk
im from india i got moto x navy blue customized but device wont get signal dont know whats wrong tried to reset still no luck even getting the signal but instantly disappears and showing emergency only
So, I have a Verizon Moto X and popped in my T-Mobile sim card today and LTE popped up after a few seconds (I live in Boston). My LTE speeds on the internet worked instantly. However, I tried to send a text message and it wouldn't send. Not sure if I need to do anything else to get voice/text to work fine. Any ideas?
if you're on 4.4, you need to manually add APNs
Kittiesoncrack said:
if you're on 4.4, you need to manually add APNs
Click to expand...
Click to collapse
I just popped in the T-Mo sim card again and now text works no issues and calls. Not sure what happened, but oh well.
Now, is there any difference in me using a Verizon Moto X on T-Mobile compared to an AT&T Moto X on T-Mobile. I have both and have been using an AT&T one, but I am just curious.
NickB2008 said:
Do you know where I can find the APNs to fix this? I know how to access it on the phone, but just so I can find it.
Click to expand...
Click to collapse
http://support.t-mobile.com/docs/DOC-2090 <- That should have everything you need as far as the APN goes.
Guys I have customized Moto x but the gsm doesn't works not Able to connect network even im added apns what could be issue
Sent from my XT1060 using xda app-developers app
I fixed my issue. I ported my number into a Verizon unlimited data plan. Problem solved.
Sent from my XT1060 using Tapatalk
Any help guys how to unlock gsm I can see gsm sim getting signal and immediately loosing and showing emergency only what could be issue
Sent from my XT1060 using xda app-developers app
kae9797 said:
Would a verizon sim work in a sprint or T-moblie phone?
Click to expand...
Click to collapse
no because the sprint x is sim locked and doesn't use the same cdma setup, and the t-mobile doesn't support cdma/evdo that verizon uses for voice and 3g data
Hi,
Currently with Big Red but will switch to "someone" once contract is up 3rd qtr next year. Most probably because of the the price and I am sick of VZ dropping back to 3G most of the time where I am.
If I get a Verizon Moto X can I later use that on TMobile. And/rather, a Verizon Moto X can be used on which carriers - all or none
much appreciated.
If it's a developer edition then "I believe" you could use it on sprint. T-Mobile is a GSM carrier and since the only option on the CDMA phones is for global GSM for international travel that you will likely not get it to work. They don't have the radios in it to work on T-mobile. Someone correct me if I'm wrong.
themogul said:
Hi,
Currently with Big Red but will switch to "someone" once contract is up 3rd qtr next year. Most probably because of the the price and I am sick of VZ dropping back to 3G most of the time where I am.
If I get a Verizon Moto X can I later use that on TMobile. And/rather, a Verizon Moto X can be used on which carriers - all or none
much appreciated.
Click to expand...
Click to collapse
This has been covered before yes it will. Verizon moto x is ( might be wrong) the only phone that is Sim unlocked besides T-Mobile and gsm developer edition. Tmobile Sim should work just fine.
http://forum.xda-developers.com/showthread.php?t=2442735
Sent from my XT1060 using xda app-developers app
mawells787 said:
This has been covered before yes it will. Verizon moto x is ( might be wrong) the only phone that is Sim unlocked besides T-Mobile and gsm developer edition. Tmobile Sim should work just fine.
http://forum.xda-developers.com/showthread.php?t=2442735
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
I put a prepaid T-Mobile sim into my Dev Verizon Moto X, and I get good LTE speeds.
folsom68 said:
I put a prepaid T-Mobile sim into my Dev Verizon Moto X, and I get good LTE speeds.
Click to expand...
Click to collapse
Just seconding that I put a T-Mobile SIM in to my VZW dev edition Moto X (4.4), and it was SIM unlocked as expected, but also had good LTE signal, indicating that Band 4 is definitely enabled on these phones, contrary to published specs. Good news!
Can you make phone calls and send text messages with a T-Mo SIM in a VZW phone? Seems as if a CDMA phone would not work on a GSM network for calls and texts.
Sent from my Nexus 7 using Tapatalk
scottjb said:
Can you make phone calls and send text messages with a T-Mo SIM in a VZW phone? Seems as if a CDMA phone would not work on a GSM network for calls and texts.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yes. I haven't done it with the Moto X yet, but I did it without issue previously with both the Verizon S4 and LG G2. It's part of an FCC agreement when Verizon got LTE. It's basically GSM unlocked. Data, text, and calls work.
Sent from my XT1060
scottjb said:
Can you make phone calls and send text messages with a T-Mo SIM in a VZW phone? Seems as if a CDMA phone would not work on a GSM network for calls and texts.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Most Verizon LTE phones have a GSM radio and work on AT&T and Tmobile
I made a call to verify it works, and I received text messages from T-Mobile.
I also didn't have to add APNs, it seemed to figure them out.
Sprint won't work. Cause most of the CDMA bands and LTE bands are different.
Sent from my XT1056 using Tapatalk
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
But I'm pretty sure T-Mobile will cause it is Sim unlocked
Sent from my XT1056 using Tapatalk
supr2nr said:
If it's a developer edition then "I believe" you could use it on sprint. T-Mobile is a GSM carrier and since the only option on the CDMA phones is for global GSM for international travel that you will likely not get it to work. They don't have the radios in it to work on T-mobile. Someone correct me if I'm wrong.
Click to expand...
Click to collapse
Yes, you are wrong. It does work with either a "retail" Verizon phone, or developer edition.
The big misconception is that since Verizon uses CDMA for voice and sms, that their phones only work on CDMA. This is NOT True.
Because Verizon's 4G LTE phones are "global" they support the same GSM/GPRS/Edge bands as ATT and T-Mobile for voice and data so they can be used globally on GSM carrier networks. Another little plus is that due to the FCC rules around their 700Mhz spectrum, they are SIM unlocked, so they happen to work with ATT and T-Mobile sim inserted. Since ATT uses the same bands for HSPA and HSPA+ as they do for EDGE, you can get HSPA speeds. In areas where T-Mobile's "network modernization" has refarmed their 1900Mhz edge to HSPA, you'll get HSPA speeds. In Tmobile areas that HSPA is still over AWS, you'll fall back to Edge when trying Verizon branded devices.
Using both developer and "retail" variants of the Verizon Moto X, I have inserted my T-Mobile SIM and had it work after setting the phones to "global". I've done the same with my iPhone 5, iPhone 5S, Blackberry Z10, Q10, Nokia Lumia 928, and Samsung Galaxy S4 and Note 3. Some of the phones, like the Z10 and 928 only gave me EDGE speeds the last time I tried them. The X and S4 have given me HSPA. T-Mobile recently rolled out LTE here, as putting the T-Mo Sim in my VZW iPhne 5S last week gave me T-Mo LTE for the first time. When i get time I'll have to go back and test my other devices again to see what they do.
With recent firmware updates on my X, note 3 and Galaxy S4, I have had to manually enter T-Mobile APN settings to get them to work.
scottjb said:
Can you make phone calls and send text messages with a T-Mo SIM in a VZW phone? Seems as if a CDMA phone would not work on a GSM network for calls and texts.
Click to expand...
Click to collapse
Yes it does work as long as the APN settings come down automatically to your phone, or you manually enter the correct APN settings.
On a side note... some have asked if you can do the same with a Sprint phone (since they are cdma based too). The answer is..I don't know for sure, but it really depends. I haven't looked into the sprint phones to know their "global roaming" capabilities, and what radios and frequencies their devices support. I guess as long as their phones support the quad band GSM frequencies and are (or can be) SIM Unlocked, then you can do the same with Sprint phones to get at least Edge speeds. HSPA and LTE would again depend on the frequencies the sprint phones support, and the target carrier network uses.
Thank you everybody!!!
This is excellent info and more importantly very good details. I am very grateful...
Time to the Moto X with orange accents now
themogul said:
Hi,
Currently with Big Red but will switch to "someone" once contract is up 3rd qtr next year. Most probably because of the the price and I am sick of VZ dropping back to 3G most of the time where I am.
If I get a Verizon Moto X can I later use that on TMobile. And/rather, a Verizon Moto X can be used on which carriers - all or none
much appreciated.
Click to expand...
Click to collapse
I put a T-mobile SIM in my stock 16GB Verizon Moto x. Here is what works and doesn't.
First off, 4G works! in the South Jersey area and it is Blistering fast, I have exceeded 40MB speed test downloads twice, Several in the high 30s and I am avg in mid 20s. Uploads are averaging 20+/- . Compared to Verizon this is like comparing Fios to 1999 era dial up. the best I ever got on Verizon 4G was 14 download but average between 4 and 9 !
The Network notification switches a lot between 4G, "H" mode, whatever that is, just bars and another which I didn't catch quick enough to read ?
Battery has been amazing compared to my galaxy Nexus, I got 7.5 hours of Actual "Screen on Time" which included some GPS use and an hour of music streaming total phone up time was 34+ hours. How long it will perform like this is anyone's guess, today i got about 6.5 of Screen on time. I hope this inst a trend
Now for the bad news - Using it as a Phone. Incoming calls are fine but, making outgoing is a Pain in the A$$.
When I dial a number, (which is a hassle on this KitKat dialer) it often goes to the home screen or back to the dialer. The Call Fails. I am not sure if my dialer is buggy or its a compatibility problem. the KitKat Dialer on the Moto X is an exorcise in futility. Google are you listening? Why reinvent the wheel. All I want in my Dialer is a Number Pad! and a phone book.
When I Open dialer I see Recent calls up top, the whole middle section says all contacts and is otherwise blank, the bottom has the number pad icon, History and settings dots.
Clicking the number pad icon enlarges the bottom section, which then goes all white and removes the three icons. I have to then click the back arrow and re-click the number pad icon to bring it up the actual dialer. .
At this time I can dial. and then the call always fails on the first attempt. Sometimes it takes several attempts to go through.
When I click send on the dialer the 4G disappears and I am left with just the bars. they come back when call is done but sometimes take a few minutes to do so.
If you Kill the dialer app or swipe it away, coming back to it you will have the same issues when trying to get the number pad (two attempts) if you dont, the number pad will open on first attempt. but the calls will still fail on the first try.
I also cant use the internet when in a call, whether WiFi is on or off. Is this a T-mobile problem? I could use the net in Verizon when in a call when on 4G or WiFi
The Data is set to global mode but I have tried both the other settings. On boot up I get a warning saying the SIM is not recognized which I just swipe away.
I am also having this problem. After making a call, the music player and the phones "volume" aspects cease to work., Meaning, I get no sound out of the phone, Music, notifications alarms etc.. This happens almost every time and the only fix is a reboot
I disabled all Verizon Bloat and a lot of Moto Bloat as well This could be causing some of the bugs? But i have tested several different configurations all with the same outcomes.
Hope this helps and puts an end to the - Will it work or not questions. There seem to be a lot of Net Know it all's that flat out say a Verizon Moto x wont work with a T-Mobile SIM or some other undocumented "fact"
I have the same issues as SOMFW. Disabling LTE resolves all these problems, so it seems like it's an issue with the LTE-to-2G/3G fallback for phone calls.
When I force it into HSPA+, I have both simultaneous voice and data and no dialing issues.
nethead25 said:
I have the same issues as SOMFW. Disabling LTE resolves all these problems, so it seems like it's an issue with the LTE-to-2G/3G fallback for phone calls.
When I force it into HSPA+, I have both simultaneous voice and data and no dialing issues.
Click to expand...
Click to collapse
How did you disable 4G? or Force it into HSPA+? Is there a setting I am missing?
Somebody else mentioned Manually adding T-Mobile APN is this something you did?
On My Moto,x when using the Vz SIM there is an APN labeled Verizon that appears on its own, On the TM SIM it was blank
Also, while on the TM SIM under About Phone / Status My phone number doesn't show, On the Vz SIM it is there and the Dialer works fine. But I still get the Dialer Bug, which is, When I click the Keypad icon the bottom area goes blank and I have to hit the back button and repeat it. This only happens if I swipe the dialer out of running apps list, Force close it or haven't used it for several hours.
Any Ideas?
SOMFW said:
How did you disable 4G? or Force it into HSPA+? Is there a setting I am missing?
Somebody else mentioned Manually adding T-Mobile APN is this something you did?
On My Moto,x when using the Vz SIM there is an APN labeled Verizon that appears on its own, On the TM SIM it was blank
Also, while on the TM SIM under About Phone / Status My phone number doesn't show, On the Vz SIM it is there and the Dialer works fine. But I still get the Dialer Bug, which is, When I click the Keypad icon the bottom area goes blank and I have to hit the back button and repeat it. This only happens if I swipe the dialer out of running apps list, Force close it or haven't used it for several hours.
Any Ideas?
Click to expand...
Click to collapse
These are the steps I used to turn off LTE and enable HSPA:
1) Download/install the app LTE OnOff
2) Change Mobile Network type in Settings to LTE / GSM / UMTS
3) On LTE OnOff, hit the Three-Dot menu in the top right, and select "Select radio band"
4) Select USA Band
5) Hit the Turn Off Radio button
6) Select GSM auto (PRL) under Preferred Network Type
7) Turn On Radio
The phone should show no data for a second, then 3G, then eventually an H for HSPA will be displayed.
You can also try GSM only or WCDMA preferred if GSM auto doesn't work.
Still trying to figure out how to get LTE to play nice with it.
There is a known LTE bug that causes this issue in 4.4. Check aracanexvi's thread in the Droid Ultra section. Basically we will need to leave LTE off of you want to make calls reliably.
Sent from my XT1080 using xda app-developers app
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
Would be easier if I just shared the thread
http://forum.xda-developers.com/showthread.php?t=2591954
4.4 and Non-VZW carriers
Sent from my XT1080 using xda app-developers app
Which one are people having better luck with, at or T-Mobile?
can you put a T-Mobile ROM for it to work as well?
Using Verizon Moto X (locked Verizon retail) on ATT should be as good as using it on Tmobile, assuming I don't need LTE ?
Thanks.
which one to use at any particular time?
Just voice on Verizon - no SIM.
lightfire said:
which one to use at any particular time?
Just voice on Verizon - no SIM.
Click to expand...
Click to collapse
Looks like there are 100 other people who are just like me - don't know.
It looks like this would be possible with just a switch of APN's and checking a choice under "networks" or possibly it would auto choose the APN based on networks choice. But in practical application would it work?
I know i have switched b/w AT&T, T-Mobile, and VZW and it would recognize the network. Only network that wouldn't work for me was Sprint.
Verizon LTE phones require a Verizon SIM to work with both its CDMA network and its LTE network. If a Verizon SIM is not present in one of these devices, it won't work with either Verizon's CDMA network or its LTE network.
dualityim said:
Verizon LTE phones require a Verizon SIM to work with both its CDMA network and its LTE network. If a Verizon SIM is not present in one of these devices, it won't work with either Verizon's CDMA network or its LTE network.
Click to expand...
Click to collapse
Yes, my question though is, for voice only on Verizon - without SIM just CDMA activation - Can a person have both and switch easily between them by activating the 3g data - voice via phone identification no SIM required with Verizon (pageplus) and a SIM for at&t (straighttalk or redpocket).
lightfire said:
Yes, my question though is, for voice only on Verizon - without SIM just CDMA activation - Can a person have both and switch easily between them by activating the 3g data - voice via phone identification no SIM required with Verizon (pageplus) and a SIM for at&t (straighttalk or redpocket).
Click to expand...
Click to collapse
Ah, interesting. I hadn't thought about using a CDMA MVNO on Verizon. I know that if you are just using Verizon, CDMA activation without SIM won't work because Verizon is using the SIM to authenticate to its CDMA network on LTE-enabled phones. But for Page Plus, you may be able to manually program the CDMA activation without using a SIM? Have you manually programmed CDMA phones to work on Page Plus in the past, and if so, how does it work?
dualityim said:
Ah, interesting. I hadn't thought about using a CDMA MVNO on Verizon. I know that if you are just using Verizon, CDMA activation without SIM won't work because Verizon is using the SIM to authenticate to its CDMA network on LTE-enabled phones. But for Page Plus, you may be able to manually program the CDMA activation without using a SIM? Have you manually programmed CDMA phones to work on Page Plus in the past, and if so, how does it work?
Click to expand...
Click to collapse
Yes, I have a Moto-G activated on pageplus. I called them up, gave the ph ID then called a Verizon activation number. Worked well.
My problem is I am on the edge where Verizon works a bit better (have to walk outside and find a reception area) at my home with AT&T not picking up except occasionally. If I had the cheap pageplus plan for Verizon (not LTE) and Redpocket or straighttalk activated on AT&T it would give me a bit of flexibility if I could do it on one phone.
I just don't know if it will work. Perhaps the Nexus 6 being a LTE device won't activate on pageplus as a 3g device.
I may just activate an AT&T MVNO SIM on data and just use hangouts and hangouts dialer. Use wi-fi at home and data SIM when about. Redpocket has a T-mobile 1 GB plan for $10/month; haven't yet tried Tmobile reception. I live in a cellular black hole.
Anyone using LTE on the Nexus 6 with AT&T? Mine from Motorola came today. I'm just getting HSPA though. When I try to select preferred network LTE, the button is filled but the text doesn't say lte. Previous phone was the 6 Plus. Any help? Talked to AT&T and they added the phone but no worky!
breezing on the LTE here
dwd3885 said:
Anyone using LTE on the Nexus 6 with AT&T? Mine from Motorola came today. I'm just getting HSPA though. When I try to select preferred network LTE, the button is filled but the text doesn't say lte. Previous phone was the 6 Plus. Any help? Talked to AT&T and they added the phone but no worky!
Click to expand...
Click to collapse
make sure you have the correct APN settings,
I had issues at first but turned on airplane mode for 5 minutes then after I turned it off I had LTE
dwd3885 said:
Anyone using LTE on the Nexus 6 with AT&T? Mine from Motorola came today. I'm just getting HSPA though. When I try to select preferred network LTE, the button is filled but the text doesn't say lte. Previous phone was the 6 Plus. Any help? Talked to AT&T and they added the phone but no worky!
Click to expand...
Click to collapse
Lte works fine and Att is bad where I live.
dwd3885 said:
Anyone using LTE on the Nexus 6 with AT&T? Mine from Motorola came today. I'm just getting HSPA though. When I try to select preferred network LTE, the button is filled but the text doesn't say lte. Previous phone was the 6 Plus. Any help? Talked to AT&T and they added the phone but no worky!
Click to expand...
Click to collapse
I have the same issue, except I was not able to even select LTE before calling the tech support.
The tech support has confirmed my data plan and APN setting are correct.
Can it be like the tech support said it might be the sim card? Or my APN setting is actually incorrect?
Anyone has solution for this issue?
If someone with LTE can post his/her APN setting, I'd be really thankful.
bigwhiteegg said:
I have the same issue, except I was not able to even select LTE before calling the tech support.
The tech support has confirmed my data plan and APN setting are correct.
Can it be like the tech support said it might be the sim card? Or my APN setting is actually incorrect?
Anyone has solution for this issue?
If someone with LTE can post his/her APN setting, I'd be really thankful.
Click to expand...
Click to collapse
Here ya go
Sent from my Nexus 6
Thanks a lot! It does allow me to use LTE.
I found out my phone switched to LTE couple minutes after I post the reply.
I had another APN setting, and it also works with the setting you provided.
So the key here is to talk to a knowledgeable tech support, and confirm your plan, IMEI, and APN setting is correct on his/her end.
The tech support mentioned my device displayed on his end was not Nexus 6, so I provided him with my IMEI, and that is probably why I was able to select LTE for my prefer network.
I'm on AT&T with an AT&T preordered 32GB. I've got my grandfathered unlimited LTE (according to the tech support chat dude) and the IMEI matches his database. I'm still only getting on average 1-3Mbps down and .02-1Mbps up.
I've double checked APN settings, tried the old "phone" APN settings, spoke with chat who advised me to try a new SIM or exchange the phone, reboots and all. I'm pretty much in DC, so coverage should be a non-issue. I've got full bars and the indicator shows "LTE". I'm at a loss and was wondering if anyone on here had any bright ideas?
I have AT&T, but purchased my unit at T-Mobile. I switched sim cards out the box, and had LTE with no issues.
Have no problems with mine (and yes, mine is a freshly rooted AT&T model Nex6--yes, you can oem unlock and root it just fine).
Of course, I also live in one of those parts of the country where the Deathstar Telco tends to have the best coverage so there's that; I'd be shocked if I DIDN'T get LTE around here
(Which is rather more than I can say for Sprint around here, but that's neither here nor there)
So I got a Chinese edition phone with band 2, 4, 5, 12, and 17 to fully support both TMobile and ATT network. The Global edition was missing band 17 for ATT so I didnt want to go that route. Been going back and forth with ATT a bit for the past few days since my device came in. The phone shows up and an "unknown device" on their network when we tried adding the IEMI. It will get UMTS (2g) and HSPA+ (3Gish/4G), but will not connect to any LTE or GSM. The phone supports GSM fine, so its strange that it wont do normal cellular connection over that, it will only do cellular over UMTS. The device wont detect as an LTE device and so the sim wont activate LTE on it.
Anyone else with ATT have this issue? And were you able to resolve it somehow?
Or those with TMobile in the US, are you able to activate the phone fine and get full coverage and LTE working?
I messed around with the connection settings in the *#*#4636#*#* menu. Only the "LTE/TD-SCDMA/UMTS" and "LTE/TD-SCDMA/WCDMA" will work properly at all. Both options give me UMTS for cellular, and HSPA+ for data. Of the 4 APNs that ATT uses, only the "ATT Phone" will work at all. The standard LTE APN "NXTGENPHONE" will leave the phone with no data or cellular service. This is related to the phone not being detected as an LTE device and the SIM not activating as such.
I simply put my AT&T sim in my China version and it worked straightaway. I didn't have to do anything else.
I am on Cricket, which leases service from AT&T, so I should know if it works once it comes Tuesday.
Just for perspective, I got a EU version of the Mi 9. Popped in a T-Mobile sim and it worked out of the box. Try the other sim slot. Could be your sim card if not.
Try these codes in Dialer. See if that helps anything.
VoLTE *#*#86583#*#*
VoWIFI *#*#869434#*#*
I was just making an ATT account so no previous activations or sims. So that could be the issue. I will try activating a sim with an old phone and then move the sim over. Or since it is the same hardware as a Galaxy S10, ill see if I can find a store that will activate a sim with a floor model S10 and then let me swap the sim into my Mi 9
Straight talk (ATT sim) lte without issue. no programming necessary , I have the global model though
jvs60 said:
I simply put my AT&T sim in my China version and it worked straightaway. I didn't have to do anything else.
Click to expand...
Click to collapse
airwebber said:
I am on Cricket, which leases service from AT&T, so I should know if it works once it comes Tuesday.
Click to expand...
Click to collapse
MixEvo said:
Straight talk (ATT sim) lte without issue. no programming necessary , I have the global model though
Click to expand...
Click to collapse
Where did you guys buy the China version from?
US mobile white SIM from starter kit (T-Mobile) works well with LTE on Chinese model of Mi 9. Black one (Verizon) technically works, registers in the network and enables data, but Verizon refuses the IMEI as non-certified brand of the phone. Trick with activation on the iphone first and switching to xiaomi did not work, service gets cut off, when trying to make a call, it keeps dropping. AT&T based: Cricket and Straight Talk work just fine too.
---------- Post added at 06:15 AM ---------- Previous post was at 06:14 AM ----------
StDevious said:
Where did you guys buy the China version from?
Click to expand...
Click to collapse
Aliexpress https://www.aliexpress.com/item/Ori...222.html?spm=a2g0s.9042311.0.0.58b14c4dxws9df
You'r welcome =)
StDevious said:
Where did you guys buy the China version from?
Click to expand...
Click to collapse
I bought my Transparent Edition from Tradingshenzhen.com
Neolo said:
US mobile white SIM from starter kit (T-Mobile) works well with LTE on Chinese model of Mi 9. Black one (Verizon) technically works, registers in the network and enables data, but Verizon refuses the IMEI as non-certified brand of the phone. Trick with activation on the iphone first and switching to xiaomi did not work, service gets cut off, when trying to make a call, it keeps dropping. AT&T based: Cricket and Straight Talk work just fine too.
Click to expand...
Click to collapse
Thanks for the info.
I was wondering about Verizon, since it support some CDMA bands and support 2 out of 3 of the LTE bands they use (doesnt support B13). Unfortunately I never tried it myself since half the coverage near me uses the band this phone doesnt support on Verizon.
I went and got my ATT account updated to an old Nexus 6 IMEI number and it got LTE on the N6. I then took the sim and put it in my Mi 9 and now the Mi 9 has LTE. So for anyone just getting this phone, you must have an IMEI on your account that is recognized as an LTE phone. If you try to add the IMEI of the Mi9 it is not recognized by ATT and wont provision LTE.
IMEI spoofing does not work with Verizon, as they simply ban the device. They call it “non certified”. Bands are seem ok.
StDevious said:
Where did you guys buy the China version from?
Click to expand...
Click to collapse
I been purchasing from liaow. Never ran across a issue with them
I've been having the same issue, with a recently-bought (last week arrived) Mi 9 Global on AT&T postpaid. LTE showed up and worked fine day one, now network speeds are dropped down to 3.5G speeds. Anyone else have success with getting LTE on a fresh SIM?
EniGmA1987 said:
So I got a Chinese edition phone with band 2, 4, 5, 12, and 17 to fully support both TMobile and ATT network. The Global edition was missing band 17 for ATT so I didnt want to go that route. Been going back and forth with ATT a bit for the past few days since my device came in. The phone shows up and an "unknown device" on their network when we tried adding the IEMI. It will get UMTS (2g) and HSPA+ (3Gish/4G), but will not connect to any LTE or GSM. The phone supports GSM fine, so its strange that it wont do normal cellular connection over that, it will only do cellular over UMTS. The device wont detect as an LTE device and so the sim wont activate LTE on it.
Anyone else with ATT have this issue? And were you able to resolve it somehow?
Or those with TMobile in the US, are you able to activate the phone fine and get full coverage and LTE working?
I messed around with the connection settings in the *#*#4636#*#* menu. Only the "LTE/TD-SCDMA/UMTS" and "LTE/TD-SCDMA/WCDMA" will work properly at all. Both options give me UMTS for cellular, and HSPA+ for data. Of the 4 APNs that ATT uses, only the "ATT Phone" will work at all. The standard LTE APN "NXTGENPHONE" will leave the phone with no data or cellular service. This is related to the phone not being detected as an LTE device and the SIM not activating as such.
Click to expand...
Click to collapse
I got the Chinese version and I'm in the US. And I I have the straight talk T-Mobile sim and everything works like it is suppose to expect my internet. It says its 4g but it is very very slow. Any ideas?