Database Develop

Dust in front facing camera

Hey guys, I'm having a massive problem with dust in my front facing camera. It renders it practically unusable, everything looks white when I switch to the front facing camera.
Any ideas on how to remove the dust? I don't even have any idea how it got in. Best bet is through the ear piece I guess.
Sent from my GT-N7000 using xda premium

not sure if it will help you
but for most of my high end cameras i use a Giottos Rocket blower to get rid of the dust in most parts

Thing is, is behind a glass piece sigh
Sent from my GT-N7000 using xda premium

arghh! this seems very problematic since unless you dismantle the Note, it will be nearly impossible to wipe the dust. Didn't you use a protective cover and screen protection from the beginning or the dust was present the 1st day you got the Note?

Final5k said:
arghh! this seems very problematic since unless you dismantle the Note, it will be nearly impossible to wipe the dust. Didn't you use a protective cover and screen protection from the beginning or the dust was present the 1st day you got the Note?
Click to expand...
Click to collapse
Thats the thing. I dont remember if it was present the day I bought it. Yeah I did use a protective cover. You guys don't have a problem with dust in the front camera?

Maybe it's a fault? Can you physically see the dust on the glass in front of the camera? Mine looks clear like this image:
http://i-cdn.phonearena.com/images/reviews/108271-image/Samsung-Galaxy-Note-LTE-Review-Design-16.jpg
You probably can take it to warranty Samsung service and say it never worked.
I don't use a protective cover and have had no dust issues. I've noticed some dirt/dust getting into the back cover area which i just blow out occasionally. Maybe if you clean/blow out those areas and ports it might dislodge any debris?

rowee270 said:
Maybe it's a fault? Can you physically see the dust on the glass in front of the camera? Mine looks clear like this image:
http://i-cdn.phonearena.com/images/reviews/108271-image/Samsung-Galaxy-Note-LTE-Review-Design-16.jpg
You probably can take it to warranty Samsung service and say it never worked.
I don't use a protective cover and have had no dust issues. I've noticed some dirt/dust getting into the back cover area which i just blow out occasionally. Maybe if you clean/blow out those areas and ports it might dislodge any debris?
Click to expand...
Click to collapse
Yes, I can physically see the dust. The front facing camera is greyed over. Sighh

Well if you're feeling adventurous, you can dissemble the Note yourself and clean it. There are a few tutorials on youtube under "disasemble galaxy note" such as this one:
http://www.youtube.com/watch?v=UFDr3PQMTxw
It doesn't seem that hard and you don't need any special equipment.

This definitely sounds like a clear cut warranty claim case.
Nothing is supposed to be able to enter that little space in front of the camera if the phone has not broken or been broken since day one. Thats my point of view anyway.

rowee270 said:
Well if you're feeling adventurous, you can dissemble the Note yourself and clean it. There are a few tutorials on youtube under "disasemble galaxy note" such as this one:
http://www.youtube.com/watch?v=UFDr3PQMTxw
It doesn't seem that hard and you don't need any special equipment.
Click to expand...
Click to collapse
I followed the video and dissembled the phone. Luckily it all went well and I was able to remove all the dust. The front camera is working perfect now. Thankss!

Julian2103 said:
I followed the video and dissembled the phone. Luckily it all went well and I was able to remove all the dust. The front camera is working perfect now. Thankss!
Click to expand...
Click to collapse
Awesome

Just a generall concern...shouldn't the warrenty cover a scenario like this?

Julian2103 said:
I followed the video and dissembled the phone. Luckily it all went well and I was able to remove all the dust. The front camera is working perfect now. Thankss!
Click to expand...
Click to collapse
I had same problem, and also eventually dissasembld to clean. I did otice (prior to dissassembly) that the glass screen was slightly loose against the chrome bezel at along the top edge (i.e. where the earpiece & front cam are located). pressing on that edge (particularly at the RHS near the cam) there was some "give" - i.e. you could push the glass and it would depress into the bezel by 1mm-2mm and then spring back up.
I suspect that is why dust has ben able to enter. Unfortunately, after cleaning and reassembly, the same "give" is still there. I'd hoped that it was just a badly assembled unit and that it would now be properly sealed, but no joy.
did/does your phone have a similar issue by any chance?
Also, I did the cleanout yesterday, same day as I upgraded to ICS (UK CPW XXLQ2 baseband XXLPT). I'm now noticing terrible wifi/cell radio performance (lost 25% battery in 45 mins just browsing with min screen brightness, lots of wifi dropouts, loads of heat dissipating to rear of case). This in same place (my bed!) as I always surf same sites every morning and where on Gingerbread I'd have no dropouts and my battery drain would be minimal (<5%).
Again, I'm wondering whether ICS is to blame or whether I've somehow messed up during reassembly (maybe poorly reconnected one or more of the ribbon connectors leading to the radio chip?). Have you noticed any difference in Wifi/cellular reception since reassembly?

Battery drain and wifi performance continued to be terrible, so I took it apart again and reassembled once more, this time with greaer care. I think I had done a bad job 1st time round as it's now got much better wifi signal, back to how it was originally.
Battery drain is slightly better too but still much worse than on GB but I think that is just a defect of the stock ICS, just coincience that I did the ICS install same day that Itook the note apart.

Did anyone try to blow out the dust and did that work?
I'm not to keen to pick the phone apart for it.

[Q] Guide: Xperia V disassembly, how to repair broken display?

Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube, but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!

Display removal
grisu59964 said:
Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!
Click to expand...
Click to collapse
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...

display is connected to body with really strong glue. Remember that it is impossible to remove old display without breaking it. Second thing is that with new display the phone most likely will not be waterproof

hakanW said:
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...
Click to expand...
Click to collapse
Hi! I broke mine last night. How did your repair go when the part arrived? I also could only find the russian video without the screen being removed
How hot did you have to make the screen? I was thinking of using an iron with a cloth around it.

Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?

canuck82 said:
Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?
Click to expand...
Click to collapse
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.

Daryl_tt said:
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.
Click to expand...
Click to collapse
I just ordered this: http://www.parts4repair.com/complete-screen-assembly-for-sony-xperia-v-lt25i/ I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...

Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.

Update
Daryl_tt said:
Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.
Click to expand...
Click to collapse
I replaced the screen - had it working for two days and dropped it again - cracked screen, doesn't even light up.
I now have another replacement screen and a better case - at least now I'm getting quicker at taking the phone apart....

screen help
canuck82 said:
I just ordered this: I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...
Click to expand...
Click to collapse
Hi this wont work, I went through the exact same issue, and its impossible to attach the new screen properly. your best bet is to try and find a second hand screen via ebay. it has to have the "housing part with it. otherwise you are wasting your time. it cost me so much to fix mine as I ordered two screens in the end I could have bought a new phone on special....
Try Ebay, and make sure you see the one with the screen and front housing on, I am unable to port the correct link on here as I haven't made 10 posts yet.
Search for the following on ebay : Genuine Sony Ericsson Xperia V LT25i front+digitizer touch screen+LCD display
This should let you find the correct screen
Look at the picture you will see the side housing for the front is also installed, the one you have ordered is the incorrect one as its only the LCD and the Digitzer, without the front housing that it gets "glued" onto. You can see the main difference where the earpiece is its shown as black, hence the mesh is there. that would be the correct one to order. Unless you have the means of getting yours glued back on the same way as the factory, I see you will struggle to get it done otherwise.

Z1 back glass replacement and waterproofness

Since my frame is bent and my back glass is broken I really have to replace them as the dust got between back glass and the camera rendering camera with flash useless.
I'm thinking about replacing it myself, but I'm worried if it's still going to be waterproof after I replace it.
Have any of you guys replaced the back glass by yourself? How's the waterproofness after you did that?

Water resistence will be gone for sure and back glass wont stick for long.time to time you have to push it back.
Sent from my C6603 using XDA Free mobile app

I'm talking about replacing it. Both bent frame and back glass. Have you done this?

No, they will keep the water-proof capablility of the phone. First they will replace the back, remove all the old glue and rubber gasket then replace all with new glue, etc...then use high compression machine press the back cover tight to the glue. Atleast that is the process of replace back cover in my local Sony center, not sure it's applied to all....And after repair they will allow you to put the phone into water to test...

FFS
My adhesive on the back just completely stopped holding the back glass. I can take it out by shaking the device a bit or even by picking it up. I'll be sending it for the repairs...
No more Z1 development, really.

olokos said:
FFS
My adhesive on the back just completely stopped holding the back glass. I can take it out by shaking the device a bit or even by picking it up. I'll be sending it for the repairs...
No more Z1 development, really.
Click to expand...
Click to collapse
That suck! Hope you got the phone without any problems later on...

BlackSoulxxx said:
That suck! Hope you got the phone without any problems later on...
Click to expand...
Click to collapse
Yeah. The worst thing is that I have to ship the phone on my own. I mean wrapping, talking with DHL and stuff like that to get it to authorised sony service ... -_-

Good thing is that although I'll pay a lot for the replacement of the frame and the back it will be waterproof again.
I'll send it in this weekend or at the begging of the next week.

If anyone would be interested in the state of my Z1 then here's what's wrong with it:
USB flap fell off again.
Back glass is broken
Main frame is bent
Middle frame is cracked
To fix it I'd have to buy:
Glue for middle frame, main frame
Back glass
USB flap
Middle frame
I'll propably fix it myself becaus the cost of doing this in the service would be propably as high as a new Z1. Too bad I'm not rich so I can't buy those parts yet.

If anyone is interested then I finally made pictures of my phone. At least the screen and the electronic hardware is allright.
http://imgur.com/a/MRcra?#0

olokos said:
If anyone is interested then I finally made pictures of my phone. At least the screen and the electronic hardware is allright.
http://imgur.com/a/MRcra?#0
Click to expand...
Click to collapse
hope you can get it fixed soon miss your dev work

AnrgKrshn said:
hope you can get it fixed soon miss your dev work
Click to expand...
Click to collapse
Hopefully I will, but I'll have to wait untill all of the parts that I need get available on witrigs.com so I could order OEM parts for my device.

olokos said:
Hopefully I will, but I'll have to wait untill all of the parts that I need get available on witrigs.com so I could order OEM parts for my device.
Click to expand...
Click to collapse
Ah, okay. I've been following you since the Xperia S xD

AnrgKrshn said:
Ah, okay. I've been following you since the Xperia S xD
Click to expand...
Click to collapse
I only had Xperia Play apart from Z1, flashed xperia S just few days ago, lol ^^

I didn't test it myself, but if you buy a genuine back glass assembly (that includes glue, you can buy this from, for example www.witrigs.com) and replace it properly, wait a week or so for the glue to align and stick properly it should still be waterproof. I did replace almost every part of my Z1, that is camera, back microphone, back glass - 2 times, minijack with proximity sensor, battery, main frame with all the buttons and flaps, speaker mesh and propably something else I don't really remember anymore. It doesn't matter anyway, what matters here is that if you replace middle frame - take close attention to the speaker mesh hole - the one from a phone has some sort of a gasket there, whereas the replacement one - doesn't and you can't really buy it separately. I bought the middle frame assembly from witrigs and it was also missing that gasket. Also, speaker mesh from witrigs is different from the one that was in the phone. These parts render my phone not waterproof anymore and I don't think you can buy replacements for it that would still make the phone waterproof, even if replaced with surgically perfect precision.
TL;DR
Back glass assembly (complete genuine replacement part with glue, nfc, camera etc. already on it) replacement, if done properly, may not cause your phone to lose it's waterproofness. At least from my experience.
Replacing main frame and speaker mesh, even new genuine will void it. Not because there were some mistakes in replacing them, they simply don't have all of the elements that the parts originally shipped with a new phone have. Replacing them will definitely remove its waterproofness. (with all parts from witrigs.com, that is very trusted to ship genuine, new replacement parts.
Just posting this so people googling around could find the answer.
//OFFTOPIC
AnrgKrshn said:
Ah, okay. I've been following you since the Xperia S xD
Click to expand...
Click to collapse
Try out my new kernel if you want Make sure to read entire first post before flashing if you are still using XZDR recovery though. http://forum.xda-developers.com/xperia-z1/development/stockbased-ok-kernel-v4-rock-solid-30-t3281806

olokos said:
I only had Xperia Play apart from Z1, flashed xperia S just few days ago, lol ^^
Click to expand...
Click to collapse
I swear I saw you on the XS Carbon Rom forums or something xD I'll give the kernel a shot! Was planning on flashing RR today after a long time on stock, but I guess that can wait

Great, cracked the screen of my Z3 Compact

This morning I was cleaning my phone (getting rid of the finger prints/smudges) while standing up when it slipped out of my hand and hit the tiled floor. Everything is fine except the screen (which is cracked). Screen works fine but is unresponsive no matter where I press or touch the screen. How much does a Z3 Compact replacement screen cost? I searched around and it seems it is about $100?

Screen replacement costs in Poland +/- 135$
(authorised sony service)

Yes' it's hard to get original one cheaper than 100-120$. You can search for some Chinese replacement cause sometimes it looks quite similar to original one but You must check it before buying. Last time I had a client with Z1c replacement screen which he bought for 40$ and there was no white color, everything what should be white was purple.

Voids warranty, cheap replacement
Got mine from here replacebase dot co dot uk (can not post links ), of course you void your warranty if you do it yourself.
Parts are good quality till now. I advice to order a back glass too, I broke mine when taking it out and had to reorder again (costs approx 6 pound).

Next time just heat up back glass with hair dryer and You wont break it.

Chamelleon said:
Next time just heat up back glass with hair dryer and You wont break it.
Click to expand...
Click to collapse
Thanks for the input
The problem was a small crack which did not matter until you have to remove it, you can not pull on it when its cracked. Anyway I will use a hair dryer to put it back together (assemble, heat up, press with books).

Thanks for the replies.
I'll be getting the repair done from the official Sony shop/distributor I bought the phone from. Just wanted to get an idea of how much it "should" cost before I approach them.

m4mbax said:
Thanks for the input
The problem was a small crack which did not matter until you have to remove it, you can not pull on it when its cracked. Anyway I will use a hair dryer to put it back together (assemble, heat up, press with books).
Click to expand...
Click to collapse
Hello
I have tried to change my backglass 3 times but after a few hours the glass falls off... (Yes, I cleaned the phone removing all the old adhesive - and yes, I had pressure on it over night ) But all the instructions I have found on the internet never mentioned anything about putting the glass on, and HEATING it up, and the putting pressure on it... Where have you found that advice? You could imagine that heating up would ruin the adhesive/making it thinner and thereby not waterproof...? But on the other hand your succesrate probably beats mine...

Foxhunter123 said:
Hello
I have tried to change my backglass 3 times but after a few hours the glass falls off... (Yes, I cleaned the phone removing all the old adhesive - and yes, I had pressure on it over night ) But all the instructions I have found on the internet never mentioned anything about putting the glass on, and HEATING it up, and the putting pressure on it... Where have you found that advice? You could imagine that heating up would ruin the adhesive/making it thinner and thereby not waterproof...? But on the other hand your succesrate probably beats mine...
Click to expand...
Click to collapse
I think it was a comment below the iFixit tutorial. But one big warning here, I did extra maximally stupid and put it to 'press' under my table (with books around it). The table was too heavy and cracked my front screen once again :crying:
+ The rear glass sits fixed and has not loosened.
- Don't put too much pressure or you destroy it yet again like stupid me

m4mbax said:
I think it was a comment below the iFixit tutorial. But one big warning here, I did extra maximally stupid and put it to 'press' under my table (with books around it). The table was too heavy and cracked my front screen once again :crying:
+ The rear glass sits fixed and has not loosened.
- Don't put too much pressure or you destroy it yet again like stupid me
Click to expand...
Click to collapse
Doh!!! ? I have also read on Ifixit and can see there are different opinions about if it is nessesary to heat or not. But I think I will follow your advice and heat the new back before putting it under (less pressure) ?.
Another thing I read on Ifixit is that someone writes that you should put on an adhesive sticker - eventhough the new back comes with adhesive already on...? What is your advice on this?

Most pre-glued adhesive stickers on back are useless. Now everytime I change back in Xperia Z, Z1, Z2, Z3 and compacts I need to remove pre-glued sticker and change it to original one. Many times I had complaint on it from my clients saying that back glass came off. So it's better to order original back glass or just original adhesive.

Foxhunter123 said:
Doh!!! I have also read on Ifixit and can see there are different opinions about if it is nessesary to heat or not. But I think I will follow your advice and heat the new back before putting it under (less pressure) .
Another thing I read on Ifixit is that someone writes that you should put on an adhesive sticker - eventhough the new back comes with adhesive already on...? What is your advice on this?
Click to expand...
Click to collapse
Good
Mine came with the adhesive ON the screen, I used that one, I didn't have a separate one. Be extra careful when 'placing' the adhesive where it belongs because you can not remove it once place (okay maybe slightly). Its important that it fits on the first to first and a half try. More adhesive means thicker layer --> glass will stick out
Anyway, most of the stories you read online are partially BS, the phone will work even when the glass is a tiny bit loose or when the adhesive rotated and is a bit thicker in one place. In my eyes, when you dared to order, you are very much capable of assemble the parts.
In btw, ordered new glasses today, hope my two left hands fix it this time.
PS: A lesson I learned on a friends Galaxy S2, do NEVER EVER try to use force when something sticks or is not as loose as in a video. Google or ask another person maybe you just dont do the trick. A connector didnt want to come off so we used a lever to lift it, CLICK, the place where the lever levered broke the board... :silly:
Edit 1: I think its not necessary to HEAT it, it just has to be a lil bit warmer than in your pocket or when calculating heavily. 30s under a hairdryer will be more than enough i guess.

Forgot to update this thread. I received my fixed phone last week. They replaced the screen and even the "bumpers" around the phone for $98. They even delivered the phone to my home free of charge. Looks brand new, all the minor dings I had on the phone are gone.
On another note, I also bought my first iPhone. Got an Space Gray iPhone 6s 128 GB with the official/Apple leather case for the 6s. Got it last Thursday. Been playing around with it a lot and, overall, I love it. Deciding on whether to keep my Z3 Compact as a back-up phone or just sell it. But geez, does the iPhone 6s load games and other apps fast (thanks to its NVMe storage).

My Z3 compact screen is falling out

So I like just about everything about the Sony Z compact line of phones but durability wise I have been unlucky. My first Z3 compact died from water damage and my 2nd one has a screen that is ready to fall off the device.
I choose to buy a HTC U11 to replace my Z3 compact as I have never owned a HTC phone before and thought I would try something different.
What I would like to ask here though is it worth trying to fix the Z3 compact to sell or not?

The only way to protect this phone:
The phone bends 0.1mm causes the phone screen to start opening. So it's not suitable for jeans pockets.
I remedied this by using an anodized aluminium bumper and tempered glass both sides.
Sony does a very bad repair of it's phones, and the issues will return, and their parts are expensive.
It is better to do it yourself and use B7000 glue, use plenty, easily removable for future repairs, no heat, clothes pegs, wait 48 hours before removing pegs or turning on the phone. And look for the best grade of screen with frame, Sony uses two manufacturers for its screens.

My Z3C has a screen that is lifting. This thread and others seem to indicate that fixing the screen is not hard but hardware is not my thing at all...
Would a phone repair place (in a shopping centre) be able to do this kind of repair? Is the phone much different to other phones that people would take in for screen replacements?
I don't care about the loss of waterproofing. The screen isn't even falling out, just lifted in the corner. I don't want to send the phone anywhere and be without it, or have it come back changed in unexpected ways...

a1291762 said:
My Z3C has a screen that is lifting. This thread and others seem to indicate that fixing the screen is not hard but hardware is not my thing at all...
Would a phone repair place (in a shopping centre) be able to do this kind of repair? Is the phone much different to other phones that people would take in for screen replacements?
I don't care about the loss of waterproofing. The screen isn't even falling out, just lifted in the corner. I don't want to send the phone anywhere and be without it, or have it come back changed in unexpected ways...
Click to expand...
Click to collapse
Phone shops including Sony themselves have difficulty in repairing this particular phone, I think any phone shop can do this repair, but, they must use the B7000 glue or similar, or silicone, and not the red tape they usually use, it's useless, as this phone can heat up, or the blue z3c ready cut tape is not so good either. And if you get the wrong screen (clone), the colours will not be as good.
Many phone repairers have the clone screens that are thicker than the original.
The screen sometimes is actually bent, along with the body, check on a flat surface.
Always buy a good screen together attached with the body, and never by itself.
So armed with this knowledge and or hardware, you could go talk with a phone repairer... The first 3 times, shop, but maybe the fourth repair, try doing it yourself, it's as easy as opening a PC, just smaller, just follow z3c repair guides and youtube, when you're ready. When attempting to repair the phone, for the very first time, do it over hours, maybe over the weekend, and not one sitting.
If you start loosing patience, leave it for a while etc.
[emoji12]
I got so comfortable with opening my phone, I put extra 0.3mm copper plates on the processor and gpu with Cooler Master Extreme Fusion paste etc. Lol.
But it's good to have an already damaged motherboard to work on.
Z3C LOS Omni Oreo

My screen is still working fine. Just lifting.
I do have some old phones I could practice on, assuming they have the same glass sandwich construction.
I will go look for some videos...

a1291762 said:
My screen is still working fine. Just lifting.
I do have some old phones I could practice on, assuming they have the same glass sandwich construction.
I will go look for some videos...
Click to expand...
Click to collapse
?
Z3C LOS Omni Oreo

I put up with my screen for a long time but eventually the glue gave out and I had no choice. It was good, then bad, but ultimately ok.
I didn't have any trouble taking the glass off the first time because the glue was barely hanging on. I had a look and noticed that the headphone jack's glue was also failing. Probably why it was becoming unreliable. I glued that and reseated the screen cable and it worked fine while sitting there so I glued everything on again.
It was a poor first attempt. I had both too much glue (blobs that leaked out) and not enough to actually seal around much of the screen. No problem. I took the glass off again and glued it again. This time I followed the instructions closer and glued the front screen before connecting the ribbon.
The second gluing was good but something with the ribbon was wrong because it only worked when I pressed on the lower part of the screen. Sigh.
Taking the glass off after a good glue was much harder. I finally got the spudger under the glass but I moved it sideways before removing the suction thing. It was too much pressure for the glass. The good news is that it was the rear glass and only the bottom half shattered. I got the rest off and started on the front.
Now that I knew to be more careful, I got the front off OK. Reseat. Test and working. I glued the front on first again, without disconnecting the cable. Tested and working. I glued the half back I had on (covers the camera).
Its working!
I use a case so the back isn't even a problem, but I ordered a new back from China (cheap). The headphone Jack seems better. I put a new screen protector on. In some ways the phone is rejuvenated.
I was apparently not careful enough when taking off the screen though. I appear to have some marks on my screen now. It's minor, probably won't notice during normal use, but there if you look.
I'm so glad to have my phone back. I've been using an iPhone for the last 3 weeks.
Thanks for the tips.
Edit: The hands free speaker works again too. Bonus