Database Develop

[Q] The phone doesn't recovery ...

Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english

Tix0mir said:
Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english
Click to expand...
Click to collapse
Sadly, you are not alone with this problem. My experience was similar to yours. I solved it by throwing the phone away and buying another. Unfortunately, my second P7 has faulty flash memory and is almost useless. I'm now awaiting the delivery of my third P7. I suggest you buy another and avoid EMUI 3.0. Good luck!

arthios said:
Sadly, you are not alone with this problem. My experience was similar to yours. I solved it by throwing the phone away and buying another. Unfortunately, my second P7 has faulty flash memory and is almost useless. I'm now awaiting the delivery of my third P7. I suggest you buy another and avoid EMUI 3.0. Good luck!
Click to expand...
Click to collapse
Most easily to buy another ... but its not a solution The phone working good, but the problem means i forever must be with those beta emui 3 rom Before i had p6 and i re-flash it may be 20 times and there was no problem ,a those .. p7 full rubbish )) Thanks for your answer

Tix0mir said:
Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english
Click to expand...
Click to collapse
A question? How can you do factory reset through settings when you have a bricked phone? I find this very strange!
If by any chance you still can load the OS, get the quickboot app in the market. It will get you to fastboot and than maybe you can install recovery.
All in all, I still don't understand, is your device bricked (can't load OS, just constant reboots - loops), or you just can' downgrade to EMUI 2.3!
Good luck

ibeqa said:
A question? How can you do factory reset through settings when you have a bricked phone? I find this very strange!
If by any chance you still can load the OS, get the quickboot app in the market. It will get you to fastboot and than maybe you can install recovery.
All in all, I still don't understand, is your device bricked (can't load OS, just constant reboots - loops), or you just can' downgrade to EMUI 2.3!
Good luck
Click to expand...
Click to collapse
Probably "brick" is not the exact word, but everything which i wrote in first post is true .. cant do a factory reset from settings and via 3 buttons and cant flash again emui 3 not only 2.3 and the phone just restarts or stuck on first huawei logo when i try to do that and cant charging when is turn off ..etc .. )) When i get quickboot from market what i have to do with it ? Thanks !

Tix0mir said:
When i get quickboot from market what i have to do with it ? Thanks !
Click to expand...
Click to collapse
To install quickboot you need to load OS which you apparently cannot at the moment. Did you try this: http://forum.xda-developers.com/ascend-p7/help/stock-recovery-stuck-bootloop-t2875935

ibeqa said:
To install quickboot you need to load OS which you apparently cannot at the moment. Did you try this: http://forum.xda-developers.com/ascend-p7/help/stock-recovery-stuck-bootloop-t2875935
Click to expand...
Click to collapse
I totally bricked the phone ... i wrote in fastboot "fastboot flash boot boot.img" and after that the ph0ne begin to restart in timeless circle .. and still do it ... please help emergency ))

Try the method on the first post: http://forum.xda-developers.com/ascend-p7/general/reverting-emui-3-0-to-2-3-t2934277

I fix it ... turned out i was installed wrong boot.img .. may be of huawei p6 and the stock recovery which installed doesnt work .. now instaled working and everything is ok Thanks 4 wish to help me !

I have a similar/the same issue as some people above described.
I reverted from CWM recovery to stock recovery (same stock recovery img as I used before succesfully). Now the phone can only boot to stock recovery (Reboot system now, Wipe data, Wipe cache, are the only options.
The phone is not detected by adb on that screen, so I can't try to reboot to bootloader using ADB. I also can't get into bootloader from volume button + power, because the phone boots immediately to recovery after I turn it off.
Fortunately I managed to solve it, so for reference:
Remove SD card
Place full (no incremental update) update.APP file on external sd card in /dload folder (B609: https://mega.co.nz/#!akcBCZBJ!4jLhlNsH54H-3DHeK3xPkzT3fWIHBR6QtbOllubdz5Q) using a different device (computer)
insert SD card
turn the phone off from the recovery loop by holding all three buttons (VOL+POW) at the same time. It's a bit tricky, but keep trying until the phone is off
Insert the USB cable in your phone and connect it with your computer (haven't tested if it simply needs power, or an ADB enabled computer)
Then immediately press all three buttons again
You should enter recovery again now, but the phone will immediately start flashing the update.APP ROM.
You will lose all user data though!

same problem here
Hello to all,
I had the same problem that my phone doesn't go on and time after time boot fails,
i read this solution and it works great i am updating my phone.
only i take the power + vol down and when the logo came switch vol down to vol up.
thx for youre help and sorry for my bad english
grts rob

Tried updating to 6.0, stuck at Huawei loadingscreen

Afternoon gents.
So yesterday i tried to update my Mate S with 5.1 Android to the 6.0 version with Huawei´s Firmware. After adding the Dload file to the mobilephone and starting the update sequenze, the phone does a double boot, basically does the first boot as usual, after loading the first boot it reboots and does a second boot. The second boot just gets stuck at the Huawei loadingscreen.
Ive tried to clear both the cache folder and do a factory reset, both did not work. I tried to do a recovery from the Hisuit software from Huawei, but as my phone is not supported by the software, that did not work either. (And yes, i did get the phone into the Fast Boot menu).
So from what i can see, im left with doing a manuel reset of the ROM. This is not something im very good at, allthough i do know alot about PCs, phones is a whole nother area i have not exlored yet.
So i was wondering if anyone here had any help they could provide me with how i can fix this for this specific phone. I do have the stock ROM and the newest ROM with 6.0 Android.
Ive been fooling around with ADB and SP Flash Tools, but i constantly get stuck as im not too sure what im doing.
Any help is greatly appreciated!

Edits
Just a few Edits:
The ADB i simply could not figure out how to use, the SP Flash Tools on the other hand looked quite simplistic and easy to use. Problem i had with the SP Flash Tools is that i only have the Update.APP file, but i did need a Scatter file (and possibly some other files), this is where i got stuck using this software.
Also, i forgot to mention. Whenever i turn off the phone by holding inn the ON/OFF Buttion, it automatically restarts and tries to boot again. Basically i cannot turn it off.

hi..
try to get a full 5.1.1 rom for your mate s..
which cust version do you have?
eu is c432
global is c900
and all others are provider based firmwares or other countries..
so you need to get your proper firmware which is for your country, then take an external sd card..format it on pc (fat32), put a folder on it named "dload", inside this you put the update.app (no need for other files)..
then start your phone by pressing all three hardware buttons (power, vol+ & vol-) at the same time and hold them until the update screen is showing up..
then it should flash/install this firmware..
after that try to start the OTA updater by huawei..
if this doesn't work, take the correct update.app (full version) of the next higher version (in my example it was c432b145 (android 5) - c432b321 (android 6 beta) - c432b361 (android 6 final) ) and do the same as before..
good luck
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk

blueIBI said:
hi..
try to get a full 5.1.1 rom for your mate s..
which cust version do you have?
eu is c432
global is c900
and all others are provider based firmwares or other countries..
so you need to get your proper firmware which is for your country, then take an external sd card..format it on pc (fat32), put a folder on it named "dload", inside this you put the update.app (no need for other files)..
then start your phone by pressing all three hardware buttons (power, vol+ & vol-) at the same time and hold them until the update screen is showing up..
then it should flash/install this firmware..
after that try to start the OTA updater by huawei..
if this doesn't work, take the correct update.app (full version) of the next higher version (in my example it was c432b145 (android 5) - c432b321 (android 6 beta) - c432b361 (android 6 final) ) and do the same as before..
good luck
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk
Click to expand...
Click to collapse
Hi, thanks for the reply.
To be honest, im not completly sure which i have, but considering i bought it in Norway i supose the EU version is the correct: eu is c432
I did not know you coul boot from an external SD card. this made things alot easyer. Ill drive out to my office where i have a micro SD card coverter and try this fix. Ill bring all the Firmwares and lets hope it all works!
Cheers for the reply man, might just be my lifesaver.

Hello again,
I tried what you suggested with both the stock ROM and the new updated ROM, but it did not seem to work. The problem i get is when the update starts, it reaches 5% when it verifies the software, then i get a "Software install failed!".
Please note i had this problem before i tired this, problem first occured when i did a factory reset of the device. So i belive the phone is still not booting from the SD card, but from thge phone itself as before. How do i solve this?

I could also add. before i did the factory reset, the update did work, but it still got stuck on the boot logo.

I gues ill be sending the phone inn for service tomorrow unfortunatly, cause i cannot figure this out. Thanks though!

I cannot upgrade any further

Hello,
I tried for a few days to upgrade my huawei to build B586 but I haven't been succesful. I unlocked my boot and tryied to upgrade trough brick method(but switching the img files to the b586 ones with huawei extractor). I have no option to update from local and the vol+,- and power buttons do not work. I get stuck at boot screen.
My curent build is B574. Do you have any sugestions how I can upgrade? or downgrade than upgrade? The update to 6.0 was done via update from local option,which i don;t have anymore.
Thank you in advance.

It works with me in similar situation, not sure if it work with you!
Downgrade B574> B300
and then...
Upgrade B300> B586 or B588

Hmmm... I had a similar problem. Coming from the RRevolution Custom Rom, when i tried flashing stock again i couldn't. The Power+Vol.Buttons method would give me bootloop. Even though the phone was booting, i followed the unbricking guide, flashing boot,recovery,system and cust (search it up, it's in the forums). After flashing everything and rebooting my phone, it went straight into the upgrade method (the one you get with the Power+Vol) and installed B586 just fine. No problems since and i am now using the B588, so it might work just the same with that one too. Hope this helps

kilroystyx said:
It works with me in similar situation, not sure if it work with you!
Downgrade B574> B300
and then...
Upgrade B300> B586 or B588
Click to expand...
Click to collapse
I would downgrade if I could... but I don't know any other method . Those that i have tryed failed me.
crashpoum99 said:
Hmmm... I had a similar problem. Coming from the RRevolution Custom Rom, when i tried flashing stock again i couldn't. The Power+Vol.Buttons method would give me bootloop. Even though the phone was booting, i followed the unbricking guide, flashing boot,recovery,system and cust (search it up, it's in the forums). After flashing everything and rebooting my phone, it went straight into the upgrade method (the one you get with the Power+Vol) and installed B586 just fine. No problems since and i am now using the B588, so it might work just the same with that one too. Hope this helps
Click to expand...
Click to collapse
thx for the reply, I already succesfully unbricked my phone but i cannot upgrade/ downgrade

Marius TaZ said:
I would downgrade if I could... but I don't know any other method . Those that i have tryed failed me.
Click to expand...
Click to collapse
Did you tried put B300 on the dload folder and then press 3 buttons?

From what I understood, you can't use the 3 button method, right? The phone will just boot... Try pressing all three and when you see the boot logo just release the power button and keep holding the other two. I've seen people getting over such problems by doing this. It probably sounds stupid but i would give it a shot... Also, try putting the upgrade.app file both on internal and external sd!

crashpoum99 said:
From what I understood, you can't use the 3 button method, right? The phone will just boot... Try pressing all three and when you see the boot logo just release the power button and keep holding the other two. I've seen people getting over such problems by doing this. It probably sounds stupid but i would give it a shot... Also, try putting the upgrade.app file both on internal and external sd!
Click to expand...
Click to collapse
the phone doesn't boot, it just gets stuck on the boot screen. I gave it a shot and it still blockes on the boot logo

Marius TaZ said:
the phone doesn't boot, it just gets stuck on the boot screen. I gave it a shot and it still blockes on the boot logo
Click to expand...
Click to collapse
wipe cache & data from eRecovery or twrp

kilroystyx said:
Did you tried put B300 on the dload folder and then press 3 buttons?
Click to expand...
Click to collapse
I tryed with b204. I cannot find a b300 update file
myclarity said:
wipe cache & data from eRecovery or twrp
Click to expand...
Click to collapse
eRecovery is achived by volume up+power buttons right? When I do that It enters in update and says update failed
EDIT: removed the dload folder and succesfully wiped my phone, I will try to upgrade now(fingercrossed)
EDIT 2: I succesfully upgraded to b586. When I pressed the 3 buttons I got stuck at the same boot screen. When I pressed only volume up+ power button it workd.
So if any1 will have the same issue he should defenetly try this out. Big thanks for everyone who responded in this threat :good:

Full Return to Original Guide

Hello guys. I have a will to root my phone or maybe try one or two ROMs. However I am a guy that always wants to turn back the phone to it's original state. Can anyone of you provide me something like guide to returning to Original state?
Sent from my EVA-L09 using Tapatalk

You need to remember the firmware version you want to go back to (like EVA-L09CxxxBxxx) and install the OTA by copying it on the dload folder on your SD card and powering on with Vol+ and Vol- pressed. You can find the files in this forum. This method works even if you have a custom rom installed or your device does not boot at all.
Some OTAs even lock your bootloader again.

christopherpfister said:
You need to remember the firmware version you want to go back to (like EVA-L09CxxxBxxx) and install the OTA by copying it on the dload folder on your SD card and powering on with Vol+ and Vol- pressed. You can find the files in this forum. This method works even if you have a custom rom installed or your device does not boot at all.
Some OTAs even lock your bootloader again.
Click to expand...
Click to collapse
I meant by any means like restoring bootloader as its locked state etc.

Unlock bootloader, twrp, magisk help

Hi I've got a Huawei P8 lite, on the latest version, stock everything, I know how to unlock the bootloader and have the unlock code, my question is which version of twrp do I use and which version of magisk do I use for root and will I have any issues regarding safetynet?

Daggerzz said:
Hi I've got a Huawei P8 lite, on the latest version, stock everything, I know how to unlock the bootloader and have the unlock code, my question is which version of twrp do I use and which version of magisk do I use for root and will I have any issues regarding safetynet?
Click to expand...
Click to collapse
do you mean by "latest" your on oreo and emui 8? magisk 16.0 works fine and i think you will pass safety unless you install xposed.

player98343 said:
do you mean by "latest" your on oreo and emui 8? magisk 16.0 works fine and i think you will pass safety unless you install xposed.
Click to expand...
Click to collapse
Hi, really sorry for the late reply, been an unusual year, its currently on EMUI 5.0 (Nougat) and if I go to system update it reports back saying thats the latest update, any idea how to get it to do the update to EMUI8?
TIA

Daggerzz said:
Hi, really sorry for the late reply, been an unusual year, its currently on EMUI 5.0 (Nougat) and if I go to system update it reports back saying thats the latest update, any idea how to get it to do the update to EMUI8?
TIA
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8.../guide-holy-emui8-treble-rom-pra-lx1-t3773216
follow that guide to get to emui 8 but its still on beta use the firmware b366 or b364

good morning to all, I wanted to ask if after having unlocked my bootloader of my p8 lite 2017 it is normal that this screen appears (screen attached) on power up. I also did the flash twrp but when I try to go on it always comes out the screen attached

maximil_98 said:
good morning to all, I wanted to ask if after having unlocked my bootloader of my p8 lite 2017 it is normal that this screen appears (screen attached) on power up. I also did the flash twrp but when I try to go on it always comes out the screen attached
Click to expand...
Click to collapse
Yes it is. Just gotta press the power button once when it shows up
Also, did you save a screenshot or write down your code?

yes, I have anootated my code but will I still need it? For what? To access the twrp, so what should I do?

maximil_98 said:
yes, I have anootated my code but will I still need it? For what? To access the twrp, so what should I do?
Click to expand...
Click to collapse
The code is needed in case you want to relock the bootloader or the phone relocks it, now that the Huawei bootloader website is gone for good

oh thanks, I had read this on the huawey website. But I still can not access the twrp I always get the screen of the photo attached before

maximil_98 said:
oh thanks, I had read this on the huawey website. But I still can not access the twrp I always get the screen of the photo attached before
Click to expand...
Click to collapse
Did you pressed the Power Button + Volume Up in order to boot into TWRP?, And also are you on EMUI 5 or EMUI 8 ?

Emui 5 why?

maximil_98 said:
oh thanks, I had read this on the huawey website. But I still can not access the twrp I always get the screen of the photo attached before
Click to expand...
Click to collapse
Here is how
Press power and volume down until screen turns on
Quickly take fingers off all buttons when screen goes on with huawei logo
If it works press thanks plz

Emui 5 why?

Guys continue to have problems after doing the flash of twrp with adb. I can not access in any way to twrp because if I press power and vol up me comes out the screen that comes out on power (screen attached) but without options and remains stuck on this whatever I press. Also I would like to install the new version pra-lx1c432b209 that came to me via ota but every time I try it goes wrong and returns to the screen above

If I try to flash the twrp again, do I risk the phone?

maximil_98 said:
If I try to flash the twrp again, do I risk the phone?
Click to expand...
Click to collapse
No,
However did you let go of the buttons immediately when the Huawei screen comes on? If you leave your fingers on them it wont work

Is there still a way to get the bootload code for the P8 lite, or is there any other way to get root acces for it?

I redid the flash to twrp. Now finally the twrp is ok. Now instead, I wonder why the system update pra-lx1c432b209 goes wrong? Can I try to install with twrp putting update.app in folder dload in microsd?
I have not done the root on the phone yet

maximil_98 said:
I redid the flash to twrp. Now finally the twrp is ok. Now instead, I wonder why the system update pra-lx1c432b209 goes wrong? Can I try to install with twrp putting update.app in folder dload in microsd?
I have not done the root on the phone yet
Click to expand...
Click to collapse
Use hurupdater

I have this phone for a short time. could someone explain to me how to unlock the bootlader now and install recovery?