Screen sometimes turns itself off although set to never - LG Watch Urbane

Hi all
I got my urbane last week and everything has been great so far. I did initially have a bit of problem with the wifi and had to do a hard reset. I have turned that off now and just use Bluetooth. The bluetooth range in my house isnt much different to the wifi anyway so not a big deal. The battery lasts two days with ambient mode always enabled which I think is pretty good by smart watch standards. .
The problem I have is sometimes the screen just goes black. Tapping it wakes it up but I have it set to never sleep and its happened three times today. I know it turns off when it's been sat down untouched after 30 minutes or so but its been doing it whilst on my wrist. I'm using pujie black as my watch face so wonder if it something to do with that. Has anyone else had similar and managed to solve it?
Cheers

I am encountering the same issue since I updated to LCA44B OTA and I have found no solutions to this point. Pretty annoying since everything was working back then

Mine will only turn off after long time of not moving, seems about 30 minutes
as long as I keep doing things and moving my wrist, the screen will not turn off

the screen does this when it detects no motion for like 5 or 10 minutes, its normal.

If it's on your wrist it should be fine but if left unmoved for about 10 minutes it will turn off to black screen. This can be affected if using some "3rd" party screens from Watchmaker or Facer as some of these faces can have little "bugs" that affect the "never off" setting and can - repeat can - turn screen to black even when wearing the watch. (I have only come across this a couple of times and have reported the situation to the respective "face" designer).

Related

Screen Alignment

Hey guys. By now, I'm sure most of you are probably familiar with the screen alignment issue (where, sometimes when you go to click on something, it clicks something above or below and is about 1/3 of an inch off).
Well, I've noticed something on my device and was wondering if anybody else has had the same experience. If I have the screen brightness all the way down, I can use the screen for quite some time before this happens. Then, I just hit the power button, put it to sleep, and then wake it back up and the problems corrected. What's weird is, if I have the brightness all the way up (like when I'm outside on a sunny day), it takes far less time for the misalignment issue to show it's ugly face.
Basically, what this says to me is that it might be related to a heat issue from the screen itself. Just wondering what everybody else has noticed.
Mi|enko said:
Hey guys. By now, I'm sure most of you are probably familiar with the screen alignment issue (where, sometimes when you go to click on something, it clicks something above or below and is about 1/3 of an inch off).
Well, I've noticed something on my device and was wondering if anybody else has had the same experience. If I have the screen brightness all the way down, I can use the screen for quite some time before this happens. Then, I just hit the power button, put it to sleep, and then wake it back up and the problems corrected. What's weird is, if I have the brightness all the way up (like when I'm outside on a sunny day), it takes far less time for the misalignment issue to show it's ugly face.
Basically, what this says to me is that it might be related to a heat issue from the screen itself. Just wondering what everybody else has noticed.
Click to expand...
Click to collapse
Yes I have notice it too with the same setting but didn't think much of it and just put it to sleep and woke it up and worked after that.
dont know if its a heat issue, my phone is always on 0% brightness and it still randomly happens.

Random problem - Screen not turning off

Hi,
Since upgrading to Tizen a couple of weeks ago, I've had a couple of occassions where the screen has stayed on and not dimmed or turned off.
I only notice it because I get the low battery warning and think it shouldn't be dead so quickly. I then watch it for a bit and notice that it doens't dim or turn off. Changing the screen timeout from 10s to something else and then back doesn't make any difference.
A reboot lets the screen timeout work as normal again.
I probably looked at the watch a few times whilst it was stuck on and just thought that it had been triggered by the movement sensor.
Anyone else have this problem?
Didn't have this problem under Android (had the watch since November last year)

[Q] Screen doesn't stay on anymore

When I bought the watch back in November, the screen would stay ON all the time. I know it to be a fact because I used to leave it on a desk without ever touching it (for hours) and it would always display the time (it was like having a desk clock, for when I would rather not wear it to have more comfortable wrists while writing or that sort of things).
Also in the train (I used to travel a lot in that period) I would leave the watch hung on the wall while sleeping (at night) and it would not turn itself off, so I could check the time in case I woke up in the middle of the night, without neededing to reach for the watch.
Recently (it was January) I noticed that it does not work like that anymore. After a very short time, the watch screen goes off. It is still in standby: it goes back on if I touch it or press the button.....but I want it to stay on 'without limits' (in dimmed mode). It was like that before.
Somehow this is the behaviour of the 'keep screen always ON' setting.....but in fact, that setting is already set to 'ON'.
So is there some kind of firmware update that changed this behaviour? I would like the clock to not go off when it is not on my wrist, sometimes I just need to keep track of time AND have my wrists free....and it is not possible anymore.
nothing?
It is actually a key feature....no point in having a watch that doesn't show the time unless you touch it (if you leave it on a desk or simply hung on a wall at night). Also I wonder why it changed (did not do this last year so I thought it must be some update but could not find anything in the changelogs about this).
You have the Setting enabled in Android Wear for keeping the screen Always On?
My screen only goes out when on the charger. When I had a Samsung Gear Live, it would stay on while on the charger, via the Developer Setting on the watch to keep the screen on while charging. But that has never worked for me on the "R", not even last year.
The screen of the watch goes off while charging (although I remember it being different back in October...).
The settting for 'screen always on' is activated. I activated from the watch, from the phone, restarted the watch, nothing worked. The screen goes off after a while IF I DO NOT wear the watch.
No problem if I wear it....that means there is some connection between the screen going off and the accelerometer :-/
But as I said, I need the watch to stay on even if I am not wearing it (working at a desk or similar when I can't wear the watch, I would look at the time at the watch lying on the table). I am sure 1000% it did not turn off before (started in January, or at least I noticed it in January). I read all the changelogs for all the updates and I did not find anything about this.
Can someone also try? My brother has the same watch and his also goes off if he does not wear it. I find this really unneeded. At least they should have put a setting available.
You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk
Darnell_Chat_TN said:
You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).
rogermorse said:
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).
Click to expand...
Click to collapse
I've had my "R" since last year, before v5 came out for the watches. And the "R" never kept the screen on while charging. I never noticed it involved simply not wearing it. Since when I'm not wearing, I'm charging.
Sent from my Nexus 10 using Tapatalk
Screen shuts off completely
The screen on my GWR has started shutting off, completely dark not dim. I checked the settings and it is set to "Always on screen": ON.
This is a fairly new problem, it did not used to behave this way, I could see the screen dim, and move my wrist and it would go bright and display "OK Google".
Any ideas on how to fix this bug? Or do I/we need to wait for a software update/fix? Current software version: 5.0.2
Watch is not very useful if I can't see the time without having to push the crown/button.
Anyone else having this issue?
Screen is working again.
Had some time to try some options, did a "Reset Device" and the screen came back.
Lost all the apps I had loaded on the watch, not a big deal, wasn't using many of them.
Guess I can just download them again from the play store, if I want them back. Something I loaded onto the watch may have caused the loss of the screen.
Last couple of apps I downloaded were CompassX and a charging app that shows charging progress while charging.
Glad to have the watch face back.
I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?
2leaponover1 said:
I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?
Click to expand...
Click to collapse
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.
2leaponover1 said:
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.
Click to expand...
Click to collapse
The user support for this watch is non-existent Still no help with this problem
2leaponover1 said:
The user support for this watch is non-existent Still no help with this problem
Click to expand...
Click to collapse
I confirm that I have this trouble also in normal use, previously it worked fine and would stay on all the time if that's what I wanted.
Am very tempted to reset the watch after backing up.
I have nearly the same problem. For months now, when my screen dims, it goes to a very dark/dim red. I've removed all programs from my phone and did a factory reset on the watch three times. I'm not sure what else to try. Is there a way to flash the memory? It seems like a setting is stuck in the non-volatile memory.
I was having the same problem and found that I had theater mode set on. Switched to off and now works great.
Sent from my Nexus 6 using Tapatalk
Check your theater mode setting.
Turning mine off worked.
extrabilly said:
Anyone else having this issue?
Click to expand...
Click to collapse
I'm experiencing the same. On my watch it seems to be somehow related to accelometer. Almost everytime, when using LG G Watch R in golfing, it starts to shut down the screen. It doesn't wakeup even when tapping the screen.
I haven't found other solution than resetting the device
Same issue with 5.1.1
I had this issue with 5.0.2 and hoped that the next update would solve it but sadly it persists in 5.1.1 .
Theatre mode is off, Always on is on but still the screen blanks, showing the ambient mode screen briefly before blanking.
I've reset multiple times, occasionally Always On comes back but only for a short while.
Always on is a feature I really like
Fixed it on mine
I had to turn wrist gestures on. With it off screen on doesn't work.
I have the exact problem on my GWAR, software version 5.1.1. I bought my in December and it never happened until now. It started happening yesterday all of a sudden. I tried factory reseting it through bootloader, throught settings, uninstalling the Wear app, uninstalling the watchface i was using, and still nothing.
Here is what I did to fix it (and i know its overkill): Uninstall Wear app, clear google play services data and reset the device through settings. Now it's finaly working.

screen randomly wakes up

My device is completely stock.
I have noticed that the screen will randomly wake on its own to the lockscreen.
If i get a notification it does this however will also do it with nothing apparently new having happened.
Any ideas?
I noticed this before on my P9-L:ite but haven't seen it yet on my P10. In my case, I believe it happens when the phone loses or regains internet connectivity. Since networks are kind of spotty where I am, it happens somewhat often.
i have the p10 plus and i have the same situation...... any solutions?
Mine only does this when receiving a snapchat from someone. Could it be app related?
My one week old P10 plus has the same problem. It happens when I lock the phone while any app is active (I tried with a few apps). However, it doesn't happen when I lock the phone while the home screen is active.
Has anyone found a solution?
Still interested in this–
started happening to me a few days back aswell; I noticed the change after shooting some balls with my phone in the pocket, screen facing the skin. At some point the phone got insanely hot. When I picked it up all sorts of s*** happened, as if my thigh was able to make touch inputs through the pants? Notification center / quick settings were all toggled randomly. Flashlight, geo location and hotspot were switched on whereas Wifi and Bluetooth were off (which is unusual). And the camera was running with fully brightened screen, which I think was main reason for the heat.
I wasn't sweating extensively; meaning the phone wasn't wet in my pockets or something–
And I don't know if the random screen wake up enabled my thigh to make the touch inputs or of something else happened which from then on let the screen randomly wake up– chicken and egg, you know :F

Galaxy s10 screen wakes / turns on on its own... annoying bug

I've searched far and wide and can't find a solution for this issue.
Here is what happens: for no reason that I can see (no new notifications), my screen turns on its own. My phone is just there on the table when this happens and I haven't touched it.
This happens whether the phone is plugged in or not. It happens in the middle of the night and wakes me up.
Things I came tried:
- turn on do not disturb and remove all exceptions.
- disable always on display.
- disabled all lock screen notifications.
- disabled a notifications.
Other things I've tried:
Lift to wake and all other things that could wake the screen.
Did a factory data reset and re setup my phone from scratch.
Nothing works. Can anyone please help me?
Thanks in advance.
I had the very same problem until a few days ago when this behaviour suddenly stopped. What changed? I had shutdown my Pebble watch and connected a Wear OS watch to my phone.
I don't know what the Pebble did, but it looks like it woke up my phone at random intervals.
Maybe it a bluetooth device you've connected?
I'm expeciencing sometimes this behaviour when listening to the music on bike with phone in pocked on back. I disabled all "smart" funcions like smart lock, pocket detecting, wearing detection etc and it stopped.
I think it is caused by new type of proximity sensor used in whole S10 line (so I think it is hw related). I read somewhere than it detects skin proximity even thru several layers of cloting.
It is behaving strange even during phone calls - when put phone down from my ear, it tooks several seconds until screen lights on.
it's one of the things that bothers me a lot about otherwise great phone.
facing same issue
I always loved Samsung galaxy s10. I bought it from my friend who used it for 10 months. I am facing the same issue first I thought it is because he used it for 10 months and some bug appeared but now I came to know its not just me. if anyone knows how to fix it then please post a reply. I really need to fix this
I haven't noticed that on my S10. It sounds like something is triggering it, but what. Do all of you use Bixby because I don't.

Categories

Resources