Stuck on factory reset 2 and get a dload error - Sprint LG G4

So appearently when i tried to flash the unoffical frimware it flashed but rebooted to factory status 2. Now i cant boot into android at all and whenever i try to flash the Anroid M frimware it gives me a _prepareafterDload error 0000054 . Can someone please help me restore it to ethier Lolipop or Marshmallow??

Awesomeslayerg said:
So appearently when i tried to flash the unoffical frimware it flashed but rebooted to factory status 2. Now i cant boot into android at all and whenever i try to flash the Anroid M frimware it gives me a _prepareafterDload error 0000054 . Can someone please help me restore it to ethier Lolipop or Marshmallow??
Click to expand...
Click to collapse
I was also stuck on factory status error 2. You should try TO TOT zv6. The way i was finally able to get things running was first i connected my phone to a different usb slot on my computer.
Then while using the LG flash tool I also switched to Board DL instead of Upgrade DL
your phone will reboot to the AAT Screen – Click OK (Yes, it says not to), then hold down power and press normal boot (+power).
Your phone will reboot and all should be well.

tallblazer124 said:
I was also stuck on factory status error 2. You should try TO TOT zv6. The way i was finally able to get things running was first i connected my phone to a different usb slot on my computer.
Then while using the LG flash tool I also switched to Board DL instead of Upgrade DL
your phone will reboot to the AAT Screen – Click OK (Yes, it says not to), then hold down power and press normal boot (+power).
Your phone will reboot and all should be well.
Click to expand...
Click to collapse
So i can downgrade to zv6 with this one?
Heres the lg flashtool log
http://pastebin.com/T3mpRd8Q
Can someone help me please?

Awesomeslayerg said:
So i can downgrade to zv6 with this one?
Heres the lg flashtool log
http://pastebin.com/T3mpRd8Q
Can someone help me please?
Click to expand...
Click to collapse
I dont think this has been proven yet. I think you will be stuck on android M until a method is figured out. I thought you were just was trying to TOT from zv5 or zv6.

tallblazer124 said:
I dont think this has been proven yet. I think you will be stuck on android M until a method is figured out. I thought you were just was trying to TOT from zv5 or zv6.
Click to expand...
Click to collapse
No i mean i cant get into the android itself it just resets shows the minios logo and then says Factory Reset 2.

Awesomeslayerg said:
No i mean i cant get into the android itself it just resets shows the minios logo and then says Factory Reset 2.
Click to expand...
Click to collapse
If you were on zv5 or zv6 follow my steps in my first post.
Sent from my LGLS991 using Tapatalk

tallblazer124 said:
If you were on zv5 or zv6 follow my steps in my first post.
Sent from my LGLS991 using Tapatalk
Click to expand...
Click to collapse
nada get a _preapreafterdload failed error... Sigh i guess ima have to ship it to lg.. I need it in about 2 weeks..

Can you boot into recovery? If so you may be able to adb sideload a factory image to get function back

danweb66 said:
Can you boot into recovery? If so you may be able to adb sideload a factory image to get function back
Click to expand...
Click to collapse
Do you know what the keys are to access it

Awesomeslayerg said:
Do you know what the keys are to access it
Click to expand...
Click to collapse
With the phone powered off, hold down vol down and power till the screen says recovery.
Sent from my LGLS991 using Tapatalk

Swetnes said:
With the phone powered off, hold down vol down and power till the screen says recovery.
Sent from my LGLS991 using Tapatalk
Click to expand...
Click to collapse
Yeah dosent work looks like recovery is gone as well

Related

Droid 3 Stuck at M Logo - Bricked?

Hey guys,
I just recently got a refurb Droid 3 after my old one had the backlight go out, I hand't had a chance to bootstrap it and put ICS on it. But I was able to get it rooted. I restarted my phone today and ever since it has been stuck at the M logo screen and I've tried everything I can find to remedy this.
I updated this morning to the most recent OTA update (5.7.906 I believe) and then rooted it.
To fix the issue I've tried a few different things. I tried Pete's SBF to 5.7.890 but I was getting an error about the cbt.bin file. I found that with the recent changed to 5.7.906 you aren't able to directly flash over it to go back to 5.7.890. I then found another post on here which had a script to go back to 5.7.890 from 5.7.906. I ran that and still had the same result.
Any other ideas or anything that I am missing?
I can get into fastboot, I've been using the scripts with moto-fastboot. Normal boot is just leaving me at the M logo, booting into recovery yields the same result.
Any help would be appreciated since I have no clue what else I can do at this point...
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
I don't have a BT Tools selection. I do have BP Tools though. I selected it and it just sits there on the M logo as well...
I've tried a few of Pete's scripts with no luck so far (worked on the old Droid 3 when I put it back to stock before shipping it back).
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
imperpetual said:
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
Click to expand...
Click to collapse
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Juicy555 said:
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Click to expand...
Click to collapse
It is charged. When it's not charged it gives the "LOW BATTERY" error.
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
ovelayer said:
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
Click to expand...
Click to collapse
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
imperpetual said:
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
Click to expand...
Click to collapse
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
ovelayer said:
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
Click to expand...
Click to collapse
I'm fairly certain that could work, if I could ever get into the Stock recovery....I'm not able to boot into anything. Going to try a few other things, if nothing else works I'll just take it in and see if I can get yet another warranty replacement.
Thanks for the responses, if you have any other ideas just let me know.
I think the main thing that needs to be addressed is that I need to be able to get into recovery and then I will be set to fix it. Right now it just sits at the M logo for Recovery (and any other options from the boot menu).

[HOWTO] Upgrade to marshmallow, dowgrade to ZV6, and Fix Status 2

Well guys i was having problems as most of you guys saw on the the unoffical TOT thread but thanks to @autoprime for mentioning LG UP i was finally been able to get past status 2
Disclaimer:
I am not responsible with what happens to your device when using this program.
DO NOT TRY TO FLASH BACK TO ZV5/ZV4 OR YOU WILL BRICK YOUR PHONE.
ATTENTION: DO NOT TRY TO FLASH BACK FROM ZVB TO ZVA OR BELOW BECAUSE OF A NEW ANTIROLL BACK PATCH.. AGAIN IF YOU DO YOU WILL BRICK YOUR PHONE
Requriements:
-LG UP: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
- TOT Files:
Android Lolipop 5.1 ZV6 - http://forum.xda-developers.com/sprint-g4/development/restore-sprint-lg-ls991-zv6-tot-t3213196
- Micro USB cable from phone to pc and Drivers: http://forum.xda-developers.com/g4/general/lg-g4-drivers-t3127648
Steps to downgrade
1. First download and install LG UP from the thread BOTH MSI files.
2. Now put your phone into download mode via holding down the volume + and plugging it in to the usb.
3. Fire up LG UP and at first it may say UNKNOWN on the window so what you wanna do is disconnect and reconnect wait a few seconds and it should work.
4. Now it should say LS991 and select it and click ok
5. Now on the window select your ZV6 TOT FILE and select UPGRADE
6. On the bottom of the window there should be three dots click on them and find your tot file.
7. Click start.
8. After that your phone should start progressing
9, Should restart and work.
10. If it dosent make sure you factory reset!! (Hold down volume down and the power button and power then go the factory reset and wipe it)
To fix status 2 error
Thanks to @autoprime
1. flash zv6 and get stuck at blue screen.
2. power off phone and close lgup.
3. boot into download mode again.
4. this time.. instead of using LGUP.. use LG Flash method.
5. make sure you set LG Flash to use "Board DL" at the bottom of the screen where u select dll and tot.
6. should be able to flash either zv6 or zv9 using LG Flash (with Board DL option).
Glad you finally got it figured out...I must have gotten really lucky as I also got the dreaded 2 the first time but after uninstalling and reinstalling everything I was able to get around it...I am bookmarking this for future reference. Thanks again for your and @autoprime work.
Sent from my LGLS991 using Tapatalk
Thank you! You are a savior! I'll try to do it once I get home and update my post.
Finally, a sigh of relief. My phone is back from the dead!
Just tried this and it still didn't fix status 2. I get the error, but instead of continuing on the phone, it stops. It just hangs at 0%. I guess I may be sending this phone into LG (praying that they will fix it). I cannot afford a new one.
I have status 2 still.
ironbesterer said:
Just tried this and it still didn't fix status 2. I get the error, but instead of continuing on the phone, it stops. It just hangs at 0%. I guess I may be sending this phone into LG (praying that they will fix it). I cannot afford a new one.
Click to expand...
Click to collapse
Weird well I DONT remember what I exactly did sorry guys
Got my phone working did the steps 1-7 above but used zv6, then I went back to the flash tool and used the zv9 tot, board dl and it went through swimmingly.
Im going to update everyone that you CANNOT FLADH BACK TO Z5 OR ELSE YOU WILL BRICK YOUR PHONE!!
Where does the ZV9 tot file come from?
just got the ota notice this morning. i assuming its MM. is it pretty simple to downgrade back to zv6 (what phone came with stock). u have used lg up for fix bad flash but not comfortable with the lg flash method. aka open a comand window in lg root folder (method) is there a another flash method in case i get this "error 2"
thanks in advance.
So, tried downgrading to ZV6 from ZV9 and get stuck on Sprint boot image looping. Any suggestions on how to get it to boot correctly?
Has anyone successful downgraded back to ZV6 from ZV9?
Awesomeslayerg said:
Im going to update everyone that you CANNOT FLADH BACK TO Z5 OR ELSE YOU WILL BRICK YOUR PHONE!!
Click to expand...
Click to collapse
So to be clear did you had ZV9 and did a successful downgrade to ZV6 using your steps??
Well, yes, kind of painful since I got stock on the Sprint Spark boot image (no boot loop, just the image) . So the painful part is that I needed to do a factory reset from factory recovery (lost everything )... but it then went ok.
surge27 said:
So, tried downgrading to ZV6 from ZV9 and get stuck on Sprint boot image looping. Any suggestions on how to get it to boot correctly?
Click to expand...
Click to collapse
Factory reset
Awesomeslayerg said:
Factory reset
Click to expand...
Click to collapse
That did it. Can confirm it works, followed all steps in the downgrade section and effectively it got stuck on the Sprint Spark image, had to go into recovery mode, select wipedata/factory reset and reboot phone. Im back from ZV9 to ZV6.
Awesomeslayerg said:
Factory reset
Click to expand...
Click to collapse
Worked for me too...on ZV6 now and going back to UltraPop.
Already have stock mm. Can I still root it? Where do I go? I'm fine with zv9. Or has root not been figured out yet..
worked. downgraded stuck on spark, then factory reset. working and updating as we speak
thank you
I have been able to flash back wards and forth using both flashing tech. Using LG UP and the old flashing way. Don't know why it worked but it did. Also pulled out as soon as the phone hit 100%.

LG G4 H811 (T-Mobile) bricked

Good morning,
I recently decided to attempt to root my LG G4 and install a custom ROM. I was able to unlock the bootloader and boot TWRP, but at this point I received an error when I tried to install the Cyanogenmod ROM that I had downloaded.
At this point, my phone is a brick. If I turn it on normally, the LG screen comes up and stays. There is a message in the upper lefthand corner saying that the bootloader is unlocked.
I am able to boot into download mode. I have tried using LGUP and the LG Flash Tool 2014 to flash the original kdz but I get connection errors with both approaches.
Any ideas what my next course of action should be?
Thanks in advance!
Mine is doing the same thing and I am getting errors on 9% on both versions of tools version 2014 and 2016. No one has an idea why? I have done this unit before what out any problems!
Use lg up and the newest kdz (20o). Manually enter download mode and then start lg up. Also you might have to download and install lg drivers onto your PC.
Sent from my LG-H811 using Tapatalk
dtomlin said:
Use lg up and the newest kdz (20o). Manually enter download mode and then start lg up. Also you might have to download and install lg drivers onto your PC.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
This is what solved the issue for me. I simply had the wrong KDZ. The 20o is the one I needed.
My lg g4 got the fault in the system where it stuck in the bootloader and all I did was us lg up and kdz 10n and the phone didn't boot but I was able to return it and get a phone because when you do that your deleted everything off it and making it to where it was when it came out of the box
dtomlin said:
Use lg up and the newest kdz (20o). Manually enter download mode and then start lg up. Also you might have to download and install lg drivers onto your PC.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Well I tried using the 20o but it is still stuck on logo. Followed your steps but unfortunately it didn't work for me.
Sent from my iPhone using Tapatalk
otto68 said:
Well I tried using the 20o but it is still stuck on logo. Followed your steps but unfortunately it didn't work for me.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
you may have the infamous bootloop if you dont know do a search lg g4 bootloop... if so you must sent it to LG theres no way to fix it only LG.
mikespan said:
Good morning,
I recently decided to attempt to root my LG G4 and install a custom ROM. I was able to unlock the bootloader and boot TWRP, but at this point I received an error when I tried to install the Cyanogenmod ROM that I had downloaded.
At this point, my phone is a brick. If I turn it on normally, the LG screen comes up and stays. There is a message in the upper lefthand corner saying that the bootloader is unlocked.
I am able to boot into download mode. I have tried using LGUP and the LG Flash Tool 2014 to flash the original kdz but I get connection errors with both approaches.
Any ideas what my next course of action should be?
Thanks in advance!
Click to expand...
Click to collapse
Message tungkick. He fix ANYTHING. He did mine. Mine was just like yours. He fixd it in ten minutes(from his computer)
Hit thnx if this helpd
otto68 said:
Well I tried using the 20o but it is still stuck on logo. Followed your steps but unfortunately it didn't work for me.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
One small thing you might want to try first. Open LGUP with your phone connected in download mode. Choose the kdz file you want to use, then CLOSE LGUP (leaving the phone connected). Then reopen LGUP and the kdz file should still be selected. Then click Start.
mikespan said:
Good morning,
I recently decided to attempt to root my LG G4 and install a custom ROM. I was able to unlock the bootloader and boot TWRP, but at this point I received an error when I tried to install the Cyanogenmod ROM that I had downloaded.
At this point, my phone is a brick. If I turn it on normally, the LG screen comes up and stays. There is a message in the upper lefthand corner saying that the bootloader is unlocked.
I am able to boot into download mode. I have tried using LGUP and the LG Flash Tool 2014 to flash the original kdz but I get connection errors with both approaches.
Any ideas what my next course of action should be?
Thanks in advance!
Click to expand...
Click to collapse
Have you try booting into download and open LG Bridge, software update and follow the steps it tells you?
Mine randomly restarted and entered a boot loop on the way into work today. I couldn't enter recovery. I just let it loop. When I checked it when I got to work about 30 minutes later, the screen was dark and I figured it had died. It was booted to my lock screen. The weird part is that all of my "recent apps" were still open. I'd taken the battery out several times. It now reboots without issue. Perhaps I slipped into an alternate universe where my phone didn't die on the way to work. #mandellaeffect
dtomlin said:
Use lg up and the newest kdz (20o). Manually enter download mode and then start lg up. Also you might have to download and install lg drivers onto your PC.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Hello,I got trouble connecting the LGUP. It tells me the device model is unknown so I can't choose it.I guess it's because I edited the build.prop:crying: Could you tell me how to rescue my phone?

I cannot upgrade any further

Hello,
I tried for a few days to upgrade my huawei to build B586 but I haven't been succesful. I unlocked my boot and tryied to upgrade trough brick method(but switching the img files to the b586 ones with huawei extractor). I have no option to update from local and the vol+,- and power buttons do not work. I get stuck at boot screen.
My curent build is B574. Do you have any sugestions how I can upgrade? or downgrade than upgrade? The update to 6.0 was done via update from local option,which i don;t have anymore.
Thank you in advance.
It works with me in similar situation, not sure if it work with you!
Downgrade B574> B300
and then...
Upgrade B300> B586 or B588
Hmmm... I had a similar problem. Coming from the RRevolution Custom Rom, when i tried flashing stock again i couldn't. The Power+Vol.Buttons method would give me bootloop. Even though the phone was booting, i followed the unbricking guide, flashing boot,recovery,system and cust (search it up, it's in the forums). After flashing everything and rebooting my phone, it went straight into the upgrade method (the one you get with the Power+Vol) and installed B586 just fine. No problems since and i am now using the B588, so it might work just the same with that one too. Hope this helps
kilroystyx said:
It works with me in similar situation, not sure if it work with you!
Downgrade B574> B300
and then...
Upgrade B300> B586 or B588
Click to expand...
Click to collapse
I would downgrade if I could... but I don't know any other method . Those that i have tryed failed me.
crashpoum99 said:
Hmmm... I had a similar problem. Coming from the RRevolution Custom Rom, when i tried flashing stock again i couldn't. The Power+Vol.Buttons method would give me bootloop. Even though the phone was booting, i followed the unbricking guide, flashing boot,recovery,system and cust (search it up, it's in the forums). After flashing everything and rebooting my phone, it went straight into the upgrade method (the one you get with the Power+Vol) and installed B586 just fine. No problems since and i am now using the B588, so it might work just the same with that one too. Hope this helps
Click to expand...
Click to collapse
thx for the reply, I already succesfully unbricked my phone but i cannot upgrade/ downgrade
Marius TaZ said:
I would downgrade if I could... but I don't know any other method . Those that i have tryed failed me.
Click to expand...
Click to collapse
Did you tried put B300 on the dload folder and then press 3 buttons?
From what I understood, you can't use the 3 button method, right? The phone will just boot... Try pressing all three and when you see the boot logo just release the power button and keep holding the other two. I've seen people getting over such problems by doing this. It probably sounds stupid but i would give it a shot... Also, try putting the upgrade.app file both on internal and external sd!
crashpoum99 said:
From what I understood, you can't use the 3 button method, right? The phone will just boot... Try pressing all three and when you see the boot logo just release the power button and keep holding the other two. I've seen people getting over such problems by doing this. It probably sounds stupid but i would give it a shot... Also, try putting the upgrade.app file both on internal and external sd!
Click to expand...
Click to collapse
the phone doesn't boot, it just gets stuck on the boot screen. I gave it a shot and it still blockes on the boot logo
Marius TaZ said:
the phone doesn't boot, it just gets stuck on the boot screen. I gave it a shot and it still blockes on the boot logo
Click to expand...
Click to collapse
wipe cache & data from eRecovery or twrp
kilroystyx said:
Did you tried put B300 on the dload folder and then press 3 buttons?
Click to expand...
Click to collapse
I tryed with b204. I cannot find a b300 update file
myclarity said:
wipe cache & data from eRecovery or twrp
Click to expand...
Click to collapse
eRecovery is achived by volume up+power buttons right? When I do that It enters in update and says update failed
EDIT: removed the dload folder and succesfully wiped my phone, I will try to upgrade now(fingercrossed)
EDIT 2: I succesfully upgraded to b586. When I pressed the 3 buttons I got stuck at the same boot screen. When I pressed only volume up+ power button it workd.
So if any1 will have the same issue he should defenetly try this out. Big thanks for everyone who responded in this threat :good:

Full AT&T official FIRMWARE G935AUCS4BRA1 to restore //G935A\\ with January security

Full AT&T official FIRMWARE G935AUCS4BRA1 to restore //G935A\\ with January security
G935AUCS4BRA1
Latest ODIN 3.12.10
Enjoy !!!!
norbarb said:
G935AUCS4BRA1
Latest ODIN 3.12.10
Enjoy !!!!
Click to expand...
Click to collapse
As always, thanks so much.
New BIT 5 version is released ... link needed
aamszia said:
New BIT 5 version is released ... link needed
Click to expand...
Click to collapse
There is no full firmware with Bootloader 5, there not even any of G935 was OTA updated to Bootloader 5 as of yet. . There are only combination files witch you should not flash unless you need to fix your phone. So i'm sorry but you stuck on it.
Can't seem to get it to download... through computer or phone
Edit: I got it.... thanks
norbarb said:
G935AUCS4BRA1
Latest ODIN 3.12.10
Enjoy !!!!
Click to expand...
Click to collapse
Thank you ! Quick question, I currently have 935A with May security firmware fully stock, can I just flash this directly to get latest update ? (I believe this will wipe my phone too)
bestjsg said:
Thank you ! Quick question, I currently have 935A with May security firmware fully stock, can I just flash this directly to get latest update ? (I believe this will wipe my phone too)
Click to expand...
Click to collapse
Yes. You can flash directly and this will wipe data in your phone.
Sent from my SM-N950U using XDA Premium HD app
Stock ATT firmware
Thanks tons, now stuck in a boot loop cannot even turn off. I have tried various ways to get the U version and if I get this back to stock, think I will sell it and buy a U version. Hate carrier proprietary garbage.:good:
nomad247 said:
Thanks tons, now stuck in a boot loop cannot even turn off. I have tried various ways to get the U version and if I get this back to stock, think I will sell it and buy a U version. Hate carrier proprietary garbage.:good:
Click to expand...
Click to collapse
You need to get to recovery and clean cache
Sent from my SM-N950U using XDA Premium HD app
Bootloop
You need to get to recovery and clean cache
Have a ask a really dumb question, How do I get to "clear cache" in recovery? And of course, googled it, just have to charge some. I did achieve root earlier, just trying to get the "U" mod installed. Thanks tons
edit: Did the steps so now I have a blinking message saying recovery booting...
nomad247 said:
You need to get to recovery and clean cache
Have a ask a really dumb question, How do I get to "clear cache" in recovery? And of course, googled it, just have to charge some. I did achieve root earlier, just trying to get the "U" mod installed. Thanks tons
Click to expand...
Click to collapse
Press and hold power, home and volume button up anthill Samsung splash screen. Then let go and for recovery menu to popup.
Sent from my SM-N950U using XDA Premium HD app
Boot loop and maybe bricked
I still cannot get to the cache to clear it.
Here what I have right now.
hold power button, screens goes black then have the first screen of start, S7 edge, it goes off and comes back on
i can get into down load mode, tried reloading the stock firmware but get a write error, model miss-match
if arrow down goes to start up boot loop, if arrow up does into downlaod
power off (does not really shut off)
Vol up + home + power, gets the recovery booting loop
Odin sees the phone, but any writes all seem to fail. Sometimes have to use Odin Prince sometimes 3.12.7
In 12/.6 tried to load the S7 edge qual com image file from rooting, and that said fail in red.
Tried to flash back stock but like I said earlier, says product code miss match
I had tried to use odin to do that update and that probably is what screwed the pooch.
Any ideas?
eror 404 not found broken link very nice...
error 404
can you upload the file again ?
@norbarb you need to take all your links down if you're not going to reupload them.
Boot loop and recovery boot loop
You need to get to recovery and clean cache
ok so, is there a way to fix this with boot lop and recovery in boot loop?
Odin comsy sees the phone but ADB does not... Hoping to get this fixed and working again. Had to buy a phone so using a SM-G930V. At least no more ATT for me....
Anyone???
Here you go guys enjoy.
https://drive.google.com/drive/folders/1aal95ObUmnxdNu33bac0GXosOSRLXD0i
Q: why are the files doble the size of the other updates??
bsharp8 said:
Here you go guys enjoy.
Click to expand...
Click to collapse
Disregard - sorry, didn't see the new link.
Edit: Thanks for the updated files! I'm not sure why it failed the first time, but it worked the second time.

Categories

Resources