Hello,
I tried for a few days to upgrade my huawei to build B586 but I haven't been succesful. I unlocked my boot and tryied to upgrade trough brick method(but switching the img files to the b586 ones with huawei extractor). I have no option to update from local and the vol+,- and power buttons do not work. I get stuck at boot screen.
My curent build is B574. Do you have any sugestions how I can upgrade? or downgrade than upgrade? The update to 6.0 was done via update from local option,which i don;t have anymore.
Thank you in advance.
It works with me in similar situation, not sure if it work with you!
Downgrade B574> B300
and then...
Upgrade B300> B586 or B588
Hmmm... I had a similar problem. Coming from the RRevolution Custom Rom, when i tried flashing stock again i couldn't. The Power+Vol.Buttons method would give me bootloop. Even though the phone was booting, i followed the unbricking guide, flashing boot,recovery,system and cust (search it up, it's in the forums). After flashing everything and rebooting my phone, it went straight into the upgrade method (the one you get with the Power+Vol) and installed B586 just fine. No problems since and i am now using the B588, so it might work just the same with that one too. Hope this helps
kilroystyx said:
It works with me in similar situation, not sure if it work with you!
Downgrade B574> B300
and then...
Upgrade B300> B586 or B588
Click to expand...
Click to collapse
I would downgrade if I could... but I don't know any other method . Those that i have tryed failed me.
crashpoum99 said:
Hmmm... I had a similar problem. Coming from the RRevolution Custom Rom, when i tried flashing stock again i couldn't. The Power+Vol.Buttons method would give me bootloop. Even though the phone was booting, i followed the unbricking guide, flashing boot,recovery,system and cust (search it up, it's in the forums). After flashing everything and rebooting my phone, it went straight into the upgrade method (the one you get with the Power+Vol) and installed B586 just fine. No problems since and i am now using the B588, so it might work just the same with that one too. Hope this helps
Click to expand...
Click to collapse
thx for the reply, I already succesfully unbricked my phone but i cannot upgrade/ downgrade
Marius TaZ said:
I would downgrade if I could... but I don't know any other method . Those that i have tryed failed me.
Click to expand...
Click to collapse
Did you tried put B300 on the dload folder and then press 3 buttons?
From what I understood, you can't use the 3 button method, right? The phone will just boot... Try pressing all three and when you see the boot logo just release the power button and keep holding the other two. I've seen people getting over such problems by doing this. It probably sounds stupid but i would give it a shot... Also, try putting the upgrade.app file both on internal and external sd!
crashpoum99 said:
From what I understood, you can't use the 3 button method, right? The phone will just boot... Try pressing all three and when you see the boot logo just release the power button and keep holding the other two. I've seen people getting over such problems by doing this. It probably sounds stupid but i would give it a shot... Also, try putting the upgrade.app file both on internal and external sd!
Click to expand...
Click to collapse
the phone doesn't boot, it just gets stuck on the boot screen. I gave it a shot and it still blockes on the boot logo
Marius TaZ said:
the phone doesn't boot, it just gets stuck on the boot screen. I gave it a shot and it still blockes on the boot logo
Click to expand...
Click to collapse
wipe cache & data from eRecovery or twrp
kilroystyx said:
Did you tried put B300 on the dload folder and then press 3 buttons?
Click to expand...
Click to collapse
I tryed with b204. I cannot find a b300 update file
myclarity said:
wipe cache & data from eRecovery or twrp
Click to expand...
Click to collapse
eRecovery is achived by volume up+power buttons right? When I do that It enters in update and says update failed
EDIT: removed the dload folder and succesfully wiped my phone, I will try to upgrade now(fingercrossed)
EDIT 2: I succesfully upgraded to b586. When I pressed the 3 buttons I got stuck at the same boot screen. When I pressed only volume up+ power button it workd.
So if any1 will have the same issue he should defenetly try this out. Big thanks for everyone who responded in this threat :good:
Related
Hey guys,
I just recently got a refurb Droid 3 after my old one had the backlight go out, I hand't had a chance to bootstrap it and put ICS on it. But I was able to get it rooted. I restarted my phone today and ever since it has been stuck at the M logo screen and I've tried everything I can find to remedy this.
I updated this morning to the most recent OTA update (5.7.906 I believe) and then rooted it.
To fix the issue I've tried a few different things. I tried Pete's SBF to 5.7.890 but I was getting an error about the cbt.bin file. I found that with the recent changed to 5.7.906 you aren't able to directly flash over it to go back to 5.7.890. I then found another post on here which had a script to go back to 5.7.890 from 5.7.906. I ran that and still had the same result.
Any other ideas or anything that I am missing?
I can get into fastboot, I've been using the scripts with moto-fastboot. Normal boot is just leaving me at the M logo, booting into recovery yields the same result.
Any help would be appreciated since I have no clue what else I can do at this point...
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
I don't have a BT Tools selection. I do have BP Tools though. I selected it and it just sits there on the M logo as well...
I've tried a few of Pete's scripts with no luck so far (worked on the old Droid 3 when I put it back to stock before shipping it back).
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
imperpetual said:
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
Click to expand...
Click to collapse
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Juicy555 said:
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Click to expand...
Click to collapse
It is charged. When it's not charged it gives the "LOW BATTERY" error.
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
ovelayer said:
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
Click to expand...
Click to collapse
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
imperpetual said:
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
Click to expand...
Click to collapse
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
ovelayer said:
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
Click to expand...
Click to collapse
I'm fairly certain that could work, if I could ever get into the Stock recovery....I'm not able to boot into anything. Going to try a few other things, if nothing else works I'll just take it in and see if I can get yet another warranty replacement.
Thanks for the responses, if you have any other ideas just let me know.
I think the main thing that needs to be addressed is that I need to be able to get into recovery and then I will be set to fix it. Right now it just sits at the M logo for Recovery (and any other options from the boot menu).
Hi All-
I spent several hours trying to get ADB to work on my Verizon LG G2, nothing worked (device not connected error). So I flashed the latest TWRP for the Verizon LG G2 from the Android Development section using Flashify. I can get into recovery using an app, but I can't manually get into recovery using the rear buttons. I power off, hold the power and volume down buttons..then when LG comes up I hold them again and the phone just reboots. I have tried this a thousand ways, and I can't manually get into recovery (which scares me). It seems everyone else is able to do this, maybe do I need to reflash recovery using the ADB method if I can get it to work? I can get into it now through the OS and make backups, I am just worried I will flash a rom and NOT be able to do that. Any ideas what I can do to manually get in?
Thanks-
Sean
I'm on my phone now but had the same problem.
Flashify was the culprit.
Change computers and find the thread asking for a video of how to install TWRP. I followed the instructions and it worked.
Sent from my VS980 4G using Tapatalk 4
seanblock82 said:
Hi All-
I spent several hours trying to get ADB to work on my Verizon LG G2, nothing worked (device not connected error). So I flashed the latest TWRP for the Verizon LG G2 from the Android Development section using Flashify. I can get into recovery using an app, but I can't manually get into recovery using the rear buttons. I power off, hold the power and volume down buttons..then when LG comes up I hold them again and the phone just reboots. I have tried this a thousand ways, and I can't manually get into recovery (which scares me). It seems everyone else is able to do this, maybe do I need to reflash recovery using the ADB method if I can get it to work? I can get into it now through the OS and make backups, I am just worried I will flash a rom and NOT be able to do that. Any ideas what I can do to manually get in?
Thanks-
Sean
Click to expand...
Click to collapse
Try holding volume down + power
Immediately when LG appears let go of both and ONLY hold onto power, should boot into option to factory reset
Hit power button 3 times to continue, then itll load twrp
let me know if this works.
Thanks!
Thank you illyfilly and bodom_hc. Bodom_hc's method worked. I know others must be having this same issue/maybe someone should post it up somewhere. I really apprecaite the time you both took out to reply to me. Now I can flash rom's like I have for every other device. Much appreciated, thank you!
Classify,menu,reboot recovery
Sent from my VS980 4G using XDA Premium 4 mobile app
seanblock82 said:
Thank you illyfilly and bodom_hc. Bodom_hc's method worked. I know others must be having this same issue/maybe someone should post it up somewhere. I really apprecaite the time you both took out to reply to me. Now I can flash rom's like I have for every other device. Much appreciated, thank you!
Click to expand...
Click to collapse
No problem.
I have the same problem
i rooted my phone using this guide: http://forum.xda-developers.com/showthread.php?t=2448887
and then installed ROM Manager and flashed ClockWorkMod Recover for my d802 inter.
But cant get into recovery.
I get this error message: "No command"
just downloaded flashify... What option do you use for flashing twrp ? Boot or Recovery ?
boundless said:
just downloaded flashify... What option do you use for flashing twrp ? Boot or Recovery ?
Click to expand...
Click to collapse
Flash Recovery, not Boot.
bodom_hc said:
Try holding volume down + power
Immediately when LG appears let go of both and ONLY hold onto power, should boot into option to factory reset
Hit power button 3 times to continue, then itll load twrp
let me know if this works.
Click to expand...
Click to collapse
Thank you for this! I was having the same problem. I have to admit, I panicked a little when it said it was proceeding with the factory hard reset, but then the recovery screen came up. Phew!
Thanks again.
bodom_hc said:
Try holding volume down + power
Immediately when LG appears let go of both and ONLY hold onto power, should boot into option to factory reset
Hit power button 3 times to continue, then itll load twrp
let me know if this works.
Click to expand...
Click to collapse
Thank you let the crack flashing continue
Was stuck in boot loop could not get into recovery.
I was having a similar issue - tried to flash TWRP using flashify and got to a point where I could load into my ROM fine, but nothing I tried would get me into recovery mode - the phone would just show a couple lines of text and then a black screen. Fortunately I still had adb access and used this guide: http://forum.xda-developers.com/showthread.php?t=2449670 (along with youtube video https://www.youtube.com/watch?v=OZSjL6FCyxA).
Using this stuff I was finally able to flash TWRP 2.6.3.1, and from there I had a stable recovery to work with. 2.6.3.2 and 2.6.3.3 did not work for me when trying to flash with Loki, but 2.6.3.1 did. Not sure what the deal was there, but I was probably doing something dumb.
bodom_hc said:
Try holding volume down + power
Immediately when LG appears let go of both and ONLY hold onto power, should boot into option to factory reset
Hit power button 3 times to continue, then itll load twrp
let me know if this works.
Click to expand...
Click to collapse
seanblock82 said:
Thank you illyfilly and bodom_hc. Bodom_hc's method worked. I know others must be having this same issue/maybe someone should post it up somewhere. I really apprecaite the time you both took out to reply to me. Now I can flash rom's like I have for every other device. Much appreciated, thank you!
Click to expand...
Click to collapse
RPAusCan said:
Thank you for this! I was having the same problem. I have to admit, I panicked a little when it said it was proceeding with the factory hard reset, but then the recovery screen came up. Phew!
Thanks again.
Click to expand...
Click to collapse
Can anyone quadruple confirm that doing this does NOT erase all user data/settings and factory reset the G2? I'm honestly too scared to do this as I can't do a nandroid backup without TWRP... Thank so much!
tstretch said:
Can anyone quadruple confirm that doing this does NOT erase all user data/settings and factory reset the G2? I'm honestly too scared to do this as I can't do a nandroid backup without TWRP... Thank so much!
Click to expand...
Click to collapse
It does not erase, it takes you to recovery
datechnerd said:
It does not erase, it takes you to recovery
Click to expand...
Click to collapse
Thanks! I ended up downloading FreeGee from the Play store & flashing TWRP the way. Worked and booted into recovery. Still seems weird to me that flashify would make you go to the permanent reset function and say yes.
That's how it works with a locked boatloader. Pretty common.
Thank you
tstretch said:
Thanks! I ended up downloading FreeGee from the Play store & flashing TWRP the way. Worked and booted into recovery. Still seems weird to me that flashify would make you go to the permanent reset function and say yes.
Click to expand...
Click to collapse
I thought i sh*t bricked my phone and pants. FreeGee soothed my soul.
Flashify
I tried Flashify and it didn't work...It didn't flash the recovery img i selected that was placed on the sdcard. I saw a post about FreeGee on the first couple of pages of this thread and gave it a try. I was very happy that it worked on the first try...
Freegee worked great for me also. Flashify did not.
Hi,
a friend of mine has got in China a P7 with a strange EMUI 2.0 firmware (I always knew that P7 came with 2.3 since the first version). I wanted to upgrade it to the EMUI 3.0, then I downloaded the package from emui.com, I extracted the dload directory and copied to the internal memory (the same procedure I succesfully did with mine) but when I booted it holding Vol-, Vol + and Start button I just went into the stock recovery interface.
I though was a problem of the recovery, then I restarted with adb into bootloeader mode but the screen was all empty except for "fastboot mode" wrote at the bottom. When I tried to flash another recovery I got an error saying that flashing the recovery was not allowed.
Anyone knows what the problem is?
Thanks in advance
locked bootloader..
blueIBI said:
locked bootloader..
Click to expand...
Click to collapse
And also is resisting to any attempt to unlock: do not give Product ID so I cannot produce the unlocking code, neither are working all methods I found on the web. I may have to give up
maybe there is a firmware for your p7-L07 like there is for the p6-u06 where you can flash a so called unicom version and first downgrade and then upgrade/update..
and hopefully this downgrade unlocks the bootloader..
just my thoughts..
blueIBI said:
maybe there is a firmware for your p7-L07 like there is for the p6-u06 where you can flash
Click to expand...
Click to collapse
Thanks blueIBI, the problem is how to flash it, since the normal way do not work. After copying the dload directory on the phone memory, if I use the system menu to perform local upate or I reboot by pressing Vol+ Vol- Start I always end up in the recovery menu, the firmware gets never installed.
Will try harder.
jimmi61 said:
Thanks blueIBI, the problem is how to flash it, since the normal way do not work. After copying the dload directory on the phone memory, if I use the system menu to perform local upate or I reboot by pressing Vol+ Vol- Start I always end up in the recovery menu, the firmware gets never installed.
Will try harder.
Click to expand...
Click to collapse
Are you sure this is original P7 not some chinese crap looking like P7?
mrcs64 said:
Are you sure this is original P7 not some chinese crap looking like P7?
Click to expand...
Click to collapse
The phone belongs to a friend of mine. I own another P7 and they look exactly the same. It came in the original box with everything, so I have no doubt that it is original.
The fact that it has EMUI2.0 make me think that it was one of the first released to the market. The phone is working fine, just it is not upgrading on-line and I cannot find a way to upgrade it manually. I will try contacting Huawei support.
SM-T815
I have try to root with odin and cf autoroot and all work fine, then I have installed twrp for 815 5.0.2 version. After the installation the tablet restart on recovery mode, I try to make a backup and twrp works good but at the restart the tablet is in bootloop.
I can’t shut down. I can only access download mode and not recovery mode.
I have flashed the original firmware with odin and odin says PASS but at the restart it is bootloop again. I try to flash twrp again and odin says PASS, after this I can read on the start screen (the only one I can see) “recovery is not nandroid enforced”. I tried different firmware but nothing work.
Someone can help me?
Grazie 1000
Boot into recovery POWER +HOME +VOL DOWN then as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons.
Wipe data. If that doesn't work then factory reset.
Thanks for the answer. I try more than 100 time but it don't go in recovery mode. I tried to complete discharging and then recharging with the buttons pushed. Nothing. Every time it's stuck in the start screen and i can't shut down.
ashyx said:
Boot into recovery POWER +HOME +VOL DOWN then as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons.
Wipe data. If that doesn't work then factory reset.
Click to expand...
Click to collapse
sorry to bother you,
do you think it is possible to force recovery mode from odin? i can't do it with buttons
ctlx said:
sorry to bother you,
do you think it is possible to force recovery mode from odin? i can't do it with buttons
Click to expand...
Click to collapse
Not possible.
Try booting to Download mode then hit CANCEL then immediately hold HOME + VOL DOWN + POWER make sure you hold the buttons in that order and you must be quick.
[email protected] said:
I don't have much idea but I had read somewhere that u can flash ROMs through Odin too.
P.S. I m not sure about it.
Sent from my GT-S7390 using XDA Forums
Click to expand...
Click to collapse
Please read the OP again.
ashyx said:
Not possible.
Try booting to Download mode then hit CANCEL then immediately hold HOME + VOL DOWN + POWER make sure you hold the buttons in that order and you must be quick.
Click to expand...
Click to collapse
no way. i flash the stock firmware with kies3, all work good but bootloop again. impossible to boot in recovery, i try more then 100 times your way but only download mode
ctlx said:
no way. i flash the stock firmware with kies3, all work good but bootloop again. impossible to boot in recovery, i try more then 100 times your way but only download mode
Click to expand...
Click to collapse
please don't let me go to samsung asking for help
ctlx said:
please don't let me go to samsung asking for help
Click to expand...
Click to collapse
Still not able to boot to recovery? I will build you a boot image that will boot you directly to recovery.
ashyx said:
Still not able to boot to recovery? I will build you a boot image that will boot you directly to recovery.
Click to expand...
Click to collapse
it will be great!
yes i'm still on bootloop
same trouble here lase help
Hi All!
I would like to share with you how I fix the preblem after root of my T815.
After long night and reading whole net I found the solution.
As you I also wants to root my device because of availible only one user. I wanted to have multiusers. So folowing the instructions downloading all software and after root I got bootloop. Trying everithing but no success. I wasn't able to flash even some of the stock ROMs.
Solution:
I found in Sammobile what is my current ROM and downloaded it. Then flash - no any problems. Went smooth. Then I root the device... and now I have rooted device with multiuser support.
It seems that after fresh flash everithing is OK. It seems that after you playing with your device for a while you enabled some options thats make your device to loop after root.
I wish you Happy New Year!
Nikog
Whoops sorry, I completely forgot to come back to you about this!
Glad you got it sorted.
Nikog said:
Hi All!
I would like to share with you how I fix the preblem after root of my T815.
After long night and reading whole net I found the solution.
As you I also wants to root my device because of availible only one user. I wanted to have multiusers. So folowing the instructions downloading all software and after root I got bootloop. Trying everithing but now success. I wasn't able to flash even some of the stock ROMs.
Solution:
I found in Sammobile what is my current ROM and downloaded it. Then flash - no any problems. Went smooth. Then I root the device... and now I have rooted device with multiuser support.
It seems that after fresh flash everithing is OK. It seems that after you playing with your device for a while you enabled some options thats make your device to loop after root.
I wish you Happy New Year!
Nikog
Click to expand...
Click to collapse
thanks, I will try and let you know if it works for me.
at this time I have tried to flash different stock rooms but not one works, even if odin says it is all ok
ashyx said:
Whoops sorry, I completely forgot to come back to you about this!
Glad you got it sorted.
Click to expand...
Click to collapse
i don't find a solution.
if you can help me it will be great
ctlx said:
i don't find a solution.
if you can help me it will be great
Click to expand...
Click to collapse
Still not able to boot to recovery?
ashyx said:
Still not able to boot to recovery?
Click to expand...
Click to collapse
yes still on the same condition, only download mode
ctlx said:
yes still on the same condition, only download mode
Click to expand...
Click to collapse
OK, hopefully I can come back to you later with a boot.img to boot directly to recovery.
ashyx said:
OK, hopefully I can come back to you later with a boot.img to boot directly to recovery.
Click to expand...
Click to collapse
thanks a lot
ctlx said:
thanks a lot
Click to expand...
Click to collapse
It was a late night for me last night and working late again tonight.
If I get the opportunity after work I'll get something up, but if not it may be tomorrow on my day off.
I tried installing marshmallow but it won't work.
It downloads then I get an image of a phone with triangle and ! mark.
I'm not rooted. I tried following other threads advice but I'm not too phone savy lol. Any advice would help.
Minos90 said:
I tried installing marshmallow but it won't work.
It downloads then I get an image of a phone with triangle and ! mark.
I'm not rooted. I tried following other threads advice but I'm not too phone savy lol. Any advice would help.
Click to expand...
Click to collapse
How exactly did you try to install marshmallow? Try forcing a reboot by holding the power and volume-up buttons simultaneously for 15 seconds. I want to see if you can boot properly.
I got a notice on the top of my phone saying update Available . So I downloaded it 795mb and once it finished downloading , I hit install and it did begin to install. Until less the half way the red ! Came up. I also did a factory reset and still did the same thing
OK let me try rebooting now
str8upx said:
How exactly did you try to install marshmallow? Try forcing a reboot by holding the power and volume-up buttons simultaneously for 15 seconds. I want to see if you can boot properly.
Click to expand...
Click to collapse
So I held the volume up button and power button for 15 seconds. It just restarted the phone.
Minos90 said:
I tried installing marshmallow but it won't work.
It downloads then I get an image of a phone with triangle and ! mark.
I'm not rooted. I tried following other threads advice but I'm not too phone savy lol. Any advice would help.
Click to expand...
Click to collapse
Have you unlocked the boot loader? Or something.
Have you tried it again, maybe the download was corrupted.
And if for some reason it doesn't want to update there is the RUU, but it will require a PC. Be adviced, The RUU will delete everything on the phone and you will have to download all apps again, I'd recommend to move personal files over to the SD card.
IsaacGuti said:
Have you unlocked the boot loader? Or something.
Have you tried it again, maybe the download was corrupted.
And if for some reason it doesn't want to update there is the RUU, but it will require a PC. Be adviced, The RUU will delete everything on the phone and you will have to download all apps again, I'd recommend to move personal files over to the SD card.
Click to expand...
Click to collapse
I've tried it 5 times. Neither works.
How do you unlock the boot loader?
Do I have to be rooted? Which I'm not
What's the RUU?
Minos90 said:
I've tried it 5 times. Neither works.
How do you unlock the boot loader?
Do I have to be rooted? Which I'm not
What's the RUU?
Click to expand...
Click to collapse
You don't have to have the boot loader unlocked, or be rooted. I was just asking if you had done it.
The RUUs are here: http://www.htc.com/us/support/rom-downloads.html
The one for the 626s metro is this one: http://www.htc.com/us/support/htc-desire-626s-metro-pcs/news/
IsaacGuti said:
You don't have to have the boot loader unlocked, or be rooted. I was just asking if you had done it.
The RUUs are here: http://www.htc.com/us/support/rom-downloads.html
The one for the 626s metro is this one: http://www.htc.com/us/support/htc-desire-626s-metro-pcs/news/
Click to expand...
Click to collapse
So what do I do? Download the 1.3gb file at the bottom?
Minos90 said:
So what do I do? Download the 1.3gb file at the bottom?
Click to expand...
Click to collapse
Yes, on a computer.
*Reminder that the RUU deletes everything on the phone* move personal files to your SD card or cloud storage.
ok im going to attempt this, im downloading the 1.3 gb file now
IsaacGuti said:
Yes, on a computer.
*Reminder that the RUU deletes everything on the phone* move personal files to your SD card or cloud storage.
Click to expand...
Click to collapse
so i downloaded it, and tried to install it, and it didnt work, now my phone is stuck in a black screen with red writing,
and im afraid to unplug it
ok so it turned back on. but it said they werent the proper files. idk what happened