Phone not start. Xposed problems after flashing. Please help! I'm newbie!
Good morning to all.
I am a new user forum, I'm from Argentina. I apologize for the English, but not my strong point, and use google translator to raise this query.
I bought a Samsung Galaxy Note 5 SM N920G few days ago, and have successfully rooted. There is no problem.
Then I wanted to install Xposed, which as you know you have to flash it via recovery, with files that are here in the forum.
I downloaded and Xposed flash the file, and then the phone would not start again.
I tried to flash a ROM Stock (5.1.1) with Odin, from Argentina, but it gives me error, and will not let me flash. (I have some experience with Odin , I could flash ROMs on Galaxy Note 3 S5 , S4 , Core 2 , Grand 2, etc.)
I read elsewhere that I should wait for a new version of Android and then flash with Odin , is that true?
I leave a few shots of the errors I get when trying to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In addition, other details that scared me a lot, is that I indicated in recovery mode when the phone will restart, which has no operating system installed.
PS: I am very scared because I forgot to backup.
Of course, very much appreciate your help and I'm quite worried about this.
A big hello from Argentina!
LisandroLNH said:
Good morning to all.
I am a new user forum, I'm from Argentina. I apologize for the English, but not my strong point, and use google translator to raise this query
A big hello from Argentina!
Click to expand...
Click to collapse
Open Smart Switch, click MORE, click Emergency software recovery and initialization, click device initialization, type in your model number using caps and dashes such as SM-N9200 or whatever your device is, then input your serial number again using caps for all the letters in your SN, put your phone in download mode by pressing power/volume down/home, then volume up, finally connect your phone to your PC and continue with the prompts from Smart Switch. Good luck.
go into recovery wipe everything by formatting data, then boot into dl mode. Plug phone into computer launch odin. then go to sammobile.com and look up SM-N920G and download latest firmware. once downloaded and in odin, click on the csc and select what you downloaded from sammobile. and hit start. you might have to add a kernel too. i would you the auto root guide on the forums as guide also
Thanks! The fone is already on again! So much thank you!
Glad you have it working again.
Next time after you flash the xposed framework in TWRP, clear the dalvik cache AND the regular cache and reboot. If it hangs, reboot to recovery and flash the xposed uninstaller, then clear dalvik and cache and all should be back to normal.
consultation
hi , You might help me, as you did to install TWRP recovery in your note 5 ? Apology not able to help you with your question, but it would be great if you could tell me, thanks ( y como dices ser de argentina se te da mejor asi , como instalaste twrp en el note ? disculpa no poderte ayudar con tu duda , gracias
Related
Hi
I have a Samsung Galaxy SIII Mini GT-I8190N
Stock 4.1.2, I think currently on it.
From Carphone Warehouse (UK) Not sure if it is unlocked to any network...(O2 if any)
Can someone please give a noob to rooting some advice on the best way to back up the system in case of a major disaster before rooting,
And also some advice on how to root, install 4.2.2 on it.
Total noob with android so a walk through would be appreciated.
I have looked at the forum but am a bit baffled as a lot of the walkthroughs seem to fail for some and work for others....
Thanks in advance.
Reds
My personal tutorial easiest way to root http://forum.xda-developers.com/showthread.php?t=2147852
Sent from my GT-I8190 using xda app-developers app
I'm assuming that increasing the Flash Counter value and reseting it to default is not a bad thing, so here's simple instructions:
Make sure you have proper usb drivers installed for your samsung or ODIN won't find the phone!
Important! http://forum.xda-developers.com/showthread.php?t=2147852
Step 1, Download ODIN, CWM and the rooted 4.2.2 ROM + GAPPS you wish to install and copy them into your phone (phone memory or external SD)
Step 2, Shutdown your phone. Boot it into Download mode (press and hold VOLUME DOWN and HOME KEY, switch phone on and let go the two buttons when you see the warning)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 3, Use ODIN to flash custom recovery into your phone
Step 4, Reboot into the custom recovery (shutdown the phone completely, when it's off, press and hold VOLUME UP and HOME KEY, then switch the phone on. when recovery logo is on, you can let go off the two buttons)
Step 5, Use CWM to backup the current ROM and install the desired ROM. Remember to do a Factory Reset + DALVIK/CACHE format before rebooting!
Step 6, Install Triangle Away, http://forum.xda-developers.com/showpost.php?p=22462960&postcount=1 and nuke away the pesky Flash Counter!
Happy times!
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
seedrom193 said:
My personal tutorial easiest way to root http://forum.xda-developers.com/showthread.php?t=2147852
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Lol, I linked your tutorial to him also :silly:
i have to wait for too long for booting after i root. what should i do?
phylandroz said:
i have to wait for too long for booting after i root. what should i do?
Click to expand...
Click to collapse
If that's the first boot after installing another rom, let it sit around for ~5minutes. If it takes longer than that, something is wrong. You are missing GUI (TouchWiz/Trebuchet) or you have flashed completely wrong rom.
mikma80 said:
If that's the first boot after installing another rom, let it sit around for ~5minutes. If it takes longer than that, something is wrong. You are missing GUI (TouchWiz/Trebuchet) or you have flashed completely wrong rom.
Click to expand...
Click to collapse
How to fix the problem with missing GUI? I am having no TouchWiz by now
phylandroz said:
How to fix the problem with missing GUI? I am having no TouchWiz by now
Click to expand...
Click to collapse
The most simple way is to reflash the stock rom back in the phone.
How to Install Android 4.4.4 KitKat on Samsung Galaxy S3 GT-I9305 Official with Odin
Video: https://www.youtube.com/watch?v=PYi_uG0L0B0
Download:
KitKat: http://www.sammobile.com/firmwares/3/?download=35546
Odin v3.09: https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek
Images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By: SmartPhones for You
THis process isnt working for me...
Hi,
I have tried updating my SE i9305 LTE with this new firmware, but on restarting the phone always starts up in factory mode (text with phone parameters appears on the screen) and without access to the phone network. I believe the previous androiw version to this was 4.2?, but cannot be sure.
I have tried rooting the phone with CF-Auto-Root-m3-m3zh-gti9305, and again keep getting the factory mode upon reset, and the root checker program indicates the device is not properly rooted.
Any ideas what may be going wrong?
THanks all,
Carbar
carbar said:
Hi,
I have tried updating my SE i9305 LTE with this new firmware, but on restarting the phone always starts up in factory mode (text with phone parameters appears on the screen) and without access to the phone network. I believe the previous androiw version to this was 4.2?, but cannot be sure.
I have tried rooting the phone with CF-Auto-Root-m3-m3zh-gti9305, and again keep getting the factory mode upon reset, and the root checker program indicates the device is not properly rooted.
Any ideas what may be going wrong?
THanks all,
Carbar
Click to expand...
Click to collapse
Install Official KitKat and Wipe Cache and Factory Reset in Recovery
GunSper said:
Install Official KitKat and Wipe Cache and Factory Reset in Recovery
Click to expand...
Click to collapse
I tried this with exactly the same result. After wiping the cache and factory reset, the phone takes a while to boot up. Once it does, it is in german, but the black overlay screen with all the firmware parameters continues to appear. Could this have to do with the fact that this is a UK phone (maybe its a hardware issue)?
I have read that in order to remove the factory mode, the phone needs to be rooted, but again I haven't found instructions that actually work.
Any more ideas? Am I really the only one with this issue?
Thanks,
carbar
Install Android kitkat over CM 11
Hi, my stock rom is 4.3 then I install CM 11 4.4.4 kitkat, it was so buggy. I want to go back to 4.3 but since there is 4.4.4 stock rom. Can I install stock 4.4.4 over CM11 by doing the same method you showing ?
Thanks
MikeyNoob said:
Hi, my stock rom is 4.3 then I install CM 11 4.4.4 kitkat, it was so buggy. I want to go back to 4.3 but since there is 4.4.4 stock rom. Can I install stock 4.4.4 over CM11 by doing the same method you showing ?
Thanks
Click to expand...
Click to collapse
Of course, no problem
works
this method worked for me just fine, but first I did wiped cache and a factory reset
Anyone with the miracast bug? Screen mirroring not working with measy A2W.
Nice 100% Working
zexzen said:
Anyone with the miracast bug? Screen mirroring not working with measy A2W.
Click to expand...
Click to collapse
I haven't tried this but I believe that works
Hi ☺ tnks for reply.
This time I did a clean install. I installed the 4.4.4 stock rom via odin and screen mirroring worked. But, after doing root, crashed ... Obviously it was because the root. Something to do?
ScreenShot 4.4.4 vs 4.3 On Galaxy S3 Gt-i9305
http://youtu.be/dcppLCkA6ho
Sent from my GT-I9305 using Tapatalk
any one can give link to download the flash file? many thanks..
https://www.sammobile.com/samsung/galaxy-s-/firmware/GT-I9305/H3G/download/I9305XXUFNL1/43366/
I got the notification for the 5.1.1 upgrade, downloaded, reboots the phone, gets about half way, and the green android robot lays down and throws up a red exclamation point error.
Looked on the developers .google .com /android/nexus/images site, can't find a 5.1.1 image for my phone (AT&T / LMY47D)
Any way to fix this? Don't care about loosing any apps/data, I can install it all again.
Thanks for your suggestions.
In Lollipop any modifications to the system partition, such as rooting, will result in OTAs failing. I guess to prevent possible bricking.
AFAIK, You should be okay flashing the "5.1.1 (For Sprint, USC ONLY) (LMY47Z)", LMY47Z is the same build AT&T is rolling out OTA. If you're not experienced flashing images there are a couple tutorials on here.
n6android said:
I got the notification for the 5.1.1 upgrade, downloaded, reboots the phone, gets about half way, and the green android robot lays down and throws up a red exclamation point error.
Looked on the developers .google .com /android/nexus/images site, can't find a 5.1.1 image for my phone (AT&T / LMY47D)
Any way to fix this? Don't care about loosing any apps/data, I can install it all again.
Thanks for your suggestions.
Click to expand...
Click to collapse
Follow the advice above but i would first do `fastboot erase system` to erase root files before you start flashing to avoid problems.
All done
Got it working - thanks for your help!
Is it wrong or correctly?
I was buyed my nexus 6 before 2 weeks stock, (shamu, international LMY47Z, not rooted)and im not sure is it correctly this on software (firmware) update display?
Wunder is it, when i try check update on down windows, nothing happened like connected on update site or network connecting, etc, only - nothing happened.
Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks forwarding on answer.
Regards
miro666 said:
I was buyed my nexus 6 before 2 weeks stock, (shamu, international LMY47Z, not rooted)and im not sure is it correctly this on software (firmware) update display?
Wunder is it, when i try check update on down windows, nothing happened like connected on update site or network connecting, etc, only - nothing happened.
Screenshot :
View attachment 3381929
Thanks forwarding on answer.
Regards
Click to expand...
Click to collapse
English screenshot please ☺
Verstuurd vanaf mijn Nexus 6 met Tapatalk
gee2012 said:
English screenshot please
Verstuurd vanaf mijn Nexus 6 met Tapatalk
Click to expand...
Click to collapse
Satisfacted? Anyway you have Google translate...
miro666 said:
Satisfacted? Anyway you have Google translate...
Click to expand...
Click to collapse
I don`t make the rules but its a hassle to Google translate posts all the time from users from all over the world.`s. That`s why the used forum language here on XDA is English
miro666 said:
Satisfacted? Anyway you have Google translate...
Click to expand...
Click to collapse
N9 one is going to translate YOUR errors so they can help YOU.
If you want help, YOU must translate.
danarama said:
N9 one is going to translate YOUR errors so they can help YOU.
If you want help, YOU must translate.
Click to expand...
Click to collapse
Hear hear .....
Whats now is wrong? I was translated to english on last screeenshot (red worth on picture)...
Regards
Nobody help?
miro666 said:
Nobody help?
Click to expand...
Click to collapse
Just flash the latest factory image for the international unlocked devices wich is LMY47Z in fastboot, download link https://dl.google.com/dl/android/aosp/shamu-lmy47z-factory-33951732.tgz. Flash radio, bootloader (optional), system, boot and format and flash cache.img.
Hello people ! I'm new in the forum ! from Argentina (I write with google xD translator)
the issue is like this .. I have a galaxy note 8 (n950f) that was root with magisk and xposed .. android u9 ... I got the update and update and at that moment my note 8 DIED !! I am in firmware u10 and it only remains in the GALAXY NOTE 8 logo (it does not start)
I can only enter dowload or recovery stock mode ..
I have the kg state- Prenormal, FRP LOCK off, OEM LOCK off
and doing a combination I can enter factory binary ... but I can't modify anything else to start!
THANK YOU FOR ANY HELP NOW! THANKS A LOT!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Pablin.ros
Do a Factory Reset to get rid of off all the tweaks you made.
jwoegerbauer said:
@Pablin.ros
Do a Factory Reset to get rid of off all the tweaks you made.
Click to expand...
Click to collapse
I did it! but it is still in galaxy logo, I leave it 1 hour like that and nothing ... it seems that it does not take the stock rom = /
Reflash stock files using odin
Solved and fixed by @BIOKNOX
Pablin.ros said:
Hello people ! I'm new in the forum ! from Argentina (I write with google xD translator)
the issue is like this .. I have a galaxy note 8 (n950f) that was root with magisk and xposed .. android u9 ... I got the update and update and at that moment my note 8 DIED !! I am in firmware u10 and it only remains in the GALAXY NOTE 8 logo (it does not start)
I can only enter dowload or recovery stock mode ..
I have the kg state- Prenormal, FRP LOCK off, OEM LOCK off
and doing a combination I can enter factory binary ... but I can't modify anything else to start!
THANK YOU FOR ANY HELP NOW! THANKS A LOT!
Click to expand...
Click to collapse
Solved and fixed by @BIOKNOX
Solved and fixed by @BIOKNOX
Solved and fixed by @BIOKNOX
Solved and fixed by @BIOKNOX
Pablin.ros said:
Hello people ! I'm new in the forum ! from Argentina (I write with google xD translator)
the issue is like this .. I have a galaxy note 8 (n950f) that was root with magisk and xposed .. android u9 ... I got the update and update and at that moment my note 8 DIED !! I am in firmware u10 and it only remains in the GALAXY NOTE 8 logo (it does not start)
I can only enter dowload or recovery stock mode ..
I have the kg state- Prenormal, FRP LOCK off, OEM LOCK off
and doing a combination I can enter factory binary ... but I can't modify anything else to start!
THANK YOU FOR ANY HELP NOW! THANKS A LOT!
Click to expand...
Click to collapse
This same thing happened to me... all I did was to download the original phone software and then refresh with odin
luckily I solve it!
dahvictory said:
This same thing happened to me... all I did was to download the original phone software and then refresh with odin
Click to expand...
Click to collapse
If I did it but mine had another problem, I solve it bioknox editing or modifying 1 system file through team view! I had tried everything already and always solved it like this, with odin, hard reset, twrp etc etc, but this time he had died seriously!
PD : sorry if my English is bad but I write with xD translator jaja.
Pablin.ros said:
If I did it but mine had another problem, I solve it bioknox editing or modifying 1 system file through team view! I had tried everything already and always solved it like this, with odin, hard reset, twrp etc etc, but this time he had died seriously!
PD : sorry if my English is bad but I write with xD translator jaja.
Click to expand...
Click to collapse
Good evening! I have a similar issue with you, meaning that i can`t flash stock firmwares in my N950F Note8. Tried different stock firmwares, but ODIN v3.14.4 failes every time. Tried to flash only PIT file, tried to re-partition, but nothing.
It is still in the samsung screen from bootup, and if charging it shows a charging flash no percentage and not RED Light turned one.
What is different from the thread initiator is the fact that this one has FRP Lock ON and in does not enter in Recovery mode, only in Download mode.
Interesting is that in Download mode, Smart Switch doesnt recognise it, not even emergency firmare recovery.
Do you guys have any other ideas?
Hello everybody,
first of all, I would like to apologize for my English. The Google translator helps me to explain my concern to you.
I know that the life of this tablet is actually long gone, but I would still like to revive it. I don't want to buy a new tablet while it is still working. It should only be used for watching movies and surfing the Internet a little.
I bought the tablet with Android 4.4 back then. During the last update to Android 5.0 it was bricked. A few months later I got it working again thanks to some instructions here. However, I could no longer install an update. At some point it disappeared in the box.
I found it again a few days ago. I tried to install the updates with various instructions so that I can install LineAgeOS 16.0 later. Unfortunately, the same error message keeps coming up when I try to install an update. I do not know how to continue. Maybe someone of you can help me.
I have already tried the following instructions:
1st Link
2nd Link
I wanted to try these instructions, but unfortunately could not find the Intel PhoneFlashTool:
3rd Link
That is the error message I always get.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Greetings - Peter
Have you tried flashing https://dlcdnets.asus.com/pub/ASUS/EeePAD/ME176C/UL-K013-WW-12.10.1.36_KK-user.zip (note: I assume that you are still on Android 4.4)
Hello and thank you for your reply.
It is a bit difficult for me to explain my individual steps because my English is not very good and the google translator sometimes spits out strange cryptic blocks of words.
Yes, i tried this File too. But after flashing this, i get into a Bootloop.
if the tablet does not start and I try to flash this file, I get a bootloop. I also tried to install this File when UL-K013-WW-3.2.23.182-user.zip is installed and started successfully. But even then I get a bootloop.
the only two versions that I can flash that also start without a bootloop are UL-K013-WW-3.2.23.182-user.zip and UL-K013-CN-3.2.23.182-user.zip. But with both versions I cannot install updates. After flashing the version cn, I saw that this is the version for China.
Yes, i am on Android 4.4.2
Is the Error "Unable to find Partition size for '/FWUP'" normal?
Greetings - Peter
cody3264 said:
It is a bit difficult for me to explain my individual steps because my English is not very good and the google translator sometimes spits out strange cryptic blocks of words.
Click to expand...
Click to collapse
What is your native language?
cody3264 said:
Yes, i tried this File too. But after flashing this, i get into a Bootloop.
if the tablet does not start and I try to flash this file, I get a bootloop. I also tried to install this File when UL-K013-WW-3.2.23.182-user.zip is installed and started successfully. But even then I get a bootloop.
the only two versions that I can flash that also start without a bootloop are UL-K013-WW-3.2.23.182-user.zip and UL-K013-CN-3.2.23.182-user.zip. But with both versions I cannot install updates. After flashing the version cn, I saw that this is the version for China.
Yes, i am on Android 4.4.2
Is the Error "Unable to find Partition size for '/FWUP'" normal?
Click to expand...
Click to collapse
It doesn't sound good at least.
I am from Austria. German is my native Language.
cody3264 said:
I am from Austria. German is my native Language.
Click to expand...
Click to collapse
I'm not sure I'm really able to help you (I have no experience with upgrading from Android 4.4) but if it's easier for you can send me a private message in German.
Nobody here who can help me with my problem?
Niemand hier der mir mit meinem Problem helfen kann?
Hello, sorry for necro, but im reviving this tablet aswell, i have the same problem as you, able to install only the one specified firmware and nothing else.
Could you let me know, if you have figured out something?
Thanks!
EDIT:I fixed my issue, checkout the thread i made!